User ManUal
Contents
1. Make sure that you type the name of the subject in the Scan tab window When try to use a Scan Card the camera wont read the number properly gt Type the Scan Card number manually into the text field using the digital keyboard CONTINUE gt TIPS amp TRICKS TIPS amp TRICKS The S3 Scanner App says that my Scan Card is invalid gt The Scan Card has probably been used Use a different Scan Card or purchase a digital scan credit using the Scan tab Where does the S3 Scanner App keep my completed scans gt The App stores a list of your completed scans in the Record tab of the App CONTINUE gt TIPS amp TRICKS amp TIPS amp TRICKS SYNC Make sure your iPad mini is connected to a Wi Fi network If an error is displayed saying that the server does not answer please wait 10 minutes and try syncing again If the error comes up again contact your local Scanner Support If the time has expired for sync press the Sync button This will reload scan time DARK CAP The Dark Cap is designed to be a protective cover for the S3 nose Whenever you are not scanning put it on even between each scans CLEANING We all have oils on our skin which after repeated scanning can interfere with the reading of the Scanner Clean the nose and the front of the Scanner periodically To do this first disconnect the S3 from the charging cord Then apply a glass cleaner or a mil2. SCAN WITH S3 es THE SCAN TAB FE SCANTAB A SCAN WITH DIGITAL SCAN CREDITS GQ THESTATUS TAB To purchase credits RESULT SCREEN DEMOGRAPHICS HOW TO DO IT gt Tap the Purchase Scan Credits button A new window will open asking you to log in to your Distributor account Please have your Distributor ID your Nu Skin web log in credentials and a credit card ready Your iPad mini needs to be connected to a Wi Fi network to do the purchase SS a CONTINUE gt SCAN WITH S3 Oe THE SCAN TAB GQ THESTATUS TAB E SCANTAB You can purchase scan credits in units of 1 20 or 100 by tapping on the appropriate icons on the screen RESULT SCREEN DEMOGRAPHICS gt Once you have chosen a final amount of credits tap the Check Out button to purchase them and add them to your S3 Follow the on screen instructions until your purchase is completed gt When you are done you can close the Buy Digital Scan Credits window by tapping the Back icon in the upper right corner of the screen The App will return to the Scan tab window CONTINUE gt THE SCAN TAB THE STATUS TAB SCAN TAB NOTE After you have purchased scan credits you will notice that both the SCAN WITH S3 ad REPOSER EEE Scan tab icon and the Digital Scan icon have changed Both icons now have numbers that show the amount of digital scans you have remaining Keep an e
3. N A 0 CONTINUE gt IMPORTANT TO KNOW A oO OPERATING TEMPERATURE POSITIONING pt CALIBRATION The S3 can be affected by the environmental conditions in which it is stored and operated The Scanner is designed to work in ambient 4 OPERATING TEMPERATURE temperatures between 10 to 40 C The optimal scanning temperature is 20 to 25 C The S3 should not be stored or M TRAVELLING WITHTHE S3 transported in temperatures greater than 40 C or lower than 10 C Leaving the S3 in a car on a warm day or a cold night can affect its performance or damage the device If the Scanner has been stored at a temperature different than the operating conditions described above such as in a car overnight sufficient time must be given for the S3 to acclimate to the operating environment before setup and calibration Please allow enough time usually 30 minutes for the S3 to adjust to the scanning environment before plugging the S3 into a power outlet or attempting to calibrate the device CONTINUE gt IMPORTANT TO KNOW A TRAVELLING WITH THE 3 POSITIONING HAE CALIBRATION Only travel with the S3 in the S3 carrying bag provided with the instrument When the S3 is transported by air it should be brought OPERATING TEMPERATURE along as carry on luggage This minimises the potential for added shock jarring and exposure to extreme temperatures associated with M TRAVELLING WITHTHE S3 checked b
4. BLUETOOTH Press the Home button of your iPad mini to return to the Home Screen Tap the Settings App to access the iPad settings Bluetooth should be turned to the On position The iPad mini will now detect Bluetooth signals Press the Home button again to return to the Home Screen On the back of the S3 Scanner unit to the right of the Main Power button is the Bluetooth button Hold down the Bluetooth button for 2 3 seconds until it begins to blink The blinking blue LED light on the back of the S3 unit indicates that the device is now broadcasting a Bluetooth signal The next time you turn on the power on the Scanner do not press the Bluetooth button again It is no longer necessary for subsequent connections CONTINUE gt SET UP YOUR S3 es CHECKING EQUIPMENT LIST TX J CHARGING DEVICES E ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH POWERING UP YOUR SCANNER AND CONNECTING IT TO YOUR IPAD MINI VIA BLUETOOTH HOW TO DOIT Tap now on the S3 Scanner App Do not start the S3 Scanner App until the Bluetooth button is blinking gt In the Status tab drag down the arrows under the To search for Scanners pull down button The App will now search for S3 Bluetooth signals If your S3 is not listed pull down the arrows again Interference may occasionally prevent initial detection Detected S3 devices will be listed on
5. TRICKS The S3 Scanner App does not load when tap on it in the Home Screen gt Press and hold the S3 Scanner App icon on the Home Screen Uninstall the App and then reinstall it by following the instructions in this manual This step should only be taken as a last resort as it will delete any unused digital scan credits you have purchased and will erase any un synced scan results The S3 Scanner unit wont turn on gt Make sure you have charged the Scanner unit for at least 8 hours before you try to turn it on gt Plug the S3 into a wall socket using the supplied power cord The rear power LED light green should illuminate to show the device is being charged The main display on the top of the S3 should also show a charging symbol Press and hold the Power button for 5 full seconds Release the button and press the Power button again CONTINUE TIPS amp TRICKS amp TIPS amp TRICKS The S3 Scanner App wont let me perform a scan gt There are several reasons why this might be happening The Scanner might not be linked to the iPad mini via Bluetooth Make sure the iPad mini and the Scanner are in range of each other within 30 m You may need to perform a Dark Cap Scan or an Operator Scan Check the status tab for this Make sure you sync the Scanner at least once per month Check that you have either purchased a digital scan credit or you have input a Scan Card
6. iPad mini The S3 will not sync with or perform software functions if it is connected to an unapproved device CONTINUE gt SAFETY INFORMATION y SERVICING as HANDLING g ELECTRICAL WARNINGS Servicing of the S3 is not to be performed by the user or any unapproved third party The S3 should never be opened or A GENERAL WARNINGS disassembled If the S3 enclosure ever becomes cracked or broken do a not attempt to access the internal components or electric circuitry This Ga SERVICING could cause exposure to the circuitry and risk of fire or electric shock To avoid any risk of shock disconnect the unit from any power source immediately if applicable and then return the S3 to Pharmanex for servicing NOTE The S3 warranty is void if the enclosure has been tampered with in any way if any part of the enclosure is deliberately removed or if there is evidence of attempts to remove the enclosure Not only will these actions void the warranty but the Scanner Lease Holder will be held responsible for the full cost of the S3 CONTINUE gt SAFETY INFORMATION y us HANDLING 5 ELECTRICAL WARNINGS A Q GENERAL WARNINGS SERVICING SERVICING Conditions Requiring Service If any of the following conditions occur unplug the S3 from the wall outlet if applicable and call your local Scanner Support e The power supply cord or plug is damaged e Liquid has been
7. in the Person Being Scanned field Then the subject is requested to PLEASE PLACE HAND ON SCANNER When his her hand is put on the S3 nose the scan session begins automatically via 3 different steps Sensing Initialising Scanning CONTINUE gt SCAN WITH S3 Oe a THE STATUS TAB SCAN TAB RESULT SCREEN DEMOGRAPHICS THE SCAN TAB G ABOUT HAND PLACEMENT Show how the hand should be placed for a proper scan gt x To cancel the scan session and return to the Scan tab window CANCEL The scan takes around 30 seconds The hand should remain on the probe until the S3 Scanner App and the Scanner display screen both release the score CONTINUE SCAN WITH S3 THE SCAN TAB a THE STATUS TAB SCAN TAB The scan is now finished The scan screen will now offer you 2 options RESULT SCREEN DEMOGRAPHICS e To email the scan results to the clients by inputting their email address The email is created and sent by Nu Skin Enterprises but the client will have the possibility to answer you directly e To enter demographic information on the bottom bar to allow you to better understand the persons overall profile WHAT DOES MY SCORE MEAN z 000 g 09 DIETARY HABITS x MODERATE CONSUMPTION OF FRUITS AND VEGETABLES t SUPPLEMENTATION REGULAR SUPPLEMENTATION FACTORS THAT AFFECT SCORE THESE ARE GENERAL PARAMETERS B
8. the left of the Status window CONTINUE gt SET UP YOUR S3 es CHECKING EQUIPMENT LIST CHARGING DEVICES ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD INSTALLING THE S3 APP dt j g CONNECTING VIA BLUETOOTH POWERING UP YOUR SCANNER AND CONNECTING IT TO YOUR IPAD MINI VIA BLUETOOTH HOW TO DOIT PLEASE CONNECT TO A SCANNER TO CONTINUE TO SEARCH FOR SCANNERS PULL DOWN gt Tap on your S3 s CS number A window will ask if you would like to connect with the Scanner gt Click Yes Devices will be linked CONTINUE gt SET UP YOUR S3 ee CHECKING EQUIPMENT LIST TX J CHARGING DEVICES E ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH POWERING UP YOUR SCANNER AND CONNECTING IT TO YOUR IPAD MINI VIA BLUETOOTH HOW TO DOIT Once a S3 and the iPad mini are linked they will automatically try to detect and communicate with each other when activated until you choose to Disconnect them in the Status tab window IMPORTANT Only one S3 can be linked to an iPad mini at a time CONTINUE gt SET UP YOUR S3 ee POWERING UP YOUR SCANNER AND CONNECTING IT TO YOUR IPAD MINI VIA BLUETOOTH Ee CHECKING EQUIPMENT LIST TX J CHARGING DEVICES E ACTIVATING YOUR IPAD MINI Bluetooth is different from Wi Fi Wi Fi allows a device to access the _ CONNECTIN
9. 3 16 1 07 A HOURS REMAINING CONTINUE gt SCAN WITH S3 Oe a THE STATUS TAB f SCAN TAB 9 RESULT SCREEN DEMOGRAPHICS THE STATUS TAB AND 3 CALIBRATION The next step is to perform a Dark Cap Scan Make sure that the Dark Cap is on the S3 nose and press the Dark Scan icon Follow the instructions on the screen until the Dark Cap is complete You will need to perform a Dark Cap Scan once every 24 hours Then remove the Dark Cap and perform an Operator Scan by tapping on the Operator Scan icon You will need to do an Operator Scan once every 14 days These calibration scans are used as a quality assurance tool to track Scanner consistency Make sure you make them accordingly CONTINUE SCAN WITH S3 Oe THE SCAN TAB GQ THESTATUS TAB SCANTAB WARNING To start scanning a subject you first need to get his express consent eee We reat een that he agrees to share his personal data such as his name and demographic information To do this please have your subject sign the Schedule B of your S3 Agreement and keep the copy of it for you Nu Skin will operate regular audits to make sure you collect these forms To scan a person you must either purchase digital scan credits or use a Scan Gard DIGITAL SCAN CREDITS DIGITAL SCAN USE A DIGITAL SCAN CREDIT TO PERFORM A SCAN SCAN CARD USE A PHYSICAL SCAN CARD TO PERFORM A SCAN CONTINUE gt
10. A M NU SKIN j Soe gee SS PHARMANEX BIOPHOTONIC SCANNER y LZ NSIN we Rete Gere USER MANUAL Ge SET UP YOUR S3 SCAN WITH S3 SAFETY INFORMATION Y z O Z Y O H zZ lt O O AT A GLANCE CONTENTS AT A GLANCE O BLUETOOTH DARK CAP Es ONJOFF SWITCH S3 NOSE LED LIGHT ee r CONTINUE gt SAFETY INFORMATION HANDLING ELECTRICAL WARNINGS GENERAL WARNINGS SERVICING WARNING Failure to follow these safety instructions could result in fire electric shock or other injuries or damage to the S3 iPad mini or other property Before using the S3 read the entire manual and all safety instructions to ensure safe and proper use HANDLING This Scanner is a highly sensitive scientific measurement instrument Always handle it with care CONTINUE gt SAFETY INFORMATION y ELECTRICAL WARNINGS g ELECTRICAL WARNINGS A WATER amp MOISTURE ae HANDLING To reduce the risk of fire from electric shock do not expose the S3 to A GENERAL WARNINGS rain or moisture 9 SERVICING Do not use the S3 near water sources such as bathtubs wash bowls sinks laundry machines in wet basements swimming pools or other receptacles for liquids If liquids are spilled on or near the S3 while it is connected to its power cord then unplug the device from the electrical outlet immediately an
11. ASED ON OVER 1 000 000 SCANS YOUR INDIVIDUAL SCS MAY VARY DIETARY HABITS SUPPLEMENTATION AND LIFESTYLE CHOICES REPRESENT POSSIBLE SCORE OUTCOMES AND DONOT REFLECT GUARANTEED SCORE INDIVIGUAL GENETIC DIFFEREF CAN STL INFLUENCE THE RATE OF ANTIOXIDANT ADSORPTION AND THEREFORE YOUR PERSONAL SKIN CAROTENOID SCORE lil DEMOGRAPHICS i BIRTHDATE GENDER HEIGHT WEIGHT LIFEPAK INTAKE CONTINUE gt 4 SCAN WITH S3 Oe a THE STATUS TAB SCAN TAB RESULT SCREEN DEMOGRAPHICS THE SCAN TAB To exit the scan session press Done and you will return to the Scan tab home page where you need to choose either Digital Scan credits or a Scan Card Once you tap the Done button you can no longer look back at the customers score CONTINUE gt SCAN WITH S3 Oe GQ THE STATUS TAB FE SCANTAB EE omoran RESULT SCREEN DEMOGRAPHICS RESULT SCREEN DEMOGRAPHICS Tapping on each icon will activate touch menus which allow you to select the option that best describes a persons profile This information will help Nu Skin record the subjects profile and establish statistical data It is not required to enter demographic data to obtain a scan results and it is only optional However we strongly encourage you to collect as much information on each subject as possible in every scanning session When entering the information please be as careful and ac
12. G YOUR IPAD Internet Bluetooth is a local signal between two devices Your S3 unit RAIN IEE and the iPad mini can communicate even when you do not have a Wi Fi connection as long as Bluetooth is active CONNECTING VIA BLUETOOTH The Bluetooth link between the devices has a maximum range of about 160 feet 50 m Interference from various sources can decrease that range The Status tab of the S3 Scanner App will tell you if you are out of range and disconnected from your S3 Tee A D So as CONTINUE gt SCAN WITH S3 Oe THE STATUS TAB Peer AND 3 CALIBRATION The Status tab is used to view the status of Scanners and perform the RESULT SCREEN DEMOGRAPHICS GQ THESTATUS TAB calibration scans the Dark Cap amp Operator Scans S3 Scanners will be listed as 2 PHARMANEX PLEASE CONNECT TO A SCANNER TO CONTINUE 574729 CS74567 TO SEARCH FOR SCANNERS PULL DOWN 4 3 g e Inrange grey S3 icon HOTE If your Scanner is Locked pop up window appears contact your CONTINUE gt local Scanner Support SCAN WITH S3 en THE STATUS TAB AND 3 CALIBRATION GQ THESTATUS TAB FE SCANTAB GB RESULT SCREEN DEMOGRAPHICS REMINDER Only one S3 unit can be linked to your iPad mini at a time When an S3 is linked to the Scanner App the status tab will show the CS number PHARMANEX a CS74567 DISCONNECT DARK SCAN LAST SCAN
13. INSTALLING THE S3 APP NSDC a z CONNECTING VIA BLUETOOTH v NSEnt az NSguest Other gt CONTINUE gt SET UP YOUR S3 eo CHECKING EQUIPMENT LIST 1 ES CHARGING DEVICES E ACTIVATING YOUR IPAD MINI TA CONNECTING YOUR IPAD INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH CONNECTING YOUR IPAD MINI TOA Wi Fi NETWORK e Once you have selected a Wi Fi network the iPad mini will automatically access the Internet through that signal A Wi Fi icon will be displayed in the upper left corner of the Apple device The more bars the Wi Fi icon shows the stronger the signal The iPad mini will automatically attempt to connect with any Wi Fi network you have successfully used in the past as long as you are within range of that signal The typical range of a Wi Fi network is between 36 to 91 m Interference can reduce Wi Fi signal ranges CONTINUE SET UP YOUR S3 eo CHECKING EQUIPMENT LIST O Es CHARGING DEVICES E ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD L m4 INSTALLING THE Sz APP CONNECTING VIA BLUETOOTH INSTALLING THE S3 SCANNER APP ON THE IPAD MINI REMINDER You will not be able to install the S3 Scanner App on your iPad mini unless your iPad mini is connected to a Wi Fi network On the Home Screen tap on the Safari App Enter in web address www s3ocannerApp com Press the Download button to download the S3
14. OWER DOWN O POWER DOWN YOUR 3 Disconnect first from the S3 Scanner App by going to the Status tab and clicking on the Disconnect button Exit the S3 Scanner App by pressing the iPad home button Shut off the iPad screen by tapping the Power button briefly e Power down the S3 by pressing the Power button on the back Do not press the Bluetooth button when powering down It is no longer necessary Place the Dark Cap on the nose to prevent any damage to the electronics e To disconnect the S3 from the power supply unplug the power adapter from the rear charging plug When the S3 is connected to the power supply keep the power adapter and rear charging plug easily accessible at all times Place the S3 into its carrying case when it is not in use IMPORTANT Do not shut down the S3 while performing a scan or at any time while in use If you are operating the S3 on batteries and the display gives you a low power warning then either connect the S3 to a power outlet using the power supply or shut down the CONTINUE gt device SUPPORT SUPPORT e CONTACT will supply you with the email address of your local Scanner Support and website links where you can obtain support e ABOUT will tell you the S3 Scanner App software version the 3 firmware version and other information about the hardware and software CONTINUE gt TIPS amp TRICKS TIPS amp
15. Removing damaging or altering labels voids all warranties This symbol indicates that the unit should not be disposed of by the consumer It must be sent back to Pharmanex LCC for disposal The S3 is a Class B digital device that complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Restriction of Use of Hazardous Substances compliant Directive 2011 65 EC oN m gt
16. S TAB FE SCANTAB gt Put the Scan Card on a flat surface and hold the iPad in a parallel position above the card RESULT SCREEN DEMOGRAPHICS When the card is centred in the camera the S3 Scanner App will automatically recognise the barcode input the data into the App and return to the Scan tab window ready to perform a scan gt If for any reason the camera is not able to properly record the barcode then tap the Enter Scan Card Manually button in the upper left This will open an input field and the iPad mini digital keyboard gt Type the Scan Card number into the input field using the digital keyboard Tap Return on the digital keyboard when you are finished typing in the Scan Card number PLEASE POSITION THE SCAN CODE IN THE AREA ABOVE OR MANUALLY ENTER THE SCAN CARD NUMBER BELOW 123456789000 a J Dee CANCEL USE THIS NUMBER CONTINUE gt SCAN WITH S3 Oe THE SCAN TAB GQ THESTATUS TAB f SCAN TAB The App will recognise the number and return to the Scan tab window ready to perform a scan If you input the Scan Card number incorrectly the RESULT SCREEN DEMOGRAPHICS S3 Scanner App will give you the message INVALID CODE PLEASE TRY AGAIN If you want to return to the Scan tab window without having scanned or input a Scan Card number then tap Cancel You are now ready to start scanning subjects You must first enter the persons name
17. Scanner App After the S3 Scanner App has been gt gt En successfully installed on the iPad mini the App will have an icon on the Home Screen Tap the S3 Scanner App icon to start the program You can press the Home button at any time to exit the S3 Scanner App CONTINUE gt SET UP YOUR S3 ee CHECKING EQUIPMENT LIST TX J CHARGING DEVICES E ACTIVATING YOUR IPAD MINI o CONNECTING YOUR IPAD INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH POWERING UP YOUR SCANNER AND CONNECTING IT TO YOUR IPAD MINI VIA BLUETOOTH REMINDER The S3 operates using a rechargeable battery Once the battery is charged it can be unplugged from the power supply and used as a stand alone device for a maximum of 6 hours of constant use WARNING Make sure the Dark Cap is covering the S3 nose before turning on the S3 The S3 will not fully activate unless it detects a Dark the unit is powered and ready to link to the iPad mini CONTINUE Cap Once the Dark Cap is secure on the nose press the Power button to activate the S3 The S3 display screen will show that Oe SET UP YOUR S3 o Ea CHECKING EQUIPMENT LIST N Bus CHARGING DEVICES pA DAD MINII 9 AC ATING YOUR IPAD MINI gt CONNECTING YOUR IPAD INSTALLING THE S3 APP ms CONNECTING VIA BLUETOOTH POWERING UP YOUR SCANNER AND CONNECTING IT TO YOUR IPAD MINI VIA
18. aggage Remember that the S3 is an extremely sensitive scientific device and should always be treated as such Ce AS _ N NUE ANY AK AA NN A WN CONTINUE gt SET UP YOUR S3 eo O CHECKING EQUIPMENT LIST Bu CHARGING DEVICES E ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD S3 INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH CHECKING EQUIPMENT LIST Please review the following equipment list to ensure all components are included v S3 Scanner Apple iPad mini placed in its cover v Power supplies amp adapters S3 Scanner carrying bag v S3 Scanner Dark Scan Caps 2 in total 1 placed on the Scanner and one spare placed in the carrying bag May not be provided for your market CONTINUE gt SET UP YOUR S3 Oi eo CHARGING DEVICES O CHECKING EQUIPMENT LIST ES CHARGING DEVICES The Scanner and the iPad mini should be plugged into a grounded electrical outlet and charged using the power supplies included E ACTIVATING YOUR IPAD MINI for at least 8 hours before the first attempt to operate the devices CONNECTING YOUR IPAD gt HOW TO DO IT gt Plug one end of the S3 power cord into the back of the Scanner EN 4 INSTALLING THE S3 APP 5 and plug the other end into a grounded outlet Ue CONNECTING VIA BLUETOOTH The power charging LED light on the back of the Scan
19. curate as possible It is crucial to any meaningful statistics BIRTHDATE Aug 24 1979 CONTINUE gt SYNC YOUR S3 2 SYNC YOUR S32 The S3 Scanner App will keep a digital copy of all your completed scans in i the Records tab Tap on the Records tab to open up the Records window You will see a list of the scans you have completed in chronological order by RECORDS dateand time most recent scan first You will notice that the completed scan results may have the words Pending or Recorded These words tell you whether the record has been synced with the Nu Skin server or not A synced record will show as Recorded while a record with a Pending status means that the record has not been synced yet In order to sync your completed scan records to the Nu Skin server you will need to be connected to a Wi Fi network CONTINUE gt SYNC YOUR 53 T SYNC YOUR 3 N iz IMPORTANT You must sync the S3 Scanner App to the Nu Skin server at least RECORDS once a month and not later than the last day of the month Not doingthis yourscanswillnotcountforyourmonthly Scanner Maintenance Free Programme Personal Sales Volume PSV and commissions We recommend that you sync after each of your scan sessions To sync your scan records press the button SYNC The Operator tab Use this tab to change session and select the market and language you want CONTINUE gt P
20. d contact your local Scanner Support If the S3 is not plugged in but is operating on battery power then do not approach the device but contact your local Scanner Support B SERVICING Do not remove the display cover or bottom of the S3 or attempt to repair the device yourself Disassembling the device may damage it Or may cause injury to you There are no user serviceable parts inside Servicing should only be performed by a qualified technician at Pharmanex CONTINUE gt SAFETY INFORMATION y O HANDLING 4 ELECTRICAL WARNINGS GENERAL WARNINGS roy SERVICING ELECTRICAL WARNINGS C POWER CORDS amp POWER SUPPLIES Do not plug any other power cord or power supply into the S3 except the ones that are provided with this unit Do not overload wall outlets or extension cords A grounding type power plug will fit only into a grounding type receptacle outlet with matching openings If you need an extension cord use only the grounding type D COOLING The S3 should never be placed near or over a radiator heat register or any other heat source Avoid leaving the device in an overly hot or cold environment for prolonged periods of time The optimal storage temperature range for the device is between 10 C to 40 C CONTINUE gt SAFETY INFORMATION y GENERAL WARNINGS ELECTRICAL WARNINGS EYE SAFETY The Scanner utilises LEDs Light Emitting Diodes as a source of
21. d soap and water solution to a microfiber cloth and wipe down the device Do not submerge the S3 in water or rinse water to clean Do not use harsh chemical solvents or abrasive cleaners In addition we recommend your subjects use the Nu Skin Epoch Hand Purifier prior scanning to help reduce the amount of oil being deposited on the S3 and the potential transfer of germs from one person to another CONTINUE gt TIPS amp TRICKS g TIPS amp TRICKS VARIABILITY Variability is common because the Scanner measures carotenoids which are found at trace levels and in a biological tissue Two types of factors influence the Skin Carotenoid Score 1 Personal genetics diet dietary lifestyle 2 Operational calibration temperature hand placement drafty conditions 85 of all measurements will be one colour shade from the mean To ensure your Scanner scans accurately Place the hand of the subject at the exact same location as you did for their previous scan e Check that the Scanner has been well calibrated via the Dark Cap Scan and the Operator Scan Scan your subjects in a room where there is an ambient temperature of 20 to 25 C CONTINUE gt TIPS amp TRICKS amp TIPS amp TRICKS BLUETOOTH Maintaining your Bluetooth connection tips 1 Do not shut off the Scanner while the S3 Scanner App is still running 2 Do not press the Bluetooth button on the back of the Scanner once you ha
22. ing gt Open the S3 Scanner App gt Attempt to connect to the Scanner CONTINUE gt TECHNICAL SPEC TECHNICAL SPECIFICATIONS e Voltage or Voltage Range only with this power supply type DOC EMSA 200 200 Input 100 240 V 50 60 Hz 1 0 A Output 20 V 50 60 Hz 2 0 A Statement of Range of Environmental Conditions Indoor use up to 2000 m Safe Operating Temperature 10 to 40 C Optimal Operating Temperature 20 to 25 C Safe Storage temperature 10 to 40 C Relative Humidity 18 85 Mains supply voltage 10 to 10 e EMC 61326 1 2013 EN 61000 3 3 2008 EN 61000 3 2 2006 e Safety 61010 1 2010 e Weight 1 46 kg e Height 16 8 cm Width 23 5 cm e Depth 11 6 cm Name and Address of the EU Representative Nu Skin Belgium NV Leonardo Da Vincilaan 9 1935 Zaventem Belgium m To contact your local Scanner Support please consult the S3 App section Support gt Contact CONTINUE TECHNICAL SPEC TECHNICAL SPECIFICATIONS CE marking on a product is a manufacturers declaration that the product conforms with the requirements of the European Council Directives 2006 95 EC 2004 108 EC and 1999 5 EC Thissymboldesignatesthatthis unitislistedby Underwriters Laboratories This symbol designates that this unit is listed by the Canadian Standards Association No user serviceable parts inside All components are custom made and must not be altered in any way
23. light LEDs are found in household lighting electronics and common as HANDLING GENERAL WARNINGS flashlights While th t lly thought of as harmful to th 9 SERVICING as IG S W 11e ey are no genera y oug OT as NarmrTul TO e eye it is strongly recommended to not stare directly into this or any bright source at close range or for prolonged periods of time B SENSITIVE OPTICAL COMPONENTS The optical components of the S3 can be damaged if exposed to excessively bright light Do not scan shiny mirror like or metallic objects that reflect light back into the 3 Do not scan any extremely bright objects of any kind Do not point the S3 at bright room lights or the sun Cover the Scanner nose with the S3 Dark Cap when the device is going to be located in a high brightness area and any time the device is not in use Not following these recommendations can damage the sensitive optical components inside the S3 CONTINUE gt m SAFETY INFORMATION y GENERAL WARNINGS ELECTRICAL WARNINGS C USAGE LIMITATIONS as HANDLING This unit must not be used or operated in any manner other than GENERAL WARNINGS that specified by Pharmanex Failure to operate the unit under these diti impair the safety feat ided by the unit 9 SERVICING CONAITIONS May Impalr e safe y eatures Drovl e e unl D CONNECTED DEVICE The S3 has been configured to work only with approved Apple devices currently the
24. ner will illuminate green showing that the S3 is charging gt Plug the iPad mini USB cord into the USB electrical adapter gt Plug one end of the iPad mini power cord into the base of the iPad mini and plug the other end into an electrical outlet Once both the S3 and iPad mini are charged you can unplug them 1 fj f if from their power supplies WII Ji M MY i NIY YH y 111 MI CONTINUE gt SET UP YOUR S3 o CHECKING EQUIPMENT LIST CHARGING DEVICES ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH ACTIVATING YOUR IPAD MINI Press the Power button on the top right bezel of the unit Slide the unlock bar on the screen to the right to enter the Home Screen POWER BUTTON CONTINUE gt SET UP YOUR S3 eo CHECKING EQUIPMENT LIST QO ES CHARGING DEVICES E ACTIVATING YOUR IPAD MINI SF CONNECTING YOUR IPAD INSTALLING THE S3 APP CONNECTING VIA BLUETOOTH CONNECTING YOUR IPAD MINI TO A Wi Fi NETWORK Wi Fi is needed to e Access the Internet e Install the S3 Scanner App The S3 Scanner App must be installed on your iPad mini in order to use the S3 Scanner unit Sync your scan records to the Nu Skin server e Purchase digital scan credits e Email the scan results to your clients Nu Skin Enterprises does not supply wi
25. reless networks and does not provide support for private or public Wi Fi networks You must connect to your own Wi Fi network or access a public network and obtain their appropriate security credentials CONTINUE gt SET UP YOUR S3 eo CHECKING EQUIPMENT LIST CHARGING DEVICES E ACTIVATING YOUR IPAD MINI CONNECTING YOUR IPAD INSTALLING THE S3 APP Ue CONNECTING VIA BLUETOOTH CONNECTING YOUR IPAD MINI TOA Wi Fi NETWORK e Activating the iPad mini will automatically display what is called the Home Screen You can always return to the Home Screen by pushing the Home button at the bottom centre of the device e The Home Screen is filled with small icons When you tap on the touch screen these icons will activate computer programs called Apps Find the Settings App on the Home Screen e On the left side of the Settings App window locate the Wi Fi option in the upper left of the screen Tap on Wi Fi in order to configure your wireless network options e Make sure that the Wi Fi option is set to the ON position CONTINUE SET UP YOUR S3 on E cos CONNECTING YOUR IPAD MINI TO A Wi Fi NETWORK e A list of available Wi Fi networks will be shown below Tap on the network you want to join and enter any required security credentials TX J CHARGING DEVICES E ACTIVATING YOUR IPAD MINI gt CONNECTING YOUR IPAD Example SA
26. spilled on or objects have fallen on or into the product e The product is damp or wet from condensation or exposure to rain or water e The product does not operate normally when following the operation instructions e The product has been dropped or the cover has been damaged e The product exhibits a distinct change in performance such as the inability to perform basic functions e The S3 Scanner App instructs you to call technical support CONTINUE IMPORTANT TO KNOW A gt POSITIONING ft CALIBRATION OPERATING TEMPERATURE HJ TRAVELLING WITH THE Ss POSITIONING The Pharmanex BioPhotonic Scanner S3 is an instrument that measures carotenoid levels in the skin It is not intended to be used for medical purposes It is not a medical device or a medical diagnostic tool of any kind and is not intended to diagnose treat mitigate cure or prevent any disease or condition or affect the structure or function of any part of the body CONTINUE gt HAE IMPORTANT TO KNOW A CALIBRATION CALIBRATION All precision scientific instruments require calibration Most are calibrated daily and some are calibrated before each measurement The first time you use it the S3 requires a Dark Cap Scan and an Operator Scan After this first calibration is done you will need to do a Dark Cap Scan once every 24 hours and an Operator Scan once every 14 days OPERATOR SCAN REQUIRED N A
27. ve connected This will reset the Bluetooth connection and can sometimes cause signal interruptions CONTINUE gt tesa tricks TIPS amp TRICKS BLUETOOTH If you cannot establish a Bluetooth connection then first try the Bluetooth REFRESH FIX 1 Press the Bluetooth button on the back of the Scanner for 5 seconds until it is blinking 2 Exit the App as normal 3 Reload the S3 Scanner App check the status tab to see if your device has successfully reconnected to the iPad 4 f the two devices do not connect then exit the App and tap on the SETTINGS icon 5 Shut the Bluetooth switch to OFF Wait for 2 3 seconds Then set the Bluetooth switch back to ON 6 Load the S3 Scanner App again and see if the connection is successfully re established 7 If this process does not work follow the POWER refresh steps on the next page CONTINUE gt TIPS amp TRICKS amp TIPS amp TRICKS POWER REFRESH FIX gt Shut down the S3 App gt Shut off the S3 Scanner by holding the power button for 3 seconds gt Power down the iPad by holding the power button down for 5 seconds and swipe the red arrow when it appears gt Power the iPad back on gt Locate the settings icon and tap it gt Tap on Bluetooth and disable it gt Wait for three seconds and activate the Bluetooth again gt Power the S3 Scanner back on gt Hold the Bluetooth button down for 5 seconds until it is blink
28. ye on this number to keep track of when to purchase more scan credits To scan digital If you have scan credits available tapping on the Digital Scan button will automatically begin to guide you through the scanning process CONTINUE gt es NS NY NN NN NN WY SCAN WITH S3 Oe THE SCAN TAB FE SCANTAB B SCAN WITH A SCAN CARD HOW TO DO IT GQ THESTATUS TAB GB RESULT SCREEN DEMOGRAPHICS gt Tapping the Scan Card button allows you to either scan a Scan Card with the iPad minis camera or input the Scan Card number using the digital keyboard Once the Scan Card information is entered the S3 Scanner App will begin to guide you through the scanning process PLEASE POSITION THE SCAN CODE IN THE AREA ABOVE OR MANUALLY ENTER THE SCAN CARD NUMBER BELOW 5480302126263900 USE THIS NUMBER CONTINUE gt SCAN WITH S3 Le THE SCAN TAB GQ THESTATUS TAB ce SCAN TAB gt The camera lens is located in the upper left corner of the back plate of the iPad mini just beneath the main power button RESULT SCREEN DEMOGRAPHICS IMPORTANT Be sure that you are not obscuring the camera lens when trying to scan a cards barcode When imaging it is best to hold the iPad mini with your hands on both the bottom left and right corners with the Home button on the right side CONTINUE gt SCAN WITH S3 Oe THE SCAN TAB GQ THESTATU
Download Pdf Manuals
Related Search