AC300 User Manual
Contents
1. 0001 the voice of the number must be speech synthesis of real people prior input 0 9 numerical voice 2 Failing verification Number absence please press finger again please replay card please input password again Volume mediation Namely regulation of sound volume Keypad tone If choose yes press key has sound otherwise not 4 2 2 Expert settings Display this menu only when the super administrator access to 20 4 2 2 1 Checking interface settings Whether to real time photographing If choose Yes you have to set up to preserve the ratio of real time photographing which are as follows 1 0 no save 2 30 3 60 4 100 save all Whether to display photos Real time fingerprint display settings When choose yes in the registration of fingerprints and fingerprint mode authentication 1t shows corresponding true fingerprint image Choose No it does not show 4 2 2 2Delete all records Delete all validation records 4 2 2 3 Delete all registered data Delete all registration records delete all users only leave 00 000 user which the system default 4 2 2 4 Restore the factory settings Restore all settings message to the state of leaving factory default state 4 2 2 5 Firmware upgrade This option can upgraded the terminal unit select upgrade file of U disk Click OK to upgrade 4 2 2 6 Daylight saving time settings In order to meet the needs of daylight saving time of2. Photographing Whether to exist record 4 1 2 Deletion of registration recording Explanation 1 After entering this menu firstly prompts to input deleting a user ID After confirm enter into the following interface 2 OK select ESC Back Note 1 No 00000 super administrator can not be deleted 2 The administrator may not delete other administrator only can delete their own 3 Super Administrators can delete all users information except No 00000 super administrator 4 May delete some information of user registration select delete all then remove the user completely from the system 4 2 Settings 4 2 1Basic settings Clock settings Explanation 19 1 Including date and it s form and time settings default form is Y Y MM DD24H 2 Offer date forms which support at least 10 types YYYY MMDD YYYY MM DD YYYY MM DD MM DD YYYY MM DD YYYY DD MM YYYY DD MM YYYY YYYYMMDD Language settings Explanation language that is displayed on the screen menu of setting fingerprint machine voice also should be amended accordingly but currently do not support Default simplified Chinese Voice prompts If choose yes there has corresponding voice hint on the device If choose no only have DD buzzer The voice document is mp3 or wav format approximately have 1 Successful verification May play if having recorded voice of the user otherwise play user number hint such as
3. Introduction 25 Settings for each user is compose of one sub group group time sect and user time sect Grouping means assign a group of users to some group for example Group 1 Group 2 etc choose three set time sect at most in group time sect there is or relationship among these three time segment that is to meet any of the three is ok choose three set time sect at most in user time sect there is or relationship among these three time segment see User Access Control settings for relationship between the using group time sect and user time sect In short the conditions for registered users to open the lock 1 The group that user located must be in the unlocking combination if you implement unlocking combination settings 1t demands verify with personnel of other groups in the same unlocking portfolio then you can open the lock 2 the current unlocking time should be in any effective time zone of the user time sect System default the new registered user as the first group and default grouping for the first group the time sect of default group is 1 In the case of leaving factory state of the Group 1 and time 1 default new registered user is to unlocking state If users modify the settings related to access control the system shall change with the diversification by users If there is no grouping of users in the unlocking combination settings the user can only check on work and can not unlock 4 3 1 Time sect setting
4. Set default validation mode of the device Namely choose any kinds of combination mode of ID number fingerprint password ID Mifare card default single fingerprint there are 6 types to select Only can choose one type See authentication mode for details 4 3 3 User door contact settings Set affiliated user group time sect of the using group user time sect validation mode of the using group 27 personal authentication mode in accordance with needs of the user grouping divide registered users into several parts according to roles in order to facilitate management time sect of the using group whether or not to use default time sect of affiliated group by the user time sect of users set time of unlocking namely choose the set time number authentication mode of the using group Whether or not to use validation mode of affiliated group by the user Personal authentication mode Choose an authentication mode no other than using group validation mode the personal validation mode shall effective Note 1 the relationship between the time sect of using group and the user time sect whether or not be effective only on the following user time sect in time sect of the using group 1 If the time sect of the using group is yes the user time sect shall evaluate as the time sect number of affiliated group automatically the group time sect should be set firstly 2 if modif
5. Split networking mode doorbell annunciator OUT switch access control machine door contact electric controllock Explanation Connection mode of extensions network cable provides with the power supply of terminal unit the terminal 36 unit need no Power cell 6 2 Networking mode of unity machine door bell apnunciator OUT switch IV pi control door contact electric control lock L 6 3 Networking mode of fingerprint read head 37 naor bell An OUT switch ee To access control Wiegand controller machine door contact a Voltage E _ electric control lock i 7 Transferring line mode illumination of terminal units network 1 Terminal equipment has two transferring line methods one is split transferring line mode the other is transferring line mode of unity machine 2 In split transferring line mode communicating with upper computer only has two modes one is TCP IP the other is the RS485 Split transfer mode for networking mode of the split The network connection process in split mode is network input controller terminal unit RS485 communicates directly with upper computer by terminal unit 3 the transfer mode of unity machine is used in networking mode of unity machine and Wiegand In the mode of unity machine it can communicate with upper computer by TCP IP RS485 RS232 When RS485 and RS232communicate with upper computer RS485 and RS232 can not be used at the s
6. not effective When succeed it is effective The following registration dialog box is the same as this button After succeed press up After succeed press down arrow Turn green after arrow no save current save current fingerprint then register Show real time each success all fingerprint re register the next fingerprint this fingerprint number 1 Examnle 00001 1 3 times together again No change of the fingerprint fingernrint No ID Mifare card registration RF card registration dialog box Choose 2 RF card to register then may enter into the following dialog box 1 If the RF card has been registered and prompts RF card is in existence whether or not to re register Dialog box is shown as below After confirm enter into such dialog box Voice tips Please show card after succeed judge whether or not repeat if not prompts successful registration of RF card if repeat prompts repeat card number please show card again cycle by cycle until reach success or cancel 1 OK Select ESC Back ARetry Original sound REC Through recording real voice of the person usually my name as voice prompts when verify so that current staff can further confirm the miscarriage of justice thereby reducing the rate of miscarriage of justice It is certainly faster and more accurate than demonstrate their
7. photos Original sound REC dialog box Choose 3 original Sound REC then may enter into the following dialog box 1 if the original sound has been recorded and prompts the voice had been recorded whether or not to re record Dialog box is shown as below 15 After confirm enter into such dialog box Voice tips 39 Please say your name after succeed prompts successful record if not successful prompts Please re record cycle by cycle until reach success or cancel Display file name number voice wav mp3 Photographing The photo is 320 240 24b size control within 16k jpg form Photographing dialog box Choose 4 photographing then enter into the following dialog box 1 If the user s photo exists and prompts the photo had been recorded whether or not to re record Dialog box is shown as below 16 After confirm enter into such dialog box Real time camera before taking pictures show photos after taking pictures If not satisfied press the UP arrow A may take pictures again at this time re voice OK Select ESC Back A re photographing and re text prompts gt start photographing 17 Registration flow Enter user registration Enter dialog box system show default No May modify etc information Whether to modify No FP Enroll ID Mifare card Whether to exist Y Original sound
8. some countries regulate an hour faster on XX minute XX hour XX day XX month when on XX minute XX hour XX day XX month regulate one hour slower The beginning of daylight saving time the beginning time for implementing the daylight saving time 21 The end of daylight saving time the end time for implementing the daylight saving time Correction time different with the current time Example The current time is 16 07 April 9 The beginning of daylight saving time Set for April 1 The end of daylight saving time Set for May 1 Correction time set to 1 hour Back to the checking work attendance interface display the time 2009 4 8 16 07 4 2 2 7 Keypad tone settings Function keys can be set as features include overtime registration off duty registration work registration view system information alarm belling query records go off entering return out overtime work leaving Default definition state transition of the system Fl work attendance F2 check back from work F3 overtime attendance F4 signed back to overtime work Here the function key is shortcut you can switch directly to the needed state through these function keys without the need to do those tedious operation 4 2 3 Power supply management Time starting up The equipment automatically opens within specified time Run the function only in power off and time dormancy state Time power off The equipment automatically closes within specified time All ot
9. 21 4 2 2 2Deletezall records nice 21 4 2 273 Delete all registered data tii A Sa A SR rn 21 4 2 2 4 Restore the factory setings svssdeccscecdessadeGucescaeddassntedecoescesdasdudeSucoeseesdacenvedecesscestasdudesnedungedtastaceguensede 21 4 2 2 5 Firmware Up Stade iii a bbs 21 4 2 2 6 Daylight saving time settings ccececsccesssceesseeesseessneeeeseceseeenseecsseeessceceeseeesseeessaeeneceessaeeeeseeenaeees 21 22 T Keypad tone seines genri en era e a a a eavcesat ectessers 22 422 3 Power supply Management adas 22 Time starting UP A a A teed es E ri 22 TPIS Power otura a ale ee el aaa Lele oe Seeds hart ad 22 EMS COLMAN CY aenneren anne a hace ee eels 22 Belling SUE ui RS LAS PE SS AU Be A A ee ahah 22 Free time Settings ici aa a 23 NT IAN RRA NON 23 UCA sestegevedutant eaeasye Nested aeeateyedueante des heed aaah eager eauieests 23 ADA OMAN ICAO SSUES ia A AS eet tein vd dee ieee 23 Machine number icccccccsssietsisesertiescvetesanesetecsneuntedaneuoteueneuetesutesstosntesnta Gunessteueasetaueaeustegedeuet esenededeustacntesntennts 23 1S 2 Deen to lee a re trae tenet tl TE pe lo el e teeter ec tee 23 A O 23 Baud Tte 24 II AN 24 TP E LE E AAEE r a toa ade 24 Subnet mask E P A E A wees toda noes tad AE E A E E E E 24 Gateway address its IS a a RA a E eRe AN IAEA AA A e a a 24 Connection pas Md iiaii i Ea EE EEE TEE E E E E SE E S 24 Dynamic IP allocati0N oooonnnconoocononcncononcnonncnonncnononnononcn
10. 3 10 Back function settings Judge whether or not to back in accordance with the latest in and out records in and out must be matched It demands support of host computer and slave see host computer and slave Example Somebody wants to go out 1 if his latest record is not go in the machine shall prompt refuse back and refuse to open the door 2 if his latest record is go in he can open the door after authenticate the fingerprint Back in and back in and out have similar logic 4 3 11 Binding ID Use on the connection of extensions communicate with extension in the case of the binding number is right 31 4 4 U disk management USB flash disk management Y gt Download validation records Download management records Download user information Upload user information Upload message notification Upload mp3 4 5Alarm reset When the machine is not alarm the menu has no option of alarming only the machine begin to alarm option alarm reset shall appears in the menu select the option to lift the current alarm status 4 6system information 4 6 1 User registered number 4 6 2 Fingerprint registered number 4 6 3 Checking record number 4 6 4 Management record number 4 6 5 Used memory 4 6 6 Residual capacity Registered user number Registered fingerprint number Checking record number Management record number Residual memory 32 4 6 7 Device Information Fingerprint capacity
11. Note capacity Management record capacity Memory capacity Leave factory date Serial number Manufacturer Device name Device model Arithmetic version Firmware version 4 7 Query and pivot Checking recording Query Support query according to date number name Display in report forms Management recording query Support query according to date number name Display in report forms User registration inquiries Support number fingerprint ID MIfare card query Display in report forms 33 5 Connection mode of external port 5 1 description of external port 2 E Go 8 n N w ma Combination mode of links j RS232 connection method RS232R RS232T GND RS485 connection method RS485A RS485B connection mode of Wiegand GND DATAO DATA connection mode of the bell BELL BELL connection mode of OUT switch BUTON GND connection mode of door contact DOORSENSOR GND alarm connection mode ALARM ALARM connection line of the lock LK COM LK NO LK NC connection line of the bell BL COM BL NC BL NO 5 2 Connection mode of lock and electric bell 1 connection mode of normally electrified closed lock Power supply adapter 12V 34 2 connection mode of normally electrified opened lock Power supply adapter 12V Power supply adapter 12V 35 4 connection mode of normally electrified opened electric bell Power supply adapter 12V 6 Networking mode 6 1
12. User Manual AG300 Version 1 0 Contents Mi A A O E A Me cade 5 1 Compiling Intentar OA AA aes ele ee ieee Sais Atenas 5 DZ SCAT GUND ccs aca de RN 5 LMG MIAN IMLS El AC Co 5c gantca tenes Vonecuts conten A 5 4 Structure and module of Application oo ccccecesssssnsccccecececsssssenaccecccccsssssentececsescesssssnteneeeeess 6 AAPP O s 11 AT L User RE USEPA ELON asu 11 EMB aaa 14 ID Mifare card registration ooooonoocononcncononcnonncnonconononnononcnnr a a a non aiaa a cnn nn aiiai 14 Ortgmal sound RE cin foi Ga oa eee iaa ios 15 A O NE eS 16 4 1 2 Deletion of registration recording cccecscccssscessceeeecesseeeeseecescecscecseseeeeseeceseecsscesseecsseeesesseeeseeeseaeeseaeeeaes 18 A DS SUING A cota een e o o a 19 AI n T a e e 19 Clock Settings a a e Sa 19 Language A ira 20 VOICE 0 50 00 0 reper tence ria T o tale oe aleta dale ale a le ele NE 20 Volume Medi old 20 Keypad tone ii A ASS A A a 20 4 2 2 Expert Settings cs 20 4 2 2 1 Checking interface settings ooooocoooocnonocoonnononcnconencnnononnnncnon conan nn non nn cnn n nono nn cnn n nr non rn nn rr can nn cnn nnrnnnrnnannos 21 Whether to real time photographing oooooccconccnoncccononconnncnoncnnoncnnononcnnnncnnnnononnnnonnnnan nn cnn nnonn non nncnnnnnnnns 21 Whether tordisplay POOL O A Reais ca eee 21 Real time fingerprint display settings ccccccsccssseceesseeeseeeeseeesseeceenecenseecsseecsseecseseeeeseeesseeeeeeeseneees
13. ach group group 1 2 3 pass time sect of the user authentication to be effective the door will open combination 2 Only 1 person person belongs to group 4 be on the scene the door will open combination 3 When person of each group group 2 4 pass time sect of the user authentication to be effective the door will open combination 4 When person of each group group 4 5 pass time sect of the user authentication to be effective the door will open combination 5 When person of each group group 1 5 pass time sect of the user authentication to be effective the door will open To sum up in unlocking combinations firstly staff of each group in portfolio should have the same effective period of time the door will open 29 Explanation No passing time zone of validation unselected time zone number of user unselected time zone number of group default time zone when using group time zone the validation time for user does not exist in any setting time zone define time zone as forbiddance Note if the time zone set by user is not passed answer for above combination 2 it appears prompt that user of Illegal sub portfolio can not open lock but may check on work attendance in group 4 there are other users meet unlocking qualification the combination 2 may open the lock Answer for above combination 1 3 4 5 it appears prompt that user of Illegal
14. ame time 4 RS485can communicate with upper computer at the same time 1t can be used on back function When user uses RS485 on back function it can not be connected with upper computer 7 1Connection mode chart of split transferring line rT 485 A TX rT 485B TX 38 ERA 232R RX EEES 232T RX rT 232T WG1 ET 232T WG0 7 2 Connection mode chart of transferring line of unity machine E 485A TX a el 485B TX E 232R RX Ey E 232T RX E 232T WG1 i 232T WG0 39 Instruction of controller 8 1explanation of controller external port chart CONTROL Method combinations of ports 1 OUT TCP output network cable this port connects with terminal directly 2 IN TCP input network cable this port connects with Router directly 3 Connection mode of out switch BUTON GND 4 connection mode of door contact DOORSENSOR GND 5 connecting line of alarm ALARM ALARM 6 connecting line of electric lock LK COM LK NO LK NC 7 connecting line of electric bell BL COM BL NC BL NO note NO normally opened connection NC normally closed connection Please refer to 5 2 for the connection mode of electric lock and electric bell 9 Basic concepts and explaination No trouble found Fingerprint device identifies the fingerprint of user A to user B 40 Refuse to found Fingerprint device refuses the registered fingerprint Permission rank Serial fingerprin
15. connection password up to eight digits at most Dynamic IP allocation Back stage address PC back stage address is the address of upper computer it can control the host computer of terminal unit there is need to enter the IP address of this host device 24 4 2 5 Recording settings Management recording alarm alarm When the value of remaining management record capacity arrives at setting standard the equipment will automatically prompt a warning message of remaining record Checking recording alarm alarm When the value of remaining record capacity arrives at setting standard the equipment will automatically prompt a warning message of remaining record Repeat affirmed time In the set time range unit minutes such as there has existed one person s attendance records then the second passed checking in result will not be saved 4 2 6 Automatic detection Test system components When equipment fails it has advantage to analyze failure reason thus maintain the equipment quickly and easily Including testing memory LCD screen voice fingerprint collector keyboard and the clock in the testing process should ensure the stability of power supply or else they might damage the system hardware especially during the storage testing process Run all tests Memory test LED function test Voice test Fingerprint collector test Key board test Real time clock MP3 function 4 3Access control function settings
16. dE ES 34 5 1 description of external Port ooooonoocccoooccnonncoonnononnnnonononnrnonnnnononnnnon rn a a a a E a A E a E E a 34 5 2 Connection mode of lock and electric belli anuceninnninnnanii e a N A canos 34 6 N twoiking Mod A a Aaa 36 6 1 Splitnetworking Modem 36 6 2 Networking mode of unity Machine cee ccecccssssceeneceeseeeeseecsscecssceceesecesaeceseeeseaeeseneeeeseesseeeesaaeceeseeeeeeeneeessaeenes 37 6 3 Networking mode of fingerprint read head ce eecccesscesseeesseeeeececesseeesseeceseecsceessneeeeeeeseecsceesesseeeseeeneeenseeenes 37 7 Transferring line mode illumination of terminal units network eee eeceseceeeneeeeeeeeecneeeaeeeseeseeeaeenaes 38 7 1Connection mode chart of split transferring lIME o ooocnonccnoncccononcononcnonncoonnnnononcnnnncnnnncnonnonon nn nonnnon nn rca nn rn nnnnnnnnnns 38 7 2 Connection mode chart of transferring line of unity Machin ooooocccnonocionncnoncnconnncnnnncnon conan cnnononcnnnncnnnncnannnnancncnns 39 S Instr ction of controller mennie a E E E A E E A ERa 40 9 Basic concepts and explaination AA iiri a a i A a aia 40 N trouble found A NON 40 Remec to TOUNG aanroer a e E A E ES AAE 41 Permission Tanker tena ena n E A ERAO 41 Mode keye a A S 41 Message notification inge 41 Host computer and sla Eaa aa aa a a a aa a a a E A A E aAa 42 Daylight saving time time zone settings o c cececceccsccssescesesecsesecseescacsscsecsesacsecsecsecsesacsscsecsesscsacsecsecse
17. eesscecsceceeseeeeseeesseecssceceeseeeeeeeseeensaees 30 43 8 Duress alarm Settings A A Hee ee ee 30 Duress Tin serprintmana Cem EN eheses an Ka A eevee ee 30 Password inspection alarmi osno nonea a rE EE E E E ES E E ENE E E Eri 31 Press koy le a a ef o a e o e e el A an 31 Alarm delay it abs 31 AAA A A eee decid 31 4 3 10 Back fiinction Settings coca A aa ENE i 31 4 3 11 Binding ID eee E E E EA 31 4 AW disk mana mentalidad losas rei 32 a eS NEEE E N E T A S AE sinha S NAN T OS NE S A S A NASA S TA 32 4 OSYStEM INFOTMALION NN 32 4 6 1 User registered number ccccccesceeseceesseeeseecesnecescecenseeesseecsscecsceeseseeenseecesaecnsecsseecsneceenseeesseeensaeeseeeeaes 32 4 6 2 Fingerprint registered NUMbET cccccsscccesseceesceseccsnscecesuscessecseseesusceseauecesuecscecseseesusceceaueceaeecseseeseaeesats 32 4 6 3 Checking record Numbers xf 24ei a E AAA edt ek 32 4 6 4 Management record number ccc eescccesceessccssceeesecesseeesseecsseeesseeeesseeesseeceseeenscecseaeeseseeeeaeeceseecseeeseeeennes 32 4 6 5 Used Memory ccccccssccessccssseessseessreeeeeeceseeesseecsscecsesecenseeesseecnscecssceneecssaeeseseeenseeessaeeeeeseeenseeseeesseseeseaeeenaes 32 46 6 Residual Capac td a 32 IO E NS 33 4 T Query and PIV Oi E 33 Checking recording OU y a E a a a a aaa a a aa a a a a a a a a a ii 33 Management recording QU A A 33 User registration IO QUIE el aie oie veg whee tia 33 5 Connection mode
18. egister fingerprint three times is success In accordance with the message voice and text press the same finger enter the password twice three times continuously If it fails indicating a failure and prompts re registration 8 Choose ID card or Mifare card in accordance with the device configuration 9 When register fingerprint or RF card as there have such fingerprint or card number in the system the system will refuse to register suggesting that repeat fingerprint or duplicate cards Basic Information dialog box Once choose the user registration can enter the following dialog box 11 al _ Default empty Password must be six figures default 888888 ID PWD Contin Default empty only the option subject to sector configuration files Privilege Section gok Default ordinary user choose by the down direction keys Q OK Sel ESC Back F2 Save F3 Next Intermediate user Administrator Super administrator 1 The default code at this point the last No automatically add 1 the name is empty there must be six figures default 888888 password the user level is general 2 Number may input by users if enter a password the password and confirmed password must be the same 3 If it is non new registration may targeted by this user ID and then modify the name password user level department cards photographs original sound or fingerprint backup 4 In any input state F4 is a removal ke
19. gister several fingerprint it shall display Once identified enter into the following interface _ ae User ID 00001 Name these ones in green RF card register original sound REC having photographing setting is green otherwise it is white Display according to registered order no more than ten Voice Photo oy Photo if user exists it shall display the photo otherwise default cartoon after photographing OK Select ESC Back show photos immediately Fingerprint registration Fingerprint registration dialog box Choose 1 Fingerprint registration then enter into the following dialog box Have voice tips at the same time s Please press finger after succeed it prompts please leave Please press finger in the second time after succeed it prompts please leave Please press finger in the third time after succeed it Number 0 9 Increase prompts please leave automatically may No successful it prompts please press finger again modify when input 0 9 After three times of success do not prompt successful fingerprint registration again If repeat tips repeated fingerprint The three ellipse box is empty Repeat tips please press finger cycle by cycle until succeed or cancel UserID 00001 Name Before succeed this button is gray OK key is
20. her modules are closed except the CPU core press the power button or to the boot time it start up In sleep mode Time dormancy The equipment automatically enters sleep mode within specified time All other modules are closed except the CPU core and key board press any key to wake up equipment in working condition Belling settings Belling Settings include beginning and ending time duration music Belling can be set 8 kinds of times you can set up time of timing belling in accordance with the needs when arrive at the set time the fingerprint machine will automatically ring then to reach the length of ringing it automatically cut off If ringing time is 0 the ring is closed Otherwise ring according to setting time and length Two ringing ways 22 1 from the loudspeaker of machine itself 2 Comnect electric bell with a fingerprint machine when arrive at the set time the machine shall send out a relay signal to trigger bells ring Free time settings 1 Free means that users do not use terminal equipment 2 Including transit state choice and free time settings the two options are interrelated when the free time to 0 the free setting function is turned off when the free time is non 0 value in minutes such as 1 then if there is no any operation within 1 minute the system will enter free state of the specified settings 3 Free transition state include sleep and shutdown Locking off key Failure to power b
21. ity Standby time Serial number Manufacturer Device name Device model Arithmetic version Firmware version query Management recording query User registration Inquiries Press MENU key the following help column prompts administrator Please verify At this time administrator can be passed through pressing fingerprints inputting ID and password or swiping card to enter the menu such as authentication only proved to be successful can enter the main menu See 8 validation process for verification process Default the first as focus after entering the menu display borders on the focus icon with The direction keys moves the focus to the appropriate icon OK button can enter the corresponding submenu Each icon has a number press the corresponding number keys can directly enter this sub menu ESC can return to previous menu ESC of the main menu key can return to the initial interface Order shows the current menu and the full name of the selected sub menu it can show two levels of full name 3 Daa Me a S a Icon shows 4 Chinese characters at best use the first three Chinese characters substitute Chinese characters more than four 7 Press MENU key states can back to the main interface in any menu states enter the main menu interface at other main interface states Start Input Method Editor in other states Currently shows that selecting full name of sub menu Sysinfo Search Show cu
22. more than 5 28 Unlocking combination settings Set different unlocking group combinations each combination is composed of the different group The unlocking combination use group number directly without regard to validation order of every group Such as 123 means 1 group 2 groups 3 groups 1t demands at least one user in each group to validate together that can open the lock 4 means one user of the single 4 groups passes the validation then to open the lock at one time the system may define 10 kinds of combinations at most only one of them can pass is ok note The unlocking combination of initial system default is 1 Namely any person in group 1 can open default the new registered user can open Example 1 No setting leaving factory state the system default group 1 is unlocking combination 1 others are empty Definition of Unlocking combination Combinationl 1 Combination 2 Combination 3 Combination 4 Combination 5 Combination 6 Combination 7 Combination 8 Combination 9 Combination 10 Example 2 Ifuse certain groups to release lock set these groups in unlocking combination definition Definition of Unlocking combination Combination 1 123 Combination 2 4 Combination 3 24 Combination 4 45 Combination 5 15 Combination 6 Combination 7 Combination 8 Combination 9 Combination 10 From above scheme setting we can see that all set 5 unlocking combinations combination 1 When person of e
23. nrnonnn nono n nn non nn corn n cnn n nn non rr non ran n nn non r nn nnnnn naar nrnnnrnnannos 24 Back stage address coo ds ii A A a aiii 24 4 2 S RECO AMS SENOS is IS a thats Seeded 25 Management recording alarm alarM ooooononccn nncnonccnononcnnncnonncnonccnoncnnonononn nooo n nono nro cnn nn n nr can rn cnn rrnnnnncnnnnios 25 Checking recording alarm alarm oooooonnnccn nccnoncccononcnonncnnncnonnnnoncnnononcnnnnonnncn nro nan rn cnn n nono rn rn n rn corr ncnnnnnnan nos 25 Repeat attirmed time la oia oi a a A Meets 25 A A NN 25 4 3Access control function SettingSs ccccccccsssccessecesseecsseecssceceeneeenseecssaecsceceesecesseeesseecssaecseaeeeeseeesseesseeeneaeeeeseeensaees 25 4 3 1 AA 26 4 3 2 Grouping function SettINgS esere E e E e e OE eara oE ESTES 27 4 3 3 User door contact settings moer a Ps ladies erect 27 4 3 4 Unlocking combination SettiOgS oooocnooccnonccnoncnnonencnnnncnnnnononnononnnnonnncnn nn cnn nro nr rn n nn non rr cnn rn cnn nn naar nnnnnnos 28 Basic settings of unlocking combinati0N cooocccnnonocccnononnncnanenanananocinnnnnaconnnnnonnnnnnaconnnnnaconnnaninns 28 Unlocking combination SettidESaitatada aaa ana a oana 29 AID LOCK driVe IMEI AA AAA A AAA ata 30 4 3 6 Time delay of door contact oo ccc eeccceessceesseeeseeeesseesesecesseeseseeceseeesscecsneeeceeenseeesseeeesaeeseaeeseseeesteeenaeees 30 4 3 7 Door contact switch settings ccceesscessecssseesssecessecesseeenseecssa
24. nt somebody from compelling to open the door Duress fingerprint management Register duress fingerprint Register new fingerprint as duress fingerprint 30 Appointment of duress fingerprint Change registered fingerprint into duress fingerprint Cancel duress fingerprint Cancel single duress fingerprint Cancel all Cancel all duress fingerprints User specially registers a new fingerprint or appoints a registered one existed in fingerprint machine as duress fingerprint In any cases after compare with these fingerprints it may appear duress alarm Password inspection alarm Open or close such alarm function Press key help If choose yes to press key help give a long press on V key more than 3 seconds to produce SOS after press W key no more than 3 seconds then fingerprinting or press ID number if succeed in identity it shall appear duress alarm at one time If choose no to press key help give a long press on VW key is out of operation Alarm delay Defines automatic alarm time after appears duress alarm signal input alarm signal indirectly it can be defined and appear alarm signal automatically in a minute 0 255 seconds 4 3 9 Wrong press of alarm Set times of wrong press of alarm when validation is not passed and the wrong times reach the set value it shall alarm 0 is wrong press and have no alarm infinite and many times otherwise you may set 1 9 times default 3 times 4
25. ntication mode is ID password it prompts enter a password If the authentication mode is ID fingerprint it prompts press finger 3 Pressing finger or swiping card is generally direct verification Please refer to the specific verification process for the verification process 4 Structure and module of Application AC300 menu list The first level The second level The third level The fourth level menu menu menu menu Fingerprint registration PONSE Includes ID or User registration RF card registration User management AS 8 Original sound REC Photographing deletion of registration recording Device settings System settings Basic settings clock settings Language settings Voice prompts Volume mediation Power supply management Communication settings Keypad tone Checking interface settings Delete all records Delete all registered data Restore the factory settings i Firmware upgrade Faperuseturigs Daylight saving time settings Function key settings Total numbers of managers Password of super manager Sensitivity adjustment Beginning and end of belling time belling time Belling music power off Belling settings dormancy Free time settings Play colorful propaganda Time power off Time dormancy Time starting up locking off key timing state transition machine number RS232 RS485 Baud rate Ethernet network IP address Subnet mask Gateway address Connection password Dynamic IP alloca
26. nto current state and display in initial interface Message notification It is divided into public and private message Set on back stage of System and then upload to the fingerprint machine when start rolling machine you can see the short message to the public about attendance it is all along exist After user input validation fingerprint there will prompt short message for private people so as to reduce the workload of staff and greatly improve work efficiency Send message by aiming at somebody If an employee s birthday is on October 20 you can set up software in the background on October 20 which issues to him a short message Happy birthday to you then upload to the machine after the staff validates the fingerprint authentication on that day this message will be displayed on screen Send message by aiming at many people such as hold company meeting on June 19 you can set up in the background then upload to the machine and the screen shall display about XX Conference Room XX please participate at XX time on that day There are two ways for transmitting information first one is direct transmission by connecting back stage system with fingerprint machine and the other is transmitted from the U disk 41 Host computer and slave 1 introduction of host computer and slave oute Two machines control one lock install one machine in the door hereinafter referred to as the host install the other one out the doo
27. own as Daylight Saving Time it is a system which regulate local time artificially in order to save energy during the implementation of this system the adopted time known as the daylight saving time Generally in summer day comes early so people regulate one hour ahead of time then you can get up and sleep early to reduce amount of lighting and make full use of light resources thereby saving lighting electricity In autumn move clock back Different countries adopt specific regulation about daylight saving time At present nearly 110 countries implement daylight saving time each year 42
28. r hereinafter referred to as slave at the same time 2 machines may control the lock only the host connect with the lock Consequently solve trivial connection problem of using 2 traditional machines on controlling one lock Fingerprint identification complete to verify user permissions in the host computer the computer also keep records slave is fingerprint head or reading module only carry through fingerprint collection card reading and shall need to verify the information then sent it to the host Consequently solve chaos problem of software on managing user information and in and out records of 2 relative machines The host and slave machine also has back capabilities in and out records must be matched otherwise it can not open the door so prevent people who followed by others from entering the door and prevent the security risks 2 work principle of host computer and slave Host computer Carry through fingerprint registration fingerprint authentication user permission settings user permission verification receive fingerprints or card information collected from extension and then validate and bring the results back to the slave Slave Only as a fingerprint read head carry through fingerprint collection read card and send message which need to be verified to the host computer the host can choose whether to display the test results of slave Daylight saving time time zone settings gt Daylight Saving Time also kn
29. rrent menu 1 OK Select ESC Back Tips of simple working method 10 4 1 user management 4 1 1 User Registration 13 ne User user Enroll amp amp Enroll Delete 2 OK Select ESC Back Explanation 1 The intermediate user Refer to the general user namely person who needs to verify identity because of some purpose such as person who opens the door through the device or only those who check on work attendance 2 The administrator Operates all other work in addition to carry out advanced settings registration or delete operation of administrators at the same level can maintain their own data 3 Super administrator can carry out all other operations including the deletion of his own and all other administrators except super 0 administrator After leaving factory Equipment default with a super administrator code as 00000 password is 888888 can enter the menu for all operations Password can be modified but not to be deleted 4 The equipment only register the intermediate user the general manager may exercise any authority of the super administrator 5 The same ID number can register up to 10 different fingerprints fingerprint ID from 0 to start followed by increments it can also be entered manually 6 After entering the registration menu and the real pre registration indicating the default ID the last No automatically add 1 at this point can enter a custom ID 1 65535 5 bit 7 R
30. s Defines unlocking time each day in one week it is the minimum time unit of access control settings The whole system can define up to 50 time sects one day Each time sect defines 7 time sects they are from Monday through Sunday each interval has effective period of time of 24 hours per day Each user can set a maximum of three time sects three sects are or relationship time is effective as long as the verification time 1s able to meet one of three The format of each time interval HH MM HH MM namely accurate to minutes in accordance with the 24 hour system The ending time is smaller than the beginning time 23 57 23 56 that means the prohibition of the whole day The ending time is bigger than the beginning time 00 00 23 59 that means this sect is effective The effective unlocking time for users open all day 00 00 23 59 or the ending time is bigger than the beginning time in this time sect Example 1 the system default time sect 1 for an opening day that means default leaving factory state that is new registered users need to unlock Time sect definition Sunday 00 00 23 59 Monday 00 00 23 59 Tuesday 00 00 23 59 Wednesday 00 00 23 59 Thursday 00 00 23 59 Friday 00 00 23 59 Saturday 00 00 23 59 Example 2 26 Not allowed to enter on Saturdays and Sundays these two days have a rest enter from Monday to Friday at working hours Working hours 08 30 18 00 Settings are as follows Time sect 2 defini
31. sasacsecseeaseaeses 42 1 Introduction 1 1 Compiling intention Instruction for users 2 Start up When to start up display firm LOGO and progress bar collocate LOGO freely enter original interface after start up such as o o 3 The initial interface After device links with power supply the screen shows the first interface we call the initial interface see figure the basic information is as follows Explanation 1 Use larger font to display time 2 Use other smaller font to display date week and other information 3 The current status display such as sign in sign off 4 Or message information how to display amount of rolling information 5 Play colorful propaganda advertising page circularly Below the initial interface The Icon shows the main hardware configuration including whether or not have camera ID MIFARE Card fingerprint SD card network with power supply mode serial port and so on Help tips column shows the current status or message Friday notification 1 Administrator enter into management mode 1 Press MENU key Equipment prompts administrator Please verify 2 Manager loggings in administrators can use password fingerprint or cards to log on 2 User checking Allow user verify only in authentication mode verification model is carried out in the access control settings such as Press the number keys OK is the serial number If the authe
32. sub portfolio can not open lock but may check on work attendance Note 1 when set combination 245 no permission for setting combination 24 combination 25 combination 45 2 If you want to make all registered users can not unlock set the whole 10 combinations to empty 4 3 5 Lock drive time The lock drive time length means time difference between validated time and starting electric lock that after machine validates fingerprint Take 0 5 seconds for the smallest accurate unit The Largest set is 5s set to 0 means to close lock control function 4 3 6 Time delay of door contact Indicates delay time for inspecting door contact after open the door namely after delay time to inspect door state open or close if there is difference between the door contact state and the set state it gives an alarm This time is the time delay of door contact the unit is s 4 3 7 Door contact switch settings Include three kinds No normally opened type normally closed type No no use of door contact switch Normally opened type if the door is open the lock should be open otherwise it shall appear door contact alarm after passing the delay time Normally closed type ifthe door is closed the lock should be same otherwise it shall appear door contact alarm after passing the delay time 4 3 8 Duress alarm settings If register duress fingerprint it shall alarm automatically after passes this fingerprint in order to preve
33. t machine has 3 permission levels User indicates those who need to establish identity because of some purpose such as open the door though the device or record their in and out records Administrator Implements all other operation except carrying through advanced settings and register users that they have power more than administrator include administrator Super administrator User that can visit all system functions and alter all settings of the system Explanation registrar can register administrator and super administrator if having no registration of super administrator at the same time 1f there is no super administrator the administrator may register super administrator 1f have super administrator the junior administrator can not register senior administrator Mode key When using fingerprint different event corresponds to different state such as work sign in off sign in overtime sign in out back etc states according to clock in conditions It also can be divided into go in go off states according to in and out condition of door contact machine Some key board has 4 function key F or direction key they all can be as state key to set current status But these modes are manual when you need to use some status you should press corresponding button In order to reduce manual operation you may set transferring function timing status when arrive at some set time the machine shall transfer i
34. tion Back stage address Access Control Recording settings Automatic detection Time sect settings Grouping function settings User access control settings basic settings of unlocking combination lock drive time Time delay of door contact Door contact switch settings duress alarm settings Wrong press of alarm back function settings Management recording alarm alarm Checking recording alarm alarm repeat affirmed time Run all testing Memory testing LCD function testing Sound testing Fingerprint Collector testing Keyboard testing Real time clock Combination mode of groups Validation mode of groups Time group Validation mode of time group Other validation modes duress fingerprint management Password inspection alarm Key press help Alarm delay settings U disk management Alarm reset System information Query and pivot Binding ID Download checking records Download management records Download user information Upload user message Upload message notification Upload mp3 registered user number registered fingerprint number Checking record number Management record number Used memory Residual capacity Device Information Checking recording User registered number Fingerprint registered number Checking record number Management record number Residual memory Fingerprint capacity Recording capacity Management recording capacity Memory capac
35. tion A Sunday 23 57 23 56 Monday 08 30 18 00 Tuesday 08 30 18 00 Wednesday 08 30 18 00 Thursday 08 30 18 00 Friday 08 30 18 00 Saturday 23 57 23 56 4 3 2 Grouping function settings Grouping function settings can divide users into several parts and different groups can be combined into different unlocking combinations in order to facilitate the grouping management of access control Such groups can be combined as lots of unlocking combinations System defines 5 groups group 1 group 2 group 3 group 4 group 5 New registered users belong to group 1 by default but these users also can be re assigned to all other groups Group time sect settings Set group unlocking time choose the completed setting number in group time sect Default to use time sect of group 1 for new registered user but when user resets affiliated group the user uses corresponding group time sect so firstly it needs to define the default time sect of each group Note 1System default group 1 Time sect choose to define number 1 default unlocking for new registered user The default time sect of group 2 has time sect may set three time sects at most the relationship among them is or Example group 2 settings of default time sect group2 efficient in time sect 1 8 40 and the group validation mode is fingerprint it also may choose other defined time sect Group2 default time sect 01 08 40 fingerprint Group validation mode settings
36. utton yes failure to shutdown button No effective to shutdown button Time state transition State transitions when use roll machine it require to keep a record of roll status in different time after this setting when arrive time that user set the machine will automatically convert to the status of rolling Display the current rolling state in the current rolling interface At least include sign in sign off overtime sign in overtime sign off etc four states and at least six time sects 4 2 4 Communication settings Machine number Number that the machine in the LAN range from 1 to 255 RS232 Whether or not to use RS232 for communication RS485 Whether or not to use RS485 for communication 23 Baud rate Default 9600 set up five options 9600 19200 38400 57600 115200 Ethernet network Whether or not to open Ethernet communication if choose Yes you should also set the following parameters IP address Default IP is 192 168 1 201 adjust in accordance with demands Subnet mask Default subnet mask is 255 255 255 0 adjust in accordance with demands Gateway address Default gateway address is 192 168 1 1 adjust in accordance with demands As the default communication mode whether or not to use TCP IP protocols for communications Connection password The system default password is 0 that is no password you can set if set password when connect you have to offer a password The number of
37. y only removal of one character or Chinese character that is Backspace key Backspace it may delete all after a long press 5 In any state of non menu F1 key is help key it can display the help explanation of this state Any key may return Input Method Editor Press MENU key to start Input Method Editor in relation to input then press MENU key to switch input methods including Pinyin lowercase letters uppercase letters digital clock input format F4 may back at this time It may delete all after a long press T9 Bopomofo Appear this chart after pressing figure key 6 and 8 Here select Bopomofo combinations by pressing left mu nv nu ou and right direction keys Example use gt to select ou Use Up and down arrow keys to flip Chinese mu nv nu ou characters directly select the appropriate Chinese ER characters by giving long press of figure keys example give long press of key 1 to choose ou 223456789 WK fh A ES MK Ke K Ki i Bopomofo combinations disappear start ER up Lianxiang 1 2345 WW P R T ES Give long press of key 2 to select Yang and have a short press of figure key again to input Pinyin Cycle by cycle until satisfied with it If satisfied press OK back to original interface input content to focus of original interface ESC back to original interface and cancel the input content Register dialog box If Re
38. y the time sect of users the time sect of using group is No automatically 2 the relationship between using group validation mode and personal validation mode 1 If the group validation mode is yes the group validation mode is effective the personal validation mode is invalid 2 If the group validation mode is no the user use personal validation mode Example set user 00001 into one group User 00001 Group Time sect of using group Time sect 1 Time sect 2 Time sect 3 Validation mode of using group yes Validation mode FP Use the time sect of group 1 Chere the time number of user shall change into group time number automatically User uses group validation mode in spite of personal authentication mode is which one it depend on the group validation mode 4 3 4 Unlocking combination settings The following two are mutually exclusive you can choose one only none but the basic settings of unlocking combination 1s No the unlocking combination settings shall effective Basic settings of unlocking combination Set the person number of unlocking the fingerprint machine no matter in which group the default setting is 1 indicate that only one user pass the validation it shall emit lock control signal such as the setting is 3 1t indicates three users need to pass then the fingerprint machine shall emit lock control signals and intervals of each one is no more than 30 seconds The maximum setting is no
Download Pdf Manuals
Related Search