HDKVM ELR extension for HDMI and USB Over One - COMM-TEC
Contents
1. HDMI Type A 19 pin female locking Video Output Connector Receiver HDMI Type A 19 pin female locking USB Connector 1 Type B female USB Connector Receiver 3 Type A female Link Connector Sender Receive pp RJ 45 shielded Service Connector for field upgrades Sender Receiver USB mini B Power Supply Sender 5V DC Locking Power Consumption Sender 10 W max Operating Temperaturen i io adn esas linda 0 to 40 C Dimensions W x H Xx 8 5 x 1 75 x 4 5 216mm x 45mm x 114mm SHIPPING VUEIOLIL ee ee 6 lbs 2 7 kg 12 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of2. USB In Connect the USB source to this port using the supplied USB cable 5V DC Connect the included 5V DC locking power supply to this connector RECEIVER UNIT LAYOUT Front Back 10 RECEIVER UNIT DESCRIPTIONS Power Indicator This LED indicator will glow bright blue once the included 5V DC locking power supply has been properly connected to the unit and the AC power cord has been plugged into an available electrical outlet Link Indicator This LED indicator will flash bright blue on and off until the Sender and Receiver unit are connected using CAT 5e cable USB Indicator This LED will flash bright blue on and off until the Sender and Receiver unit are connected using a CAT 5e cable The USB source must be connected to the Sender unit Video Indicator This LED will flash bright blue on and off until the Sender and Receiver unit are connected using a CAT 5e cable The Hi Def source must be connected to the Sender unit Link Connects the Receiver to the Sender unit using a CAT 5e cable Locking Connector Used to lock the HDMI cable in place HDMI Out Connect an HDTV display to this HDMI port Service Mini USB service port used for upgrading the firmware USB Connects up to three USB devices i e mouse keyboard camera 5V DC Connect the included 5V DC locking power supply to this connector CONNECTING THE HDKVM ELR EXTENSION FOR HDMI AND USB OVER ONE CAT5 How to Connect the HDKVM ELR extensio
3. Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 EXT HDKVM ELR w gefen com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Write To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefen com support gefen com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice HDKVM ELR extension for HDMI and USB Over One CAT5 is a trademark of Gefen LLC 2013 Gefen LLC All rights reserved All trademarks are the property of their respective owners Rev Ad CONTENTS Introduction Operation Notes Features Sender Unit Layout Sender Unit Descriptions Receiver Unit Layout Receiver Unit Descriptions Connecting the HDKVM ELR extension for HDMI and USB Over One CAT5 Wiring Diagram DIP Switch Configuration Network Cable Wiring Diagram Rack Tray Installation Specifications Warranty INTRODUCTION Congratulations on your purchase of the Gefen HDKVM Extender for HDMI and USB over One CAT 5 Your complete satisfaction is very important to us Gefen Gefen delivers innovative progressive computer and electronics add on solutions that harness integration extension distribution and conversion technologies Gefen s reliable plug and play produc
4. all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 13 Rev Ad MA HDKVM ELR 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefen com support gefen com um O amp X C amp O This product uses UL listed
5. and display devices e Field upgradeable via mini USB port e Supports any Operating System e and HDBaseT technologies allow extension up to 330 feet 100 meters e Locking power supplies Rack mountable Package Includes HDKVM ELR extension for HDMI and USB Over One CAT5 Sender Unit HDKVM ELR extension for HDMI and USB Over One CAT5 Receiver Unit 6 ft Locking HDMI Cable M M 6 ft USB cable A B 5V DC Locking Power Supplies AC Power Cords Quick Start Guide SENDER UNIT LAYOUT Front Back 10 SENDER UNIT DESCRIPTIONS Power Indicator This LED indicator will glow bright blue once the included 5V DC locking power supply has been properly connected to the unit and the AC power cord has been plugged into an available electrical outlet Link Indicator This LED indicator will flash bright blue on and off until the Sender and Receiver unit are connected using CAT 5e cable USB Indicator This LED indicator will glow bright blue when a USB source is connected Video Indicator This LED will glow bright blue when the HDMI source is connected Link Connects the Sender to the Receiver unit using a CAT 5e cable Service Mini USB service port used for upgrading the firmware Locking Connector Used to lock the HDMI cable in place HDMI In Connect a Hi Def source to this port using the included locking HDMI cable Please see the Features section on page 3 for HDMI Features Supported
6. bottom of the Receiver unit the Sender unit does not contain any DIP switches Each DIP switch performs a different function Two DIP switches located on the bottom of the Receiver Unit DIP Switch 1 EDID Management e OFF Local EDID When Local EDID mode is used the EDID will be assembled by copying all video and audio features of the connected output device e ON default Pass Through EDID Allows all video and audio features of the connected devices to be passed to the source device By default the unit is shipped with DIP 1 in the ON position DIP Switch 2 FOR FUTURE USE NETWORK CABLE WIRING DIAGRAM Gefen recommends the TIA ElA 568 B wiring option Please adhere to the table below when field terminating cable for use with Gefen products Pin Color 2 Orange Blue White Brown White 12345678 Cat 5 Cat 5e and Cat 6 cabling comes in stranded and solid core types Gefen recommends using solid core cabling It is recommended to use one continuous run from one end to the other In some cases connecting through a patch might not work 10 RACK TRAY INSTALLATION Step 4 Turn unit upside down Step 2 Remove rubber feet Step 3 Line up holes on unit and rack tray Step 4 Install countersink screws Step 5 Ensure the unit is installed securely 11 SPECIFICATIONS ou LE 0 ee A ee 300 MHz Maximum TMDS 300 MHz Video Input Connector
7. n for HDMI and USB Over One CAT5 1 Using the included locking HDMI cable connect the computer Hi Def source to the HDMI In port on the Sender unit Connect another locking HDMI cable from the HDMI Out port on the Receiver unit to the HDTV dislay 2 Connect the included USB cable from the computer Hi Def source to the USB In port on the Sender unit 3 Upto three USB devices can be connected to the USB outputs on the Receiver unit 4 Connect a CAT 5e cable from the Link jack on the Sender unit to the Link jack on the Receiver unit up to 330 feet 100 meters away NOTE If terminating network cables the field please adhere to the TIA ElA568B specification see page 11 5 Connect the included DC locking power supplies to the Sender and Receiver unit and plug the AC power cords into available electrical outlets The Power LED s on both the Sender and Receiver units will turn on indicating that both units are powered 6 The Link LED indicators will flash until a link has been established ED CATS CABLE 4 HDMI CABLE USB m Receiver Hi Def Source with USB USB Mouse e Keyboard HD Display EXT HDKVM ELR N IMPORTANT This product cannot be disposed of in the general trash Please contact your solid waste local authority DIP SWITCH CONFIGURATION Receiver Unit The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 contains DIP switches on the
8. or CE compliant power supplies 46
9. t the included locking power supplies to the Sender and Receiver units and plug both power cords into available electrical outlets OPERATION NOTES PLEASE READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HDKVM ELR EXTENSION FOR HDMI AND USB OVER ONE CAT5 This product is AK x 2K compliant Cat 5 or Cat 6 cables should not exceed 330 feet 100 meters Shielded STP Cat 5 or Cat 6 is recommended However un shielded UTP Cat 5 or Cat 6 is acceptable eo NOTE The shielded cable has an advantage by providing immunity to Electromagnetic Interference EMI cell phones and A C motors The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 features the ability to generate compatible EDID and Hot Plug signals when working with different brands of source devices and monitors This product supports HDCP with HDMI and DVI sources Dual link resolutions are not supported FEATURES HDMI Features Supported e HDCP compliant e 12 bit Deep Color e LPCM 7 1 audio Dolby TrueHD Dolby Digital Plus and DTS HD Master Audio pass through e 3DTV pass through e pass through e Sync pass through Features e Extends HDMI and USB up to 330 feet 100 meters over one CAT 5 cable e Supports resolutions up to Ultra HD 4K x 2K 3840 x 2160 30Hz and 1080P Full HD e Supports up to 30 Mbps when using USB 2 0 e Backward compatible with USB 1 1 e EDID management for rapid integration of source
10. ts supplement cross platform computer systems professional audio video environments and HDTV systems of all sizes with hard working solutions that are easy to install and simple to operate The Gefen HDKVM ELR extension for HDMI and USB Over One CAT5 The HDKVM ELR extends HDMI KVM keyboard video and mouse and USB over a distance up to 330 feet 100 meters using one CAT 5e cable Hi Def resolutions up to Ultra HD 4Kx2K 3840 x 2160 30Hz 1080p Full HD and 1920 x 1200 and USB 2 0 are supported The Receiver unit connects to an HDTV display using HDMI and also allows the connection of up to three USB devices providing access to printers scanners cameras external storage media Digital Signage and automated control systems This product uses Gefen ELR Extra Long Range Technology based on HDBaseT allowing HDMI and USB signals to travel along the same CAT 5e cable reducing cabling costs in addition to providing easier and more reliable installation How lt Works Place the HDKVM ELR Sender unit next to the computer source and use the included locking HDMI cable to connect the computer to the Sender unit Use the supplied USB cable to connect the USB host source device to the USB port on the Sender unit Connect the Receiver unit to an HDTV display with another locking HDMI cable Connect the USB devices to the Receiver unit Use one CAT 5e cable up to 330 feet 100 meter to connect the Sender unit to the Receiver unit Connec
Download Pdf Manuals
Related Search