Home

User Guide

1. Status Yall Indicates signal strength ranging from a strong signal four lines to an extremely weak signal one line Call in progress No service available If service is unavailable the phone sounds a beep when you try to make a call Roaming service is established outside the home area Home service is established inside the home area Notification of a text message not available in all markets iS piel ALN Notification of a voice mail message Va MA Battery charge Ranges from four vertical bars full charge to one bar minimal charge to no bars and blinking no charge nj Ringer volume indicator Ringer silenced Phone Basics Indicates that encryption is turned on JV Designates the menu option currently selected AY A Indicates that you can scroll between screens using the volume buttons located on the side of the phone or the and keys a Indicates that either the selected text message is locked or the keypad is locked R Indicates that the text message is unlocked Antenna Phone performance depends on the strength of the signal it receives As you fully extend and rotate the antenna the signal strength indicator shows the strength of the signal received in that particular antenna position You cannot make a satellite call with the antenna stored It is importan
2. 1 Sounds 1 2 3 m4 m5 m 7 2 Display 1 2 m 3 m 4 5 6 lt 7 8 3 Alerts 1 2 lt 3 4 4 Calling 1 2 3 4 Preferences Menu Ringer Type Ringer Volume Earpiece Volume Key Beep Sound Key Beep Volume Key Beep Length Mute Stereo Backlight Sort Book Banner Auto Hyphens Show Time Time Zone Language Display Color Fade Minute Service change New Message Auto Answer Auto Redial One Touch Dial Auto Key Answer This section provides information on how to set up the following phone preferences m Sounds m Display m Alerts m Calling 59 Preferences Menu Sounds To set up your personal sound preferences changes can be made to the following functions Ringer type Ringer volume Earpiece volume Key beep sound Key beep volume Key beep length Mute stereo Ringer Type For incoming calls the ringer can be changed to one of eight different rings or melodies To set the incoming calls ringer type From standby mode press menu Press Preferences Press _ Sounds Press _ Ringer Type Press Cy or to select the ringer type or melody from the list Press 7 ok Ringer Volume From standby mode to change the ringer volume choose one of the following ant kt WN amp m Press the volume buttons on the side of the phone Press gt menu a Press Preferences a Press _ Sounds Q Press Ringer Vol
3. To exit this screen press 7 ok 41 Messages Menu When the phone is out of memory the oldest unlocked messages are automatically deleted as necessary to receive new messages E wp Lock messages to prevent messages from being deleted However if all messages are locked when a new message is received and the phone is out of memory the new message is lost The network may try to deliver it later To avoid running out of memory m Erase locked or unlocked messages that you no longer need When the phone is out of memory and all text messages are locked it no longer accepts new messages and this message displays Yall Message Lost Insufficient Memory m To exit this screen press P ok wV Note The network may try to deliver lost messages later Locking and unlocking text messages The Lock feature prevents messages from being automatically deleted if the phone is out of memory Text messages can be manually erased even if locked To lock or unlock text messages 1 Press and hold e 2 Press gt text The newest text message displays 42 Messages Menu To display more detail if available press 7 view The text automatically scrolls on the screen and pauses so that you can read it To manually scroll press a scroll key Scroll to the bottom of the message and press 7 options Press for Lock or for Unlock The lock indicator f or the unlock indicator displays to the left of the
4. 60 Preferences Menu a Press 67 to increase or to decrease the volume Q To turn off the ringer press until the word Silent appears Q Toremind you that the ringer is off the Ringer Silenced icon X displays a Press 7 ok To silence the ringer when receiving a call m Press 3 Earpiece Volume The earpiece volume is adjustable while on a call or from standby mode To adjust the earpiece volume while on a call m Press the volume buttons on the side of the phone To adjust the earpiece volume while in standby mode Press P menu Press Preferences Press _ Sounds Press Earpiece Vol Press 4 to increase or to decrease the volume Press C ok Key Beep Sound The sound you hear when pressing the keys key beep can be adjusted to either a tone or a click anak ON amp To adjust the key beep sound 1 From standby mode press 7 menu 2 Press Preferences 3 Press Z Sounds 4 Press KeyBeepSound 61 Preferences Menu 5 Press G or to select tone A tone sounds 6 Press G or again to select click A click sounds A Note While on a call if you select click keys pressed for voice mail sound as tones Other keys pressed in menus sound as clicks 7 Press ok Key Beep Volume The volume of the sound you hear when pressing the keys key beep can be adjusted To adjust the key beep volume From standby mode pres
5. Duration Save View View the entire number Send Make a call to the number Send Tones Send DTMF tones while on a call See Sending tones page 30 Prepend Add numbers such as an area code or country code at the beginning of the phone number and save it in your phone book 36 Messages Menu 3 Messages This section provides information about Inbound SMS short message service text and voice mail messages m Message alerts m Reading messages m Voice messages m Text messages Contact your service provider for information regarding the availability of text and voice mail notifications Message alerts The phone can be configured for message alerts see New Message page 72 When the phone is turned on and an SMS message is received the phone alerts you by m Flashing an indicator light Sounding a beep m Displaying the text message indicator M or voice mail notification indicator on the screen The text message and voice mail notification indicators display until all messages are read Reading messages When you read a message new messages are accessed first If the message contains a call back number matching one in your phone book the corresponding name displays in place of the number If more than one name matches a call back number the entry with the lowest phone book location number displays 37 Messages Menu Voice messages Accessing voice mail messages I
6. menu Press Security Enter your lock code Press Erase Book Press 7 ok a To erase all entries in the phone book press _ ok Q To return to the menu without erasing the list press Security Menu Erasing SMS messages This feature erases all SMS short message service messages including all locked or unlocked text messages and all voice mail notification messages Use this erase feature to avoid running out of memory see To avoid running out of memory page 42 1 From standby mode press menu Press Security Enter your lock code Press Erase SMS short message service Press ok a To erase all messages press _ ok a To return to the menu without erasing any messages press a VN Resetting preferences This feature resets all preferences to the original settings defaults entered by your service provider These preferences include those described in Preferences Menu page 59 with these exceptions The banner is not reset m The Service Provider Preferred and Prohibited Lists are deleted see Service Provider Select page 79 m The lock code is not reset m The phone book call history or SMS messages are not erased To reset preferences 1 From standby mode press 7 menu Press Security enter your lock code Press Reset Prefs Press F ok When prompted to reset all preferences press C ok aA VN 57 Security Menu 58 7 Preferences
7. SPOT Global Phone User Manual This guide is based on the production version of the SPOT Global Phone Software changes may have occurred after this printing SPOT reserves the right to make changes in technical and product specifications without prior notice SPOT LLC 300 Holiday Square Blvd Covington LA 70433 Copyright 2013 SPOT LLC All rights reserved This technology was exported from the United States Government Diversion contrary to U S law prohibited Digital by QUALCOMMg is a registered trademark of QUALCOMM Incorporated All trademarks and registered trademarks are properties of their respective owners Contents Getting Started ccccscccssscccssssscscssccssssccssssscssssssssssssssssscssssssssssssssessseee L Understanding this guide Preparing to make calls ccccccccssssccsscceseeeceseeeesseeeeeseeeseseeeseseeeee Making voice calls Making Data Calls Receiving Calle iiss ccctec tech at jee a eiaees E N eS ENE S KN ISNS Ending calls senie oeae ara a a a rie aria Displaying your phone number Solving problems esee Contacting customer service Phone Basics csscccsescsesssseeeseoes Phone features and keypad _ Display indicators licccutsvexsasisete sestnateketenscdsteadrsesdesthidavaevethevvnateee teasers Antenna ee er E E a E E E Soevgeuteceucagseneeetes Calling Basics seessesessesssssssscsssoe Turning the phone on and off Standby mode vs esc
8. Cer or ce Territory This feature displays the current Globalstar service provider s MCC mobile country code and MNC mobile network code To display the territory information 1 From standby mode press 7 menu 2 Press System 3 Press Territory 4 Press Cer or ce My Number This feature displays your phone number and service provider name To display your phone number 1 From standby mode press 7 menu 2 Press My Number 84 Battery Care and Maintenance This section contains information about the care and maintenance of the phone batteries Battery care and charging Battery chargers m Low battery Battery removal Battery replacement Battery A rechargeable battery is located on the back of the phone The following is typical battery performance Service Mode Talk Time Standby Time Globalstar Satellite 4 hours 36 hours 85 Battery Care and Maintenance Battery care and charging The battery charge level indicator is shown at the top right of the screen and ranges between four vertical bars full charge to one bar minimal charge If the indicator has no bars the battery has no charge VAM A l A Fully charge the battery immediately after purchasing the phone to maximize the talk and standby times The battery does not need to be completely drained before you recharge it See Low battery page 87 for more information Follow t
9. Last Call Home Calls Roam Calls Recent Calls Data Calls All Calls 0 0 0 Resetting call counters Security Menu e seessseessocsssooesocessosessosesoee Lock code Locking the phone Restricting the phone Entering priority numbers Erasing call history list eee Erasing phone book entries 4 Erasing SMS messages cceseeeee Resetting preferences sisese i neee e aona r EEOAE SEI a Contents Preferences Menu sscccccssssssscsccssssssccsssscssccsssssssccssssssssccssssssssseessssss OD Calling ceia ncheetetid tart Todas vetesdeu testbed t oss aae a E a RRS 72 Status Find Home Vers era E A E vases ease oe vee ee eA Sus Aba a Res Service Provider Select Service Provider Territory ceeeeeeee My Number ccccceessseeeseees Battery chargers Low battery 02 03 0 0 ainsi hance i ir e nieces Battery removal EAE A E A EEES Battery replacement Safety Information FOCHO NOCE neS e a E E E T ESNA Exposure to radio frequency signals Body worn operation Antenna care sses Phone operation Driving senrt ansea Electroni devices nnee ier ea i ein AIP CAR Ge a a a de uh fol E A ONTT Blasting AVCAS scenariene eira ian Potentially explosive atmospheres 066 For vehicles equipped with an air bag Battery cAr enyn ierre E R E ES Other safety i
10. SMART KEY options 43 Messages Menu 44 Features Menu 4 Features 1 Keyguard 2 Scratchpad 3 Current Position Coordinates This section provides information on how to use the following features m Key Guard m Scratchpad m Current position coordinates Key Guard The key guard locks the phone keys to prevent accidental use If you receive an incoming call when the key guard is on answer the call by pressing Ka Note The key beeps are silenced when the keyguard is set to on To turn the key guard on m Press and hold the Gh key To turn the key guard off m Press the following keys in sequence 7_ A Note Lock your phone to prevent unauthorized use see Locking the phone page 54 45 Features Menu Scratchpad This feature provides a shortcut to storing information Enter numbers on the scratchpad to m Add to call history m Save to the phone book Send tones over the air for automated phone services such as voice mail or banking online A Note To add to call history or save to your phone book you can be on a call or in standby mode To send tones you must be on a call To access the scratchpad From standby mode press F menu Press Features Press Scratchpad Enter numbers Press G_ options Choose one of the following options a AddToHist press GC the number is added to call history Save to your phone book press see Saving entries pag
11. To display the lowercase e press five 5 times 3 Complete the text entry using to enter a space between words 4 After all characters are displayed press ok To edit letters and other characters 1 Position the cursor on the character to be edited by choosing one of the following options m Press Gt or 5 Press one of the volume buttons on the side of the phone 2 From the keypad enter a new character To delete letters and other characters m To delete one character at a time Q Position the cursor over a character a Press Cer to delete m To delete the entire entry press and hold Cer To enter a space between words m To enter a space choose one of the following options a Press Q Press the down volume button on the side of the phone To enter punctuation or spaces m To enter special characters press 7_ repeatedly m The punctuation or space displays in the following order lt space gt amp 1 24 Phone Book Menu E wp To move backward between screens press _cir_ Entering pauses When using automated phone services such as voice mail or online banking adding a pause when entering a series of numbers allows a segment of time to be included in the string of characters Each pause counts as one character This pause allows one remote electronic process to complete before another starts Pauses can be entered manually or saved in a phone book entry Ther
12. a Note You cannot add or delete your home service provider from any list Viewing lists To view the Known Preferred or Prohibited Lists 1 2 3 4 6 From standby mode press menu Press System Press SP service provider Select To select a list to view a Press 7_ Known List Q Press Prefr List Q Press Prohb List Press view to display the service provider s MCC mobile country code and MNC mobile network code m Ifthe service provider is on the Preferred List the preferred location number displays Pref Loc m If the service provider is on the Prohibited List yes displays Prohib m Ifthe service provider is on both the Preferred and the Prohibited Lists the preferred location number and yes displays Press P ok Adding to lists To add to the Preferred or Prohibited Lists 1 2 3 4 From standby mode press menu Press System Press SP service provider Select Press 7_ Known List 81 System Menu oon Scroll to select a service provider see Navigating and using menus page 21 Press amp edit Press _ Preferred or Prohibited Press ok Re register your phone see Phone Registering page 79 Editing lists To edit reorder or delete from the Preferred List ISTRY E 82 From standby mode press P menu Press System Press SP service provider Select Press Prefr List Scroll to select a servi
13. already installed turn the power off to prevent losing data and then remove the battery see Battery removal page 88 2 On the new replacement battery locate the three tabs shown below 3 Align the tabs to the slots in the battery cavity of the phone 4 Insert the battery into place 89 Battery Care and Maintenance 5 Align the tabs of the battery cover with the slots on the battery cavity 6 Press down on the battery lid to snap it securely into place Safely dispose of the old battery as described in Battery care page 97 90 Safety Information This section contains the following safety information for wireless handheld phones FCC IC notice Exposure to radio frequency signals Body worn operation Antenna care Phone operation Driving Electronic devices Aircraft Blasting area Potentially explosive atmosphere For vehicles equipped with an air bag Battery care Other safety issues FCC IC notice This device complies with part 15 of the Federal Communications Commissions FCC rules Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation To comply with FCC radiation exposure requirements use of this device for body worn operational configurations is limited to accessories tested and approved by Globalstar Other accessor
14. code supplied by your service provider 0000 If you forget your lock code contact your service provider Entering a new lock code If it becomes necessary to change the lock code create a new 4 digit code 53 Security Menu To enter the new lock code From standby mode press P menu Press Security Enter the current lock code Press New Code Enter your new 4 digit lock code Press 7 save The phone displays confirmation of the new code entry on wh ee Locking the phone The phone can be locked to prohibit any outgoing calls except priority and emergency numbers Incoming calls are not affected No shortcuts are available for dialing emergency or priority numbers m All other functions are locked E wp To unlock the phone enter the lock code used to access the Security menu To lock the phone 1 From standby mode press 7 menu Press Security Enter your lock code Press 7_ Lock Phone Scroll to select one of these options a kw bh m Never The phone cannot be locked Now Immediately locks the phone for one time only m On Power Up Locks the phone every time you turn the phone on 54 Security Menu To unlock the phone 1 Press 7 unlock 2 To return to the main menu enter your lock code Enter the same lock code used to access the Security menu If you forget your lock code contact your service provider Restricting the phone Restricting the phone lim
15. seconds and then reinsert the plug m Check the battery temperature Ifit is too warm allow it to cool before recharging it m Replace the battery if it is several years old 101 Troubleshooting Problem Solution Battery draining quickly Check that your antenna is pointing straight up and has a clear view of the sky to conserve battery life Set the backlight option to off see Backlight page 64 Replace the battery if it is several years old Check the battery temperature If temperatures are too warm or too cold battery life is decreased Making calls 102 Rotate and fully extend the antenna Ensure that the antenna has a clear view of the sky Check the signal strength indicator If Calling is Restricted displays check the Restrict Phone setting under the Security menu see Restricting the phone page 55 Remove all service providers from the Prohibited List see Erasing a Provider from the Prohibited List page 83 Troubleshooting Problem Solution Receiving calls m Check that the phone is turned on m Check that the ringer is loud enough Rotate and fully extend the antenna Ensure that the antenna has a clear view of the sky m Check the signal strength indicator Remove all service providers from the Prohibited List see Erasing a Provider from the Prohibited List page 83 Losing calls m Ensure that your antenna is pointing straight up when pl
16. start again pressc 3 To place the call to this number press To edit numbers 1 Press G book 2 To scroll through the phone book press one of the volume buttons located on the side of the phone 3 When the cursor is flashing over the entry to be edited press 7 view 15 Calling Basics Press options Press 1 to edit Press to edit the number Use the keypad to edit the numbers x Tip The Cer button can be used to delete a digit or character A Note You cannot use Cy or to move the cursor when entering or editing numbers because these keys are used to enter or SS pt e To delete numbers Press Cer to delete one previous character at a time m Press one of the volume buttons to position the cursor over a digit or character then press Cer to delete m Press and hold Cer to delete the entire entry Making emergency calls m When making emergency calls no special conditions apply m Locking or restricting the phone does not prevent making calls to emergency numbers To make an emergency call 1 Enter the emergency number 911 2 Press 3 Calls routed to third party emergency service provider Calling Basics Redialing a call To redial a recent call 1 Press 2 Select the phone number from the list 3 Press Muting a call While on a call the microphone can be muted so that the person on the other end cannot hear you To turn mute on m Pres
17. 52 current position coordinates 46 D data cable PC 100 data calls 51 deleting letters 24 numbers 16 displaying phone number 6 driving safety 94 DTMF tones 30 31 36 E earpiece volume 61 in standby mode 61 on a call 61 editing banner 65 letters 24 numbers 15 phone book entries 28 electronic devices 95 emergency calls 16 encryption on indicator 11 end key 22 ending calls 6 entering hyphens 66 67 letters 23 numbers 15 Index 2 pauses 25 priority numbers 55 punctuation 24 spaces 24 erasing all phone book entries 56 all SMS messages 57 call history list 56 phone book entries 29 F fade alert 71 features menu 45 key guard 45 scratchpad 46 finding phone book entries 27 force service provider selection 83 H hands free operation 100 hard pauses 25 hearing aids 95 home calls 50 home indicator 10 hyphens entering automatically 66 entering manually 66 67 l indicator battery charge 10 call in progress 10 encryption on 11 home 10 light 8 locked message 11 menu selection 11 no service 10 ringer silenced 10 ringer volume 10 roaming 10 scroll arrows 11 signal strength 10 text message 10 unlocked message 11 voice message 10 Installation Kit 100 international dialing 17 K key beep length 62 sound 61 volume 62 key guard 45 key presses 2 keypad 8 known list 80 81 L language 70 setting 70 last call 49 lists known 80 preferred 80 prohibited 80 lock code about 53 lock
18. CC and can be found under the Display Grant section fec gov oet fecid after searching on FCC ID J9CGSK2UT More information on SAR can be found on the Cellular Telecommunications and Internet Association CTIA web site wow com com Tests were also performed as required by the EU for each model The highest SAR value for this model phone when used at the ear is 0 013 mW g and when worn on the body is 0 345 mW g at 15 mm separation distance The SAR limit for the EU is set at 2 0 mW g averaged over ten gram volume limit Body worn operation Your telephone was tested for typical body worn operations with the back of the phone being kept 15 mm from the body To comply with FCC RF exposure requirements a minimum separation of 15 mm must be maintained between your body and the back of the phone including the antenna Third party belt clips and similar accessories containing metallic components should not be used with your phone Body worn accessories that cannot maintain a 15 mm separation distance between your body and the back of the phone and that have not been tested for typical body worn operations may not comply with FCC RF exposure limits and should be avoided 93 Safety Information Antenna care Use only the supplied or an approved replacement antenna Unauthorized antennas modifications or attachments could damage the phone and may violate FCC regulations Phone operation Hold the phone as you would any other tele
19. Key Answer Preferences Menu Auto Answer Use this feature to adjust the number of times the phone rings before it automatically answers a call When this auto answer feature is used the phone s ringer option is automatically set to Standard To set auto answer 1 From standby mode press 7 menu Press Preferences Press Calling Press C AutoAnswer Press 61 or to select one of the following options Off Phone does not automatically answer a kw bY m After 1 ring Phone automatically answers after 1 ring m After 2 rings Phone automatically answers after 2 rings m Car kit only 1 ring When installed in the kit the phone automatically answers after 1 ring m Car kit only 2 rings When installed in the kit the phone automatically answers after 2 rings 6 Press C7 ok a Note If you select an option other than off the message Auto Answer flashes while in standby mode Auto Redial Use this feature to set the time interval in which the phone automatically redials a number when the network is busy or unavailable but not when the phone is busy While the phone is in standby mode the phone automatically redials at intervals until the call connects or you press If you change service auto redial stops 73 Preferences Menu To set auto redial From standby mode press P menu Press Preferences Press Calling Press Z Auto Redial Press or to select one of the f
20. aced next to your head and when using the keypad or viewing the screen Ensure that the antenna has a clear view of the sky Rotate and fully extend the antenna m Check the signal strength indicator Remembering your lock code m Contact your service provider for the lock code for the Security menu or phone lock feature 103 Troubleshooting 104 A AC wall charger 99 accessories 99 air bag safety 97 alerts 70 fade 71 minute 71 new message 72 service change 71 72 all calls 51 answering calls 5 antenna 2 3 safety 94 any key answer 74 75 auto answer 73 auto hyphens 66 pauses 25 auto redial 73 74 B backlight settings 64 banner 65 battery charge indicator 10 86 chargers 87 charging 86 decrease life 65 guidelines 86 increase life 64 low charge 87 removal 88 replacement 89 turning off low charge alert 88 Index typical performance 85 call history accessing 34 call a number 36 call types 33 date time 35 duration 36 erasing 56 prepend numbers 36 save number 36 view number 36 viewing details 35 call in progress indicator 10 call info menu 49 all calls 51 home calls 50 last call 49 recent calls 50 roam calls 50 call waiting 18 caller ID 18 calls emergency 16 making calls 4 preparing for 2 redialing 17 car power adapter 99 charger wall 99 charging battery 86 87 Index 1 Index clear key 22 defined 9 color scheme 70 setting 70 counter resetting 51 52 undo resetting
21. ada IC can require you to stop using the phone if such interference cannot be eliminated If you need assistance contact your service provider vil viii Getting Started Congratulations on purchasing your SPOT Global Phone Your phone comes with the following m Phone m Battery m Charger m Quick Reference Guide It is very important that you read this section because your SPOT satellite phone is unique This section provides information on the following basic concepts Understanding this guide Preparing to make calls Making voice calls Making data calls Receiving calls Ending calls Displaying your phone number Solving problems Contacting customer service For more detailed information on usage refer to the other sections in this guide If you need further assistance see Solving problems page 6 Getting Started Understanding this guide These conventions or representations are used in this guide Type of Action Example Action Key Presses Press Press key briefly Press and hold o Press key for more than one second Using SMART Press menu Press the SMART KEY P KEY options under the appropriate option on the screen Scrolling Scroll to select Press either of the volume yes or no Preparing to make calls buttons on the side of the phone or the 7 and keys m Charge and properly install the battery For more informa
22. alates A E alse Power save mode Entering numbers Making emergency calls Redialing a call Mutinga call a aari a a heeh eere tS Possible service provider services cceseeees Menu Basics eesseeseosoossossoesoessossoesoosooesoesoossossossoossess Accessing the Main Menu Navigating and using menus Phone Book Menu e ssessossossoosoossoesoossossocsoesoosoossoese Entering letters and other characters Entering pauses Saving entries Finding entries Editing entries resnem ee eaea er aE E EEEE EEAS iii Contents Erasing entries mre des danahene eueeaunce dv tunes ERTES Using the secret feature Viewing numbers 2s cice stieeseies inl ie Seek eather Deedes Sending tones iioii eee nes ide hihi nid does ee cde wiles dees Prepending numbers Speed dialing One touch dialing Call History Menu cccscccssssssessssccsees Accessing the call history list Viewing call history details Messages Menu cccccccsssscccsscsseseees Message alerts Reading messages Voice messages Text messages Key Guard Seratchpad 3 icc 2 36 ccsh avn dels biiiiis hae he lA Sachs Current position coordinates cccccecescceeseceeesseeessceeeesseeeeeseessseeens Call Information Menu ccsccccscscsscscscscceesseeees
23. alls All Calls displays the number and duration of all calls both voice and data for the lifetime of your phone You cannot reset this counter To display All Calls information 1 From standby mode press CP menu 2 Press Call Information 3 Press All Calls 4 Press F ok Resetting call counters All counters can be reset to zero except Last Call and All Calls If you want to undo the counter reset you must do it before you press Cp ok which confirms resetting the counter 51 Call Information Menu To reset the counter to zero 1 From standby mode press 7 menu 2 Press Call Information 3 Select a call counter 4 Press zero a Press gt F ok to reset the counter A Note After you press 7 ok you cannot undo the counter reset a Press undo to go back to the call counter information 52 Security Menu 6 Security 1 Lock code 2 Locking the phone 3 Restricting the phone 4 Entering priority numbers t 5 Erasing call history list 6 Erasing phone book entries 7 Erasing SMS messages 8 Resetting preferences This section provides information on how to use the following security features Lock code Locking the phone Restricting the phone Entering the priority numbers Erasing call history list Erasing phone book entries Erasing SMS messages Resetting preferences Lock code When accessing the Security menu for the first time enter the lock
24. anually from standby mode or when editing phone numbers in the phone book Each hyphen counts as one character A Note To automatically insert hyphens see Auto Hyphens page 66 DANA WN amp 66 Preferences Menu To manually enter a hyphen 1 Press and hold s The following screen displays Yul 1 GlardPause 2 WimePause 3 Hyphen 2 To add a hyphen on the screen press A Note You cannot insert a hyphen or pause as the first digit of a phone number Pressing and holding will display the messages screen Show Time The time format can be set by selecting 12 hour 24 hour UTC or Off UTC universal time coordinated displays as the default mode To set the time format 1 From standby mode press 7 menu Press Preferences Press Display Press Show Time Press 4 or to select one of the following m 12 hour Time displays in 12 hour format ak VN m 24 hour Time displays in 24 hour format m Off Time does not display 6 Press 7 ok Time Zone This feature allows you to select the display of a different time zone instead of UTC universal time coordinated time The time zone remains selected 67 Preferences Menu until you change it UTC plus or minus any hour is an option if your time zone is unavailable The available time zones include European GMT Greenwich Mean Time same as UTC BST Britis
25. available press 7 view m The text automatically scrolls on the screen and pauses so you can read it To manually scroll press a scroll key To read the next message press _ next To call back numbers in text messages 40 Press and hold Press gt P text To find the message you want press F next Press gt view Press The call back number displays if available If necessary prepend add digits before the call back number For example if you are out of the area of the phone number prepend the area code or country code Press again Messages Menu To erase text messages 1 2 3 4 5 6 Press and hold a Press text A text message displays To display more detail if available press 7 view The text automatically scrolls on the screen and pauses so that you can read it To manually scroll press a scroll key Scroll to the bottom of the message press _ options Press _ erase A Note 7 You can erase a text message even if it is locked To erase the message press ok E wp To erase all unlocked messages see Erasing SMS messages page 57 Storing text messages Text messages are saved until you erase them or until the phone memory is full To keep enough memory available delete each message If more than 75 of the phone s memory is full a message displays the amount of memory used Yul ZZZ WARNING Mem is almost full __
26. ce provider Press SZ edit Choose one of the following Reorder a Press _ Reorder Q Scroll to move the selected service provider to a new position in the Preferred List a Press ok m Delete Q Press Delete a Press ok to delete the selected service provider from the list Press P ok Re register your phone see Phone Registering page 79 System Menu Erasing a Provider from the Prohibited List CES E gt S C From standby mode press 7 menu Press System Press SP service provider Select Press Prohb List Scroll to select a service provider Press amp erase Press ok Re register your phone see Phone Registering page 79 Force Service Provider Selection This feature forces the phone to register with a service provider in the following order of priority 1 2 The phone attempts to register with your home service provider The phone attempts to register with service providers on the Preferred List The phone attempts to register with service providers on the Known List To force service provider selection 1 2 3 4 5 From standby mode press 7 menu Press System Press SP service provider Select Press Force SPS service provider selection Press 7 ok Service Provider To display the current service provider s name 1 2 From standby mode press gt menu Press System 83 System Menu 3 Press SrvePrvder 4 Press
27. creen shows the search messages that display eS Looking for menu book Once service is established also called service registered your banner the date and time and the appropriate icons display Yul LISS lt banner gt Sept 14 Tue 9 10 AM MDT Power save mode If service is not established registered while in standby mode the phone switches to power save mode Power save mode maximizes battery life by periodically looking for service The following message displays L D A Service not found Press key to retry To return to standby mode press any key Calling Basics Entering numbers When you enter a telephone number the phone accepts up to 32 digits or other characters including hyphens and pauses as Note All 32 characters do not always display on certain screens and may be replaced by periods To display the entire number use the View option in the Phone Book menu see Finding entries page 27 or the Call History menu see Viewing call history details page 35 To enter telephone numbers From standby mode use the keypad to enter the desired telephone number directly into the opening screen After the first number key is pressed a new screen displays the number and provides the following options 1 800 555 1212 To save this number in your phone book press save To find this number in your phone book press S find To clear this number and
28. d a service provider 3 Enter the phone number that you want to call see Entering numbers page 15 To dial international calls see International dialing page 17 A Note When using the keypad or viewing the screen keep the antenna pointing up to maintain service 4 Press A message displays if the phone is locked the phone number is restricted or there is another problem Making Data Calls SPOT offers a packet data service so you can make data calls The SPOT Global Phone data cable is required to connect your computer to the phone Depending on the computer or other device additional cables or an adapter may be required With the SPOT Global Phone data cable installed your computer can be used to send and receive email use Telnet or FTP or browse the Internet Getting Started ees Note Position the phone on its side for better stability ___ Fully Extend Antenna OoOO oo00 0 goood Receiving calls To receive a call 1 Turn the phone on 2 Rotate and extend the antenna to find service A Note To answer calls the antenna must be extended and rotated to vertical in a location with a view of the whole sky 3 When you receive a call the phone rings the indicator light flashes and the Incoming Call message flashes on the screen until the call is answered 4 To answer a call do one of the following m Press Getting Started m From standby mode press any key excep
29. e 26 m Send Tones press the tones are immediately sent over the air Oa p wd ee Current position coordinates This feature allows your current position coordinates to be downloaded to the phone This information is only available while a call is in progress 46 Features Menu To receive current position coordinates while making a call 1 Press menu 2 Press Features 3 Press Position a Note Before the update button is pressed the coordinates that appear show the last known position Yall Position Accuracy to N 40 5 30 W 105 10 6 within 10 kms 4 Press F Update 47 Features Menu 48 Call Information Menu 5 Call Information 1 Last Call 2 Home Calls 3 Roam Calls 4 Recent Calls 5 Data Calls 6 All Calls 7 Resetting call counters This section provides information on how to set counters that track the number of calls and airtime for billing purposes Last Call Home Calls Roam Calls Recent Calls Data Calls All Calls Resetting call counters Last Call Last Call displays the duration of the last call in minutes and seconds If Call History is empty None displays on the screen You cannot reset this counter To display last call information 1 From standby mode press 7 menu 2 Press Call Information 3 Press Last Call 4 Press CF ok 49 Call Information Menu Home Calls Home Calls displays the number and d
30. e are two types of pauses Hard Pause Stops until you press 7 resume to send the rest of the number sequence m Timed Pause Stops for two seconds and then resumes automatically A Note If Auto Hyphen is set to on and you manually enter pauses Auto Hyphen is temporarily set to off See Auto Hyphens page 66 and Manual Hyphens page 66 To enter pauses when entering numbers 1 Toenter a pause press and hold until the following menu appears Yall PZZ A 1 MlardPause 2 MlimePause 3 Hyphen 2 Press 7_ Hard Pause or Timed Pause A symbol displays on the screen for a hard pause i or a timed pause 3 3 Continue entering numbers 25 Phone Book Menu Saving entries The phone saves up to 99 entries Each entry contains a name up to 12 characters and phone number up to 32 numbers stored in location numbers 1 through 99 See Entering numbers page 15 To save a name and phone number 1 26 Enter a phone number using one of the following options From standby mode a Enter a phone number a Press gt save Yul 202 987 6543 save find m From the call history list see Call History Menu page 33 Q Select a number a Press gt P view a Press gt P options a Press save m From the scratchpad see Scratchpad page 46 a Press options a Press save m From the screen Q Select a number on the screen such as Caller ID a Pres
31. e corresponding number For example to view the menu item 1 Phone Book press 7 To save changes or a setting m Press ok To return to previous screen without saving changes Press Cer To return to standby mode without saving changes if not on a call m Press GE To return to standby mode without saving changes if on a call Press Cer repeatedly 22 Phone Book Menu 1 Phone Book Entering Letters and Other Characters Entering Pauses Saving Entries Finding Entries Editing Entries The Secret Feature Speed Dialing One touch Dialing ONOOaAhWNH This section provides information on the following functions Entering letters and other characters Entering pauses Saving entries Finding entries Editing entries Erasing entries Using the secret feature Viewing numbers Sending tones Prepending numbers Speed dialing One touch dialing Entering letters and other characters To enter letters and other characters 1 To display a letter in uppercase then lowercase and finally the corresponding number press a key repeatedly For example if you repeatedly press _3_ the following characters display DEFdef3 23 Phone Book Menu 2 To display the next character on the same key Move the cursor forward by pressing m Press the key repeatedly until the desired character is displayed For example to display E press two 2 times The E displays
32. e public and to account for any variations in measurements Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at the highest certified power level in all tested frequency bands The phone while operating can be well below the maximum level 1 American National Standards Institute 2 National Council on Radiation Protection and Measurements 3 International Commission on Non lonizing Radiation Protection 4 Internal Radiation Protection Association 92 Safety Information Before a phone model is available for sale to the public it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure The tests are performed in positions and locations as required by the FCC for each model The highest SAR value for this model phone when used at the ear is 0 020 mW g and when worn on the body is 0 564 mW g at 15 mm separation distance Body worn measurements differ among phone models depending upon available accessories and FCC requirements While there may be differences between the SAR levels of various phones and at various positions they all meet the government requirement for safe exposure The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines SAR information on this model phone is on file with the F
33. e the following system features Status Find Home Version Service Provider Select Service Provider Territory My Number Status This feature provides status for the state of the phone s antenna Globalstar Installation Kit works with SPOT Global Phone battery memory lock and self test m Indicates a good condition or ready for use Indicates a faulty condition or not ready for use m Indicates not in use 77 System Menu To access status information 1 From standby mode press 7 menu 2 Press System 3 Press 7 Status Antenna Up If displays the antenna is rotated properly If the antenna is rotated and displays contact your service provider Car Kit If displays the kit is operating properly If displays reconnect the phone in the cradle or contact the installation technician Battery If displays the battery is installed properly If displays remove and replace your battery or contact your service provider a Memory If displays there is enough available phone memory If displays delete text messages and voice mail notifications m Unlocked If displays the service provider has not locked your phone If displays contact your service provider m Self test If displays the phone has made a successful self test If displays contact your service provider 4 Press Cor or 42 Find Home The Find Home feature quickly locates your home s
34. ed message indicator 11 locking messages 42 locking phone 54 M main menu 21 medical devices 95 memory 41 42 Index text message 41 menu call history 33 call info 49 features 45 messages 37 my numbers 84 phone book 23 preferences 59 security 53 system 77 menu selection indicator 11 messages 37 alerts 37 call back numbers 40 calling voice mail system 39 erasing text 41 locking 42 reading 37 storing 41 text 39 40 unlocking 42 voice mail notifications 38 messages menu 37 minute alert 71 mode power save 14 standby 13 14 mute phone 17 mute stereo 63 my numbers 84 N navigating menus 21 new message alert 72 no service indicator 10 numbers Index 3 Index deleting 16 editing 15 entering 15 0 one touch dial setting 74 using 32 one touch dialing setting 74 P pacemakers 95 pauses 25 entering 25 PC data cable 100 phone book editing entries 28 erasing all entries 56 erasing entries 29 finding entries 27 nonsecret entries 29 saving entries 26 secret entries 29 viewing numbers 30 phone book menu 23 phone lock 54 55 phone number displaying 6 plus key dialing 17 power save mode 14 preferences time zone 67 preferences menu 59 alerts 70 calling 72 color scheme 70 display 64 Index 4 language 70 sounds 59 preferred list 80 adding 81 deleting 82 editing 82 reordering 82 viewing 81 prepend 31 priority numbers 55 prohibited list 80 adding 81 erasing 83 viewing 81 R radio f
35. ervice provider If the home provider is not available the phone searches for service based on your preference settings see Service Provider Select page 79 If the phone displays the roaming indicator while in the home area use this Find Home feature to re establish local service E wp To eliminate roaming in your home area use the Find Home feature before you place the call 78 System Menu To force the phone to find home 1 From standby mode press 7 menu 2 Press System 3 Press Find Home 4 Press C ok Version The Version feature displays the version number of the software installed on your phone To display the software version number 1 From standby mode press menu Press System 2 3 Press Version 4 Scroll to read the information see Navigating and using menus page 21 5 Press Cer or cs Service Provider Select The Service Provider feature accesses three lists of service providers Known Preferred and Prohibited This feature allows you to select and force registration with a service provider Phone Registering Registration means your phone is looking for service and obtains service after network approval m Ifthe service change alert is set to on the alert sounds a tone and displays a menu when the phone enters or leaves service See Service Change page 71 m After your phone is registered press the following key sequence for service provider informati
36. et to on dial any of the 99 location numbers without pressing Ca To one touch dial a location number 1 Set one touch dial to on see One Touch Dial page 74 2 Press and hold the location number E nip For double digit locations press and release the first digit and then press and hold the second digit For example a To enter location number 3 press and hold Q To enter location number 32 press and then press and hold 32 Call History Menu 2 Call Hist view This section provides information on how to use the call history list m Accessing the call history list m Viewing call history details The call history contains the last ten incoming or outgoing voice calls and includes the following details on each call Called By Incoming calls if caller ID is available see Caller ID page 18 Call To Outgoing calls Added Scratchpad entries see Scratchpad page 46 Missed Unanswered incoming calls if caller ID is available Caller ID Caller ID information received Call Waiting Call waiting information received during a call m The most recent call is numbered 0 and displays at the top of the list and the oldest call at the bottom separated by a dashed line m When the list is full a new call takes the first position in the list and the oldest call is deleted m The list is saved after you turn the phone off If the caller s phone number is stored in the phone book
37. f someone leaves a voice mail message your phone receives a voice mail notification and alerts you To access messages choose one of the following options Access voice mail notifications for call details m Call your voice mail system and listen to the message Service providers vary on the details provided about the message If new voice mail messages are received the total number of voice mail notifications is updated To access voice mail notifications 1 From standby mode press and hold Go The total number of voice mail messages received displays under Old Yul LIZZI Msgs New Old Text 00 00 Voice 04 text voice 2 Press G voice The voice mail notification displays either a call back number or a name if the call back number matches one in the phone book A Note If more than one name matches a call back number the entry with the lowest phone book location number displays 3 Select a message then choose one of the following options m To display more detail if available press P view m The detail information automatically scrolls on the screen and pauses so you can read it 38 Messages Menu To manually scroll press a scroll key m To read the next voice mail notification press 7 next To call your voice mail system 1 a kw bd 7 8 Press and hold e Press voice To find the voice mail notification you want press 7 next Press 7
38. h Summer Time UTC 1 hour IST Irish Summer Time UTC 1 hour WET Western Europe Time same as UTC WEST Western Europe Summer Time UTC 1 hour CET Central Europe Time UTC 1 hour CEST Central Europe Summer Time UTC 2 hours EET Eastern Europe Time UTC 2 hours EEST Eastern Europe Summer Time UTC 3 hours MSK __ Moscow Time UTC 3 hours MSD _ Moscow Summer Time UTC 4 hours MSD _ Moscow Summer Time Irkutsk MSD 5 hours MSK Moscow Chita Yakutsk MSK 6 hours MSD Moscow Summer Time Chita MSK 6 hours Yakutsk MSK Moscow Vladivostock MSK 7 hours Khabavorsk Sakhalin MSK Moscow Magadan MSK 8 hours MSD Moscow Summer Magadan MSD 8 hours MSK Moscow Kamchatka Anadyr MSK 9 hours 68 Preferences Menu MSD Moscow Summer Kamchatka MSD 9 hours Anadyr Beij Beijing China UTC 8 hours U S and AST Atlantic Standard Time UTC 4 hours Canada ADT Atlantic Daylight Saving Time UTC 3 hours EST Eastern Standard Time UTC 5 hours EDT Eastern Daylight Saving Time UTC 4 hours CST Central Standard Time UTC 6 hours CDT Central Daylight Saving Time UTC 5 hours MST Mountain Standard Time UTC 7 hours MDT Mountain Daylight Saving Time UTC 6 hours PST Pacific Standard Time UTC 8 hours PDT Pacific Daylight Saving Time UTC 7 hours HST Hawaiian Standard Time UTC 10 hours AKST Alaska Standard Time UTC 9 hour
39. he cursor when editing alphabetic characters or digits 10 11 12 13 14 15 16 17 18 19 Phone Basics SMART KEY options Select the SMART KEY option on the screen by pressing the SMART KEY button P below it SMART KEY buttons Send key Originate or answer a call Also used for features such as call waiting Punctuation key Add punctuation or spaces when entering letters International dialing or plus key Make international calls see International dialing page 17 Display indicators Show phone and battery status see Display indicators page 10 Screen Clear key m Delete characters see Entering numbers page 15 and Entering letters and other characters page 23 m Return to previous screen End Power key Press to end a call return to the main menu or turn the phone on or off Scroll keys m Scroll through menu items if a scroll arrow displays on the screen m Move cursor Message key To access messages press and hold the key See Messages Menu page 37 Microphone Antenna see Preparing to make calls page 2 Battery Battery release latch Globalstar Installation Kit connector works with SPOT Global Phone Phone Basics Display indicators The indicators on the screen show the status of the phone and the battery charge level at a quick glance Symbol AY MA Globalstar Looking for service menu book
40. he phone with or without the battery attached You can also fast charge the battery at the same time 99 Accessories Data cables The SPOT data cable is required to connect your computer to the phone Depending on the computer or other device additional cables or an adapter may be required With the SPOT data cable installed your computer can be used to send and receive email use Telnet or FTP or browse the Internet Hands free operation The Globalstar Installation Kit works with SPOT Global Phone includes a hands free component that adapts your phone for hands free operation in your vehicle For more information see the GIK 1700 Globalstar Installation Kit documentation A Caution Allow only authorized personnel to install or service the kit Faulty installation or service can be dangerous and can invalidate the warranty 100 Troubleshooting This section provides information to help troubleshoot your phone If the problems with your phone are not resolved by following these troubleshooting tips contact your service provider Problem Solution Turning the phone on Hold 42 for more than one second Check the battery installation Recharge or replace the battery Charging the battery Install only SPOT batteries Check that the battery contacts are clean and dry Check the charger connection m Ifthe battery does not charge at first remove the charger plug from the phone wait ten
41. hese guidelines for batteries 86 Only use SPOT or Globalstar batteries and chargers designed for this phone Do not use any other battery or charger To maximize battery life set the backlight option to off see Backlight page 64 To prevent damage do not charge the battery in temperatures less than 32 F 0 C or greater than 104 F 40 C Do not use the battery in temperatures less than 4 F 20 C or greater than 140 F 60 C Do not use the battery charger in direct sunlight or in places with excessive humidity such as a bathroom Keep the metal contacts at the top end of the battery clean Never dispose of the battery in a fire or trash compactor Do not try to disassemble or short circuit the battery Recharge the battery if the phone has not been used for several months Do not store batteries in places where temperatures are below 22 F 30 C or above 140 F 60 C Battery chargers Battery Care and Maintenance There are three 8 battery charger options see Accessories page 99 AC wall charger Car power adapter vehicle charger a Note To avoid damaging the phone when using the AC wall charger plug the charger into the power source first and then into the phone About battery charging The battery recharges while the phone is in use For faster charging turn the phone off The battery does not need to be completely drained before recharging Afte
42. ies used with this device for body worn operations must not contain any metallic components and must provide at least 15 mm separation distance between the antenna and the user s body Other accessories that have not been tested for body worn Specific Absorption 91 Safety Information Rate SAR may not comply with FCC radiation exposure limits and should be avoided Exposure to radio frequency signals Your wireless handheld portable telephone is a low power radio transmitter and receiver When it is on it receives and also sends out radio frequency RF signals In August 1996 the FCC adopted RF exposure guidelines with safety levels for hand held wireless phones Those guidelines are consistent with the safety standards previously set by both U S and international standards bodies a ANSI IEEE C95 1 1999 NCRP Report 86 1986 ICNIRP 1998 m IRPA 1991 Guidelines on Protection Against Non ionizing Radiation These standards are based on comprehensive and periodic evaluations of the relevant scientific literature For example over 120 scientists engineers and physicians from universities government health agencies and industry reviewed the available body of research to develop the ANSI Standard C95 1 The SAR limit for the United States and Canada is set by the FCC at 1 6 mW g averaged over one gram volume limit The standard incorporates a substantial margin of safety to give additional protection for th
43. in potential injury m Do not overheat the battery by leaving it on a heater or in the sun m Do not dispose of the battery in a trash compactor or incinerator m Use only charging accessories approved by SPOT or Globalstar and discontinue use of the battery if it becomes damaged Other safety issues In order to avoid the potential for confusing the phone as a weapon the phone features a distinctive flame orange dot at the tip of the antenna m This orange dot is a convention used by manufacturers of various devices and is familiar to safety officers in the country of manufacture and other countries m Do not remove or cover the dot and avoid using or handling the phone in a threatening manner or so as to suggest that the phone is a weapon 97 Safety Information 98 Accessories The optional accessories described in this section are available from SPOT A Caution Allow only authorized personnel to service the accessories Unauthorized service can invalidate the warranty Battery An extra battery allows you to have a charged battery available at all times AC wall charger The North American version AC wall chargers supply power to the phone and fast charge the battery while it is attached to the phone Chargers operate at 110V and 220V Car power adapter vehicle charger The car power adapter vehicle charger supports North American vehicles Plug the adapter into your vehicle s charger to supply power to t
44. its outgoing calls to emergency and priority numbers plus phone book locations 1 to 9 Phone book changes cannot be made in this mode To restrict the phone 1 From standby mode press 7 menu Press Security Enter your lock code Press Restrict Scroll to select one of these options a kw bY m Yes Make calls to emergency numbers priority numbers and phone book locations 1 to 9 only There are no shortcuts for dialing emergency numbers or priority numbers unless you add them to your phone book m No Make calls to any number Entering priority numbers Priority numbers can be called when the phone is locked or restricted Store up to three priority numbers maximum 32 digits each To enter a priority number 1 From standby mode press 7 menu 2 Press Security 3 Enter your lock code 55 Security Menu o oN e r a Press Priority Scroll to Priority 1 Priority 2 or Priority 3 Press CA edit Enter the phone number Press ok Erasing call history list This feature erases the entire call history list 1 a kw bd From standby mode press menu Press Security Enter your lock code Press Erase Call Press 7 ok a To erase the entire call history list press P ok a To return to the menu without erasing the list press Erasing phone book entries This feature erases all entries in the phone book 1 a kw bd 56 From standby mode press
45. klight on Sort Book This option allows users to select whether the phone book displays in numerical location order or by alphabetic name order To set the sort order 1 From standby mode press 7 menu 2 Press Preferences 3 Press Display 4 Press Sort Book 5 Press 4 or to select location Press again to select alphabetic 6 Press 7 ok to confirm sort change Banner When the phone is turned on a banner or personal greeting can be displayed As many as 12 characters can be added to the startup screen such as a company name or a personal reminder To edit the banner 1 From standby mode press 7 menu 2 Press Preferences 65 Preferences Menu 3 Press Display 4 Press Banner 5 Choose one of the following m Press 7 ok to return to standby mode m Press G edit to change the banner See Entering numbers page 15 6 Press F ok to confirm banner changes Auto Hyphens This feature automatically inserts hyphens when entering phone numbers As the following example shows hyphens are inserted automatically when numbers are entered HEH HHH HHHH as Note To manually enter hyphens see Manual Hyphens page 66 To set auto hyphen From standby mode press menu Press Preferences Press Display Press AutoHyphen Press 64 or to select yes Press again to select no Press 7 ok Manual Hyphens Hyphens can be entered m
46. n 79 T talk time 85 territory 84 text message indicator 10 three way calling 18 time zone selecting 69 UTC 67 time showing 67 Index 5 Index timed pauses 25 tones DTMF 30 31 sending 30 sending by phone book 31 sending manually 31 turning phone on and off 13 U undo counter 52 unlocked message indicator 11 unlocking messages 42 unlocking phone 55 vehicle charger 99 version 79 voice mail 39 voice mail notifications 38 voice message indicator 10 voice messages 38 volume buttons 8 Ww wall charger 99 Index 6
47. ng calls Press when making outgoing calls Contact your service provider or kit installer for more information on implementing this in your vehicle To mute the stereo 1 Be sure that the kit mute line is connected to the stereo mute line From standby mode press 7 menu Press Preferences Press 7_ Sounds Press Mute Stereo Ue gee 63 Preferences Menu 6 Press Gh or to select yes Press again to select no 7 Press F ok Display The following display features can be adjusted Backlight Sort Book Banner Auto Hyphen Manual Hyphen Show Time Time Zone Backlight The screen and keypad backlighting can be adjusted to maximize battery life To set the backlight 1 From standby mode press 7 menu Press Preferences Press Display Press C Backlight Scroll to select one of the following oe oN m Always Off The backlight is always off which significantly increases battery life m 7Seconds Turns the backlight off 7 seconds after the last key press m 15 Seconds Turns the backlight off 15 seconds after the last key press m 30 Seconds Turns the backlight off 30 seconds after the last key press 64 Preferences Menu m Always On The backlight is always on which significantly decreases battery life 6 Press 7 ok To turn the backlight on m Press any key wan Note If this feature is set to Always Off pressing any key does not turn the bac
48. ollowing options m Off Do not automatically redial m Every 10 seconds Automatically redial every 10 seconds m Every 30 seconds Automatically redial every 30 seconds m Every 60 seconds Automatically redial every 60 seconds 6 Press 7 ok One Touch Dial Use the one touch dial feature to call any of the 99 phone book location numbers without pressing To set one touch dial op wb ee From standby mode press 7 menu Press Preferences Press Calling Press One Touch Dial Press 4 or to select yes Press again to select no Press 7 ok See One touch dialing page 32 for more information Any Key Answer If you prefer to answer an incoming call by pressing any key except set the any key answer feature to yes A Note If this feature is not set to yes press to answer calls Qapwnrd e 74 Preferences Menu To set any key answer From standby mode press Cp menu Press Preferences Press Calling Press AnyKeyAnsw Press Gt or to select yes Press again to select no Press 7 ok 2 a Ce 75 Preferences Menu 76 System Menu 8 System 1 Status 2 Find Home t 3 Version L 4 Service Provider Select 1 Viewing Lists 2 Adding to List t 3 Editing List t 4 Erasing a Provider 5 Force Selection 5 Service Provider L 6 Territory 9 My Number This section provides information on how to us
49. on Press again to select off Press 7 ok Minute The minute alert occurs ten seconds before the end of every minute To set the minute alert ant kt WN Ee From standby mode press menu Press Preferences Press Alerts Press Minute Press G or to select on Press again to select off Press 7 ok Service Change The service change alert occurs when the phone enters or leaves service This alert displays a message and can also be configured to sound a tone 71 Preferences Menu To set the service change alert anak ON amp From standby mode press 7 menu Press Preferences Press Alerts Press Service Press 4 or to select on Press again to select off Press CA ok New Message The new message alert occurs when you receive a new text message or voice mail notification To set the new message alert 1 From standby mode press 7 menu 2 Press Preferences 3 Press Alerts 4 Press New Message 5 Press G or to select one of the following options m Off Phone does not sound a beep when a new message is received m Once Phone sounds one beep when a new message is received m Periodic Phone sounds a beep periodically when a new message is received until you retrieve the message by pressing 6 Press 7 ok Calling The following features can be configured to simplify the calling process m Auto Answer m Auto Redial m One Touch Dial m Any
50. on and the current phone number 79 System Menu a gt Menu a System Q Service Provider Changes made to the Preferred or Prohibited Lists do not take effect until the phone is registered again with the network To register the phone choose one of the following methods Turn the phone off and on Find your home service provider see Find Home page 78 m Force service provider selection see Force Service Provider Selection page 83 If you add the currently registered service provider to the Prohibited List the phone automatically re registers Service Provider Lists m Known List Displays all of the known service providers that can be added to the Preferred or Prohibited Lists This list is created and updated by the service provider New service providers are automatically added as they become available a Service providers placed on the Preferred List are highlighted a Service providers placed on the Prohibited List are crossed out a Service providers on both the Preferred and Prohibited Lists are highlighted and crossed out m Preferred List Displays your preferred order of priority for service providers a Highlighted first on the screen is your home service provider Q The order of priority is shown by the number to the left of the service provider s name m Prohibited List Displays the service providers in alphabetical order that you choose not to use 80 System Menu
51. options Editing entries Changes can be made to an entry name phone number or location To edit an entry 1 From standby mode press book Scroll to the entry to be changed Press view Press P options To edit press T Select one of the following categories aA VN Name a Press 7 a Enter changes a Press ok m Phone Q Press a Enter changes a Press ok m Location a Press Q Select one of the following options Use the same location number press gt ok Enter a location number of your choice press ok Scroll to select an empty location press ok 28 To edit erase make secret view number prepend add or send tones Phone Book Menu Erasing entries Entries can be erased quickly and easily with a few keystrokes To erase an entry Oar wh ee From standby mode press _ book Scroll to the entry to be erased Press view Press options Press to erase Press P ok Using the secret feature To prevent a phone number from displaying on the screen use the secret function To view or change a secret entry use the lock code See Lock code page 53 as Note When receiving an incoming call caller ID prevents the name and phone number from displaying if the entry in your phone book is secret To configure the secret function on wh ee From standby mode press _ book Scroll to the entry to be changed Pre
52. pacemaker when the phone is turned on Do not carry the phone in a breast pocket Use the ear opposite the pacemaker to minimize the potential for interference m Ifyou have any reason to suspect that interference is taking place turn your phone off immediately Hearing aids Some digital wireless phones may interfere with some hearing aids In the event of such interference you may want to consult your service provider Other medical devices If you use any other personal medical device consult the manufacturer of your device to determine if they are adequately shielded from external RF energy Your physician may be able to assist you in obtaining this information Turn your phone off in health care facilities when any regulations posted in these areas instruct you to do so Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy 95 Safety Information Vehicles and vessels RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles Check with the manufacturer or its representative regarding your vehicle You should also consult the manufacturer of any equipment that has been added to your vehicle or vessel Posted facilities Turn your phone off in any facility where posted notices so require Aircraft FCC regulations prohibit using your phone while in the air Switch off your phone before boarding an aircraft Blasting area
53. phone with the antenna pointed up and over your shoulder EA Tip For your phone to operate most efficiently Q Rotate and fully extend the antenna a Do not touch the antenna unnecessarily when the phone is in use Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed Driving In the areas where you drive always obey the local laws and regulations on the use of wireless telephones If using your phone while driving please m Give full attention to driving driving safely is your first responsibility m Use the hands free component of the Globalstar Installation Kit works with SPOT Global Phone if available m Pull off the road and park before making or answering a call if driving conditions so require 94 Safety Information Electronic devices Most modern electronic equipment is shielded from RF signals However certain electronic equipment may not be shielded against the RF signals from your wireless phone Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six 6 inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research When wearing a pacemaker m Always keep the phone more than six inches from the
54. r connecting the phone to one of the chargers check the charging status flash in sequence a Ifthe battery is charging the bars on the battery indicator Va battery indicator LLL Q Ifthe phone is turned off a message displays and the bars on the flash in sequence When charging is complete a message displays on the screen Low battery The phone alerts you when the battery is low The battery indicator flashes 87 Battery Care and Maintenance The phone beeps three times if you are on a call the phone continues to beep every minute The message Low Battery Recharge Battery Soon displays on the screen If the battery level gets too low the phone turns off and loses any call in progress Q Before turning off the phone alerts you with five beeps Q The message Low Battery Turning Off Phone Now displays on the screen E wp To turn off the battery alert set the ringer volume to zero 0 Battery removal To remove the battery complete the following steps 1 2 3 88 Turn the power off to avoid losing data Press and hold the battery release latch in the direction of the arrow to release it from the phone Lift the battery cover by the release latch Remove battery as described in Battery replacement page 89 Battery Care and Maintenance Battery replacement To replace the battery complete the following steps 1 Ifa battery is
55. r service provider Menu Basics This section provides a guide to m Accessing the Main Menu menu m Navigating and using menus The following chart shows the various menus available from the Main Menu Press menu to access the Main Menu 19 Menu Basics 20 1 Phone Book 1 2 3 4 5 6 7 8 Entering Letters and Other Characters Entering Pauses Saving Entries Finding Entries Editing Entries The Secret Feature Speed Dialing One touch Dialing 2 Call History L View 3 Messages Text Voice 4 Features 1 Keyguard 2 Scratchpad 3 Current Position Coordinates 5 Call Information 3 4 5 1 Last Call 2 Home Calls Roam Calls Recent Calls Data Calls 6 All Calls 7 Resetting call counters 6 Security ONOahWN Locking the phone Restricting the phone Lock Code Entering priority numbers Erasing call history list Erasing phone book entries Erasing SMS messages Resetting preferences 7 Preferences 2 Disp 3 Alert 4 Calli 8 System 2 Find 3 Vers 9 My Number 1 Sounds 1 Ringer Type 2 Ringer Volume t 3 Earpiece Volume 4 Key Beep Sound m 5 Key Beep Volume 6 Key Beep Length 7 Mute Stereo lay 1 Backlight 2 Sort Book m 3 Banner m 4 Auto Hyphens m 5 Show Time t 6 Time Zone t 7 Language 8 Display Color s 1 Fade 2 Minute m 3 Service change 4 Ne
56. requency 92 recent calls 50 redialing calls 17 registering phone 79 removing battery 88 reordering preferred list 82 replacing battery 89 resetting call counters 51 52 resetting preferences 57 restricting phone 55 ringer silenced indicator 10 silencing 61 type 60 volume 60 volume indicator 10 roam calls 50 roaming indicator 10 S safety air bags 97 aircraft 96 antenna 94 blasting areas 96 body worn operation 93 driving 94 electronic devices 95 explosive atmospheres 96 hearing aids 95 hospitals 95 medical devices 95 pacemakers 95 radio frequency 92 saving menu changes 22 scratchpad 46 scroll arrows 11 scroll keys 2 9 secret entries 29 security menu 53 erase call history 56 erase phone book 56 erase SMS messages 57 lock phone 54 new code 53 new lock code 54 priority numbers 55 resetting preferences 57 restricted 55 unlock phone 55 sending tones 30 call history 36 manually 31 phone book 31 scratchpad 46 service alert 71 72 service provider Index accessing information 83 force selection 83 lists 80 select 79 show time 67 signal strength indicator 10 silence ringer 61 SMART KEYS 2 9 SMS messages about 37 erasing entries 57 software version 79 sort order 65 sound 59 speed dialing 32 standby mode 13 14 standby time 85 status 77 78 stereo muting 63 system menu 77 find home 78 force system reacquisition 79 service provider 83 service provider select 79 status 77 78 territory 84 versio
57. s menu Press Preferences Press Z Sounds Press KeyBeepVol Press 44 to increase or to decrease the volume To turn the key beep volume off press until the word Silent appears 7 Press gt ok Key Beep Length The length of the sound you hear when pressing the key key beep can be changed The standard key beep is short and fixed in length The custom key beep sounds as long as you press a key Oa wh Using the standard key beep setting is recommended unless a service or device such as answering machines requires a custom key beep 62 Preferences Menu a Note The key beep length affects the DTMF tones used for sending tones over the network for automated phone services such as voice mail or online banking Select the appropriate key beep length before sending tones see Sending tones page 30 To set the key beep length 1 From standby mode press CP menu Press Preferences Press 7_ Sounds Press KeyBeepLen Press 4 or to select standard Press again to select custom Ce ae SoS m Standard Key beep is short and fixed in length m Custom Key beep sounds as long as you press a key 6 Press P ok Mute Stereo To use this feature the Globalstar Installation Kit works with SPOT Global Phone mute line must be connected to the stereo mute line When using the kit this feature can beset to automatically mute the stereo in your vehicle when receiving incomi
58. s To avoid interfering with blasting operations turn your phone off when in a blasting area or in areas posted Turn off two way radio Obey all signs and instructions Potentially explosive atmospheres Turn your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death Areas with a potentially explosive atmosphere are often but not always clearly marked They include fueling areas such as gasoline stations fuel or chemical transfer or storage facilities vehicles using liquefied petroleum gas such as propane or butane areas where the air contains chemicals or particles such as grain dust or metal powders and any other area where you would normally be advised to turn off your vehicle engine 96 Safety Information For vehicles equipped with an air bag An air bag inflates with great force Do not place objects including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area If in vehicle wireless equipment is improperly installed and the air bag inflates serious injury could result Battery care The phone s battery stores a large amount of energy when fully charged If the battery is punctured crushed severely overheated or charged in a non SPOT or Globalstar charger this energy can be released suddenly and result
59. s AKDT Alaska Daylight Saving Time UTC 8 hours To select a different time zone 1 From standby mode press 7 menu 2 Press Preferences 3 Press Display 4 Press TimeZone 69 Preferences Menu 5 Press 1 to select a time zone from the list Press to move backward through the list 6 Press C7 ok Language Several languages are available to be displayed on your phone s screen English Spanish Portuguese French Russian and Chinese To set the language From standby mode press P menu Press Preferences Press Display Press Language Press 4 or to select from the list of available languages Press ok Display Color Scheme Several color schemes are available for your phone s screen anh wN amp To set the display color From standby mode press P menu Press Preferences Press Display Press Display Color Press 4 or to select from the list of available color schemes Press CA ok Alerts For your convenience alerts may be configured to produce a tone while flashing a message The following alerts can be set to sound a tone m Fade ana r ON amp 70 Preferences Menu m Minute m Service change m New message Fade The fade alert occurs when any network drops a call To set the fade alert anak WwW NWN amp From standby mode press menu Press Preferences Press Alerts Press 7_ Fade Press 69 or to select
60. s amp mute The word Mute replaces the word Time on the screen until you end the call or turn mute off Yul l 1 06 menu _ mute To turn mute off m Press G mute The word Time replaces the word Mute on the screen Possible service provider services International dialing To make international calls 1 Enter the international access code the country code and the phone number Shortcut Press and hold until a plus displays on the screen and then enter the country code and phone number 17 Calling Basics 2 Press If international dialing is supported in your network contact your service provider for more information Position location service While making a call it is possible to download your current location coordinates See Current position coordinates page 46 Call waiting Call waiting lets you know that you are receiving an incoming call by sounding a beep For instructions on how to use call waiting contact your service provider Three way calling Three way calling allows you to talk to two callers at the same time For instructions on how to use three way calling contact your service provider Caller ID Caller ID displays an incoming call s phone number on the screen if available If the phone number of the caller matches one stored in your phone book the name also displays with the number For more information on caller ID contact you
61. s save Using the keypad enter a name Press P ok Phone Book Menu 4 Select a location number If the phone book is not full you are asked to accept an empty location Choose one of the following options a Accept the empty location then press 7 ok a Enter a location number of your choice then press 7 ok a Scroll to select an empty location then press CF ok If the phone book is full enter a location number that you want to reuse and replace with the new information The old information is deleted Finding entries Find entries by name phone number or location number Quickly advance to groups of ten entries or scroll through each entry one at a time To find an entry 1 From standby mode press book 2 Choose one of the following options Scroll through each entry one at a time Advance to groups of ten entries by entering 1 through 9 For example enter 6 location number 60 is selected If 60 is empty the previous filled location is selected Locate specific entries using the find function a Press G find Q Choose one of the following options Name press 7 Phone press Location press a Enter one or more characters all characters are classified by the search function as lowercase o Press gt find 27 Phone Book Menu Use the scroll keys to select an entry To view an entry press view To call the number press F Ona p w press _
62. ss 7 view Press 7 options Press 3 Select one of the following options m Yes Make the entry secret m No Make the entry non secret 29 Phone Book Menu 7 Press P ok To view or change a secret entry From standby mode press book Scroll to the secret entry Press C7 view Press 7 options Enter your lock code Select an option to change or view the entry Press 7 ok to accept any changes and return to the options menu IS AR One Viewing numbers An entry s entire phone number can be viewed and edited When viewing a number you can also prepend add numbers at the beginning of a phone number and save those changes To view a number From standby mode press _ book Scroll to the entry to be viewed Press 7 view Press options Press View Select one of the following options m To return to the previous menu press 7 ok m To return to standby mode press Onap wd Sending tones While making a call you may need to send DTMF dual tone multi frequency tones over the air Automated phone services such as voice mail or online banking usually require a tone before activating 30 Phone Book Menu Tones are sent by manually entering numbers or using numbers stored in the phone book You can also send tones for numbers entered in the scratchpad see Scratchpad page 46 A Note The length of the key beep the sound you hear when pressing the keys affects
63. ssues osesoossssssssseesereeseeessresssreesee Accessories e ssessoesoesoosoe E RS IFNA TEI m AE EEEE EE AA E TE A O Contents AC wal charger asec acces eae ee Se Universal travel charger Car power adapter vehicle charger Data cables iieiea EE a Hands free operation Troubleshooting e ssssessecessccesoosssccessoessocsssoesscossscsessessssosssossssesesoesssesssse LOL vi A A A Oe Cautions and Warnings Warning Only use the batteries antennas and chargers provided by SPOT or Globalstar The use of any other type may be dangerous Warning Allow only authorized personnel to service the phone and its accessories Unauthorized service can invalidate the warranty Caution Any modification to this product is prohibited and will void your warranty The opening of the unit and use of the components for purposes not otherwise authorized by this document including any use in airplanes or any other Aviation application is prohibited and will void your warranty Caution Avoid exposing the phone and accessories to rain or other liquids If the phone gets wet turn the power off immediately and remove the battery pack See Battery Care and Maintenance page 85 for more information Note When using the SPOT Global Phone near a television or radio the phone can cause interference Regulatory agencies in your area such as the United States Federal Communications Commission FCC or Canadian Industry Can
64. t The Any Key Answer feature must be set to on see Any Key Answer page 74 5 Ifyou miss acall a message is displayed To display the call history list for details about the missed call press CA view 6 Press 7 ok to return to standby mode Ending calls To end calls press The total duration of the call is displayed For details of all calls see Viewing call history details page 35 Displaying your phone number m To display the phone number a Press F menu a Press for My Number See My Number page 84 A Note The currently registered phone number briefly displays when the phone is turned on Solving problems If you have problems using your phone see Troubleshooting page 101 If the problems are not resolved contact SPOT at www findmespot com Contacting customer service Contact SPOT for customer service Phone Basics This section provides information on the following functions Phone features and keypad Display indicators Antenna Phone Basics Phone features and keypad powered by satellite Light indicator Flashes when turning the phone on when receiving incoming calls or when receiving text not available in all markets or voice mail messages Earpiece Volume buttons Adjust ringer volume when not on a call Scroll through the menu items if a scroll arrow displays Scroll through call history and phone book Move t
65. t to use the antenna properly for the best performance Follow these guidelines for the antenna Never hold the phone by the antenna m Do not use the phone if the antenna is damaged unless the phone is being used with the Globalstar Installation Kit works with SPOT Global Phone For more information on how to use the antennas see Preparing to make calls page 2 11 Phone Basics Calling Basics This section provides information on the following basic features Turning the phone on and off Standby mode Power save mode Entering numbers Making emergency calls Redialing a call Muting a call Possible service provider services Turning the phone on and off Turning the phone on 1 Before turning the phone on make sure that the battery is charged and properly installed see Battery chargers page 87 and Battery replacement page 89 Press and hold until the indicator light illuminates about one second The phone is now in standby mode see Standby mode page 14 searching for service Z wp When the phone is turned on a Globalstar animation sequence displays To stop this animation press any key Turning the phone off 1 Press and hold until Powering Off displays 2 Release 13 Calling Basics E wp If the phone does not turn off press and hold for more than one second Standby mode With the power on the phone is in standby mode while searching for service The following s
66. the caller s name displays in the call history list Ifmore than one name matches a call back number the entry with the lowest phone book location number displays 33 Call History Menu Accessing the call history list To access the call history list 1 34 From standby mode press 7 menu Then press Call History Or Press A To access the last ten calls press the scroll keys For example Yul 0 EAT 1 John 2 5551212 Scroll down to select a call from the most recent to the oldest calls or scroll up to select a call from the oldest to the most recent After selecting a call choose one of the following options To call the number press EASE m To save the number in your phone book a Press view a Press options a Press save a Press P ok see Saving entries page 26 m To exit call history without calling or storing a number press or Call History Menu Viewing call history details To view call history details 1 Scroll to select a call on the list 2 Press view CALL TO Bob 2 202 987 6543 3 Press 7 options 4 Select one of the following m Date Time Display the date and time of the call Yul Date Time Sept 22 Wed 3 45 PM MDT 35 Call History Menu Duration Display the duration of the call Yul Call Duration 2 min 25 sec m Save Save the number in your phone book Yall Options Date Time
67. the duration of manually entered DTMF tones Stored tones are always sent with a fixed DTMF duration Check your key beep length before sending tones see Key Beep Length page 62 To send tones manually m While on a call enter the appropriate numbers m The tones associated with the numbers are immediately sent over the air To send tones saved in your phone book 1 While on a call press amp book Scroll to an entry Press view Press C options Press Send Tones The tones associated with the numbers are immediately sent over the air a kw bY Prepending numbers Add prepend numbers such as an area code or country code at the beginning of a phone number in an existing phone book entry To prepend add numbers 1 From standby mode press _ book 2 Scroll to the entry to be changed 3 Press 7 view 31 Phone Book Menu 4 Press options 5 Press Prepend The phone number displays 6 Enter the numbers to be added to the displayed characters 7 Press 7 save Speed dialing Speed dial a phone number if you know the location number of the phone book entry Speed dial any of the 99 location numbers unless the phone is restricted If you restrict the phone only the first nine phone book locations are available for speed dial See Restricting the phone page 55 To speed dial a phone number 1 Enter the location number 2 Press One touch dialing If one touch dialing is s
68. tion refer to Battery Care and Maintenance page 85 Rotate and extend the antenna located on the back of the phone see Phone features and keypad page 8 SMART KEY is a trademark of QUALCOMM Incorporated Getting Started Move the antenna to its optimal position pointing straight up to the sky until it sets into one of three positions Ensure the antenna is fully extended You cannot make or receive a call with the antenna stored The following shows correct and incorrect antenna positions NOTE Full Antenna Extension Left Side Correct Incorrect The phone does not operate inside a building nor does it operate in a vehicle unless you are using the Globalstar Installation Kit works with SPOT Global Phone To prevent dropped calls use the phone outdoors where you can see the whole sky and have direct line of sight access to the satellite If a call is dropped a fade alert sounds to verify that this feature is turned on see Fade page 71 For best performance move away from tall obstacles such as buildings or trees Correct Incorrect Incorrect Incorrect without kit Getting Started Making voice calls 1 Rotate and extend the antenna see Preparing to make calls page 2 2 Press and hold to turn your phone on A Note The roaming indicator A usually displays immediately if the network roams to fin
69. uration of all incoming and outgoing calls made in your home service area as defined by your service provider To reset this counter to zero see Resetting call counters page 51 To display home calls information 1 From standby mode press menu 2 Press Call Information 3 Press Home Calls 4 Press gt ok Roam Calls Roam Calls displays the number and duration of calls made while roaming out of your home service area To reset this counter to zero see Resetting call counters page 51 To display Roam Calls information 1 From standby mode press 7 menu 2 Press Call Information 3 Press Roam Calls 4 Press 7 ok Recent Calls Recent Calls displays the number and duration of calls made or received since resetting the counter To reset this counter to zero see Resetting call counters page 51 To display Recent Calls information 1 From standby mode press 7 menu 2 Press Call Information 50 Call Information Menu 3 Press RecentCall 4 Press F ok Data Calls Data Calls displays the number of bytes received or transmitted and the duration of data calls made since resetting the counter To reset this counter to zero see Resetting call counters page 51 52 To display Data Calls information 1 From standby mode press menu 2 Press Call Information 3 Press Data Calls 4 Scroll to view the number of bytes received or transmitted and the duration of each call 5 Press CA ok All C
70. view Press G The phone number for the voice mail system displays if available If it does not display the message No Voice Mail Number received displays Manually enter the voice mail phone number If necessary prepend add digits before the voice mail phone number For example if you are out of the area of your voice mail phone number prepend the area code or country code Press again To retrieve your messages follow the voice mail system instructions To erase voice message notifications anak ON amp Press and hold Press voice To find the voice mail notification you want press P next Press C7 view To erase the message press _ erase Press 7 ok Text messages Text messages can include call back numbers messages urgency stamps time and date stamps and names if the call back number matches one in the phone book The phone stores as many text messages as available 39 Messages Menu memory allows For more information on managing phone memory see Storing text messages page 41 Accessing text messages To access text messages 1 2 Press and hold The number of new and old text messages display Press text The newest unread messages display first followed by the newest read messages if any The number of messages under Old is the number of messages already read but not deleted Select a message then chose one of the following To display more detail if
71. w Message ng 1 Auto Answer 2 Auto Redial 3 One Touch Dial m 4 Auto Key Answer 5 Ring While Stowed 1 Status Home ion 4 Service Provider Select 1 Viewing Lists 2 Adding to List t 3 Editing List 4 Erasing a Provider 5 Force Selection 5 Service Provider __ 6 Territory Menu Basics Accessing the Main Menu The Main Menu provides access to all of the phone s features Use the scroll keys and to move between screens Use Cer to move backward through the screens 1 To access the Main Menu turn the phone on The phone is now in standby mode see Standby mode page 14 2 Press menu and the first three Main Menu items display If scroll arrows display on the screen you can scroll between screens to access additional menu options Each Main Menu item is explained in sequential order in separate sections of this guide Yul J aH Main Menu 1 Phone Book page 23 2 Call Hist page 33 3 Messages page 37 Yul J Main Menu 4 Features page 45 5 Call Info page 49 6 Security page 53 Yul JS wa Main Menu 4 7 Preference page 59 8 System page 77 9 My Number page 84 Navigating and using menus To navigate the menus m When a scroll arrow or arrows displays on the screen there are additional menu items available Press a scroll key or to access those items 21 Menu Basics To select a menu item press th

User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents