Night Vision Wristwatch HD Camcorder 1080P IR
Contents
1. 6 twice blue light is on solid Note in standby mode if you do not use the camera for 2 minutes it ll shut off automatically D Voice Recording In standby mode blue light is on solid press Button 6 2 times both red and blue light are on solid at the same time it is in voice recording mode Press the Button 2 once the blue and red light will flash at the same time it is now doing voice recording To stop voice recording simply press Button 2 once again both red and blue light is on solid Press Button 6 once again to go back to standby mode blue light is on solid E Play Video Turn off the camera Connect the USB cable to the watch first and then connect it to your PC through the USB cable and open the watch video folder in your computer Right click on the video file to choose media player or simply click on the video file to play video directly You can play video with Windows media player or VLC media player if you have that software in your computer Note due to the high resolution video in order to play the video faster and have better video quality you can copy video files to your PC first and then click on video file in your PC to play Note if your PC does not pop up with the removable folder you can find it from your My Computer folder in your PC F Web Camera The package includes a CD software camera driver Please install the PC camera diver in your computer first When the camera is in stand2. hole in the center of knob Please use this knob when you are doing recording with sound 3 MIC2 is the extra knob included in the package It does not have the small hole in the center but it has a rubber ring inside the knob It is recommended to use this knob when you are working in very humid environment But it will not have sound when you are doing video recording 1 MIC Knob 3 Waterproof with sound Mic knob hole 4 waterproof 2 Sound transmission hole sealing pad 2 Operation Guideline A On Off amp Record Video Press and Hold the Button 2 for about 2 seconds to turn on the power the blue and red indicator light will be on at the same time the device is initiating In about 1 second red light is off and the blue light flashes several times and off the watch is now doing video recording automatically Note both red and blue light are off during recording To get better video quality please do not move and shake the watch or hand during recording During recording you can press the Button 6 once to check the mode status After you press the Button 6 once if the blue light flashes it means that the camera is recording normally To stop recording simply press the Button 2 2 times the blue light is on solid it is now in standby status Note do not press the button 2 2 times too quickly you need to press it once and after seeing the blue light is on then press second time To do recording again simply pre
3. on watch will be on solid When the battery is fully charged red light will be off only blue light stays on solid NOTE please always connect the cable to watch first before you connect it to PC or power outlet Note The rechargeable battery is only for the camera The timepiece itself is using an individual cell battery model SR626 like other quartz watches The cell battery is located inside the movement under the rechargeable battery When the cell battery is out of power please bring your watch to local watch stores to replace the cell battery H Setting Time This camera watch can do recording with real time and date 1 Connect the watch to your computer through the USB cable 2 Open WordPad program in your computer Usually under Programs Accessories 3 Create a txt file named time txt and save it in the root of the removable disk the watch folder In the txt file enter year month day hour minute second with the following format 2013 12 30 12 09 25 Note follow the time from your watch There is one space between 30 and 12 Note save the time txt file in the root line up with the REC folder Do NOT save it inside the REC folder 4 Save the above date and time in the time txt file 5 Disconnect the watch from your computer and wait for about 5 seconds and then turn on your watch camera It is now ready to do recording with real time and date I Reset If there is malfunction on the camera press the
4. Button 2 and Button 6 together for resetting J U Disk Mode e Step 1 Do NOT turn on the camera on watch Simply connecting the watch to computer through the USB cable Wait for a while for the device to be initiated e Step 2 If the USB device cannot be recognized by your computer try to unplug the USB cable from both watch and PC and start it all over again from step 1 e Step 3 When your computer shows up with message box for you to open the U disk folder click on it to open the folder If your computer does not show up the message box you can click on My Computer icon on your PC and click on the Removable Drive icon to open the watch camera folder K Troubleshooting When the memory is full the red light and blue light flashes alternately for about 5 seconds and then it shut off automatically after saving existing file If you want to continue recording you need to delete some files in order to leave enough memory for continuous recording When the battery power is too low the red light flashes quickly and then shut off automatically after saving the existing file You need to do recharging If the video recorder stops responding due to improper operation or other reasons press the Button 2 and Button 6 together for resetting 3 Specifications Item Specifications Video format AVI Video encoding M JPEG Video resolution 1920 1080 Continuous recording time About 50 minutes after fully charg
5. anty from manufacturer only for original purchaser against manufacturing or workmanship defect under normal use Due to the hygiene or rehabilitation nature of this product it is non returnable Lenzburg is a trademark of QLM all rights reserved www ideatomorrow com
6. by mode or working mode connect the watch to computer with USB cable You will find the Standard Camera icon in your PC s My Computer folder You are now ready to use this camera as your web camera Note please ask your computer administrator if you need help for installing the CD e Step 1 install the camera driver to your computer Note driver software comes with CD You can find the driver installation instruction inside the CD e Step 2 turn on the camera function on watch Wait for couple seconds for the device to be initiated The camera should be under either recording mode or standby mode Note you must turn on the camera function first If not it ll go to U Disk mode instead of web camera mode e Step 3 connect the watch to computer through the USB cable After couple seconds your PC will show up a frame with Image Download Utility Just click on EXIT icon no need to do anything NOTE If your USB device cannot be recognized by your PC your PC will not show up the frame with Image Download Utility in this case please unplug the USB cable from both watch and PC and start it all over again from step 1 e Step 4 click on My Computer icon on your PC click on the Standard Camera icon to use web camera function G Charging the Battery You can do charging with your PC through the USB cable you can also do charging by using the AC charger connected to the USB cable During charging both red and blue light
7. ed 80 minutes w o using IR 10 15 minutes Enclosed software of the operating system or Mainstream audio and video media player recommend KMPlayer 4032 3024 JPG USB2 0 1GB capacity Media playing software Picture resolution format USB type Supporting system Windows me 2000 xp 2003 vista Win 7 5 Mac os 10 4 Linux DC 5V Mini 4 Pin USB Built in flash memory high capacity lithium battery model 337 SR416SW charge pressure Interface type Storage support Battery type 4 Maintenance Battery If the watch is not in use for a long time please have it fully charged before using For safety do not put this watch too close to fireplace or overheated spot Operating temperature 0 40 C For the extension of battery life it is better to use it in room temperature Operating humidity 20 80 This product does not have water resistance function only waterproof when MIC2 is used So it can not work in the very humid environment or under water Lens Do not expose the camera lens directly to strong light such as sun light so as to avoid damage to optical devices Cleaning Always use dry cloth to clean up the glass before doing recording The watch has a transparent cover on the glass for protection please remove it before using the camera NOTE Please follow the State s law Do not use this product illegally Limited Warranty Please contact seller for warranty Limited warr
8. lenzburg Night Vision Wristwatch HD Camcorder 1080P IR USER MANUAL KC314N 1 Overview Indicator light Operation button power On Off Video Recording Photo Taking Voice Recording Time adjustment Microphone outlet for voice recording Camera lens Mode Switching button USB port Reset press the button 2 and button 6 together for resetting O NO OI R WD NOTE most of time you only need to use button 2 and button 6 Only press it do NOT try to pull or rotate Button 2 and 6 Important statement This watch is made with waterproof feature with 30 meters deep in accordance to the technology and structure of the 3 degrees waterproof standard for timepiece The waterproof design is to avoid very small amount of water or liquid being sprayed over the watch Because of the camera function it does not mean that you can wear this watch while you are diving or trying to use camera under water If you are working in the very humid environment it is recommended that you replace the microphone knob MIC1 4 with the extra knob MIC2 included in the package Please refer to the picture of the knob instructions before you use them wT ANN A MIC1 B MIC2 C USB 1 MIC1 and MIC2 are microphone knobs The height of USB knob is a little bit higher than MIC1 and MIC2 Please make sure you do not switch microphone knobs with USB knob by mistake 2 MIC1 is preset on watch as default It has a small
9. ss the Button 2 once again the blue light is off and it is doing recording Note in standby mode if you do not use the camera for 2 minutes the power will shut off automatically To completely turn off the camera function press and hold the Button 2 for about 2 seconds red light flashes several times and off Note Make sure there is enough light and good sound effect in the area where you do recording do not block the microphone hole B IR Infrared LED On Off you can turn on the IR light when you are doing recording in darker area When the camera is in recording or in standby status press and hold the Button 6 for about 2 seconds until the red light flashes 3 times the IR LED light is on now To turn off the IR light press and hold the Button 6 for about 2 seconds and the IR light is off the camera is now doing recording without IR light NOTE For IR function the distance between lens and subject must be within 0 5 meter but no more than 1 meter If not the image or video will be dark IR light is not the indicator light You cannot see the IR light from watch face C Taking photos when the camera is in the standby status blue light is on solid press Button 6 once the red light will be on solid it is now in photo taking mode Press the Button 2 once to take one photo red light flashes once press Button 2 second time to take second photo and so on To go back to standby status press the Button
Download Pdf Manuals
Related Search