USER MANUAL
Contents
1. OPERATING DETERMINATIONS If this equipment is operated in any other way than those described in this manual the product may suffer damage and the warranty becomes void Incorrect operation may lead to danger e g short circuit burns electric shocks lamp failure etc Do not endanger your own safety and the safety of others Incorrect installation or use can cause serious damage to people and property Technical Specifications You should find inside the Equinox carton the following items 1 Equinox light fixture 2 User manual Sound sensitivity control Blaze only To adjust the sound sensitivity turn the sensitivity control knob to the desired sound level The unit will now respond to the music in accordance to the sound sensitivity setting Auto run Mode Warp only To set the unit in the Auto run mode simply set the switch on the rear of the unit to AUTO The Unit will now run through it s built in programmes Sound active mode Warp only To set the unit in Sound active mode simply set the switch on the rear of the unit to SOUND ACTIVE To adjust the sound sensitivity turn the sensitivity control knob to the desired sound level The unit will now respond to the music in accordance to the sound sensitivity setting Overviews Blaze SOUND ACTIVE CER O O AUTO RUN SENS CER MIC M WWW PROLIGHT CO UK WWW PROLIGHT CO UK Ic AG 240V AC 240V O o EQUIN X O EQUIN xX O2. the equipment e Do not connect this equipment to a dimmer pack e Do not switch the equipment on and off in short intervals as this will reduce the system s life e Only use the equipment indoors e Do not expose to flammable sources liquids or gases e Always disconnect the power from the mains when equipment is not in use or before cleaning Only handle the power cable by the plug Never pull out the plug by pulling the power cable e Make sure that the available voltage is between 220v 240v e Make sure that the power cable is never crimped or damaged Check the equipment and the power cable periodically e If the equipment is dropped or damaged disconnect the mains power supply immediately Have a qualified engineer inspect the equipment before operating again e If the equipment has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation might damage the equipment Leave the equipment switched off until it has reached room temperature e If your product fails to function correctly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Prolight dealer for service e Only use fuses of same type and rating e Repairs servicing and power connection must only be carried out by a qualified technician THIS UNIT CONTAINS NO USER SERVICEABLE PARTS e WARRANTY One year from date of purchase
3. EQUIN X www prolight co uk USER MANUAL EQUINOX BLAZE EQLED35 EQUINOX WARP EQLED36 Safety WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP CAUTION Keep this equipment away from rain moisture and liquids SAFETY INSTRUCTIONS Every person involved with the installation operation amp maintenance of this equipment should Be competent Follow the instructions of this manual CAUTION TAKE CARE USING THIS EQUIPMENT HIGH VOLTAGE RISK OF ELECTRIC SHOCK Before your initial start up please make sure that there is no damage caused during transportation Should there be any consult your dealer and do not use the equipment To maintain the equipment in good working condition and to ensure safe operation it is necessary for the user to follow the safety instructions and warning notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty Safety IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the equipment e Never let the power cable come into contact with other cables Handle the power cable and all mains voltage connections with particular caution e Never remove warning or informative labels from the equipment e Do not open the equipment and do not modify
4. O O Features Plug and play unit producing a unique room filling effect Auto Run function Warp only Sound Activation via built in microphone Sound sensitivity control Blaze Specifications Warp Specifications e 18 Ultra Bright 5mm LEDs R 6 G 6 B 6 e 64 Ultra Bright 5mm LEDs R 24 G 16 B 24 e Power consumption 5W e Power consumption 8W e Power supply 240V e Power supply 240V e Dimensions 238 x 176 x 211mm e Dimensions 238 x 176 x 211mm e Weight 1 8Kgs e Weight 2 1Kgs
Download Pdf Manuals
Related Search