Exercise Handle Bar for The Fitness Trampoline (INS-P-11694
Contents
1. and fit leg sockets over stud on trampoline frame Notch in leg socket lines up with pin on stud All leg hardware fits inside of leg socket in the order shown in Step 1 Securely tighten Allen bolts with supplied 6mm Allen wrench Be sure the Fitness Trampoline logo is centered between the 2 handle legs When all legs are installed turn your rebounder over Copyright 2003 2011 by JumpSport Inc All rights reserved P N INS P 11694 02C Top handle HAN A 20164 00 Avoid Injury Exercise handle bar when Small thumb screws v SCR P 11706A attached to the rebounder is not designed to support your entire weight It is to aid with balance and provide Right side Left side exercise versatility handje handle HAN P 20169 00 HAN P 20170 00 lt i 2 Connect side handles to top handle and secure with small thumb screws to create a top assembly Large thumb SCrews SCR P 11707A 3 Lower top assembly into handle legs You may have to rotate entire top assembly 180 degrees for holes to line up Adjust height as necessary before securing with large thumb screws A KZ TNN Your exercise handle bar men is now installed To remove the handle follow the installation instructions in reverse order Limited Warranty This warranty covers any defects in materials or workmanship for one 1 year from the original date of purchase This wa2. Installation Instructions for Exercise Handle Bar JumpSport Customer Service phone 408 213 2551 Handle legs LEG A 20167 00 6mm Allen wrench TOO P 20334 00 6mm Hex drill bit not shown TOO P 20320 00 Leg socket B ial i Note Leg hardware may be inside of leg socket and covered i Lock washer by the leg plug WAS P 11685A l ull Allen bolt SCR P 11684 01 Leg cap Leg bushing CAP P 11678A BUS P 11683A may not be pre installed Leg plug PLU P 11682A 1 Familiarize yourself with the leg pieces leg and leg cap leg hardware leg bushing lock washer Allen bolt and leg plug and the Allen wrench drill bit IMPORTANT Be sure leg caps are installed securely over bottom of legs as shown above Notch in leg socket i7 WARNING If you have handle I legs attached do NOT attempt to I use the rebounder without the rest lof the handle pieces properly l installed first P EA E E E E ae WARNING Periodically check all l Note Keep Allen wrench to remove I leg mounting bolts and retighten or re tighten legs as needed lif necessary All bolts should be I tight prior to using the rebounder I trampoline i l 2 The 2 handle legs will be installed in place of the normal legs at the 2 locations shown above Turn trampoline upside down
3. rranty is limited exclusively to original retail purchaser and does not cover public or commercial use For additional warranty details please visit http www jumpsport com assembly htm and select the current JumpSport Fitness Trampoline User s Manual Pictures are for illustration purposes only and may not match actual product Model HAN S 20321 00
Download Pdf Manuals
Related Search