City Painter 2500 Flood
Contents
1. ON PrOl OL ee D DMX Addressing DMX Channels Symbol LCD Description and Function Digtal FIC TIC VO BS Tm ____ ___ _____ _6___6____ lg ip Maintenance Changing the Lamp Replacing the Fuse Troubleshooting No Light No Response to DMX Electrical DIGG OM TR PEO CGT DEC _ _ 4 ___ WARNING CAUTION Keep this device away from rain and moisture Unplug mains lead before opening the housing FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires Before your initial start up please make sure that there is no damage caused by transportation Should there be any consult your dealer and do not use the device maintain perfect condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual Please consider that damages caused by manual modifications to the device are not subject to warranty his device contains no user se2. City Painter 2500 Flood ORDERCODE 40904 SHOWELECTRONICS FOR PROFESSIONALS Congratulations You have bought a great innovative product from Showtec The Showtec City Painter 2500 brings excitement to any venue Whether you want simple plug amp play action or a sophisticated DMX show this product provides the effect you need You can rely on Showtec for more excellent lighting products We design and manufacture professional light equipment for the entertainment industry New products are being launched regularly We work hard to keep you our customer satisfied For more information iwant showtec info You can get some of the best quality best priced products on the market from Showtec So next time turn to Showtec for more great lighting equipment Always get the best with Showtec Thank you Showtec Showtec City Painter 2500 Product Guide Warning Safety instructions Orne 1 1 Description 21 Features end Installation Installing the Lamp Set Up and T mmTMMTES OS GF CGS eem MOMOE
3. 3 fuses 3X 15A on the PCB Board Fig 7 3 Remove the used fuse If brown or unclear it is burned out 4 Insert the replacement fuse into the holder where the old fuse was Reinsert the fuse cover Be sure to use a fuse of the same type and specification See the product specification label for details Fig 7 12 Troubleshooting No Light This troubleshooting guide is meant to help solve simple problems If a problem occurs carry out the steps below in sequence until a solution is found Once the unit operates properly do not carry out following steps If the light effect does not operate properly refer servicing to a technician Response Suspect three potential problem areas the power supply the lamp the fuse 1 Power supply Check that the unit is plugged into an appropriate power supply 2 Ihe lamp Replace the old lamp with a new one with the same specifications See page 6 for replacing lamps 3 The fuse Replace the fuse See page 12 for replacing the fuse No Response to DMX Response Suspect the DMX cable or connectors a controller malfunction a light effect DMX card malfunction 1 Check the DMX cable Unplug the unit change the DMX cable then reconnect to electrical power Try your DMX control again 2 Determine whether the controller or light effect is at fault Does the controller operate properly with other DMX products 9 If not fake the controller in for repair If so take the DMX cable and t
4. When using multiple City Painters make sure you set the DMX addresses right Therefore the DMX address of the first City Painter should be 0 000 the DMX address of the second City Painter should be 0 5 5 005 the DMX address of the third City Painter should be 5 5 10 010 the DMX address of the fourth City Painter should be 10 5 15 015 etc Please be sure that you don t have any overlapping channels in order to control each City Painter correctly If two or more City Painters are addressed similarly they will work similarly For address settings please refer to the instructions under DMX 512 Mode Controlling After having addressed all City Painter fixtures you may now start operating these via your lighting controller Note After switching on the city Painter will automatically detect whether DMX 512 data is received or not If the device doesn t work with DMX the problem may be he XLR cable from the controller is not connected with the input of the City Painter The controller is switched off or defective the cable or connector is detective or the signal wires are swapped in the input connector Note It s necessary to insert a XLR termination plug with 120 Ohm in the last fixture in order to ensure proper transmission on the DMX data link DMX Channels Channel 1 Speed 0 255 From slow to fast to control the changing speed of the three colors Channel 2 Adjust light Open light 0 255 Change t
5. gloves and goggles when replacing the lamp Always read all the safety warnings at the beginning of this manual before replacing the lamp The broken lamp must be placed in a safe spot so it cannot fall or break because of danger of explosion The lamp is chemical waste and may not be thrown away Bring this lamp to a designated collect point for chemical waste Procedure 1 Disconnect power before replacing the lamp 2 Loosen the 2 screws A on the aluminum housing and remove them Gently open the metal housing B 3 Remove the two lateral reflectors C and remove the pommels D Take out the old lamp 4 Read lamp instructions Do not touch the lamp bulb glass Oil on hands shortens the lamp life If you touch the bulb glass wipe off the glass with a clean lint free towel and rubbing alcohol Hold the pommels tightly D and put the two lateral reflectors C back and fasten the screws snugly Close the metal housing B and fasten the screws A snugly Oo Set Up and Operation Follow the directions below as they pertain to your preferred operation mode Before plugging the unit in always make sure that the power supply matches the product specification voltage Do not attempt to operate a 120V specification product on 230V power or vice versa One City Painter 1 Leave at least 1 meter on all sides for air circulation 2 Plug one end of the electric mains power cord into the IEC socket on the u
6. 00 SFa21 500 hr 240000 Lumen ordercode 809030 Philips MSI 2500 SFa21 12 600 hr 240000 Lumen ordercode 80903P Sylvania BA 2500 DE 500 hr 240000 Lumen ordercode 809035 Electro mechanical effects DMX control via standard DMX controller Color effect 3 Colors Red Yellow Blue white CYM Color changing step Stand alone Master Slave DMX controlled Minimum distance Minimum distance from flammable surfaces 2m Minimum distance to lighted object 5m Versions for other lamps may be produced Please check the specification label on your product Design and product specifications are subject to change without prior notice Website www Highlite nl Email service highlite nl HIGHLITE 7 INTERNATIONAL 16 2007 Showtec
7. R termination plug with 120 Ohm in the last fixture in order to ensure proper transmission on the DMX data link Multiple City Painters Set Up Light 1 DMX Set up DMX 512 CONSOLE _ Master Slave Set up TERMINATION RESISTOR Fig 4 Note Link all cables before connecting electric power 5 f the lines have a total length over 150 200 meters it is recommended to use a signal amplifier The usage of a normal microphone or audio cable is suggested only for lines max 100 meter long DMX 512 CONSOLE 1 200 a TERMINATION SIGNAL AMPLIFIER RESISTOR Fig 5 6 To ensure the IP54 rate you have to connect the DMX cable inside the base Use the provided cables A and connect the cable numbering B Fig 6 7 The lamp is a discharge lamp so it takes about 5 minutes to light the lamp completely Wait at least 15 minutes to let the lamp cool down completely before restarting this unit 8 The light has a self checking function The device starts operation after the self checking function 8 DMX Protocol The City Painter 2500 can be operated with a controller in control mode or without the controller in stand alone mode Control Mode DMX Addressing The control panel on the front side of the base allows you to assign the DMX fixture address which is the first channel from which the City Painter will respond to the controller Please note when you use the controller the unit has 5 channels
8. UTION EYEDAMAGES AN Avoid looking directly into the light source meant especially for epileptics OPERATING DETERMINATIONS This device is not designed for permanent operation Consistent operation breaks will ensure that the device will serve you for a long time without defects The minimum distance between light output and the illuminated surface must be more than 5 0 meter The maximum ambient temperature ta 45 C must never be exceeded The relative humidity must not exceed 50 with an ambient temperature of 45 C 3 If this device is operated in any other way than the one described in this manual the product may suffer damages and the warranty becomes void Any other operation may lead to dangers like short circuit burns electric shock lamp explosion crash etc You endanger your own safety and the safety of others Improper installation can cause serious damage to people and property Connection with the mains Connect the device to the mains with the power plug Always pay attention that the right color cable is connected to the right place International EU Cable UK Cable US Cable P BROWN YELLOW COPPER FASE BLUE BLACK SILVER 15 YELLOW GREEN GREEN GREEN EARTH Make sure that the device is always connected properly to the earth Improper installation can cause serious damage to people and property Description of the device Features The Showtec City Painter 2500
9. act with water or other liquids 2 Only operate the fixture after having checked that the housing Is firmly closed and all screws are tightly fastened Only operate the device after having familiarized with its functions Avoid flames and do not put close to flammable liquids or gases Always replace the lamp when it is damaged or deformed due to the heat Always keep case closed while operating Always allow free air space of at least 2 meters around the unit for ventilation Always disconnect power from the mains when device is not used before cleaning or when replacing lamp Only handle the power cord by the plug Never pull out the plug by tugging the power cord Always disconnect from power when installing transporting or moving this device Make sure that the device is not exposed to extreme heat moisture or dust Make sure that the available voltage is not higher or lower than stated on the rear panel Make sure that the power cord is never crimped or damaged Check the device and the power cord from time to time Make sure that the core diameter of extension cords and power cords is sufficient for the required power consumption of the device This device uses 2680W Make sure you use the right kind of wiring otherwise wrong wiring can cause fire and short circuit If the lens is obviously damaged it has to be replaced So that its functions are not impaired due to cracks or deep scratches If device is dropped or stru
10. ck disconnect mains power supply immediately Have a qualified engineer inspect for safety before operating If the device has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature If your Showtec device fails fo work properly discontinue use immediately Pack the unit securely preferably in the original packing material and return it fo your Showtec dealer for service For adult use only City Painter must be installed out of the reach of children Never leave the unit running unattended For replacement use lamps and fuses of same type and rating only Allow 15 minutes to cool down before opening the cover and replacing lamp The lamp can still be hot so be careful The user is responsible for correct positioning and operating of the City Painter The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device This device falls under protection class Therefore it is essential to connect the yellow green conductor fo earth During the initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective Repairs servicing and electric connection must be carried out by a qualified technician WARRANTY Till one year after date of purchase CA
11. e fixture serviced by a qualified technician Install a phase reversing cable erratically or not at all to the controller 3 pin XLR Out on the fixtures does between the fixtures or swap pin 2 not match pins 2 and 3 reversed and 3 in the fixture that behaves erratically The power supply settings do not Disconnect fixture Check settings No light match local AC voltage and page 6 and correct if necessary frequency Allow fixture to cool Lamp cuts out Fixture is too hot Clean fan intermittently Make sure air vents at control panel and front lens are not blocked Turn up the air conditioning The power supply settings do not Disconnect fixture Check settings match local AC voltage and page 6 and correct if necessary frequency 14 Electrical Diagram N z 5 AC230V IN e Temperature switch d switch 2 ct teh 22 Tempenit 24 LJ 2 54 CERN 1 8 2 z DEED Tk SIL ITR Product Specification Model Showtec City Painter 2500 Voltage 240V 50Hz CE Power 2680W Fuse 3x 15 Dimensions 800x520x750mm LxWxH incl handles Weight 62 4 kg Operation and Programming Signal OUT pin 1 earth pin 2 pin 3 DMX Channels 5 Signal input 3 pin XLR male Signal output 3 pin XLR female Lamp Allowed lamp models Osram HMI 25
12. he light effect to a qualified Technician See next page for more problem solving 13 Probable cause s No power fo the fixture Check that power is switched on One or more and cables are plugged in completely dead Primary fuse blown Replace fuse Fixtures reset The controller is not connected Connect controller 3 pin XLR Out of the controller Install a phase reversing cable does not match XLR Out of the first between the controller and the first fixture on the link i e signal is fixture on the link reversed correctly but all respond erratically or not at all to the controller Check data quality If much lower than 100 percent the problem may be a bad data link connection poor Poor data quality quality or broken cables missing termination plug or a defective fixture disturbing the link Inspect connections and cables Bad data link connection Correct poor connections Repair or replace damaged cables Data link not terminated with 120 Insert termination plug in output jack Fixtures reset eae Ohm termination plug of the last fixture on the link oe t addressing of the fixt Check add tt some respond ncorrect addressing of the fixtures eck address setting _ Bypass one fixture at a time until normal operation is regained unplug One of the fixtures is defective and both connectors and connect them disturbs data transmission on the directly together link Have the defectiv
13. he light for open and adjust Channel 3 Red 0 255 Change the color brightness Channel 4 Blue 0 255 Change the color brightness Channel 5 Yellow 0 255 Change the color brightness Symbol LCD Description and Function Up selecting key Down selecting key Open it for each addressing Enter for confirmation Digtal LCD LCD WORDS FUNCTION ADDR Channels for addressing 1 512 GAME Set Speed for fastest 255 for slowest MODE Control made MAST for main SLAV for slave DMX for DMX512 REST Self check Function Mode ADDRESS menu ve lt uP pow A001 512 7 Enter GAME MENU we pown GAMEENrER pown G001 G033 58 15 Ted rone Fon nn MODE ur MODE Enren ur own SLAV enter menu ue pow MODE Enren S we oom DMX c fenter REST ve pow e REST Enren Beam Opening IP RATE The declared IP rate of the City Painter only works if you meet the following comes conditions Install the fixture on a wide and stable surface e The air cooling input and output are located on the base of the side shell it is not possible to install the fixture outdoor with the ballast upwards You must use the filter supplied with the basic kit for the IP 54 rate The City Painter has a IP 44 rate without filters installed and 54 rate with the filters installed You must use the filte
14. is a colourchanger with high output and great effects DMX control via standard DMX controller 5 DMX control channels required e P 54 Protection degree Stand alone control or Master Slave control Colours Full CMY colourmixing e Strobe 1 7 2 Colour Temperature 5600K Flux 240000 Lux Dimmer 0 100 Lamp HMI 2500 Case D7481B not included Note If the lamp has been turned OFF let the lamp cool down for 15 minutes before turning the lamp ON again Overview vie os Eos a2 hat Fig 1 Backside 3 PINCONNECTOR FOR POWER INPU 1 NEUTRAL N 2 LIVE 3 EARTH 7 IT 5 Fig 2 Installation Installing the Lamp The Showtec City Painter 2500 uses the HMI 2500 ordercode 809030 80903P 80903S bulb as manufactured by all popular manufacturers Use only the appropriate lamp for your unit Note that product versions that use other lamps may be offered in the future Check your product specification label for information Always disconnect from electric mains power supply before changing lamps The lamp has be replaced when 1 is damaged or deformed due to the heat Do not install lamps with a higher wattage Lamps with a higher wattage generate temperatures the device was not designed for Damages caused by non observance are not subject to warranty Always read the safety instructions that are included with the lamp Always wear
15. nit Then plug the other end of the cord into a proper electric power supply socket Multiple City painters 1 Leave at least 1 meter on all sides for air circulation 2 Use a 3 p XLR cable to connect the City Painters and other devices Occupation of the X LR connecti on DMX OUTPUT DMX input X LR mounting socket XLR mounting plug 1 Ground 1 Ground 2 Signal 2 Signal 3 Signal 3 Signal The transformation of the controller line of 3 pins and 5 pins plug and socket 5 Pins canon socket Pin 1 GND screen Pin 2 Signal Pin 3 Signal Pin 4 N C Pin 5 N C 3 Pins canon plug Pin 1 GND screen Pin 2 Signal Pin 3 Signal 5 Pins canon plug Pin 1 GND screen Pin 2 Signal Pin 3 Signal Pin 4 N C Pin 5 N C 3 Pins canon socket Pin 1 GND screen Pin 2 Signal Pin 3 Signal 3 Link the units as shown Connect a DMX signal cable from the first Unit s DMX out socket the second unit s in socket Repeat this process to link the second third and fourth units 4 Supply electric power Plug electric mains power cords into each unit s IEC socket then plug the other end of the mains power cord into proper electric power supply sockets starting with the first unit Do not supply power before the whole system is set up and connected properly Note It s necessary fo insert a XL
16. r you should keep the unit clean Otherwise the fixture s light output will be significantly reduced Disconnect the mains power supply and then wipe the cover with a damp cloth Do not immerse in liquid Wipe lens clean with glass cleaner and a soft cloth Do not use alcohol or solvents The cooling fans colour filters and the internal lenses should be cleaned monthly with a soft brush Please clean internal components once a year with a light brush and vacuum cleaner Keep connections clean Disconnect electric power and then wipe the DMX and audio connections with a damp cloth Make sure connections are thoroughly dry before linking equipment or supplying electric power Changing the Lamp 1 Disconnect power before replacing the lamp 2 Loosen the 2 screws A on the aluminum housing and remove them Gently open the metal housing B 3 Remove the two lateral reflectors C and remove the pommels D Take out the old lamp 4 Follow directions for installing a new lamp page 7 Replacing a Fuse Power surges short circuit or inappropriate electrical power supply may cause a fuse to burn out If the fuse burns out the product will not function whatsoever If this happens follow the directions below to do so 1 Unplug the unit from electric power source Unlock the 2 clamps on the lower front of the device Unscrew the small hexe screw Then tilt the upper part of the head 2 On the right side you will see a PCB Board There are
17. rs in critical working conditions and normal when the fixture works outdoor You must remove the filters when the ambient temperature is over 35 C You must regularly clean the filters to allow the correct cooling of the fixture Installation of the dust proof filters 7 You must remove the 2 side protective shells The 2 filters must be assembled on the bulkheads at the bottom of the side brackets Pay attention The dust proof filters must stick correctly to prevent the entrance of the dust You must control that the 2 filters completely cover the overall of the air entrance 11 Maintenance The operator has to make sure that safety relating and machine technical installations are to be inspected by an expert after every four years in the course of an acceptance test The operator has to make sure that safety relating and machine technical installations are to be inspected by a skiled person once a year The following points have to be considered during the inspection 1 All screws used for installing the device or parts of the device have to be tightly connected and must not be corroded 2 There may not be any deformations on housings fixations and installation spots 3 Mechanically moving parts like axles eyes and others may not show any traces of wearing 4 The electric power supply cables must not show any damages or material fatigue The Showtec City Painter 2500 requires almost no maintenance Howeve
18. rviceable parts Refer servicing to qualified technicians only IMPORTANT Ihe manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorized modification To the device e Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Never remove warning or informative labels from the unit Never use anything to cover the ground contact Never run the device without lamp Never ignite the lamp if the objective lens or any housing cover is open as discharge lamps may expose and emit a high ultraviolet radiation which may cause burns Never lift the fixture by holding it at the projector head as the mechanics may be damaged Always hold the fixture at the transport handles Never look directly into the light source Never open the cover if the lamp is lit Never leave any cables lying around Do not insert objects into air vents Do not connect this device to a dimmerpack Do not switch the device on and off in short intervals as this would reduce the lamp s life If the lamp has been turned OFF let the lamp cool down for 15 minutes before turning the lamp ON again Do not touch the device s housing bare handed during its operation housing becomes very hot e shake the device Avoid brute force when installing or operating the device e Only use device indoor avoid cont
Download Pdf Manuals
Related Search