disinfection cabinet user manual model: mdc-11e
Contents
1. the lower cabinet The product can kill colon bacillus staphylococcus and bacteria causing hepatitis It is an ideal disinfection cabinet for the restaurant kindergarten hotel dining hall and other places Warning Only when the upper door is closed can the disinfection cabinet work normally otherwise there will be leak of ozone Do not put any other thing than tableware into the disinfection cabinet In order to achieve the best disinfection result and avoid burning your hands or leak of ozone you are suggested to wait for another 20mins before opening the door after the sterilizing is finished and do not take out the tableware before they cool down Cannot put the plastic and wooden product into the lower cabinet High temperature please be careful not to get burnt Special Attention For the tableware of which heat resistance is below 75 C should not be placed in the cabinet For the tableware of which heat resistance is below 180 C such as high temperature resistance plastic materials silicon rubber product or low temperature resistant glass products should not be put into the lower cabinet The tableware of which heat resistance is between 180 C to 250 C should be put away about 100mm from the heat pipe Precautions The power supply socket must be reliably ground The user should not change the socket by himself Please a Steet refer to picture 1 I The tableware should be dry befor2. Fresh button again If the door of the upper cabinet is not closed beep sound will caused if press Ster and Fresh button please keep the door is closed Disinfection and Drying on the lower cabinet Disinfection Press Disinfect button all indicator light up and flickering display will show the temperature in the lower cabinet it will begin to work in 5 seconds When the temperature reach to 120 C the heater will continue to work from time to time and it will stop working after keeping 120 C for 15 minutes If need to pause press Disinfect button again Drying Press Dry button all indicators light up and flickering display will show the temperature in the lower cabinet it will begin to work in 5 seconds When the temperature reach to 65 C the heater will continue to work from time to time and it will stop working after keeping 65 C for 45 minutes If need to pause press Dry button again If the door of the lower cabinet is not closed there is beep sound when you press Disinfect and Dry button It can only work when the door is closed Child lock After the all the functions are set you can set up child lock to prevent any mess up by mis control press power button for 3 seconds when the functions lights are still flickering there is beep sound the child lock function is begin and it will show in the display Only Power button can be used until
3. binet is closed automatically the door of the upper cabinet cannot open It can only open after the working finished light off and intelligent safety lock open automatically When you need to open the door press the corresponding function button or Power button 2 When Disinfection Drying function is working the intelligent safety lock of the lower cabinet is closed automatically you can not open the door Only after drying function is finished or the sterilizing working finished 20 minutes delayed light off the intelligent safety lock automatically release There will be a beep sound when all of the work finished and it will automati cally powered off all of the icon indicator light and display will be light off except the power indicator light How to install Please set the hole as the pictures show Take down the two screws which on the two sides of disinfection cabinet Put the disinfection cabinet into the hole carefully pull the door and fix by two wood screws As the picture The disinfection cabinet can set under or the on the kitchen cabinet The distance of the socket should be in 1 2m Please read the precautions carefully and install accurately Test it according to the user manual Thanks for using Malloca disinfection cabinet Malloca disinfection cabinet keeps clean and dries the tableware and appliance disinfected with ozone UV in the upper cabinet and sterilize by far infrared in
4. e putting into the L cabinet and shouldn t be overlapped to obtain the best U LH Phase tine sterilizing effect Don t touch the glass of the door when it is sterilizing for avoiding being scalded Don t block the Air off hole When the maintenance work is required the power supply should be turned off first Don t put the disinfection cabinet near the tinder and the cloths things are not allowed to put into on or beside the cabinet Please turn off the power supply after sterilizing or finish cleaning As to the special people like children are not suitable to use this disinfection cabinet Neutral line How to handle the junk product for the junk appliances which excess the safety life or not available with the repair value the user should take the appliance to the recycle enterprise household appliance agent or after sales service center The user is not allow to throw away the junk appliance by themselves Names of Components 1 Ster button 6 Power button 11 Heating tube 2 Fresh button 7 Door switch 12 Screw 3 Pre set button 8 Upper cabinet 13 Air hole 4 Disinfect button 9 Lower cabinet 14 UV amp Ozone lamp 5 Dry button 10 Dish rack 15 Power wire Major Technical Data Model MDC 11E Power supply 220V 50Hz Rated input power 520W Interior volume 100L 60 C 3 C upper Power of ozone UV lamp asee lower cabinet Life span for the heat pipe gt 3000h Work cycle load gt 30mins Rated loading weig
5. ht of each rack Skg 25 5kg 595 453 630mm Exterior dimension Features With smart child lock function avoiding any leakage of Ozone UV and burn it s much safer High and low temperature disinfection cabinet the upper and lower cabinet with different mode of sterilize Ozone UV dry in the upper cabinet and high temperature in the lower cabinet The slide track in the cabinet can avoid the lube to pollute the tableware How to use 6 touch button Ster Fresh Pre set Disinfect Dry and Power All of the operations will begin after 5 seconds delay Power on After plug in there is beep sound the display and indicator light will be on it will off in 5 secs and power LED is semi light means power on Touch Power button power LED completely light up function indicator semi light the disinfection cabinet is starting up Sterilizing and Keep fresh on the upper cabinet Sterilizing Press Ster button indicator is light up and flicker display will show 120 minutes it will begin to work in 5 seconds display will counter down and it will stop sterilizing after time stop Sterilizing time includes the drying time If pause needed press Ster button again Keep fresh Press Fresh button and indicator light up and flickering display show 30 minutes it will begin to work in 5 minutes the display time will counter down it will stop working after time stop If pause needed press
6. the working is finished If you need to pause the child lock function press Power button for 3 seconds there is beep sound the child lock icon in the display is light off and Child lock function is canceled 3 Air vents 120 120 7 gt a A 5 Ke S 630 Daily Maintenance It is suggested to clean the product often Remember to disconnect the power supply before cleaning Then use a wet towel with some neutral detergent to wipe off the stain inside or outside of the cabinet and then use a dry towel to wipe off the remaining detergent The common fault and how to handle The socket out of touch Repair or replace Fail to work Fuse break down Replace the fuse Power supply line Replace the power break down supply line Door control switch Replace the door break out control switch Electronic ballast Replace the electronic UV lamp fail k P UV lamp Replace the break down UV lamp l l Relays break down Replace the relays Heat pipe fail to work Heat pipe break down Replace the heat pipe
7. x x M MALLOCA Ky DISINFECTION CABINET USER MANUAL MODEL MDC 11E Please read this manual carefully before using the product and keep it properly Pre set 1 Set Pre set Press Pre set button pre set icon in the display is on pre set indicators light up the display is showing 1 means 1 hour press one time means 1 hour more you can choose 1 24 hours After you choose the time choose the working function and it will enter the Pre set function in 5 seconds 2 Cancel Pre set When it enter into the pre set condition press Pre set button again it will cancel the Pre set function the Pre set icon will light off 3 Modify Pre set If you need to modify the pre set time after it already enter into the pre set working condition press Pre set button again and then you can choose the pre set time you want Caution 1 If you press Pre set and already choose the time but without choosing any other working function in 10 seconds then it will cancel the pre set function automatically Caution 2 When it enter into any working condition power indicator light are on all the corresponding function indication light are on other indicator light are off it will lock the display Then press any button make all of the indicator light are on then you can make it work Intelligent safety lock 1 When Sterilizing Keep fresh function is working the intelligent safety lock of the upper ca
Download Pdf Manuals
Related Search