EX-9512S One Port PoE Splitter User`s Manual
Contents
1. EX 95125 One Port PoE Splitter User s Manual FCC Warning This device has been tested and found to comply with limits for a Class A digital device pursuant to Part 2 and Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and radiates radio frequency energy and if not installed and used in accordance with the user s manual may cause interference in which case user will be required to correct the interference at his own expense NOTICE 1 The changes or modifications not expressively approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits CISPR A COMPLIANCE This device complies with EMC directive of the European Community and meets or exceeds the following technical standard EN 55022 Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment This device complies with CISPR Class A WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user many be required to take adequate measures Table of contents GRADIENT ae k vy umm ds sts vds s tst v emtmp v 4 INILOQAUCLION a2. TP STP Twisted pair STP gt 120 meters 393ft DC 5V 12V selectable 100Mbps 10Mbps Connect to IEEE 802 3af PSE port OPC to 45 C Operating 20 C to 90 C Storage 1096 to 9096 Non condensing FCC Class A CE Mark 102 mm x 74 mm x 22 mm L x W x H 240g Chapter 2 Package contents Before you start to install the Splitter please verify your package that contains the following items E One Splitter E One Power output cable E One User s Manual LI ES User s Manual Power Adapter Chapter 3 Installation I The TP input port Using this port to connect to the PSE port of PoE switch or Power injector Hub II The TP output port Using this port directly connect to the TP port of client device I e a soho switch wireless Ap Ill The Power output port Using the power jack cable to connect to the client device supply 5V 12V to the client device The LED indicators LED Color Status Description PSE Link PSE connected Chapter 4 Application Data Power In L1
3. ro 4 PrOQUCL FOAUUNCS isis ii cid 4 Technical Specifications airada 4 Ghapler 2 isaac ici ii 5 Package CONTENTS na aka 5 Chapter 3 5 Installation sims 5 The LED indicators Chapter 4 Application Chapter 1 Introduction The splitter is a Power Over Ethernet splitter it split the data and power from the cable come over PSE When the input port connects to PSE via Cat5 cable the splitter will pass through the data signal to its RJ 45 output port and also converter the 48V PoE power to DC5V 12V to the output power jack With this splitter a client device without PD feature also can enjoy the power from PSE device Product Features Technical Specifications 00000 O Standards Media support Distances support Output Power Data Transfer Rate LED indicators Temperature Humidity Certifications Dimensions Weight Complies with IEEE802 3u 10Base T 100Base TX IEEE 802 3af PoE Standards TP port support Auto MDIX amp Auto negotiation TP port up to 100 meters for shielded unshielded twisted pair cable Supports Full duplex amp Half duplex operation on TP base on Auto negotiation Supply power source of 5V or 12V selectable up to 19 2W peak Small dimension can easily install anywhere IEEE 802 3u 10Base T 100Base TX and IEEE 802 3af 10BASE T EIA TIA 568 Cat3 4 5 5e or 6 UTP STP 100Base TX EIA TIA 568 Cat5 5e or 6 U
Download Pdf Manuals
Related Search