CoolTab-722 7" (18 CM) TABLET WITH ANDROID™ 4.2 User Manual
Contents
1. xx Do not insert and remove USB disk repeatedly in a short time otherwise the USB disk may be damaged 2 Using SD card he device supports storage card of up to 32GB Insert the storage card into the card slot and press it down with your finger the message Preparing for SD card will display on screen When this message disappears it means the TF card is ready and you can use it Removing SD card Close all applications or files on the card Wm Click Settings SD card Remove SD card Press the card softly and it will be ejected Then move it out Do not insert and remove the card repeatedly in a short time otherwise it may be damaged We recommend you use a card of famous brand so as to avoid incompatibility 17 Downloading installing uninstalling applications You can find many free interesting Android applications in the internet Just open the The Android applications you purchase or download can be installed through browser and search for Android applications File manager in a fast and easy way Copy the apk file you want to install to SD card or USB disk Insert the card or connect USB disk to the device Click File manager icon Click El or Ea and find the folder in which apk file is saved select a apk file Install After installing the icon of the application will display in the interface where all applications are displayed Click to run the application directly or2. POC AUIS nennen renden eneen 19 Dear customer Thank you for buying this Lenco product Quality and usability is our top priority In order to let you fully enjoy this tablet we have manufactured this product using high quality standards materials components and care A Please read all safety instructions and national restrictions before you use this tablet Note This user manual was printed prior to the development of this product When operability or other functions needed improvement priority went to the product specification itself and not to this manual In such instances the instruction manual may not entirely match all the functions of the actual product Therefore the actual product and packaging as well as the name and illustration may differ from the manual The screen shown as an example in this manual may differ from the actual screen display Lenco is not liable for any consequential damage Power on off Power on press and hold the power key for 5 seconds Power off press and hold the power key for 5 seconds click Power off click OK Lock unlock screen press the power key to lock unlock the screen Forced shutdown in case of no response of the device press Reset key to reset the device by force Note do not use forced shutdown unless necessary Shut down the device following power off steps Reset key press this key to reset the device Using touch screen Single click click an icon to select the
3. click Complete to return to File manager interface Downloading and installing application from internet You can download Android applications from internet or other e market directly and install them into your device quickly and conveniently Click Browser icon to connect to internet Enter address and click the download link of the application you want to download to the device After downloading click and hold the download file in download record interface Click Open Install Uninstalling applications You can uninstall any installed Android application conveniently 1 Click Menu Settings Applications Manage applications 2 Click the application you want to uninstall Uninstall 3 Click Yes to uninstall Connecting to PC 1 Connect the device to a PC and then this device can be used as a mobile storage device When using a USB cable to connect to PC connect one end of the cable to the USB OTG port of the device and the other end to USB port of PC After connection the device will prompt icon EE and click it and select 18 f then select Enable USB device then you can save data to the device via PC as shown in the following picture USB Mass Storage USB storage in use re turning off USB storage make sure you have nted ejected your Android s SD card from your computer Turn off USB storage 4 Turn off USB storage Charging Connect one end of the power ad
4. input account name 9 Input name to display when sending message Click Complete x After setting if you cannot connect to a free email account please confirm with your email provider if their server supports POP and SMTP or not Inbox La he 1 Click B Email icon 2 If you set only one email account it will open directly If you set more than one email accounts you will see the email account list 3 Click the email account you want to open Click Inbox 12 Opening an email 1 In Inbox interface click an email to open it 2 Click an attachment if any to enable a corresponding application to open it or you can click Save to save it to SD card 3 If you want to Reply Click Reply or Reply all a Enter the message you want to reply in Writing email option b Click Send to send the email you can also save it as draft without sending it The email will be deleted if you dont save or send it 4 To delete an email click Delete Writing a new email 1 In Inbox interface click Menu Write 2 Click Send to option then enter address of the Receiver 3 If you want to cc or bcc to other receivers click Menu Add cc and bcc then enter the email address of the receiver Enter the subject in the title bar Click Write an email option to enter your personal information lf necessary click Menu Add attachment to add attachment files When you complete writing click Menu Send oa a Editing email accou
5. option you require Press and hold select an icon and hold to drag it to the desktop Drag drag on the desk to switch among different interfaces x To avoid scratching or damaging the screen never put anything on it Interfaces 1 Desktop 1 View all applications 2 Google search 3 Return 4 Return to desktop 5 Shortcut key for screen capture 6 Browser 7 Camera 8 File manager 9 Shortcut key to volume 10 Shortcut key to volume 11 Music applications 12 3G WIFI status 13 Battery status 4 Time display lf the tablet is not used for a long time press Power On key and enter standby mode There are two standby modes One is sleeping mode at this time the screen is off Press Power On key again to enter nap mode as shown in the picture Google In this mode click and hold Lock unlock icon there identifiers at A B C positions will appear as shown in the picture In this interface Camera icon is at A position Unlock icon is at B position and Google icon is at C position The system will prompt you the currently activated path as shown in the picture the ripples at B position show the activated path You can click and drag the Lock unlock icon to B position to unlock the screen to A position to activate the camera or to C position to activate Google browser Operating programs 1 Player 1 Click to enter player interface 2 Select a video file to play and the system will enter video playi
6. Hz and is designated only to be used inside a normal household environment This product is suited for this purpose within all EU counties AIll rights reserved 22
7. Lenco CoolTab 722 Table of content POWE ON ON neee deens eene edentate 3 Using touch SCHEEN nnn nette dede te 4 LAE ET E SeeSee 4 Das DESKTOP ee E E EE ES 4 2 Locked screen naan eneen eneen en eenen venen venen venen venen venen venen 5 Operating programs anna nen oen nen ene nenenenenenennnene ennen vennen eneen ennnenenn 6 PIVOT oomen ata EA EE E EEEE EE EEE EEEE 6 2 MUSI a E ead E E 6 3 Recorder an oann eneen eneen en ennen ennen eenen venen senen venen venen venen venenvenen 7 A GCIM 2 ere eee eer 8 Bs ROW En 9 De PIAV SOL oenen E ee eee 9 7 NON AE eneen een 10 Oe OG eneen dende 10 Jt CalCUIAtOF eeens 11 10 OW MIO ACA senen E E EE EES 11 11 Map OONO 11 12 EMA ea EE EA EEEE EEEE ENEE 12 13 File manager nnvran en enrn eens venen enen ennn rener enen ennn venerenenenen 14 Settings nan oaaan enn een eneen ene nenen ennen vennen vensenvenensvenens venen vsnnenesnnenenn 15 Wi Fi settings oan onan en enenennereneneneneenerenenennneenerenenenenvenenenenennnven 16 SG SCIOS eeen eeen detentie daneen deden ten 16 USe Or eKrIended Storage rears neee nend 17 1 Using USB ISK neteenntennternsbeceentanneenbeeneenedadheen tanende annae 17 2 USG SD CAE ennen eneen teater deedeetee neten 17 Downloading installing uninstalling applications 18 Connecting to PG sr veerekeeeneeeenekeneennskennene a ndsakebensesehnkanehelkendeiene 18 GMAT enen aeron EEEE ne oe oe 19
8. amera mode you can view the pictures in thumbnail mode up to nine pictures For system ver 4 2 you can return to camera interface and you can drag the interface to the front to display and go on taking photos without needing to click other keys to return camera status Press return key or desktop key to exit from camera Recording video Tap E to switch to the video mode Tap to start recording Tap io stop recording All videos are saved automatically Tap on the thumbnail to view the movie Move the 0 towards the to zoom in LO Press to change to the front or rear camera 5 Browser Click icon to enter browser interface amp Google _ s 3 E ws 4 http www google com Reloads page if the page can t be reloaded this changes in an X 6 Browser options o 8 _ Activates an URLfield 9 _ Saves the current web address as favorite Note The system ver 4 1 includes Google browser You will be asked to select browser mode when using it for the first time and you can select any one you like O The new browser icon is BEEZ 6 Play store Open to view and download applications When running play store for the first time you will be asked to login with your Google account if you don t have a Gmail account apply for one at http gmail google com 7 Calendar Click Basa Calendar icon When running the calendar for the first time you will be ask
9. aptor to socket and the other end to the power socket of the device for charging During charging the icon of battery will be ES and when charging completes the icon will be Kas You shall not charge the device via a USB cable You can still use the device while charging but this will prolong the charging time e Use the device at least once every week e Fully charge the battery regularly e Don t keep the battery empty for a long time Precautions Please observe the following safety precautions when using your device e Do not expose the product to rain or humidity directly e Keep the device away from direct sunlight or heat source e Protect the power cable When connecting the power cable do not step on it put anything on it or press it by force Pay special attention to protect the plug of the power cable e Please use approved power adaptor for charging use of other chargers may damage the device Never disassemble or repair your device without authorization Always touch the screen with care If you want to clean the fingerprint or dust on the screen please use a soft cloth such as lens cloth but do not use a coarse cloth e Pictures in this manual are for demonstration purpose only and may differ from the real product 19 Keep your personal and important data safe While using your tablet be sure to back up all your important data Lenco is not responsible for any loss of data When you want to dispose
10. e storage device 2 Click and hold the file or folder you want to copy click Copy Deleting a file Click and hold the file or folder you want to delete Click Delete 14 Settings Wireless network Wi Fi set and manage wireless access point refer to WIFI setting for details Set and manage Bluetooth signals Enable and click name of Bluetooth Bluetooth device ensure the device to be detectable by all This function is Bluetooth devices nearby After that all Bluetooth device optional nearby can be searched Traffic __ Set and manage data traffic Portable hotspot Set WIFI hotspot Ethernet Configure wired network Configure VPN network Mobile network Set 3G network refer to 3G settings for details i Ener savin mode mode Adjust volume of media alarm clock and notification Click Volume and side EN T and then click OK Device Energy Notifying ringtone Select the notifying ringtone you want Screen lock prompt tone Prompt tone when screen is locked unlocked Brightness Click and slide mn o to adjust brightness and then click OK Display Wallpaper Set wallpaper Adjust sleep time Adjust font size in the interface Storage Display storage status Battery Display battery status User Display user s information Personal Location information Display my location and source of location information access power Securit Screen lock Set scree
11. ed to login Enter your email address and password click next and complete the settings according to the guide Then you can use the calendar New event 1 In Calendar interface click the date you want to add a new event to 2 Select the time of the event Input the details of the event in each field 3 Click Complete 4 Press Menu key to select the calendar interface you want Date showing in gray means there is an agenda 8 Clock Click Clock icon You can view the current date and time Alarm clock You can set more than one alarm clocks at the same time yx When icon appears on the screen it means at least one alarm clock is activated Adding alarm clock 1 Click Ba Clock icon 2 Click menu Add alarm clock 3 Set the alarm clock you require x If Repeat is not selected the alarm clock will be deleted after alarming 4 Click Activate clock 5 Click Complete Closing alarm clock When the set alarm time reaches a window with the name of the alarm clock will pop up If you want the clock to alarm again in 10 minutes click Pause and alarm again Click Cancel to stop the alarm 10 Activating alarm clock lf the alarm clock is set to repeat you may want to pause the alarm instead of deleting it 1 In alarm clock interface click the icon kA after the alarm clock you want to activate 2 Click to reactivate Editing alarm clock 1 Click Clock icon Click B 2 Click and enter
12. he warranty period you should contact your local dealer Important note It is not possible to send products that need repairs to Lenco directly Important note If this unit is opened or accessed by a non official service center in any way the warranty expires This device is not suitable for professional use In case of professional use all warranty obligations of the manufacturer will be voided This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe To ensure the correct waste treatment of the product and battery please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries In so doing you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste Waste Electrical and Electronic Equipment Directive 21 Products with the CE marking comply with the EMC Directive 2004 108 EC and the Low Voltage Directive 2006 95 EC issued by the Commission of the European Community Hereby STL Group BV Ankerkade 20 NL 5928 PL Venlo declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at https lencosupport zendesk com forums 22413161 CE Documents This product operates at 2400 2483 5 M
13. n security protection d Set to display user s information on the screen 15 Device 1 Add or delete device manager management 2 Unknown source APK installation settings Manage application access security credentials and other Credential storage credentials Language Set default language Language Keyboard and and input input method Set default keyboard and input method method Set relevant parameters for sound function Mouse Touchpad Backup and 1 Backup restore device data Date and Auxiliary Developer About the View system status battery status legal info model Android Wi Fi settings Many functions require Wi Fi connection so we suggest you use the preset Wi Fi network B 1 Click 2 Enable Wi Fi The device will search and list all available Wi Fi networks automatically The icon next to Wi Fi means you need to enter a password to connect to it 3 Click the Wi Fi network you want to connect to if there is password you need to enter the password Click Connect After connecting to WIFI network you will see an icon F wi Settings Wireless and network on the desktop 4 Click to return to desktop X If your Wi Fi is set to be hidden it will not be searched automatically You need to click Add Wi Fi network and then enter required information to add your Wi Fi 3G settings 1 Before connecting to a 3G network make sure you are using a 3G network card supported by the device Thi
14. ng interface Click on the screen to display the control menu as shown in the following picture to adjust the video accordingly volume playing process bar previous video pause play next video screen size and return menu Note System ver 4 2 supports desktop multi menu video playing mode You can simply desktop play the video by selecting the desktop playing menu With this function more than one video can be played at the same time on the same device 2 Music 1 Click the music icon to enter player interface 2 Select the music you want to play from track album artist playlist 3 Click Previous Pause Next icons for playing 4 You can click to go back to previous interface or click E B to return to desktop while keeping the music playing The interface is shown as below Tragedie 3 Recorder Click icon to enter recorder mode see the picture Click LL to start recording and click to stop Click to play the recorded audio The recorded files are named according to the recording time You can select any one to play In the above picture the finger shows the sound wave intensity and the time shows the recording time 4 Camera The camera can be used to take pictures or to make video s Taking pictures Tap to take pictures All pictures are saved automatically For system ver 4 2 you can drag the taken photo to enter the album directly When entering the album from c
15. nt PN 1 Click Em Email icon 2 In Inbox interface click Menu Account setting 3 Set your email account according to your needs Gn 4 Click to return to Inbox interface Deleting an email account Xf you have more than one accounts and if you delete the default account the next one in the list will become default PN me _ k Click Bm Email icon In Inbox interface click Menu Account Click and hold the account you want to delete In the popped up Account option window click Delete account Click Yes to confirm to delete oh oe eaS Setting default account You must always have a default account Therefore if you have more than one email accounts you can select one as default 13 PN hed 1 Click Bm Email icon 2 In Inbox interface click Menu Account setting 3 Click Default account to select it lf you delete the default account the next one in the list will become default 13 File manager Click USB disk and you can install Android applications to your device in a fast and convenient way File manager icon to view all files saved in the device internal storage SD card Internal Storage m Sdeard 14 items drw Copying files between devices You can use file browser to copy files among external storage internal storage and PC To copy a file into the device you must firstly copy it to SD card or USB disk 1 Click B or Ea to display files saved in th
16. of your tablet back up all data and then reset your tablet to prevent misuse of your personal information Carefully read the permissions screen when downloading applications Be particularly cautious with applications that access many functions or access a significant amount of your personal information Check your accounts regularly for unapproved or suspicious use If you find any sign of misuse of your personal information contact your service provider to delete or change your account information In the event your tablet is lost or stolen change the passwords on your accounts to protect your personal information Avoid using applications from unknown sources and lock your tablet with a pattern password or PIN 20 Service and support For information www lenco com For support http lencosupport zendesk com Lenco helpdesk Germany 0900 1520530 Local charges The Netherlands 0900 23553626 Local charges 1ct p min Belgium 02 6200115 Local charges France 03 81484280 Local charges The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM When contacting Lenco you will always be asked for the model and serial number of your product The serial number can be found on the back of the device Please write down the serial number below Model CoolTab 722 Serial number Lenco offers service and warranty in accordance to European law which means that in case of repairs both during and after t
17. s device only supports external USB 3G network card 2 After installing a SIM UIM card to 3G network card install the 3G network card on USB OTG connection wire and then connect to the device 16 3 After 3G network card is connected click network More Mobile network for 3G network settings 4 Enable mobile network tick Enable data traffic Data roaming then select Access point name select Menu and select available network for 3G network access 5 General device can be used directly but for a few devices APN needs to be created and network access shall be set before use Settings Wireless and Take China Union 3G network for example the settings are as following Name 3GWAP APN 3gnet Proxy Not set Port 80 Username Not set Password Not set Server Not set MMSC Not set MMS proxy Not set MMS Port Not set MCC 460 MNC 01 Authentication type Not set APN type Not set APN protocol Not set After setting you will be able to connect to 3G network After connection you will see the icon Pd in the screen When this icon is gray it means the system is searching for network and when it is blue it means the network is successfully connected The icon ad means there are data in transmission Use of extended storage 1 Using USB disk Insert the USB disk into OTG connection wire then insert the OTG connection wire into the USB OTG port of the device You can use the U disk when it is ready
18. the alarm clock you want to edit Edit Deleting alarm clock 1 Click Clock icon Click B 2 Click and enter the alarm clock you want to delete 3 Click Delete alarm clock Click 9 Calculator 1 Click Calculator icon 2 Click numbers and operators to calculate 3 Click Clear to clear the input one by one or click and hold Clear to clear all inputs 10 Downloading 1 Click ha Download icon 2 You can view the downloaded software and select one to install 11 Map X To use this function make sure you have an Internet access SF When there is an internet access click icon EB to open the map where you locate You can search for the information you want as shown in the picture 11 Me oe 8g tik bd s a ns 2000A Sy kA T 500K xP ve 2012 Google tE 2012 Mapabc gt ai f 7 12 Email xPOP3 and SMTP are supported Adding email account You can enter one or more email addresses you want to use on the device 1 Click Email icon 2 In Your account interface click Next 3 Click Email address option Input your email address 4 In Password option Input your account password 5 Click Complete 6 Manual setting optional the server will select provider gmail com etc automatically according to your email account However if you want to change server settings you can click Manual setting and make changes 7 Click Next 8 Optional
Download Pdf Manuals
Related Search