Court-Top 1200 Serial number:
Contents
1. position independently iN Switch the tractor engine off before getting off the tractor 3 Firmly hold the machine and release the pin 1 Slowly tilt the machine so that it rests on the surface on the brushes see Fig 8 12 Fig 9 4 Lift the top rod 2 and secure it with this pin 1 see Fig 9 5 Now agjust the top rod 2 so that the machine is level and resting on the surface without exercising pressure on the vehicle 6 Adjust the leveller of the machine from a stationary position as described in section 4 0 7 Increase the driving speed up to a maximum of 12 Km h 7 5 mph Stopping takes place as follows 1 Slowly bring the vehicle to a stop M Ensure that the tractor is properly blocked and cannot move position independently iN Switch the tractor engine off before getting off the tractor 2 Release the pin 1 from the top rod and slowly tilt the machine upward Now secure the hitch with the pin 1 so that machine rests on its wheels again and the brush frame is in a vertical position 3 Ride the machine away 13 9 0 DISCONNECTING THE COURT TOP Fig 10 The machine can be disconnected from the tractor in the following manner See Fig 10 1 Drive the Court Top to a storage area with a stable level surface Ensure that the tractor is properly blocked and cannot move position independently Switch the tractor engine2. CHNICAL DATA Model Court Top 1200 Court Top 1500 Operating width 1200 mm 47 3 1500 mm 59 Operating depth 5mm lt gt 435mm 0 17 1 38 5mm lt gt 435mm 0 1 1 38 Driving speed Max 12 Km h 7 5 mph Max 12 Km h 7 5 mph Weight 77 Kg 346 Ibs 95 Kg 346 Ibs Shipping dimensions 867 1355 x 875 mm 867 x 1655 x 875 mm LxWxH 34 1 x 53 3 x 34 5 34 1 x 65 2 x 34 5 Standard parts Height adjustable tow bar Height adjustable tow bar Height adjustable leveller Height adjustable leveller 2 0 GENERAL DESCRIPTION The Court Top is a brush machine for treating artificial grass fields 3 0 CONNECTING A VEHICLE Check procedure before proceeding to connect the Court Top Check the Court Top for visual damage and repair this damage if the safe operation of the machine is no longer guaranteed Check that all nuts and bolts are properly secured Check that all safety stickers are in place on the machine and are damaged The machine must NEVER be used without these Fig 6 The Court Top can be connected to the vehicle using the towing hook The method is as follows Fig 6 1 Carefully reverse the vehicle into a suitable position for connecting the towing hook 1 to the vehicle M Ensure that the vehicle is properly blocked and cannot move position independently Switch the vehicle engine off before ge
3. User manual and parts book Court Top 1200 Serial number Original user manual NOTE IN THE INTERESTS OF SAFETY AND ACHIEVING THE BEST RESULT IT IS VERY IMPORTANT THAT THIS MANUAL IS READ CAREFULLY BEFORE USING THE COURT TOP Redexim e Kwekerijweg 8 3709JA Zeist The Netherlands T 81 306933227 F 31 306933228 E verti drain redexim com www redexim com 1339 English 946 120 000 FOREWORD Congratulations with the purchase of your Court Top This manual must be read carefully in order to ensure safe and long term operation of this Court Top oafe operation of this machine is not possible if the user is not fully familiar with the contents of this manual The Court Top is not a stand alone machine It is the responsibility of the user to use the correct tractor The user also has to perform safety related checks on the tractor Court Top combination including sound level user instructions and risk analysis The general safety instructions will be covered on the next page All users must be familiar with and apply these instructions There is a registration card below which must be sent back in order to process any future claims This user manual contains numerous instructions which are numbered in sequence This working sequence must be adhered to The pictogram indicates safety instructions The CE pictogram indicates a tip and or no
4. activities Connect the Court Top to the pulling vehicle as stated in the instructions Injury hazard Ensure that you have a clear long distance view and clear sight of the immediate vicinity There are safety stickers Fig 2 3 and 4 on both sides of the Court Top Fig 5 with an identical meaning These safety stickers must be clearly visible and legible at all times and replaced when damaged Persons must STAY out of hazard zone of the Court Top when operational as there is a physical injury hazard due to airborne material Fig 3 933 280 402 Fig 4 Fig 3 Maintain a safe distance of at least 4 metres Fig 4 Observe the permitted lifting capacity of the pulling vehicle Wear appropriate clothing Wear steel toecap safety shoes long trousers secure long hair and do not wear loose clothing f 3 N IN AN W HN N NN NN m aa NN NN VL NN DE SIN NON 204 d NN P NES J gt NN NN L J Z XN M Cy LN 3 1027 Q D ces Be aay P 73 N N N N EN AON SN SS X zi N e 7 Locations of safety stickers Fig 5 EU DECLARATION Redexim BV Utrechtseweg 127 3702 AC Zeist the Netherlands declare entirely under our
5. ecommended in relation to excessive wear and tear and damage to the machine and the surface to be treated 10 7 0 THE USE OF THE COURT TOP The following checks must be made before proceeding to use the Court Top at a site 1 2 3 Are there any freestanding objects in the field Remove them first Are there slopes This machine is only suitable for use on slopes with a maximum gradient of 20 degrees Always work from the top to the bottom Are there are any airborne objects in the area such as balls which will distract the user from the task at hand If so then the Court Top may NOT be used Is there a hazard of sliding or subsiding If so postpone the activities until conditions improve Do not make any sharp turns as this may cause damage to the surface Do not adjust the machine too deeply this may result in undesired damage to the surface 11 8 0 START STOP PROCEDURE The start procedure is VERY important The surface to be treated can be seriously damaged if this procedure is not executed as described below The start procedure is as follows 1 Thoroughly check the Court Top for loose parts and check that all parts are working properly M If loose parts are discovered or incorrectly functioning parts then the problem must be rectified before using the Court Top 2 Drive to the site to be treated Fig 8 M Ensure that the tractor is properly blocked and cannot move
6. fective and the person who performed the modifications is responsible for arranging new CE marking Check the Court Top for loose bolts nuts parts prior to each use The Court Top may NEVER be used if the safety stickers are not present NEVER crawl underneath the Court Top Tilt the Court Top if required NEVER get off the tractor while the engine is still running The Court Top must be blocked to prevent it from lowering driving off sliding away when performing maintenance adjustment and repair activities Always switch off the tractor engine and remove the tractor ignition ke when performing maintenance adjustment and repair activities Fig 2 Fig 2 Only use original Court Top parts for maintenance or repair activities in relation to the safety of the machine and user Repairs to the Court Top must be performed by authorised technical staff Maintain a repairs record In addition to the instructions in this user manual the prevailing safety standards and Occupational Health and Safety regulations must be observed The governing procedures of the traffic regulations apply to use on public highways Transport of persons is not permitted Do not use the Court Top during hours of darkness heavy rain storm or on slopes with a gradient greater than 20 degrees All persons using the Court Top must be familiar with all functions and operational elements of the machine prior to commencing the
7. off before getting off the tractor 2 Release the locking pin from the towing hook and disconnect the towing hook of the machine from the vehicle 3 Now slowly lower the towing hook of the machine to the surface Ensure that the Court Topis in a stable position and cannot roll slide otart the vehicle and drive away lt gt When putting into storage it is recommended that the spring pins brush do not come into contact with the surface or other objects otherwise the spring pins brush hairs will bend 14 10 0 TROUBLESHOOTING Problem Possible cause Solution Not enough material Machine is not level Level the machine loosened Leveller setting is too deep Reduce depth setting on Poor field appearance after Leveller setting is too deep Reduce depth setting on leveller treatment Leveller setting is not deep Increase depth setting on leveller enough Brushes are damaged Replace or repair 11 0 MAINTENANCE Time schedule Checkpoint Lubrication frequency point Prior to each use Check for loose bolts nuts Tighten the loose bolts nuts with the correct moment Presence and legibility of the Replace if not present safety stickers damaged 15
8. own responsibility that the product COURT TOP WITH MACHINE NUMBER AS STATED ON THE MACHINE AND IN THIS MANUAL to which this statement relates is in accordance with the provisions of the Machine Directive 2006 42 EG Zeist 01 10 12 A C Bos Manager Operations amp Logistics Redexim Holland TABLE OF CONTENTS WARRANTY CONDITIONS 2 inan paa ape pla a wc cece ne CUu EAT RE Cua RE cece cae enemas 2 REGISTRATION GARD a au RE ces ER EE nea RETE oe Ru EO Da CELO x MERECE n EUREN 2 SAFETY INSTRUCTIONS I 3 ize m i f TION e 6 T0 TECHNICAL Pu eo un de con Ee iae eeu ein ee Coates 8 2 0 GENERAL DESCHIPTION erc a dc onde iode ces 8 30 CONNECTING TO VEHICLE Pon aae guo axe eu so niet sar 9 4 0 HEIGHT ADJUSTABLE LEVELLENR 10 5 0 TRANSPORT OF THE COURT TOP ceres nne 10 60 OPERATING SPEED 2 2 2 22 58 95 85 0620 52 00559310 ice rte kc ee itas c ee 10 70 THE USE OF THE SNYeERESBAT 11 9 0 START STOP PROCEDURE od ne ea oae 12 9 0 DISCONNECTING THE COURT TOP 14 100 TROUBLESHOOTING eii co Po ono de cu 15 TO MAINTENANCE iiaa a 15 1 0 TE
9. te All information and technical specifications used are the most recent at the time of publication Design specifications are subject to change without notice This document is a translation of the original user manual The original user manual Dutch language is available on request WARRANTY CONDITIONS THIS COURT TOP IS SUPPLIED WITH A WARRANTY FOR DEFECTS IN MATERIALS THIS WARRANTY IS VALID FOR A PERIOD OF 12 MONTHS FROM THE DATE OF PURCHASE COURT TOP WARRANTIES ARE SUBJECT TO THE GENERAL CONDITIONS FOR SUPPLY OF PLANT AND MACHINERY FOR EXPORT NUMBER 188 PUBLISHED UNDER THE AUSPICES OF THE UNITED NATIONS ECONOMIC COMMISSION FOR EUROPE REGISTRATION CARD Complete the table below for your own records Dealer name Purchase date Comments 1 SAFETY INSTRUCTIONS The Court Top is designed for safe use This is only possible if the safety instructions defined in this manual are observed in full Read and understand Fig 1 the manual before proceeding to use the Court Top Failure to use the machine as described in the manual can result in personal injury and or damage to the Court Top Use of the machine requires operation by a competent user who has proficiently adjusted the machine to suit the surface for treatment The manufacturer accepts no liability whatsoever for incompetent use and any damage arising from this the user bears full responsibility for all risks arising from
10. this The prompt and correct execution of the user maintenance and repair instructions prescribed by the manufacturer also constitutes competent use Inspect the area for treatment prior to using the Court Top Remove any free standing obstacles and avoid irregularities The Court Top has been manufactured in accordance with the latest technological knowledge and is safe for use There is a risk of injury for the user and third parties if the machine is inexpertly operated maintained or repaired This must be avoided Always use the Court Top Air in combination with the correct tractor as defined in the technical data All persons appointed by the owner as authorised to operate perform maintenance on or repair the Court Top must have read and fully understood the contents of the operation manual and the Safety quidelines section in particular The user is responsible for a safe Tractor Court Top combination The system as a whole must be tested for sound safety risk and ease of use User instructions must also be drawn up The user has an obligation to check the Court Top for visible damage and defects before use Changes to the Court Top including the operation that are detrimental to safety must be rectified immediately For safety reasons adapting or adding to the Court Top with the exception of factory approved changes is not permitted as a rule Modifications to the Court Top will render the current CE marking inef
11. tting off the vehicle 2 Connect the towing hook 1 of the machine to the vehicle and secure it with the locking pin The machine is now in the upright position Ensure that all locking pins are properly secured 3 Start the vehicle and drive away 4 0 HEIGHT ADJUSTABLE LEVELLER The levelling height be adjusted by adjusting the leveller Fig 7 The leveller can be adjusted by slightly loosening the 4 bolts 1 Once loosened the height of the leveller 2 can be adjusted Once adjusted properly secure the bolts 1 again Adjust both sides of the machine to the same height so that the field is cleaned as evenly as possible Fig 7 NEVER adjust the machine in a way that will cause damage to the surface to be treated M IMPORTANT Before using the machine check the operating depth on the surface to be treated from a stationary position 5 0 TRANSPORTING THE COURT TOP The user is responsible for transporting the Court Top behind the vehicle on public roads Consult national legislation for the regulations The maximum speed across open fields with the machine elevated is 20 km hour 12 4 mph circumstances permitting on account of the weight of the Court Top Driving at higher speeds constitutes a potential hazard for the driver bystanders and may even cause damage to the machine 6 0 OPERATING SPEED The operating speed is restricted to 12 km h 7 5 mph Driving at higher speeds is not r
Download Pdf Manuals
Related Search