LC Mini DVB-T HD_USB_englisch
Contents
1. CONNECTING TO MAINS SUPPLY SAFETY FEATURE Only connect the original mains adapter to a well reachable mains supply socket 230V 50Hz only Do not tilt do not use disproportionate power and do not damage the receiver s power socket and its electrical connections when connecting the power cord If the mains adapter should fail to fit contact your supplier FAILURE If the mains adapter or the power socket or its electrical connection is damaged immediately unplug the mains adapter from the mains supply socket Do not try to open or repair the mains adapter or the receiver on your own Service must be carried out only by experts at a proper service centre If replacement parts are required only original components are allowed to use The use of unauthorised components may result in risk of fire and electric shock Cleaning and care Before cleaning unplug the device from the mains adapter For cleaning the casing please use a soft damp cloth Do not use any washing up liquids that affect the casing Do not spray a cleaner towards the receiver PLACEMENT In touch with certain furniture surfaces it may happen that the receiver s feet may rub off You should place the device on a proper underground that is stable and not easily inflammatory Otherwise the receiver may fall and cause serious injury to people and serious damages to the device Do not use this product near water e g bath tube wash bowl Control elements fr2. function DVB subtitling DATA interface for updates and channel list transfer updates available via website Hardware CPU HDMI Video Audio Reception Handling Power requirement Batteries for remote control Surrounding temperature Dimensions Weight 32 bit RISC CPU with Upscaler 1 x SCART with FBAS Y C YUV or RGB support 16 9 signal Audio DAC Optical audio out Volume control 174 862MHz Band Ill IV V 7 or 8 MHz bandwidth switching Remote control rare panel control 12 Volt Standby mode Low Power Standby ON lt 1W Low Power Standby OFF about 4W e 2x1 5V size AAA e 4 5T to 40T e BxHxT 230 x 35 x 140 mm e Ca 580g Subject to change without prior notice Errors in interpretation excepted 31 32 Technical data 595 00133
3. level can be adjusted by pressing lt gt or AW The corresponding scale is displayed on the screen Hint It is not possible to change the volume level while the menu is active The volume control only affects the audio output at the TV VCR and AUDIO ANALOG OUT ports of the receiver By pressing the IX button you can totally switch off the audio output muting For switching on again simply use the same button 10 Operating the receiver Selecting a channel 1 Using the directional up down keys To change the channels stepwise press the buttons A V In order to switch the channels quicker hold these buttons pressed longer 2 Using the numeric keys direct input One or more digit channel numbers can be input by using the numeric buttons 0 9 and pressing OK Not available channel numbers are ignored 3 Using the channel list By pressing the LIST button the last activated channel list or favourite list is displayed Browse the channel list by pressing 4 gt or A V and activate the desired channel by pressing OK When pressing key LIST twice the following menu appears Favourites List Radio List TV List Alphabetic List Favourites List Your personal list of favourite channels Radio List List of stored Radio channels TV List List of stored TV channels Alphabetic List List of stored TV or RADIO channels in alphabetical order Choose the favoured list by pressing A W and activate it by pressing OK In a
4. or inserted incorrectly Insert batteries correctly IR receiver is covered or not reachable by the IR signal Remove barriers between remote control and receiver Timer is activated Deactivate timer Time is displayed Difference between local time Enter menu Receiver setup and wrongfully and GMT is set incorrectly set time difference correctly Timer is activated at the Difference between local time Enter menu Heceiver setup and wrong time and GMT is set incorrectly set time difference correctly No picture Cable is defect or plugged in Check cable and ports Channel change on incorrectly Screen graphic shows No valid signal Channel has changed frequency Perform channel search Incorrect Settings in menu Settings Correct settings or restore the factory default status 30 Technical data Technical data General e 4000 channels On screen video text and VBI video text Fast OSD quick channel change zapping no delay at on screen graphic display big type for better readability concise help for all menus EPG Electronic Programme EPG Channel list editor copy replace delete blockwise operations Channel search automatic channel search identification of encrypted channels manual channel search Further details Display for signal strength and quality Separate audio output settings for SCART and Digital SWAP
5. simply enter OK at line Edit main list a Erase channels Select the channel to be erased with A V and mark it with OK You can select more channels by pressing A W and OK To erase them press the red button b Sort channels Select the channel to be sorted by using A V and mark it with OK You can select further channels by pressing A W and OK max 20 channels can be selected at the same time Use A V to select the position where to insert the marked channels and confirm with the yellow button Channel list Edit favourites list This sub menu allows you to add your favourite channels to the favourites list Therefore please press OK in line Edit favourites list Now two lists are displayed the Main list all stored channels are listed max 4000 the favourites list contains your favourite channels max 4000 Now you can select your favourite channels from the Main list and copy them into the favourites list Select the channels you like to add to the favourites list by using A W and mark them with OK Then press button SWAP to enter the favourites list There use A W to select the position where to insert the channel and press OK With SWAP you return to the main list again Use EXIT to leave the channel list menu By pressing 4 you can store your modifications Yes or keep the previous settings No Confirm your choice by OK In radio mode you can create your own favourites list for radio programmes too 21 Tim
6. specialist dealer Fie Installation Installation In the main menu select the line nstallation using Installation AY and confirm with OK The Installation menu will appear Reception Channel search Use the buttons av to make your selection and Factory reset confirm with OK Installation Reception Move the cursor using AY to the line Reception and confirm with OK Reception Antenna power Here the antenna power can be switched on or off using the X buttons CAUTION The antenna current may be switched on only if the antenna really is an active indoor antenna with signal amplifier and is not already supplied with current through its own mains transformer or similar Otherwise this could cause a short circuit or destroy your antenna The menu for automatic channel search and the search process will be started During the search the window shows Status scanning The newly found TV and radio programmes will be listed Once the search is complete the message Status complete is shown Use EXIT to leave the search menu Installation channel search You can choose between automatic antenna and manual transponder channel search The automatic channel search checks the whole VHF and UHF range for programmes you can receive Automatic channel search In the Installation menu move the cursor using the buttons AW onto the line Channel search and press the OK button The following menu will appear Chann
7. the Device Lock OK button Change PIN Parental lock device lock To activate or deactivate the device lock move the cursor to the line Device lock and press OK The following menu will appear Use the lt b buttons to switch the device lock on or of When the lock is activated the PIN code must be entered when switching on the receiver Press EXIT to leave the menu Use the lt P buttons to choose whether you want to store the changes made Yes or keep the previous settings No Confirm your choice with the OK button Parental Lock changing the PIN To change the PIN code move the cursor to the line Change Pin Change PIN and press OK The following menu will appear New PIN Confirm PIN The PIN code is set at the factory to 0000 Using the code 9976 the receiver can always be switched on regardless of what PIN code has been set Use the A V buttons to move the cursor to the line New PIN and press the OK button Use the 0 9 buttons to enter a 4 digit PIN code the press OK Use the W button to move the cursor to the line Confirm PIN and press the OK button Now confirm your entry by entering your chosen PIN code one more time then press OK Press Exit to leave the menu Use the 4 buttons to choose whether you want to store the changes made Yes or keep the previous settings No Confirm your choice with the OK button WARNING You must not forget the PIN code Should this happen please contact your
8. the mass storage device Formatting the mass storage device will completely delete all data which is recorded on it Afterwards the full recording capacity will again be available In the menu Mass Storage Device move the cursor using the buttons A V onto the line Formatting and then press the OK button Recordings 4 of 999 Available space 69699MB EN 5 h h A format No Use lt gt to choose whether you want to format the mass storage device yes or not no After formatting the number of recordings will be reset to zero Available space shows the maximum recording capacity available on the mass storage device Use EXIT to leave the window Caution If you format the mass storage device all recordings on it will be irretrievably lost 24 List of recordings List of recordings In normal operation press the Archive button to open up the list of recordings Deleting recordings You can delete recordings you no longer need from the mass storage device Use A V to select the recording you wish to delete Then press the red button A security question asking whether you really want to delete the recording will appear Use the lt P buttons to select whether you really want to delete the recording Yes or not No Confirm your choice with the OK button Record list 21 06 2010 18 30 Sports Sports 01 30 54 Newsflash 00 28 10 Rainman 02 10 20 Soccer 00 45 00 Sorting recordings In normal operat
9. Search mode Manually Encrypted No Channel 7 191 5MHz This is how to perform a manual channel search Select the line Antenna using A W and Terrestrial using the lt or gt buttons Select the line Search mode using A W and Transponder using the 4 or gt buttons In the line Encrypted select whether the channel search should also include encrypted channels using the lt or gt buttons No encrypted channels will be ignored Yes encrypted channels will be included in the search In the line Frequency use the 4 gt buttons to select the channel that should be searched Move the cursor onto the line Start channel search using the A W buttons and start the search process by pressing the OK button Now two windows are shown listing the newly found TV and radio programmes The Status window shows how far the search has progressed Display Scanning gt Search is active Display Complete Search is finished You can leave this menu by pressing EXIT If not finished the channel search algorithm is aborted If new channels are found you are asked to store them Yes Select your choice by lt P gt and confirm with OK If selected YES the new channels are stored at the end of the channel list now 19 Installation Factory reset This menu item allows you to reset the receiver to its default factory status Afterwards the receiver starts up with the Welcome Screen initial installation again Installatio
10. User manual Digital HDTV DVB T Receiver ENGLISH Inhalt Inhalt 2 1 150621 con eet ioco E ten i ake ened iA As 1 Iriialt 2 25 2 0305 2 2 23 2 0 02 2 2222022022202 2022220202002 22 2702020 E A a SET LC TO EE Fo ERA SUDO VG 2 General irnistructions 5 2 2 e ee eet ee E Rae Nee adde P rund 3 Safety InStructions egere ue ee RE EM ERREUR seat ERR E ERE HD SERO PER ERE Re Pea eie RET 4 Cleaning and care Control elements front and rear panel Connecting the receiver eene enne nnne nennen nnne nnne enne nennen enne Remote conttol Me 7 Initial Installation m aNeES 8 Operating the TecelVer ico tp ret E EO pr e Hte o e e Y HEEL RN ies 10 Settings cn ep ero en eeepc ERU eee 12 Settings Receiver setup essere nennen nennen eene nnne 13 Settings PICture ERE 14 Settings SOUN i oet itte Hr edet il ts heated dea 15 SEINGS SUBIT oreet tre re Eo rre PEE ERE USER ee reb Eee ERE A ERE rR RE EBD ta 15 Settings OSD Configuration Option essen 16 Settings Parental lock 17 Parental lock device lock 17 Parental Lock changing the PIN cesccssseeeeeeececeneeseeeeseeeseaeeseeeeaeeseneseaeesneeesneeseaeeeaes 17 IFISTAN ATION s s teet talk cag tpa ene rhetor eer AE ARENE aaier ane iari AANE a Teaia e 18 Installation Receptor isis tirs ritiene dat tiet c Pene sab get ate 18 Install
11. amming Guide EPG 1 Displays Programm Info 4 Volume control In Menu Change parameters or scroll lists AV Channel UP DOWN In Menu selects menu lines Leave current menu or OSD On Screen Display MENU Activates main menu cH Channel UP DOWN TEXT Turns on Videotext A oO N eo EPG 0 LIST MODE s TVIR 1 n LIVE OK gi 3 MENU 0 0 CH voL Q F2 e gt ARCHIVE lt q HT I gt 090 0 C If external mass storage devices are connected 4 Fast rewind gt Playback button ON OFF button LIST Shows list of stations TVR LIVE Switches between RADIO and TV mode OK In menu opens confirms or modifies currently selected item Activates last selected channel option Choice of audio channels F1 F2 Opens specified menus voL Volume control GELB Opens the information menu v In menu Delete function MODE No function Pause button gt gt Fast forward e Opens list of ancuve Fecordings Record button Transfers EPG date into record timer Wi Stop button Setting and managing of markers ono Renaming records Initial installation Initial installation After reading the safety instructions see chapter safety instructions and finishing the a
12. annel you want to use and press the OK button Pressing the EXIT button to hide the menu again Fast forward and rewind During playback press the Fast Forward button or the Fast Rewind button The symbol Por lt lt will appear and the recording will be played faster in the desired direction Press the Fast Forward or Fast Rewind button again to increase the speed The symbols gt PP or lt lt lt wil appear Press the Fast Forward or Fast Rewind button once more and the speed will be increased to the maximum The symbols gt gt gt or lt lt lt 4 will appear Once you have found the spot you were searching for press the Playback button to return to normal playback operation During fast forward or rewind you can use the lt P buttons to change position within the file This enables you easily to jump over longer sections of film Overview of symbols displayed Indication Meaning Playback gt gt Fast forward Very fast forward b Maximum speed forward e Record e Timeshift operation lt lt Fast rewind 444 Very fast rewind 444 Maximum speed rewind 27 Operating the hard disk setting and managing markers During the timeshift function or playback you can mark places on the recording A marker is shown as a coloured triangle in the status indicator Press the button F1 at the playback position to set a marker You can use the butto
13. ation channel search eerie eene entente nennen tanen ntn n senos 18 Manual channel search sesssssssseseeeeeeene nnne enne nennen nnne 19 Installation Factory reset sesssessseeseeeeeeeeeene enne enne nennen nnne nnne 20 Installation Smartcard Reader Option een 20 esI MH 21 Channel list Edit main list Timer record timer n fe gar o aed IDE c Morem NE RE 23 Connection of external mass storage device option seeeennne 24 List ofirecordilgs cin ce tieng PC ate a ea epos 25 Operating the external mass storage device Option seenen 26 2 General instructions Recording 126 Timeshift function irit itor Eee Er iei EE hua ae 26 PAV OAC o D EE 27 Choosing the audio channel for recordings seeeeeennnne 27 Fast forward and rewindi inn c ee Ecc i deii io dee degna 27 Operating the hard disk setting and managing markers seeeee 28 EPG Electronic Programme Guide sese enne 29 Using serial interface 29 Make a contribution to environmental protection 29 Trouble SNOOting EM RR 30 IKE ena UKS MEER EI E ETE T LU LII 31 General instructions Warranty The period of warranty starts when buying the device Please verify the exact date by sales check delivery note invoice etc Keep the documents
14. carefully Our warranty service refers to our warranty terms valid at the time of buying the apparatus In case you require technical service please take or send the device to your specialised dealer CE The unit is labelled with the CE sign and therefore conforms with the general requirements of the European guideline 2004 108 EG concerning electromagnetic compatibility and 2006 95 EG electrical security Dumping hint for packaging Any packaging material is recyclable and should principally be supplied to the recycling process Packaging and wrapping materials as plastic foils etc should never be available for children Safety Instructions Safety Instructions Before installing your digital receiver all security and operating instructions should be read carefully The User s Manual should be retained for future reference All operating and using instructions should be followed Never allow children to operate this electrical device without supervisor ENVIRONMENTAL CONDITIONS Protect the receiver against humidity heat and cold Allow 10cm space around the receiver for sufficient ventilation Do not cover the receiver s ventilation openings with items like newspapers tablecloths curtains etc Do not place any objects filled with liquids such as vases on the digital receiver Take care that no foreign bodies or liquids are getting into the device Do not expose the digital receiver to dripping or splashing liquids
15. ctions explained in chapter connecting the receiver please use the supplied power cord for connecting the apparatus to the power supply When running the receiver for the first time the welcome menu of the installation guide is displayed at the TV screen It helps you installing the most important settings Language of the menu Language 1 10 In the first step of the installation guide please select your language by using A or W Confirm your choice by OK Deutsch English Italiano Suomi Francais Ce amp tina T rkce Country In the next step please select your country Therefore press A V Country 1 9 and then OK If you want to get back to the language selection ountry you have to use the EXIT button Germany NOTE The choice of the country affects the the channel list a dii France Poland Antenna current In the final step of the installation assistant use the buttons Welcome Vor A to select whether the antenna current for an active DVB T indoor antenna should be switched on or off Antennapower 5V Complete installation with OK You can make any corrections using the EXIT button on n CAUTION The antenna current may be switched on only if the antenna really is an active indoor antenna with signal amplifier and is not already supplied with current through its own mains transformer or similar Otherwise this could cause a short circuit or destroy your antenna The menu for automatic c
16. el search Antenna Terrestrial Search mode Automatically Encrypted No 18 Installation Performing an automatic channel search Select the line Antenna using AW and Terrestrial using the lt or gt buttons Select the line Search mode using AW and Antenna using the lt or gt buttons In the line Encrypted select whether the channel search should also include encrypted channels using the lt or gt buttons No encrypted channels will be ignored Yes encrypted channels will be included in the search Move the cursor onto the line Start scan using the AW buttons and start the search process by pressing the OK button Now two windows are shown listing the newly found TV and radio programmes The Status window shows how far the search has progressed Display Scanning gt Search is active Display Complete Search is finished You can leave this menu by pressing EXIT If not finished the channel search algorithm is aborted If new channels are found you are asked to store them Yes Select your choice by lt gt and confirm with OK If selected YES the new channels are stored at the end of the channel list now Manual channel search In manual channel search you can enter the Channel search channels to be searched directly Antenna Terrestrial In the Installation menu move the cursor using the buttons AW onto the line Channel search and press the OK button The following menu will appear
17. er Timer You can use the record timer functionality to programme a recording for a connected video recorder Totally 10 record timers can be activated Or you can use the sleep timer to specify a time at which the receiver is to switch into standby mode Therefore please enter the Main menu by pressing Menu then select menu item Timer and confirm with OK Record Timer Sleep Timer Timer record timer Use A V to select line Record timer in menu Timer and press OK The following menu appears Record timer Timer index 1 30 1 inactive Start at 00 00 o clock Stop time 00 00 o clock Date of recording 01 03 10 Station 15 Eurosport Repetitions nothing Programming a record timer Select line Timer index 1 10 with AW There select timer place with 4 gt Select lines Start at Stop time or date of recording with using AW and confirm with OK Enter the required time or date by pressing 0 9 Confirm your input with using OK Select line Station with AW and confirm with OK Select a channel with AW or 4 gt and confirm with OK Select line Repetitions with AW and use 4 gt to specify the number of repetitions of this record Select line Activate and activate the programmed record timer by pressing OK there text Activate timer changes to Deactivate timer DANOARWNM gt o The receiver will switch on at the programmed time and signals a timer record by displaying rEC in the 4 digit LED Display If
18. et the best picture quality if you choose in the menu item Picture scaling 720x576 for all output signals b Television connected to HDMI Socket If your TV is only connected to the HDMI socket of the receiver you get the best picture quality if you choose in the menu item Picture scaling Input signal Output signal If you prefer fast channel switching all output signals must be the same Press EXIT to leave this menu For storing your modifications select Yes 4 or gt for keeping the previous settings select No Confirm your choice by pressing the OK button 14 Settings Settings Sound Sound settings Stereo Sound channel TV Stereo Sound channel Dig uncompressed 1 Sound setting Using lt or gt you can activate following audio modes Stereo Mono left or Mono right 2 Sound channel TV If the broadcasted programme offers different audio options you can select the desired audio output at the TV Scart by keys lt P gt 3 Sound channel digital If the broadcasted programme offers a digital audio channel you can use lt gt for selecting the audio signal that is to be output at the digital audio port Press EXIT to leave the menu If you want to save your modifications choose Yes for restoring the previous parameters choose No keys Confirm your choice by pressing the OK button Settings Subtitle Subtitle Off Subtitle language 1 Subtitle By using lt P gt you can ac
19. g harmful substances Pb battery includes lead Cd battery includes cadmium Hg battery includes mercury Hints for disposal If your device is once disused you should not just throw it into domestic waste Surely there is a collecting point for old devices where it can be collected and recycled 29 Trouble shooting Trouble shooting Every electric device can have a malfunction It does not automatically mean that it is defective In most cases it happens because of a feed cable plug and socket connections or access mistakes Please control the following items before taking the receiver to your specialised dealer Problem Possible causes Help Tips Receiver can not be turned ON Mains adapter not connected to mains Check if mains adapter is plugged in correctly Try another electric device at the same power socket Batteries of the remote control are not inserted inserted faulty Check batteries No or bad picture TV set is running on wrong channel Check set up of the TV set Scart or HDMI cable is damaged or plugged in incorrectly Replace or plug in the Scart or HDMI cable correctly No audio Volume is set too low Increase volume Cable damaged or plugged in incorrectly Check cable and ports Remote control does not work Distance to big Come closer to receiver point remote control directly towards receiver Batteries are exhausted
20. ge number Your input is displayed in the left corner on the screen When the site number is input completely the receiver starts to search the corresponding site Because the video text sites are sent site by site it may take some seconds until the required site is found Enter 100 at any time to return to the home page of the videotext You may use AY to quickly page through the complete videotext section of a particular TV channel If you press the TEXT button again you can switch into the mixed mode background transparent Use the TEXT button to return to the normal mode For leaving the video text please press EXIT 23 Connection of external mass storage device option Connection of external mass storage device option If an external mass storage device is connected to the USB Socket option on the rear side of the receiver it can be managed in the menu Mass Storage Device Important Before connecting or disconnecting the mass storage device the receiver must be switched to Standby In the Main menu choose the line Mass Storage Device with AW and confirm with OK This menu will appear Mass Storage Devi Information Formatting Information Move the cursor using the buttons A V onto the line Information and press the OK button In the superimposed window you will see details about the connected mass storage device Type size etc Use EXIT to leave this window Formatting Allows you to format
21. hannel search and the search process will be started During the search the window shows Status scanning The newly found TV and radio programmes will be listed Once the search is complete the message Status complete is shown Use EXIT to leave the search menu Please note New programmes found by the channel search will be added to the beginning of the list of stations You can set out the order of stations as you wish and delete programmes you do not want Operating the receiver Operating the receiver Switching receiver ON OFF This receiver is optionally equipped with a low power standby circuit If this function is activated the standby power consumption of the receiver is less than 1W The function is switched ON or OFF in the menu SETTINGS RECEIVER SETUP e Low Power Standby ON Switching on the receiver takes about 10 seconds Display boot e Low Power Standby OFF Receiver switches ON immediately You can switch on the receiver by pressing OK A V or by using one of the numeric buttons 1 0 The last activated channel will be displayed e g 0015 The digital receiver is switched into standby mode by pressing Q ATTENTION Only by pulling the mains adapter the receiver is disconnected from the power supply completely TV amp Radio mode You can choose between the operation mode TV viewing TV channels and RADIO listening to radio channels by pressing RADIO Volume control amp Muting The volume
22. ion press the Archive button to open up the list of recordings Press the LIST button The menu Select list will appear Use the AW buttons to select the sorting criteria and then press OK The list of recordings will be sorted as follows Alphabet The recordings will be put in alphabetical order Date of recording Sorted according to the date of the recording newest recording first Entry Sorted according to where the recording is filed on the mass storage device Recording length Sorted according to the size of the recording Renaming records While a recording is being made it s name will be formed automatically from the broadcast information You can however rename the recordings manually In normal operating press the Archive button The list of recordings appears Use AY to select the programme you would like to rename Then press the blue button This menu will appear Record list 21 06 2010 18 30 Sports 25 In the lower window you will see in the first line the name of the selected programme Below it available characters are shown Use the green button to switch between capital and lower case letters In the name use the red and blue buttons to select the characters you wish to change The current position that can be changed is highlighted in colour Now use the AW and lt P gt buttons to select the character you would like to insert Then press OK to insert the character in the name To accept the
23. lectronic Programme Guide Almost all TV and radio broadcasters provide further information on their programme Your receiver stores and decodes these data and displays them in the so called Electronic Programme Guide EPG This programme preview is activated by using the EPG button The appearing list contains all programmes of the current channel With AW or 4 gt you can select the programme you want to be informed about You can get more detailed information by pressing OK Also you can use the EPG list to program a record timer very easily Just press the yellow button and activate the record timer in the corresponding menu Please use EXIT to leave this on screen dialog Using serial interface The serial data interface DATA offers you the possibility to connect the receiver to a PC Therefore you need a PC and serial cable On the PC side a female SUB D connector with 9 or 25 pins and on Receiver side a RJ11 plug with 6 pins Via this connection you can perform software updates and channel lists up and downloads The required information and software tools are available at the manufacturers homepage Make a contribution to environmental protection Do not throw batteries into domestic waste As a consumer you are obliged to return used batteries You can bring them to a public collection station in your commune or elsewhere where batteries of the same type are sold The following signs can be found on batteries includin
24. lphabetic list mode the channels are sorted alphabetically It helps you searching a certain channel Therefore press LIST for displaying the alphabetic channel list and its char locator Then enter the char locator menu by pressing SWAP Use AW and lt gt for selecting the first letter of the searched channel and confirm by OK If available the channel list shows the wished channel now For re entering the channel list press SWAP for activating the channel use OK 4 Swap from current channel to the previous one Your receiver remembers the previous activated channel By pressing SWAP you can switch from the current to the previous channel By pressing SWAP again switch back to the current channel Every time you perform a channel change the title and start stop time of the current and the following programme are displayed in the channel change OSD on screen display Thereby the scale of progression below the programme number signals the temporal progress of the current programme If faded out you can display this information again by pressing OK 11 Settings Settings The basic functionality of the receiver is defined in the Settings menu Merely the derivation of your local time against the GMT Greenwich Mean time time needs to be corrected otherwise the displayed times may be wrong Hint At each on screen display the possible user inputs are explained in the help bar at the lower screen brink By pressing 4 and gt y
25. n Smartcard Reader Option The Digital Receiver is optionally equipped with a smartcard reader With an equal smartcard it is possible to unscramble encoded channels The smartcard can be inserted also while the receiver is switched on Insert the smartcard golden chip on lower side towards the receiver carefully into the slot at the front panel of the receiver After the smartcard is inserted the encoded programmes will be unscrambled SMARTCARD To open the menu of the smartcard first select Installation in the main menu and press OK to confirm Installation A submenu generated by the smartcard appears Installation on the screen Reception Channel search Select the submenu of the smartcard with A or W and Factory reset press OK to confirm For more information on using the smartcard see the menus shown or it s instruction manual 20 Channel list Channel list You can resort and or erase TV and radio channels found in the course of an automatic channel search This function is available for all TV and radio channels For entering the corresponding on screen dialog please press the Menu key to enter the Main Menu then select menu item Channel List and confirm with OK Following sub menu appears Channel List Edit main list Edit favourites list Channel list Edit main list This sub menu enables you to erase or move certain channels in the channel list For entering this menu
26. n F2 to show a list of all the markers A recording always has the markers Start and End Using A V you can now select a single marker Press the OK button to continue playback at the selected marker When the list of markers is open you can use the button to assign a particular function to a marker so that when playback reaches this marker the function is automatically performed You can assign the following functions to markers Press the button once the marker is interpreted as a loop When the playback reaches a loop marker it jumps to the previous marker A loop marker is labelled L in the list of markers A yellow vertical line is shown in the status indicator Press the button twice the marker becomes a jump marker When the playback reaches a jump marker it jumps to the next marker A jump marker is labelled J in the list of markers A white vertical line is shown in the status indicator Use jump markers e g to jump over commercial breaks Press the button three times this marker has no special function but can be used during playback as place for a loop or jump Press the red button to delete the selected marker from the list The Start and End markers cannot be deleted Press the F2 button or EXIT to close the list 00 17 22 BEA 00 20 30 1 00 00 00 Start 2 00 03 11 Mark1 J 3 00 08 58 Mark2 4 00 12 01 Mark3 L 5 00 20 30 End 28 EPG Electronic Programme Guide EPG E
27. new name press EXIT The newly modified name will now be shown in the list of recordings Operating the external mass storage device Option If an external mass storage device is connected to the USB Socket option on the rear side of the receiver you can store recordings on it The recording capacity depends on the size of the mass storage device and the data volume of the broadcast material Recording Various modes of recording area available for you to record programmes onto the mass storage device 1 Immediate recording Switch on the channel you want to record Press the red record button to record the current programme While the recording is running the programme continues to be shown on the screen To stop an immediate recording press the stop button 2 Timer recording You can record programmes onto a connected mass storage device in your absence using the Timer recording function Programme a Time recording as described in the chapter Timer Select the menu item Record on the mass storage device Select a channel during a record During a record all channels in the channel list which are in white colour can be seen Channels which are black cannot be seen during a record The channel which is recorded is marked with a red point in the channel list Timeshift function The Timeshift function enables you to record and playback at the same time This gives you various options 1 Time delayed television Y
28. onal If you want to set up the receiver where it can t be seen you can connect a so called IR mouse to the RJ 11 socket 9 This must be positioned in such a way that it can receive the signals from the remote control When installing the receiver always be sure to follow the safety and installation instructions Connecting an external mass storage device optional For recording of TV programmes an external mass storage device can be connected to the optional USB socket Connecting the mains adaptor Connect the DC plug of the mains adaptor supplied with the unit to the socket DC INPUT 12V 2 on the receiver How to insert batteries into the remote control Open the cover at the rear side of the remote control Insert two AAA type batteries 1 5V Attention Take care of appropriate polarity Note If the operational range of the remote control is getting smaller it indicates that the batteries are almost consumed Always replace both batteries Caution Do not heat disassemble or recharge the batteries Consumed batteries are not allowed to be disposed in domestic refuse They must be supplied to a facility collecting and disposing exhausted batteries according to the EU environmental protection rules Remote control Remote control x MUTE Sound ON OFF 0 9 Numeric input of channel numbers In Menu Input of numeric parameters frequency etc EPG Displays Electronic Progr
29. ont and rear panel Control elements front and rear panel 1 4 digit display optionally shows channel number 1a 2color LED shows ON OFF status Display red Receiver in standby mode Channel number green Receiver is ON rEC Timer activated 10 Smartcard reader optionally Digital Receiver RF DIGITAL AUDIO OUT IRIDATA 859 Connector for mains adapter 12VDC TV Scart port for connecting the TV HDMI Output digital Audio and Videosignal for connecting the TV USB socket for external mass storage device Option RF Input Digital Socket for terrestrial signal RF loop through Output NOOR WP Left side 8 Optical Outputsocket for DOLBY DIGITAL Signal 9 RJ 11 Socket Connection for an Infraredmouse and Interface for softwareupdate Connecting the receiver Connecting the receiver RF HF connection Connect the RF Input Digital socket 6 of the receiver to your antenna socket Connecting a television Use a scart cable to connect the TV socket 3 on the receiver to the corresponding scart socket on the television set HDMI output 4 If your receiver is connected to the TV by a HDMI cable audio and videosignal are digital Connecting a digital multi channel amplifier optional The receiver is optionally available with an AUDIO OUT socket 8 for a DOLBY DIGITAL signal Use a suitable cable to connect this socket to your multi channel amplifier Connecting an IR mouse opti
30. ou can change the corresponding settings When leaving a menu EXIT button you will be asked to store the performed modifications Yes or to keep the previous settings No Please choose one of these possibilities by pressing A W and confirm your choice by OK Turn on the receiver by pressing For entering the main menu please press the MENU button The main menu is displayed Settings Installation Channel list Timer Information Mass Storage Device Hint Mass Storage Device is only shown in the menu if an external Mass Storage Device is connected at the USB Socket Option Press the OK button The following menu is displayed Receiver Setup The first line Receiver Setup is marked Picture Sound Subtitle OSD configuration Parental Lock Choose this menu item by pressing AW and confirm by OK 12 Settings Settings Receiver setup The following menu is displayed Receiver setup Time difference 41 00 hrs Menu language English Initial volume 90 HDMI Audio Bitstream Off Auto Standby On Low Power Standby On 1 Time difference When operating the receiver for the first time you should set the derivation between your local time and the received GMT time Greenwich Mean Time by pressing lt or gt For Central Europe the following settings are recommended Winter time 1 00 hour Summer time 2 00 hours Note This setting has to be updated at each summertime shift 2 Menu language Choo
31. ou can watch the beginning of the recording and jump over recorded passages e g commercial breaks Press the red record button to start a timeshift recording To watch the partially recorded programme press the Playback button The programme is then played from the moment of recording while the current programme continues to be recorded in the background If you want to stop the playback and return to normal TV operation press the Stop button To stop a timeshift recording press the Stop button 26 Playback 2 Recordings saved on the mass storage device can be played during timeshift recording During the timeshift recording press the Archive button to open the list of recordings Use AY to select the recording you wish to see Press OK to start the playback The playback information will be shown on the screen If you want to stop the playback and return to normal TV operation press the Stop button To stop a timeshift recording press the Stop button Playback In normal operation press the Archive button to open the list of recordings Use A V to select the recording you wish to see Press OK to start the playback Playback is stopped using the Stop button Choosing the audio channel for recordings When playing back recordings you can choose between the different audio channels During playback press the button Option Now a menu with the available audio channels will be shown Use the A W buttons to select the audio ch
32. se your language by pressing 4 or gt 3 Initial volume The initial volume after a power reset of the receiver is adjusted here by pressing lt or gt 4 HDMI Audio Bitstream HDMI Audio Bitstream can be switched ON or OFF by pressing 4 or 5 Auto Standby If this function is activated ON and no button is pressed on the remote control for 3 hours the receiver switches to Standby Modus automatically 6 Low Power Standby Low Power Standby function can be switched ON or OFF by pressing 4 or gt 18 Settings Settings Picture For entering the Picture menu select menu item Picture in the Settings menu and press OK The following menu appears Scart output TV 1 SCART output TV Display format 4 3 The video output at the Display adjustment Letterbox SCART socket can be Picture scaling modified by pressing lt or gt gt Input 720x576 Output 1920x1080 You can select among Input 1280x720 Output 1920x1080 following options FBAS gt Input 1920x1080 Output 1920x1080 RGB or YUV 2 Display format Use lt or gt for selecting the screen format of your TV set 4 3 16 9 3 Display adjustment Use lt or gt for adjusting the video signal pan amp scan letterbox pillar box or centre 4 Picture scaling Here you can choose the picture resolution 720 x 576 1280 x 720 1920 x 1080 a Television connected to Scart Socket If your TV is only connected to the scart socket of the receiver you g
33. tivate deactivate the display of DVB subtitles if transmitted 2 Language of the subtitle To select the language of the subtitle you must use lt or Pm If there is no subtitle available this is indicated by Use EXIT to leave the menu If you want to save the modifications choose Yes for restoring the previous parameters choose No keys lt P gt Confirm your choice by pressing the OK button 15 Settings Settings OSD Configuration Option For entering the OSD configuration menu please select menu item OSD configuration in the Settings menu and press OK The following menu appears OSD configuration Display time 5s OSD colour blue 1 Display time By using 4 or gt you can modify the display duration of the channel change graphics 1 10 seconds 2 OSD colour You can choose the colour of the OSD display by pressing lt or gt Press EXIT to leave this menu If you want to store your modifications select Yes by pressing 4 or gt For the restoring the previous settings you have to choose No Confirm your choice by using OK 16 Settings Settings Parental lock Your receiver is equipped with a parental lock This secures the receiver against unauthorised use When the parental lock is activated the receiver can only be switched on after entering a 4 digit PIN code In the Main menu use the A V Parental Lock buttons to move the cursor to the line Parental lock and press
34. you want to abort a record please enter the record timer menu and deactivate the timer by pressing the Deactivate button If you push one of the buttons AW or lt P following menu appears Record active Stop Yes No Choose Yes to stop the record or No to continue the record Hint Please make sure that the local time of the receiver is set correctly and the video recorder is programmed too 22 Information Information Enter the main menu there use A V to select line nformation and press OK In the upper section of the menu the channel parameters of the activated channel are displayed In the lower section of the menu the signal qualities are displayed Level The further the bar turns right the better the reception C N The further the bar turns right and the higher the dB value the better the signal quality Hint The power of the signal depends on the antenna set up and also on the currently activated channel Please remember this if you want adjust your antenna by controlling the signal power After pressing the 4 gt or the yellow button two further charts with channel software and hardware information are displayed With AW you can change the channel Use EXIT to leave this menu Videotext Press the TEXT button to display the videotext of the current channel The first site to be seen is site number 100 In order to view a specific page use the buttons 0 9 to enter the three digit pa
Download Pdf Manuals
Related Search