Home
        Wireless Music System
         Contents
1.       peachtree audio       User Manual             Congratulations       Congratulations on your Peachtree Audio deepblue purchase  We  recommend that you read this manually thoroughly so that you can  fully utilize this exciting product  Please keep it for your records     Package Content       e Main Unit x1 e Detachable power cord x1   e Remote control function e 3 5mm AUX IN cable x1  with battery type CR2025 e Instruction Manual x1   included  x1       e 3 5mm AUX IN jack to connect your MP3 player  e Bluetooth   enabled to wirelessly play your music  e Full function remote control    Safety Precaution       Read  keep and follow these instructions     Heed all warnings on the product and in the instruction manual   For your safety  read and follow this manual carefully to ensure  proper use of the product and avoid any danger or physical damage     e Place the unit on a flat surface and ventilated condition  The ventilation  should not be impeded by covering the ventilation openings with  items  such as newspapers  tablecloths  curtains  etc  to avoid  overheating and malfunction     No naked flame sources  such as lighted candles  should be placed  on the apparatus    Keep the appliance away from rain and any moisture  Do not  place the unit in moist and humid conditions  which could lead to  malfunction    When the unit is suddenly moved from a cold environment to a  warm one  if moisture forms inside it  it may not operate properly   To correct this problem wait abo
2.  If the pairing is unsuccessful  re pair your Bluetooth   device with the  player and repeat the above steps     Pairing your other Bluetooth   device    Previously Paired Devices    To restart the current connection from player for select the other  Bluetooth   device  press and hold the   3 Power   Pairing   Function    button on the top panel for 5 seconds or the  PAIRING  button on  the remote control for 2 seconds and repeat the above steps for  pairing your other Bluetooth       Phone Calls During Bluetooth  Connection  1  If you are using a smartphone as your source the audio playing will be    interrupted when there is an incoming call or when the user makes  a Call     2  The audio will continue to play where it stopped once the call is    finished     Playing Bluetooth   Music    1     Once your device and the player are linked you can start to play  Bluetooth   music through the player       Turn on the player and press the     Power   Pairing   Function      button on the top panel or the  Bluetooth    button on the remote  control to select the Bluetooth   mode  Blue light indicates for  Bluetooth   mode       Press the  Pil  button on the remote control to play your    Bluetooth   enable device    NOTE  Depending on the Bluetooth   device you are using  you may  need to manually go into media player mode on your device to control  all the functions       Press the    gt  gt I  button on the remote control to skip the next track     Press the  144  button on the 
3.  product or specified additional components or accessories  elsewhere defined to be used with the installation of the product  they  must be usedin order to ensure compliance with FCC regulation     This Class B digital apparatus complies with Canadian ICES 003     Peachtree Audio  2405 120th Avenue NE  Bellevue  WA 98005  704 391 9337  www peachtreeaudio com    Service  704 391 9337  FCC ID  VWPKW B25BT    The Bluetooth   word mark and logos are registered  trademarks owned by Bluetooth SIG  Inc   and any  use of such marks by Signal Path International is  under license  ooo  13    
4.  to the player    Trouble pairing  device  computer  with the player       SOLUTION    Ensure that the Power Switch of wall socket is  physically set to the ON position     Ensure that the AC plug is securely connected  to the player and proper wall outlet     Make sure you have the latest firmware for  your iPhone   iPad   iPod       Make sure your device is working properly     Check your device   s manual for details on  Bluetooth pairing and lin king     Make sure your device supports the A2DP  and AVRCP Bluetooth   profiles before  linking  pairing  The pl ayer defaults to the  last linked device  so a new device may  need to be linked by press and hold the        Power   Pairing   Function   button for  pairing other device     iPod    iPhone    and iPad   are trademarks of Apple Inc   registered in the U S  and other countries     11       Recycling    This product bears the selective sorting symbol for Waste electrical  and electronic equipment  WEEE   This means that this product must  be handled pursuant to European directive 2002 96 EC in order to  be recycled or dismantled to minimize its impact on the environment   User has the choice to give his product to a competent recycling  organization or to the retailer when he buys a new electrical or  electronic equipment    For further information  please contact your local or regional authorities   Net weight  6 3kg    WARRANTY   1 year parts and labor when used under normal  conditions   Product abuse is not covered 
5. gt  gt I Next   EN 18  VOL   Volume up    19  VOL   Volume down    REMOTE CONTROL BATTERY    r         1               el        F          1  Slide and hold the battery release tab in the direction of the arrow     2  Pull out the battery holder and remove the old battery   3  Replace with a new battery  CR2025    4  Insert the battery holder back into the remote control     Operation  To power the player ON   1  Plug AC cord into AC jack  and plug into a live AC wall outlet     2  Press the      Power   Pairing   Function  button on the top panel  or the     Power  button on the remote control to switch the  player to ON mode     3  Press and hold the     Power   Pairing   Function  button on the  top panel for 1 to 5 seconds or press the   lt 3 Power  button on the  remote control to switch the player to Standby mode     Note  To save power  the player will switch to economic standby mode  when the speaker is idle for 12 hours     Using Bluetooth    Function  Paring Your Device    Before your start    Your Bluetooth device  cellphon e  MP3 player  computer  etc    must support the A2DP Bluetooth    profile  Commonly known as  stereo audio profile  to work with the player  Many of the latest  mobile phones and PCs with built in Bluetooth   functionality will  support this profile  For accurate information about your product   please refer to your Bluetooth    device   s user manual for details on  the Bluetooth   profiles it supports and on how to set the device   s  Blueto
6. oth pairing  searching  setup mode     Pairing your Bluetooth    device with the player   1  Press and hold the     Power   Pairing   Function  button on the  top panel for 5 seconds or the  PAIRING  button on the remote  control for 2 seconds at ON mode until blue light flashes slowly to  begin pairing operation     Please Note  Maximum broadcast distance for Bluetooth in open  space is typically 33 feet  Walls and other obstructions may reduce  this distance significantly    LED Status     1 Flashing quickly   No device paired   1 Flashing Slowly   Device pairing      Steady ON   Device paired    Once the device is paired the blue light will turn off after 15  seconds    2  Activate Bluetooth   on your device according to the device   s user  manual to link to the player  Typically  Bluetooth   controls are  found on the device   s tools or settings menu  Turn on Bluetooth     connectivity and make you device    discoverable        3  Search the device name    Peachtree BT    on your Bluetooth   device  listed and select it as your audio speaker     4  Once paired with a device  the Blue light will stop flashing and  glow steadily  A beep sound will also indicate that the connection  is established     5  Pairing remains intact even when the player or the Bluetooth    device is powered off or is taken out of link range  The player will  auto link with the last linked device when that device is in range     Note  Connecting to a Bluetooth    device may take up to 5 minutes  
7. remote control to skip back to    the beginning of the track currently play  Press the button again  immediately to skip the previous track       Press the   gt II  button on the remote control again to pause play     Press again to resume it       Press the   fa  a    button on the top panel or   Pa     on    remote control to adjust the system volume     Note  Please remember to turn off Bluetooth   device manually     Line in connection   1  Connect a sound source with a Line or headphon e analogue output  to play through your player as below hookup diagram shown    2  Press the       Power   Pairing   Function  button on the top panel  or press the  AUX  button on the remote control to select the  AUX mode  Green light indicates AUX Mode also     3  Set your personal audio player computer to PLAY     Headphone socket    3 5mm jack cable ge   Er     included  E ZEF    rf  h                               e iPhone  iPad  iPod models   e MP3 players   e CD walkman players   e Tape walkman players   e Personal computers or laptops    Note  Due to the different audio sources  the input level may vary   at maximum volume output level  Therefore  if the unit randomly  stops playing the music or becomes distorted  move the volume level  to minimum and wait for a while  The user can try to move up the  volume level again and the unit will play at normal operation again      The green  aux  light will turn off after 15 seconds       Troubleshooting    PROBLEM    There is no power   
8. ructions as improper adjustment may result  in damage and will often require extensive work by a qualified  technician to restore the product to its normal operation    If the product has been dropped or damaged in any way     WARNINGS    Batteries are to be inserted with the correct polarity    Never use batteries that show signs of electrolyte leaks or cracking   Never dispose of used batteries in an open fire  risk of explosion   Keep batteries out of reach of children    Never short circuit battery terminals    Exhausted batteries are to be removed from the product   Remove batteries from the appliance before disposing of it at the  end of its service life  or during long periods of non use    Do not try to open the batteries    Batteries  battery pack or batteries installed  shall not be exposed  to excessive heat such as sunshine  fire or the like    Ensure the battery compartment panel is secure    Danger of explosion if battery is incorrectly replaced    Replace only with the same or equivalent type    Do not charge non rechargeable batteries     IMPORTANT    When replacing used batteries  please comply with applicable  regulation relating to their disposal    Please return them to a suitable collection facility for  environmentally friendly disposal     This Transmitter must be installed to provide a separation distance  of at least 20 cm from all persons     CAUTION    RISK OF  ELECTRIC SHOCK  DO NOT OPEN    The lightning flash WARNING  TO The exclamation 1  symbol 
9. under our warranty   Please contact Peachtree Audio at 704 391 9337 or email us at    service peachtreeaudio com with any questions    12    Additional Information       This equipment has been tested and found to comply with the limits for  a Class B digital device  pursuant to Part 15 of the FCC rules  These limits  are designed to provide reasonable protection against harmful interference  in a residential installation  This equipment generates  uses  and can  radiate radio frequency energy and  if not installed and used in  accordance with the instructions  may cause harmful interference to  radio communications  However  this is no guarantee that interference  will not occur in a particular installation     If this equipment does cause harmful interference to radio or television  reception  which can be determined by turning the equipment off and  on  the user is encouraged to try to correct the interference by one or  more of the following measures   e Reorient or relocate the receiving antenna   e Increase the separation between the equipment and the receiver   e Connect the equipment into an outlet on a circuit different from  that to which the receiver is connected   e Consult the dealer or an experienced radio TV technician for  additional suggestions     Any changes or modifications not expressly approved by the party  responsible for compliance could void the user   s authority to operate  the equipment  Where shielded interface cables have been provided  with the
10. ut one hour for the moisture to  evaporate    The apparatus shall not be exposed to dripping or splashing    no objects filled with liquids  such as vases  shall be placed on the  apparatus    Do not expose the unit under direct sunlight or nearby objects  that radiate heat to avoid damaging the unit    The apparatus should be used in moderate climate    The plug of the appliance shall remain readily operable    Do not pull on the connection cord  but rather on the plug  to  separate the appliance from the mains    The On Off button does not completely isolate the product from  the power supply  To disconnect the product from the mains  power supply  you must unplug the power cord    Pull out the mains plug if the appliance is not to be used over a  longer period of time    Disconnect the main plug during thunderstorms     Servicing   Do not attempt to service this product yourself as opening  or removing covers may expose you to dangerous voltage  Refer all  servicing to qualified service personnel     Damage Requiring Service   Unplug this product from the wall outlet  and refer servicing to qualified service personnel under the following  conditions     When the power supply cord or plug is damaged   If liquid has been spilled  or objects have fallen into the product   If the product has been exposed to rain or water     2    If the product does not operate normally by following the  operating instructions  Adjust only those controls that are covered  by the operating inst
11. within an REDUCE THE RISK OF   point within an 2  equilateral triangle is   ELECTRIC SHOCK DO   equilateral triangle    Installation and Maintenance       TOP PANEL       intended to alert the   NOT REMOVE COVER   is intended to a EHRE HE  user to the presence    OR BACK   NO USER   alert the user    of un insulated SERVICEABLE PARTS to the presence     dangerous voltage      INSIDE REFER of important  within the product   s   SERVICING TO operating and  enclosure that may   QUALIFIED SERVICE maintenance  be of sufficient PERSONNEL   servicing   magnitude to Instructions in  constitute a risk of the literature  electric shock to accompanying the REAR PANEL an  i E al  persons  appliance  Br          For indoor use only  Sr m ZE   2  This is CLASS II apparatus with double insulation  and no protective mE EAS  earth provided     Technical Specifications             1    Power Pairing   Function  e Power supply  AC 100 240V  50 60Hz 2   a  Volume down   ee  provided    er  1x CR2025  3  J   Volume up     Cutout power  240W max  4  AUX  Green    Bluetooth    Blue    Standby  Red  indicator  e Standby mode consumption  0 45W  gt   Remote sensor  e Bluetooth    effective distance  10 meters open air 6  AUXIN jack  e AUX IN jack  3 5mm 7  AC Socket  e Bluetooth version  V2 1  EDR    REMOTE CONTROL       8      Power   8 14 9  Bluetooth  switch  10   amp  Mute   j 15 11  I Previous   10 16 12  Bass    11 17 13  Bass    12 18 14  PAIRING  15  AUX switch       16  Pll Play Pause  17   
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Les services à la personne  BD BOX version 2.2 user`s manual – bd flex  Surebonder 9756 Installation Guide  Clarity C4210 Cordless Telephone User Manual    Copyright © All rights reserved. 
   Failed to retrieve file