Manual (english)
Contents
1. install the device out of the lounge area of people IMPORTANT Overhead installation requires a high level of experience This includes knowledge of calculating the payload used installation material and safety inspections of the used material and the projector whereas the required experience is not limited to this Do not try to carry out installation yourself under any circumstances if you are not qualified Contact a professional installer An inappropriate installation can lead to injuries and or damaged properties It is not allowed to install the device in the grip area of people If the device may hang from the ceiling or from high beams the use of truss systems is mandatory The device may not be installed so it can swing freely in the room Please note Crashing down items can cause serious injuries Do not install the projector if you doubt the safety of a possible installation form Before installation make sure that the mounting surface has the ability to carry the tenfold point load of the own weight of the device Mount the device with the mounting bracket to your trussing system using an appropriate clamp During overhead installation the device must be always secured by a safety rope which is designed to hold the twelvefold weight of device Only safety ropes with quick release safety fastener elements may be used Hang up the safety rope in the hole of the mounting bracket Direct the rope over the 5 8 sinus truss o2. sinus Manual Speaker SL 5A 1pair SL 5A snus Table of contents Ve Sa itor ere p aa Perna rbd aba aa a na 1 1 For safe and efficient 2 Designated USE 2 1 Overhead n a a a EXTRA RR 3i 1 1 sa a ed sae 3 1 ProductoVerVIGW 5 _ ____ 4 5 Technical data me de rrt se i e Exi E rre ar ocn prc Da n rn RR 2 8 snus 1 Safety instructions e This deviceis suitable forindoor use not outdoors only e All modifications to the device will void the warranty e Repairs are to carry out by skilled personnel only Use only fuses of the same type and original parts as spare parts e Protect the unit from rain and humidity to avoid fire and electric shocks Make sure to unplug the power supply before opening the housing 1 1 For safe and efficient operation Be careful with heat and extreme temperature Avoid exposing it to direct rays of the sun or near a heating appliance Not put it in a temperature bellow 32 F 0 or exceeding 104 40 Keep away from humidity water and dust Do not place the set in a location with high humidity or lots of dust Containers with
3. cy Frequency response 20 Hz 20 kHz Sensitivity SPL max 89 dB Components Transducer MF 5 25 Transducer HF Technical data Capacity 30W Type 2 Way 5 Fullrange LS Hardware Dimensions L B H 175 x 180 x 244 mm per LS Weight 5 kg pair 7 8 snus Importer B amp K Braun GmbH Industriestra e 2 D 76307 Karlsbad www bkbraun com info bkbraun com f RoHS pe
4. h differs from usages which are described in this manual can cause damages of the device In that case the warranty expires Additional you should notice that every differed usage is related with dangers and can cause e g an electrical short fire electric shock or crash 4 8 snus 2 1 Overhead installation Danger of life You have to observe the regulations of C1 formerly VBG 70 and EN60598 2 17 Installations are to carry out by skilled personnel only The suspension devices have to be build and measured so they can withstand for an hour the tenfold of the payload without suffering a permanent detrimental deformation Basically installation has to be made by using a second separate suspension This can be e g a suitable net The second suspension must be designed and attached so no part of the installation can fall down in case of failure During construction reconstruction and deconstruction unnecessary stay in the range of moving areas on lightning bridges under elevated work stations or any other danger zones is forbidden The operator is obliged to following safety related and mechanical facilities Before the first start up or after critical changes before restarting it has to be checked by an expert Review the frame of the inspection test at least all four years by an expert Review by a qualified person at least once a year How to carry out the overhead installation In tidal fall you should
5. he device Make sure that the device is not exposed excessive heat humidity or dust at the place of installation Take care that no cables are lying around You would endanger your own safety and also the safety of a third party It is not allowed to operate or store the device in an environment in which spray water rain humidity or fog is expected Humidity or very high atmospheric humidity could reduce the isolation of the device and could cause deathly electric shocks If you use fog devices the device has not be exposed to a direct smoke jet There has to be a safety distance of at least 0 5m between this device and the fog machine Make sure that the saturation of the fog has to enable a visibility of at least 10m Operate the device not during thunderstorms Surge voltages could destroy the device Unplug the power supply during thunderstorms Surrounding objects or surfaces should not be in contact with the device Make familiar yourself with the functions of the device before start up People without the experience should not handle with the device The most cause of functional disorder is inappropriate handling Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust or a wet soft cloth for stubborn dirt For transport use the original packing or designated accessory to avoid damages during the transport For reasons of safety unauthorized changes are forbidden A usage of the device whic
6. r an appropriate fastening point Hang up the end in the fastening element and tie up the locking nut A safety rope once exposed to failing load or damaged may not be used furthermore The maximum drop exceed must not exceed 20cm A safety rope once exposed to failing load or damaged may not be used furthermore Adjust the desired inclination angle via the mounting bracket and tighten the screw 3 Introduction Thank you for buying the Speaker SL 5A 1pair It is a powerful device For a successful installation and operation please read this manual carefully 3 1 Product overview 1 VOLUME Volume control for both speakers 2 TREBLE 5 Raise or lower the trebles 3 BASS Raise or lower the bass 4 ON OFF Switch 5 INPUT To connect a signal source with chinch 6 OUTPUT To connect the passive speaker TBAS ouput 7 Power supply 6 8 snus 4 Control 1 Before you turning on the power switch please make sure the mixer is turned on and the input signal is turned to minimum Please turn the knob of VOLUME TREBLE and BASS to minimum 2 Powerthe unit on 3 During operation please make sure that the speakers always sound well When distortions can be heard either amplifier or speakers are overloaded Overloads can be quickly caused to damages of amplifier or speaker 4 After usage set VOLUME TREBLE and BASS controls to the left stop position then turn off power switch 5 Technical data Frequen
7. water should not be placed on the set To avoid placing on un stable location Select a level and stable location to avoid vibration Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust or a wet soft cloth for stubborn dirt If out of work contact sales agency immediately Any troubles arose remove the power plug soon and contact with an engineer for repairing do not open the cabinet by yourself it might result a danger of electric shock Take care with the power cable Never pull the power cable to remove the plug from the receptacle be sure to hold the plug When not using the device for an extended period of time be sure to disconnect the plug from the receptacle IMPORTANT Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems Make sure the electrical connection is carried out by qualified personnel All electrical and mechanical connections have to be carried out according to the European safety standards 3 8 snus 2 Designated use This device was developed for professional use on stages in discos theatres etc The device is only approved for a connection up to 230V 50 60 Hz AC voltage and only for indoor use Regular breaks during operation increase the lifetime of your device Avoid convulsions or any form of forceful impact during the installation or the start up of t
Download Pdf Manuals
Related Search