GS-WAVE Series - Bax
Contents
1. Upper Drive Unit 2 9 Lower Drive Unit CD INPUT connector Neutrik NL 4MPR Connector Engb Dimensions 919 mm 86 2 in 1549 mm 61 in 1071 mm 42 1 in Specifications Enclosure Type Hyperbolic folded horn subwoofer 12mm 0 5 THIS 1083 mm 42 6 in Frequency Response 35 Hz to 150 Hz Sensitivity 1 W 1 m 108 dB half space ominal Impedance 2x80 Power Handling 1600 W RMS 3200 W Programme Maximum SPL 140 dB cont 146 dB peak half space Dispersion Driver Configuration 2 x 18 inch 457 mm ferrite LF drivers Connectors 1 x Neutrik NLAMPR Dimensions WxHxD 1549 mm x 1083 mm x 919 mm 61 inch x 42 6 inch x 36 2 inch Weight 213 kg 469 7 Ib Enclosure 18 mm 0 7 inch birch plywood Finish Impact resistant Black textured polyurethane The specifications and design of this product are subject to change without notice 8 Engb WAV HORN specifications Product overview eee suoneoiioeds NYOH AVM Features Large horn extension for WAV SUB e Accurate amplification of the WAV SUB s bass reproducing high SPL low end without the need to increase the amplifier output e Delive2. 35 to 65 winter 40 96 to 70 96 summer e Do not store speakers at temperatures outside of the rated temperature range as doing so may cause the speaker to drop in performance or become damaged Storage temperature range 20 C to 55 C 4 F to 131 F e Do not use the product in locations subject to extreme fluctuations in temperature Doing so could cause the product to malfunction e When using room air conditioners or stoves to rapidly cool or heat room spaces take precautions to avoid excessive dehumidification e Avoid placing the speaker near areas such as windows as outside air can cause condensation to occur within the speaker his speaker system is designed for indoor use only To avoid electric shock hazard do not place them outside or in an overly humid area Caution in use e Do not use the speaker to output distorted sound for long periods of times This can result in a fire hazard e Do notsitor stand on the speaker e Do not put large or heavy objects on top of the speaker Please also remember that vibrations from subwoofer systems can shake other loudspeakers out of place which may present a toppling hazard e Do not attempt to use the product with the GS WAVE Series grille detached as doing so could result in damage to the product Consult a qualified professional for assis tance with removing the grille for maintenance purposes For Europe If you want to dispose of this product do not mix it with
3. and cause damage or injuries to persons nearby Do not attempt to stack devices together for use other than specified systems Such devices may become unstable and tip over or fall leading to injury Make sure to secure each device in place using the specified fixing hardware or other hardware to prevent them from tipping over or falling when stacking devices together Pioneer shall accept no liability for damage or injury caused by accidents resulting from Pioneer products tipping over or falling due to them being insufficiently secured e Switch off and unplug your power amplifier and consult the instructions when connecting up components Make sure you use the correct connecting cables e Keep magnetic objects such as screwdrivers or steel parts away from the tweeter and woofer speakers Since the speakers use strong magnets the objects may be attracted causing injury or damaging the diaphragm e Do not install the speaker system in areas exposed to direct sunlight or near heating appliances Such conditions may result in shrinkage of the wood materials and finish leading to deformation of the enclosure discolouration or damage to the speakers Conditions considered unpleasant by humans are detrimental to speakers as well Providing a comfortable environment for the speakers will assist them in demonstrating their best performance Please maintain the usage environment as follows Temperature 15 C to 25 C 59 F to 77 F Relative Humidity
4. be taken out and used to attach either special mounting hardware designed for the product or commercially available mounting hardware Ensure that the floor or stage surface in question can withstand the weight of the product Consult a qualified professional for advice if the strength of the surface is unknown e Check to make sure that the mounting hardware is strong enough to support the weight of the product when using the special hardware designed for the product Make sure to read the Introduction section in this manual and the instruction manual for the mounting hardware thoroughly before proceeding Take every precaution to prevent the product and associated parts from falling as they could cause serious injury if they fell onto a person e After installation you must confirm that the speakers are safely installed You must also periodically check them to make sure that they are still safe e Make sure to use mounting hardware of sufficient strength to secure the speaker in place when using non designated hardware The speaker could fall causing acci dents if not properly secured e he grill is constructed so that it can be detached and if it is not attached securely it will become detached and fall causing an injury WARNING e Donothang the grill from the ceiling It may fall causing an injury e When this product is placed in an elevated place such as on a stage a speaker may be moved by vibrations and fall to the floor causing
5. coaxial neodymium compression drivers Connectors 1 x Neutrik SpeakON NL4MPR Dimensions WxHxD Cabinet 1153 mm x 573 mm x 515 mm 45 4 inch x 22 6 inch x 20 3 inch Depth incl the acoustic lens 707 mm 27 8 inch Weight 11 kg 156 6 Ib with the acoustic lens Enclosure 18 mm 0 7 inch birch plywood Finish Impact resistant Black textured polyurethane The specifications and design of this product are subject to change without notice SN31 AVM Engb 15 WAV TWPOD specifications Product overview Features e Omnidirectional super tweeter pod to reproduce ultra high frequencies from overhead e Expands the depth and space of the system and gives the impression of a larger room Connections The INPUT connector used is a Neutrik NL4 SpeakON connector e Refer to the internal connection diagram and make the appropriate connections as shown Internal connection diagram WAV TWPOD Top view INPUT 3 3uF 630V y BI Drive Unit BI Drive Unit mM BI Drive Unit Non connection m 200 Drive Unit 1 INPUT connector Neutrik NL Connector 16 Engb Dimensions 226 mm 8 9 in 226 mm 8 9 in 234 3 mm 9 2 in 9 GOdML AVM Specifications Enclosure Type Omnidirectional t
6. general household waste There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment recovery and recycling Private households the member states of the EU in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer if you purchase a similar new one For countries not mentioned above please contact your local authorities for the correct method of disposal By doing so you will ensure that your discarded product undergoes the necessary treatment recovery and recycling and thus prevent potential negative effects on the environment and human health K058b A1 Engb Engb 3 The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level a level that lets the sound come through clearly without annoying blaring or distortion and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound so what sounds normal can actually be loud and harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts ESTABLISH A SAFE LEVEL Set your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly without distortion e Once you have established a comf
7. 1 PIONEER EUROPE NV Haven 1087 Keetberglaan 1 B 9120 Melsele Belgium TEL 03 570 05 11 PIONEER ELECTRONICS USA INC P O BOX 1720 Long Beach California 90801 1720 U S A TEL 800 421 1404 PIONEER ELECTRONICS ASIACENTRE PTE LTD 253 Alexandra Road 04 01 Singapore 159936 TEL 65 6472 7555 PIONEER ELECTRONICS AUSTRALIA PTY LTD 5 Arco Lane Heatherton Victoria 3202 Australia TEL 03 9586 6300 PIONEER ELECTRONICS THAILAND CO LTD 17th FI KPN Tower 719 Rama 9 Road Bangkapi Huaykwang Bangkok 10310 TEL 66 2 717 0777 PIONEER TECHNOLOGY MALAYSIA SDN BHD 16th Floor Menara Uni Asia 1008 Jalan Sultan Ismail 50250 Kuala Lumpur TEL 60 3 2697 2920 E Rs 0 3 DI ZR a 407 5 8 4 TEL 886 0 2 2657 3588 KRET Se AAA BB ILE RB 909 5 5 TEL 852 2848 6488 PIONEER GULF FZE Lob 11 017 Jebel Ali Free Zone PO Box 61226 Jebel Ali Dubai TEL 971 4 8815756 PIONEER ELECTRONICS DE MEXICO S A DE C V Blvd Manuel Avila Camacho 138 10 piso Col Lomas de Chapultepec Mexico D F 11000 TEL 55 9178 4270 PIONEER INTERNATIONAL LATIN AMERICA S A Plaza Credicorp Bank 14th Floor Calle 50 No 120 Panama City 0816 01361 Republic of Panama TEL 507 300 3900 PIONEER KOREA CORPORATION PKC eLjorza or 121 020 amp 8A O27 545 105 219 989 TEL 02 777 8005 2013 PIONEER CORPORATION All rights reserved lt DRB1696 A gt
8. Pioneer GS WAVE Series User s Manual WAV SUB Multi fold hyperbolic horn subwoofer WAV HORN Large horn extension for WAV SUB WAV LOW Dual 15 inch high power upper bass box WAV LENS Acoustic lens with coaxial compression drivers WAV TWPOD omnidirectional super tweeter pod Contents Introduction FS 3 Installation 4 POU 4 Men 5 D WAV SUB specifications ee eus CW IT a 1 CUN 7 EN its 1 E Idcm T ENTM 8 A E EE E E EEE E 8 D WAV HORN specifications Product OVE IV IEW MP E 9 RC ct DIMENSIONS tener ener 10 SC allolTS 10 WAV LOW specifications OV EP Tie ence 11 11 CONNECTIONS TOS TOT tT 11 DIMENSIONS ws 12 SPECICATION abertura eA Erud 12 5 WAV LENS specifications Product OVerV EW MT 13 CONNECCION 13 Bcc S METTE 14 Angle adjustment mechanism fo
9. an injury or accident Take meas ures to prevent a speaker from sliding off a stage etc 4 Engb About GS WAVE series J5 O Overview Q Features e The ultimate club system the 3 metre GS WAVE floor stack delivers a warm solid sound you can feel Engb 5 1645 5 mm 64 8 in 3466 mm 136 5 in 2443 mm 96 2 in The mounting hardware is sold separately Contact the installer for assistance 6 Engb WAV SUB specifications Product overview suonea2ii2eds gns AVM Features e Hyperbolic subwoofer with 18 inch LF drivers e 3 metre folded horn that efficiently amplifies the sound from the drivers to deliver a robust high impact sensory bass with minimal distortion e Highly rigid 18 mm thick 0 7 in thick birch plywood cabinet structure Connections The INPUT connector used is a Neutrik NLA SpeakON connector e Refer to the internal connection diagram and make the appropriate connections as shown Internal connection diagram INPUT WAV SUB Rear view 1 27 1
10. ck them to make sure that they are still safe e Make sure to use mounting hardware of sufficient strength to secure the speaker in place when using non designated hardware The speaker could fall causing acci dents if not properly secured e The fall prevention wire must be attached to a suitably strong location The strength of the location to which the wire is attached being insufficient can lead to the speakers falling or cause accidents The fall prevention wire and screw to attach the fall prevention wire to the ceiling or wall are not supplied with the speakers so please purchase them separately e Tohang WAV TWPOD from the ceiling use the eye bolts attached to the product to attach a chain that has sufficient strength Furthermore be sure to attach a fall prevention wire that has sufficient strength WARNING Before hanging the product from the ceiling make sure in advance that the ceiling has enough mounting strength to be able to withstand the weight of the product If the equipment was to fall it would be very dangerous and may result in a serious injury When hanging the product from the ceiling be sure to attach a fall prevention wire that has sufficient strength to the eye bolts that are not used for the chain Do not put the WAV TWPOD on top of the speaker etc Ground Stacking except for WAV TWPOD e GS WAVE series products come with pre inserted hardware mounting screws for stacking products together These screws can
11. for the amplifiers connected to each speaker system In order to prevent damage to the speaker system resulting from input overload please observe the following precautions e Do not supply amplification power to the speaker system in excess of the maximum permissible input which could damage the speaker and cause a hazard from overheating e Only connect turn ON or OFF the audio system or any one part such as Du player and Mixer when the power to the amplifier is turned off If any operations are performed while the amplifier is turned on there is the possibility of damaging the treble frequency speaker unit e When using a graphic equaliser to emphasise loud sounds in the high frequency range do not use excessive amplifier volume e Donottry to force a low powered amplifier to produce high sound levels as the amplifier s harmonic distortion will be increased and you may damage the speaker e Furthermore any devices or objects easily affected by magnetism floppy disks magnetic cards magnetic tape etc should be kept well away from the speakers Caution installation e Ensure that the floor or stage surface can withstand the weight of the system e The installation technician must follow professional installation techniques to protect the speaker system against falling e When installing the speakers make sure that the wall ceiling is strong enough to support the speakers e Improper installation of the speakers could cause them to fall
12. n design which is attached to the lens to deliver wide and even coverage across a large frequency range e A uniquely shaped acoustic lens that diffuses high frequency sound waves horizontally and vertically while maintaining crystal clear and extremely comfortable sound Connections The INPUT connector used is a Neutrik NLA SpeakON connector e Refer to the internal connection diagram and make the appropriate connections as shown WAV LENS Rear view INPUT 1 1 1 INPUT connector Neutrik NL 4MPR Connector Engb 13 Dimensions 11535 mm 454 in Acoustic lens 561 mm 22 1 in 573 22 6 12 0 5 in Angle adjustment mechanism for the WAV LENS With the WAV LENS only the acoustic lens can be tilted downward while the main unit is installed and secured 41 7 14 Engb Specifications Enclosure Type Mid high box with acoustic lens Frequency Response MF 1 kHz to 6 kHz HF 6 kHz to 16 kHz Sensitivity 1 W 1 m MF 115 dB HF 113 dB Nominal Impedance MF 4 40 Power Handling MF 250 W RMS 500 W Programme HF 160 W RMS 320 W Programme Maximum SPL MF 139 dB cont 145 dB peak HF 135 dB cont 145 dB peak Dispersion 110 H x 50 V variable range of the lens in the vertical direction 20 Driver Configuration 2x2inch 51 mm exit
13. nector e Refer to the internal connection diagram and make the appropriate connections as shown WAV LOW Rear view Internal connection diagram Pu Ps INPUT 1 L il Upper Drive Unit 1 Lower Drive Unit o 2 PEE SE gt ol CD INPUT connector Neutrik NL 4MPR Connector Engb 11 Dimensions 1529 mm 60 2 in Specifications 905 mm 85 6 in Enclosure Type Back loaded horn low mid box Frequency Response 50 Hz to 2 kHz Sensitivity 1 W 1 m Nominal Impedance 103 dB half space 2x oo Power Handling 1200 W RMS 2400 W Programme Maximum SPL Dispersion 134 dB cont 140 dB peak half space Driver Configuration 2 x 15 inch 381 mm ferrite LF drivers Connectors x Neutrik SpeakON NL4MPR Dimensions WxHxD 529 mm x 905 mm x 793 mm 60 2 inch x 35 6 inch x 31 2 inch Weight 19 kg 394 7 lb Enclosure 8 mm 0 7 inch birch plywood Finish Impact resistant Black textured polyurethane The specifications and design of this product are subject to change without notice 12 Engb WAV LENS specifications Product overview SN31 AVM Features e Mid to high frequency box with two coaxial compression drivers e Pioneer s exclusive hor
14. ortable sound level set the dial and leave it there BE SURE TO OBSERVE THE FOLLOWING GUIDELINES e Do not turn up the volume so high that you can t hear what s around you Use caution or temporarily discontinue use in potentially hazardous situations e Do not use headphones while operating a motorised vehicle the use of headphones may create a traffic hazard and is illegal in many areas S001a A1 Engb Installation guidelines WARNING This speaker system must be installed by a qualified technician as it involves such tasks as selecting a location for installation drilling holes in walls ceiling wiring and painting Have the installer carefully follow the installation instructions Certain technical skills are required to install the speaker system Please have the product installed by a professional Pioneer is not responsible for any loss or damage that results from improper installation insufficient strength of installation materials misuse modification or natural disasters Rigging and suspension WAV TWPOD e GS WAVE series products come with pre inserted hardware mounting screws These screws can be taken out and used to attach either special mounting hardware designed for the product or commercially available mounting hardware e Use screws suitable for ceiling material and screw mounting parts in solid locations e After installation you must confirm that the speakers are safely installed You must also periodically che
15. r the WAV LENS senes 14 SSC 651 eode eu ber du dete 15 D WAV TWPOD specifications ProdUCUOVETVIEW eU MEI 16 P 16 Sele cio eld TO metre rare Teeter tear 16 DIMENSIONS NT Tn 17 SS CONN S ome PUR Beo 17 Additional information About trademarks and registered trademarks sss 18 2 Engb Introduction WARNING This speaker system must be installed by a qualified technician as it involves such tasks as selecting a location for installation drilling holes in walls ceiling wiring and painting Have the installer carefully follow the installation instructions Certain technical skills are required to install the speaker system Please have the product installed by a professional Pioneer is not responsible for any loss or damage that results from improper installation insufficient strength of installation materials misuse modification or natural disasters Thank you for buying this Pioneer product Please read through these operating instructions so you will know how to operate your model properly After you have finished reading the instructions put them away in a safe place for future reference Before you start e Make sure to use amplifiers with rated load impedances that match the speaker impedance
16. ry of subsonic low frequency sounds and a high acoustic pressure with no effect on the speed of the WAV SUB s 18 inch drivers Engb 9 Dimensions 1549 mm 61 in 726 5 rnm 28 6 Iri 2443 mm 96 2 in 1071 mm 42 1 in 1083 mm 42 6 in Cio NO Specifications Enclosure Type Extended horn for WAV SUB Frequency Response Sensitivity 1 W 1 m Increased sensitivity using a pair of WAV SUB subwoofers producing an extra 5 dB at 50 Hz Nominal Impedance Power Handling Maximum SPL Dispersion Driver Configuration Connectors Dimensions WxHxD 2443 mm x 1083 mm x 726 5 mm 96 2 inch x 42 6 inch x 28 6 inch Weight 125 kg 275 6 Ib Enclosure 18 mm 0 7 inch birch plywood Finish Impact resistant Black textured polyurethane The specifications and design of this product are subject to change without notice 10 Engb WAV LOW specifications Product overview suonea2ii2eds AOT AVM Features e Dual high power upper bass box with 15 inch drivers e Features a back loaded transmission line design e Provision of a low to mid range sound with tight and punchy kick Connections The INPUT connector used is a Neutrik NLA SpeakON con
17. weeter array Frequency Response 5 kHz to 20 kHz Sensitivity 1 W 1 m Nominal Impedance 100 dB 8Q Power Handling 100 W RMS 200 W Programme Maximum SPL Dispersion 120 dB cont 126 dB peak Omnidirectional Driver Configuration 4 x 1 5 inch 38 mm exit ferrite compression bullet tweeters Connectors 1 x Neutrik SpeakON Dimensions WxHxD 226 mm x 201 mm x 226 mm 8 9 inch x 7 9 inch x 8 9 inch not including eyebolts Weight 10 kg 22 Ib Enclosure 18 mm 0 7 inch birch plywood Finish Impact resistant Black textured polyurethane The specifications and design of this product are subject to change without notice Engb Additional information About trademarks and registered trademarks e Pioneer is a registered trademark of PIONEER CORPORATION e SpeakON is a registered trademark of Neutrik The names of companies and products mentioned herein are the trademarks of their respective owners 18 Engb PIONEER CORPORATION 1 1 Shin ogura Saiwai ku Kawasaki shi Kanagawa 212 0031 Japan INAALPRABA T 212 0031 6 1 1 1 1 212 0031 125040 26 7 495 956 89 0
Download Pdf Manuals
Related Search