Chung`s Retractor 201 User Manual
Contents
1. Chung s Retractor 201 User Manual Chung s Retractor 201 User Manual 1 Blade Connector 2 Elevator Handle 3 Elevator Connector 4 Elevator 5 Table Connectors 1 Join one Table Connector to another one and tighten up by using the screw g Caution You must put entire length of the shaft into the other Table Connector If not it may cause bent of the shaft in use when excessive force is applied 2 Join the Elevator into the Table Connector and tighten up a z CD Co Caution You must put entire length of the Elevator shaft into the Table Connector If not it may cause bent of the shaft in use when excessive force is applied Chung s Retractor 201 User Manual 01 3 Join the Elevator Connector into the Elevator a 4 5 Hs 4 Join the Blade Connector into the Elevator Connector q 4 o 4 5 Install an appropriate Lift set 1 Q Lift Set_ Note Lift set is inside of the box Chung s Retractor 201 User Manual 02 6 Using the Elevator Handle adjust height as needed I 7 Sterilization Parameters Method Autoclave Cycle Pre vacuum Temperature 270 272 F 132 134 C Minimum Exposure Time 4min Average Dry Time 10min WARNING The use of flash sterilization is not recommended WARNING Do not sterilize2. at temperatures over 285 F or 140 C Chung s Retractor 201 User Manual 03
Download Pdf Manuals
Related Search