Pro-Ject DAC Box S USB - Box Design by Pro
Contents
1. 10 DE BY PRO JECT AUDIO SYSTEMS INSTRUCTIONS FOR USE Pro Ject DAC Box S USB Dear music lover thank you for purchasing a PRO JECT AUDIO DAC Box In order to achieve maximum performance and reliability you should study these instructions for use carefully V Warning of a hazard for the user the unit or possible misuse nes Important notice Safety instructions AC outlet voltages vary from country to country Before connecting to the mains make sure that the voltage in your area meets the voltage requirements printed on the power supply The power supply is used to disconnect the unit from the mains Make sure that the power supply is easily accessible at all times Never handle the device the power supply while your hands are wet or damp Avoid letting liquids enter the device or the power supply Never place any item containing liquid such as a flower vase on or near the device Never spill any liquid on the device or the power supply Never place any naked flame sources such as lighted candles on or near the device The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions Connectors Out Digital input Power Left Right Optical Co axial 9V x meai CE Pro Ject Audio Systems Vienna Austria e G Make all connections except the connection to the computer whilst the unit is disconnected from the power supp2. g from the power supply to the Power 9V socket before connecting the power supply to the mains Front panel controls P de n 0 DAC Box S USB To switch on from standby or to standby The push button on the left hand side will toggle the DAC between its fully operational status and standby The blue LED above the stand by push button shows that the unit is switched on If there is no input signal after the DAC got powered on the unit switches through all inputs sequentially until it detects a signal at one of the inputs Input selector Pressing the grey button next to the three LEDs repeatedly selects the digital inputs in turns The selected input will be shown by the corresponding LED on the DAC Box S USB Technical specifications Pro Ject DAC Box S USB Line level output 1 pair RCA phono sockets Output voltage 1Vrms Digital outputs 1 x coaxial S PDIF 1 x optical TOSlink 1 x USB mini B socket USB cable supplied USB input digital serial data protocol USB 1 1 THD 0 0035 Operating systems Windows XP Windows VISTA Windows 7 Windows 8 Mac OS D A converter Texas Instruments TLV320DAC23 24Bit 96kHz 8 times oversampling Supported audio format PCM LPCM No support for formats like Dolby Digital or DTS Sampling rates USB input 32kHz 44 1 kHz and 48kHz Optical and coaxial input 8kHz 16kHz 32kHz 44 1kHz 48kHz and 96kHz Outboard power supply 9V 300mA DC suitable for your coun
3. lby is a registered trademarks of Dolby Laboratories DTS is a registered trademark of DTS Inc 4 Audio Trade GmbH Pro Ject DAC Box S USB Revision 2013 8 15
4. ly Connect the unit to the mains and switch it on before connecting it to the computer V Take care to connect the left and right channels correctly The right channel is usually marked red the left channel black or white Never use any other power supply than the one supplied with the unit Connection to the amplifier Connect the Out socket to a line input such as AUX on your amplifier Inputs Sources with an digital output such as a CD player can be connected to the digital inputs coaxial and optical A computer can be connected to the USB input The DAC supports PCM LPCM format only The DAC does not work with audio formats like DTS or Y Dolby Digital If the DAC is used with a TV satellite cable receiver or a TV sets with an integrated satellite cable receiver make sure that in the set up menu of your receiver TV set the format of the digital signal relayed to the digital output used is set to PCM Connecting to a Computer Connect the USB input of the DAC unit must be switched on to a free USB socket on your computer and turn it on make sure it is powered on The DAC will be automatically recognised by the computer There is no need to install a driver manually Please note Connection should be made to an USB socket of your computer directly Connecting to USB hubs or switches can cause problems 2 Audio Trade GmbH Pro Ject DAC Box S USB Revision 2013 8 15 Mains power connection Connect the low voltage plu
5. try s mains supply Power consumption 100mA DC lt 1W in standby Dimensions W x H x D D with sockets 103 x 36 x 104 115 mm Weight 680g without power supply Audio Trade GmbH Pro Ject DAC Box S USB Revision 2013 8 15 3 Service Should you encounter a problem which you are not able to alleviate or identify despite the above information please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawtul rights of the customer Copyright trademarks PRO JECT is a Registered Trademark of H Lichtenegger The information was correct at the time of going to M press The manufacturer reserves the right to make This guide was produced by Audio Trade GmbH changes to the technical specification without prior Copyright 2011 All rights reserved notice as deemed necessary to uphold the ongoing process of technical development Windows XP Windows Vista Windows 7 Windows 8 are trademarks of the Microsoft group of companies Mac and Mac OS are trademarks of Apple Inc registered in the U S and other countries TOSlink is a registered trademark of Toshiba corporation Do
Download Pdf Manuals
Related Search