USER MANUAL PCE
Contents
1. Fre After choosing position option usually several 2 Pa u L a jz Z options show up MODE on turning on selected option OFF turning off out out to menu Ak on Accelerated working with menu Faster menu options moving is enabled by using key MENU RS ZERO TARE I ns E a Ey PCS MODE SELLP a mic Immediate out to previous menu level is done by using key USER MANUAL gt 06 md NET el o MENU o ZERO TARE wr gt 20 ud BIG 200 a UNIT MENU ok ZERO TARE E 8 gt 08 Pd NET 8 In Q lt a MENU m RS ZERO TARE I ban 8 306 md pe ze m o MENU E ZERO TARE tn jc 8 8 ELLET 20 mid im Q o Be UNIT MENU m RS ZERO TARE I ban 8 8 PCC gt 06 mid aa pes MENU BRS ZERO TARE ums key working method During standard weighing key is used to switch between net and gross indication When special function e g PCS is turned on using key enables to go back to standard weighing mode Sign o on the left side signalizes that special function is turned on and user can go back to function mode by pressing key USER MANUAL Inscribing numerical values MODE Inscribing numerical values is needed in some am special functi2. 100 er PCE fo T a PE E Y Per off 5 pr m 20 ad NET 00 gt 30 mid NET u ja I at a Note This function allows displaying weighing result in percents A measurement is performed in two phases first phase weighing a reference sample 100 second phase measuring specific sample as a percentage of the reference sample Weighing result is displayed in different format depending on the weight value of reference sample The function has the following options PEr oFF disable the function PEr on set current scale indication as 100 and activate percentage weighing out exit without changing settings 1 PEr Err message informs that reference 100 mass is less than 0 5 Min or was not defined 2 In scales with LCD display sign is replaced with USER MANUAL 17 4 Label choosing function LAbEL This function is used in scale with ELTRON SErIAL function data protocol This protocol enables label printout with actual scale indication and chosen data from Print special function variable data for example date and time Other data for example company address product name barcode can appear on label as a constant text Label patterns with number 4 digit used by user should be saved in scale memory according to printer manual Label pattern choice is made by inscribing label number using LAbEL function Press button a ee When LAbEL
3. leave without changes bf ae bA Wal gt 06 mud UNIT MENU RS ZERO TARE An attempt of charging ordinary batteries can cause serious damage of the scale USER MANUAL 17 14 Automatic switching off the scale function AutoOFF gt 06 md UNIT MENU oO RS ZERO TARE r MODE AukamfF MODE AF aFF l MODE HoF um MODE AF bAE N 5min The function is helpful in scales supplied from accumulators The function causes scale to switch off automatically Press key When AutoOFF is displayed press key The following options appear successively on display AOF oFF deactivate function AOF on activate function scale turns off after 5 minutes of not making any actions AOF bAt as above but only when supplied from accumulators Out out without changes USER MANUAL 17 15 Statistical calculation function StAt This function evaluates from series of measurements max 1000 statistical parameters of weighting process Adding successively measurements to register is automatic and it occur after the scale is loaded and its indications stabilize After each loading printout is made with number of measurements result date and time if clock is installed and the function is activated For the obtained measurements series the scale evaluates n number of samples sum x
4. Ir lif on i pcs Pep PCS 00 PES SEE PC APL PES 5 nn z Ber 1 This function enables to count identical pieces e g turnbuckles or buttons A measurement is performed in two phases first phase single piece weight calculation on the basis of defined pieces amount 5 10 20 50 100 200 or 500 pieces second phase pieces counting First phase options PCS recalling of a value inserted earlier this quantity must be inscribed earlier PCS SEt set any amount of pieces in a sample PCS APW set unitary mass directly PCS rS inserting number of details in a sample and receiving of their mass from other scale connected by RS 232C It is advised that single piece weight is not less than one reading unit and sample weight used in first phase is bigger than 100 reading units To leave function press key and then ing ffm key choose PCS and PCS oFF APW too LOW communicate signalises that a sample was not put on the pan or if single piece weight is less than one tenth readout plot counting is not possible APW LOW communicate signalizes that single piece weight is more than one tenth but less than one readout plot counting possible but with bigger errors result blinks In scales equipped with LED display pcs sign is replaced with USER MANUAL 17 3 Percentage weighing function PErC
5. N PCE SD Serie USER MANUAL File 2014 09 01 BAC 132 bE0100 GB USER MANUAL 1 General description SD series platform scales are destined for general use All scales are metrologically tested calibration or legal verification on demand SD series scales are made in two main versions with LED display basic and with LCD display option Scales have following verification features a seal protecting scale casing against opening notified body stamps and green metrological marking placed on the balance name plate Legal verification is valid for 3 years unless the seal is broken NACE classification 29 24 23 Certificates Certificate of type approval no T7950 2 Completeness Standard set consist of 1 Indicator Column with 3 pcs screws Platform Feeder User Manual Guarantee card Nee USER MANUAL 3 Keys and indicators LCD display version zero stabilization net weight weighing metrological indicator indicator indicator result data bar indicator OFF BAT CAL AUT TOTAL joy _ MIN OK gt 04 uud NET ern en scale keys ZERO TARE Keys switch on switch off standby tare subtract package weight from weighed mass zeroing when the platform is empty result printout menu function switch net weight gross weight Indicators 0 zero indicator unloaded scale aL result stabilization indicator i NET net weight after
6. Std mode not Found barcode from outside the base not accepted LIMIt mode Found product barcode found in database and data recalled Attention If the scale doesn t indicate any communicate check barcode reader connections port configuration and transmission protocol SEFIAL function Other fast way is to press and hold MENU key Prod Id communicate indicates and after a few seconds user can inscribe identification number If the number is already saved in base Found communicate appears and all the product data is recalled To edit data choose Edit option and use following keys increasing digit next dixit end of inscribing Product recalling is also possible by using Prod and Prod Id options previous site USER MANUAL Weighing results and data transmission from scale to computer or to printer To each weighing results transmission a set of product and user identification data is added The set is activated in Print option Available data from products and users base Print SEtuP option USEF Id user identification number USEr nA user name inscribed from PC or scanner Prod Id product identification number Prod bA product barcode inscribed or scan Prod nA product name inscribed from PC or scan USER MANUAL 17 2 Pieces counting function PCS UNIT MENU RS ZERO TARE ar 20 ud NET Fie
7. ERFE TER USER MANUAL 17 Special function description All scales besides basic metrological functions weighing and taring have a set of special functions Depending on meter type functions set differs Below a list of functions available in standard ME 01 type meters Products data base Prod Users data base USEr pieces counting function PCS change of mass unit Unit percentage weighing function PErC selecting label number function LAbEL weighing large animals function LOC entering tare function tArE maximum value indication function UP force measuring function nEWton Statistical calculations StAt paperweight calculation function PAPEr OvuOOOOUDOOOOCUOD an functions that require additional equipment to be completely functional option with accumulator supply Setting accumulators charging bAttErY Automatic switching off scale function AutoOFF options with the clock setting current date and time function dAtE total weight function fotAL options with the transoptors connectors WY LI checkweighing function thr option with radio connection function of choosing communication channel rF Chn LabEL function is available in scales with EPL or EPL A transmission protocol activates go to SetuP SErIAL In scales with LED display special functions don t have additional marks on display and names of some functions are shortened USER MANUAL 17 1 P
8. ODh OAh Setting threshold 2 value option Computer Scale S H D1 DN CR LF 53h 48h D1 DN ODh OAh D1 DN threshold value maximum 8 characters Scale gt Computer without response Setting threshold 3 value option Computer Scale SM D1 DN CRLF 53h 4Dh D7 DN 0Dh OAh D1 DN threshold value maximum 8 characters Scale gt Computer without response Connecting cable WK 1 scale computer 9 pin interface SCALE COMPUTER lo 26 34 do 54 o 70 8o Connection cable WD 1 connects scale with PCE BP 1 printer SCALE KAFKA PRINTER lo 20 34 fo 54 o 70 do Setting of internal swithes of PCE BP 1 printer USER MANUAL 11 2 Detailed EPL protocol description Transmission parameters 8 bits 1 stop bit no parity baud rate 9600bps o After using jams key in scale Scale Label printer set of instruction in EPL 2 language that initialize label printing US Steering instruction FR 0001 Label number define instruction Instruction that starts list of variable signs mm gg 5 signs minutes hour rrrr mm dd 10 signs year month day masa 10 signs scale indication mass unit P1 Steering instruction Attention a Except variable signs constant signs can also be inscribed e g factory name product name and so on b In standard only one label pattern is possible to printout number 0001 Using bigger amount of patterns other label numb
9. USER MANUAL 16 3 Weight unit selection Unit The function allows selecting weighing unit CarAt 1 ct 0 2 g carat MGrAM 1mg 0 001g milligram lo KGrAM 1kg 1000g kilogram Pound 1 lb 453 592374g English pound OunCE 10z 28 349523g ounce MODE OunCEt 1ozt 31 1034763g pharmaceutical ounce GrAln 1gr 0 06479891g grain PennYW 1dwt 1 55517384g jewellery mass unit GrAM 1g gram 306 ud OD kg 7 ol ee nim rm rc c ga GE IE Se 5 gt rr GE i AR MODE MODE PGE APT gt HG AM w Pound pa nl E ounlE E Erin MODE PE andbl The way of choosing carats as weighing unit is shown on the example Attention In scale with LED display designations of mass units lb kg oz ozt ct are not displayed Units are pointed by diode light MODE API o USER MANUAL 16 4 Serial port parameters setting SErlAL The function allows setting independently communication parameters of both of serial ports Port 1 and Port 2 executed in RS232C RS485 Il USB or LAN standard transfer protocol Prot LonG cooperation with printer or computer 20 u UNIT MENU Oo RS ZERO TARE Fan m EPL cooperation with label printer in normal mode MODE activates LAbEL function CEL 1 EPL_A cooperation with label printer in automatic SEEM Th mode activates LAbEL f
10. ZEro scale start zero inscribing factory zero dEFAULt restore default settings for all options SErVICE options only for service out exit USER MANUAL 16 Scale setup SEtUP SEtUP contains all options used for setting scale work mode mM a MEnu creating personalized user menu a CALIb scale sensitivity calibration D UNIT MENU m RS ZERO TARE i AutoZEro ing self maintaining zero indication unloaded scale Unit weight unit selection SERUP SErIAL setting serial ports MODE Print transmission printout data selection DIE an FILtEr anti disturbance filter MODE b_LIGHt backlight setting iz Pa l Ad420 analogue out configuration SS FirMW are updating software only for service E Al dEFAULt reset to factory settings sample of uk Fant I E b using in chapter 15 ce oO O O0 0 O 00 SErVICE service menu only for service m be mi dE bL CHE AnALOE JEFRULE SEru ICE USER MANUAL 16 1 Scale calibration CALIb Press key PCE Io Press key when CALIb appears I ar The following options will be displayed CAL on calibration with external I recommended standard of mass see technical rec data al E Li j CAL StP calibration with external weight MODE confirmation of succesive steps key r Pe L out lea
11. a platform to avoid dropping weighed objects on the pan A N Do not overload the scale more then 20 of maximum load Max 6 Protect the scale against dust aggressive dusts and liquids To clean the scale wash it with water with soap and dry it afterwards 7 A scale equipped with lead acid accumulator automatically controls accumulator state signalises its discharge on LCD display and after around 1h a scale switches itself off to avoid discharging the accumulator below threshold voltage N Do not discharge an accumulator because it can be damaged After discharge signalising appears an accumulator should be charged as quickly as possible by connecting external feeder Charging is more effective when scale is turned off with o key then charging time is about 10 hours It is also possible to connect accumulator directly to PA6V charger leaving accumulator in a scale or take it out if needed In order to take accumulator out take off a pan disconnect accumulator wire and unscrew mounting screws USER MANUAL 8 Balance checking It is advised to check scale indication accuracy before and after series of measurement using any load with known weight To check the scale with legal verification use a calibration weight with valid calibration certificate In case permissible error is exceeded it is advised to contact the nearest service to calibrate the scale 9 Scale adjustment To adjust a balance it is necessary to break pr
12. back to total weighing without 1 r Ta zeroing total register press key several times a g MODE TOTAL Hy l MODE TOTAL 5 HE kg USER MANUAL To leave the function with clearing total register select totAL function from menu and choose tot oFF option Scale prints the communicate informing about clearing registers The form of receipt after each measurement Date es Time measurementno weight measurementno weight Report form Date Time TOTAL WEIGHT NUMBER OF SAMPLES AVERAGE VALUE Note When the scale doesn t have an internal clock Date and Time do not appear on printout Maximum number of measurements is 99 999 Maximum total load 99 999 000d The weighing unit of the total value from the register Total is the same as the weighing unit stated on the keypad or is 1000 times greater what is signalled by o indicator at the left of the display If the registered value is too big to be displayed E communicate appears on the display If the number of series is too high and cannot be displayed Err1 communicate appears on the display USER MANUAL 17 10 Checkweighing function thr This function allows comparing weighing result with two programmed reference values lower and upper threshold Comparison result is signalled with indicators MIN OK MAX and sound signal generated when threshold values are exceeded If comparison result is smaller th
13. be greater than life scale capacity It allows calculating total weight as 9 well as average value 306 mud 100 UNIT Menu Rsa ZERO TARE oat jc teenies Press key When totAL is displayed press key k ak AL h The following options will appear successively tot Prn report printout without clearing total register ak j m totoFF clearing total register report printout 4 a and leaving the function L z l E E tot working with receipt printout after each m m ee measuremert MODE tot working without receipt printout I tot CFG saving measurement mode using key Manual after taking off the load auto ns pe Press ffm key when fof is displayed E ak Perform measurement series by pressing key MODE for storing results into total register In order to print and display results enter the function by choosing fotAL and tot Prn option from menu 20 mad MA I a oo The results are displayed in the following m sequence Lit kg total weight SUM i 5 number of registered measurements n MODE average value l A l rh regarding that moving to display successive result punting iis is performed after pressing jar key 20 md GT a A MODE Attention In scales with LED display SUM sign is i Fa l j rm ig replaced by MODE TOTAL vo In order to go
14. choose proper memory FFE cell where tare will be stored tAr 01 02 10 k Hr um Choose inscribing method wooe MAnUAL inscribing using keys ie Efe PTI Pan inscribing mass value that is on the pan MODE LAr SEL MODE After storing tare the scale starts working with l Pa r LE Ht f inscribed tare value MODE EA E Oe l Note Tare value is stored in memory also after unplugging the scale from the mains PARAL Pani ke gt USER MANUAL Weighing with constant tare UNIT MENU ERs ZERO TARE fr Fe MODE 4 TARE KA e k ale M MODE EAr ar F mes ER MODE MODE kA SEE tAE DIO MODE kArE Oe In order to use tare value that is located in memory choose from menu tArE function and then tAr on option A list of memory cells will show up tAr 01 02 10 Cells with inscribed value are marked with o sign on the left side active value marked with A ATTENTION In scales with LED display cells with inscribed value are marked with Choose proper memory cell using ffs key tArE function is activated with chosen tare value Moreover the scale will indicate net weight weight on the pan minus tare values Using key or while empty pan causes scale zeroing and then substraction of recalled tare Minus indication will show up USER MANUAL 17 7 Maximum value indic
15. is displayed Put on successive objects on the pan remove after indication stabilization in order to add them to measurements register In order to obtain printed statistical results from measurements series press key and key when StAt is displayed and later StA Prn After printout two options are enabled rESET erasing results Contin continuation USER MANUAL Pressing key printouts estimated values and histogram STATISICS Nominal nominal value NOMIRAL 58 080 Tolerance accepted value in percentage TOLERANCE 188 HAX HO sa N number of sample IN TOL number of samples in toleranc NO SAMPLE TOL NOM TOL 10 887 3 it i 28 125 3 28 126 3 38 285 3 38 294 9 38 281 3 48 397 9 TOL amount of measurements under allowable lower value TOL amount of measurements above ne CT A and Bett bene allowable upper value TOTAL sum of weights of all n samples AVERAGE average weight as Total n MIN minimum weight in n samples H 25 IN TOL 2 TOL i a MAX maximum weight in n samples gt TOL TOTAL 264 664 9 AVERAGE 38 587 9 ST DEV standard deviation HAX 1 1314 KIN 16 067 amp HAX IN 81 124 3 ST DEV 20 6480 ST DEV standard deviation percentage ST DEV 48 82 To finish work with this function and zeroing result register press key and then when StAt and Sta oFF is displayed press button Statistics function coope
16. is displayed press key I Hh f Actual label number will show Zr S To enter new label number press key MODE to exit function without number change press increasing digit MODE To inscribe label number use keys next dixit end J After entering label number putting load and ois s pressing key will cause sending data to Im label printer 17 Data format sent to label printer label nr 1 language EPL 2 31 MODE US 55 53 0D 0A FR 0001 46522230 30303122 0D 0A 00 00 30 30 3A 30 30 0D 0A 2000 00 00 32303030 2E 30 30 2E 30 30 0D 0A 10 g 20 20 2020 20313020 2067 0D 0A fh P1 50 31 0D 0A pan a 3F OD 0A 35 MENU USER MANUAL 17 5 Weighing animals function LOC The function allows weighing animal moving on the scale 20 mud kg o UNIT MENU m RS ZERO TARE r Ir Lo MODE L aFF LDE on MODE LOC Pen MODE gt 06 mm UNIT MENU RS ZERO TARE fa lif LOL w gt 06 md TARE Pr ink HOLD gt lt mou liko Important notes Press Fj key When LOC function is displayed press key The following options appear on display successively LOC oFF leave the function LOC on automatic weighing after loading the scale LOC Prn the measurement initiated manually
17. pan indicator Zero d2 d4 Max Max USER MANUAL Notes
18. using key j MODE special function menu turning on indicator B G gross weight after using TARE and Fa key AUT autotare function on T tare memory function on TOTAL FILTER SUM special functions indicators ct n g m2 Ib mg unit indicators pcs pieces counting indicator i n measurements quantity indicator total function f OFF scale turned off standby g MIN weighing result under threshold thr function j OK weighing result between threshold and II MAX weighing result above threshold Il BAT battery discharge indicator A O ACtIV function indicator bar indicator scale load indicator 0 100 USER MANUAL LED display version zero stabilization net weight weight metrological indicator indicator indicator result data 30 STABLE NET olg 0 kg ok O o Ib e 2 unit O oO oO O W1 W2 HOLD TOTAL FUNC PCS 3 B o E io BZ z i c HIS ta He Z Indicators lt m j NET g W1 i W2 HOLD FUNC PCS g kg Ib unit g MIN OK MAX UNIT gen RS ur Ifo scale metrologicaldata keys switch on switch off standby tare subtract package weight from weighed mass zeroing when the platform is empty result printout menu function switch special function weighing zero indicator unloaded scale result stabilization indicator net wei
19. AL Inscribing data to base 20 ud Da OD 0 MENU RS WER TARE wara 0m 0 00 MODE Ef tk MODE SEE m MODE ZERO mM Peed id Prad hA Prod nA SD L SS BEN pam rr a ta a rm khe LO the Hi Au rm 2 Gi E e ZERO TARE MENU TARE Prod and USEr options enables adding and deleting product and user data For products database available options are Edit Add add product to database dEL OnE deleting single element from database dEL ALL deleting all elements from database dAtAb changing working mode with database default mode Stb e Stb searching products in database and working with products outside the base if product is found then Found communicate appears and all product data is recalled if there is no product in database then no communicate appears the scale stores id barcode number temporarily in memory and enables to send it to the port to printer computer together with actual weighing result e LIMIt searching through products from database if product is found then Found communicate appears and all product data is recalled if there is no product in database then not Found communicate appears Prn_P sending all products database to port To inscribe data use Edit option and keys increa
20. Computer M J CR LF 4Dh 4Ah 0Dh OAh Displaying a inscription on scale s display text communicate from computer Computer Scale SNnnXXXXXXCRLF nn displaying time in seconds XXXXXX 6 signs to display Scale gt Computer MN CR LF 4Dh 4Eh 0Dh OAh Scale tarring calling gt T lt key press Computer Scale S T CR LF 53h 54h ODh OAh Scale gt Computer without response Scale zeroing calling gt 0 lt key press Computer Scale S Z CR LF 53h 5Ah 0Dh OAh Scale gt Computer without response Scale turning on off calling I key press Computer Scale S S CR LF 53h 53h ODh OAh Scale gt Computer without response Entering to special function menu calling MENU key press Computer Scale S F CR LF 53h 46h 0Dh OAh Scale gt Computer without response USER MANUAL Setting threshold 1 value option Computer Scale S L D1 DN CR LF 53h 4Ch D1 DN ODh OAh D1 DN threshold value maximum 8 characters negative value digits dot decimal separator number of digits after dot should be the same as on scale display Scale gt Computer without response Example in order to set low threshold 1000g in scale B1 5 d 0 5g the following order should be sent L1000 0CRLF 53h 4Ch 31h 30h 30h 30h 2Eh 30h ODh OAh in order to set low threshold 100kg in scale B150 d 50g the following order should be sent L100 00 CRLF 53h 4Ch 31h 30h 30h 2Eh 30h 30h
21. an zero threshold no signal smaller than lower threshold the scale signals MIN yellow colour between threshold values the scale signals OK green colour with the short sound signal greater than upper threshold the scale signals MAX red colour long sound signal The checkweighing results can be use to control optical indicator Indication mode batching devices Batching mode Standard scale is set for cooperation with optical indicator On outputs P1 P3 Relays socket short circuit states appear as result of comparison scale indication with threshold values On the chart below output states are shown during increasing load on the scale for both working modes Indication mode Batching mode A zero thr I treshold i i P2 thr thr I the Il P3 P3 thr Il zero treshold In Batching mode on P1 thr I and P2 thr Il outputs short circuit impulses appears for time of 0 5s On P3 zero output short circuit state appears when indication does not exceed threshold value signalling zero load USER MANUAL Operation sequence gt 06 mud UNIT MENU m RS ZERO TARE r Ehe Ehr off Ehr Ar hr Pr m Yop Kon Seb SEN SER MODE MODE a MODE D MODE SEL D MIN OK MAX ma fkg ifs TARE Press key and choose thr pressing key The following options are disp
22. ar legs so that the air bubble in the water level at the back of the scale is in the middle Lock the legs with the nut ll Putthe pan J on the platform 7 USER MANUAL 12 Remove screw 8 and adjust correct angle to read scale indications Lock indindicater screw 8 USER MANUAL 7 General rules 1 Before each measurement make sure that zero indicator is displayed If zero indicator does not displayed or communicate appears press key and wait until zero indication and zero indicator appears 2 The scale is equipped with a tare equal to its range To tare the scale press key left or right Storing a tare value does not extend measuring range but only subtracts it from a load placed on a pan To make weight control easier and to avoid range overdrawing the scale is equipped with a load indicator graduated in percentages 3 Weighing result should be read when the indicator lights which signalises stabilisation of a result 4 When the scale is not used but it is necessary to be ready to work immediately it can be switched off by pressing key The scale reading system is then switched off to standby mode signalled by the indicator OFF in version with the LCD display To switch the scale on press key The scale is immediately ready to operate maximum accuracy after self tests 5 Weighed sample should be placed in the centre of the pan Place the scale on
23. ation function UP This function allows holding maximum or minimum value that is indicating at the moment E Before measurement scale should be tared Li kg Function has following options UP oFF function off Il HIGH holding maximum value LOW holding minimum value Pressing key will cause result zeroing gt 06 mud MODE Note 5i Autozeroing function and the stabilisation H a indicator are deactivated when UP function is aaa running D aCe Lie arr MODE uP HGH MODE UP Oe hd 10kg Se Drs lkg PCE Ifo UNIT MENU oOo ZERO TARE fr USER MANUAL 17 8 Force measuring function nEWton Function activation causes displaying result in force units N UNIT MENU oi ZERO TARE er iss i MODE me blk ar nella nEbu arn MODE Henr 00 gt 06 md 100 Press key Using key choose NEWto function Function has several options NEW oFF function off NEW on measurement in Newtons ArM torque measurement arm length should be inscribed in meters using l and keys Attention Units convertion from mass kg to force N is made for acceleration of gravity g 9 80665m s2 Note 1N 0 1019kg USER MANUAL 17 9 Total weight function totAL The function allows calculating total weight for series of measurements which can
24. by pressing et key Tare the scale using key if necessary and place the animal on the pan Wait until the weighing result is averaged scale display blinks Then scale will show stable averaged result and will send it through serial port The result remains on display for about 30 second 1 The loads lower than Min value are not averaged 2 In case when putting animal on scale takes more than 5s it is suggested to choose LOC PRN option measurement started manually by pressing key USER MANUAL 17 6 Constant tare memory function tArE This function enables to measure gross weight of a sample placed in a container of a known weight value stored in the memory and to display calculated net weight of the sample Tare value is recalled from the memory with or key when the pan is empty Tare value may be entered using keypad or by putting container on the pan Inscribing tare value to memory After pressing key and choosing tArE function using key the following options fkg are available i tAr OFF leave the function KES PCE IIo Ar on activate the function with the previous tare value UNIT MENU RS ZERO TARE tAr sample tare value from the pan tAr SEt enter tare value with keys d B age n MODE IE I a 5 z Out printout a setting value of tare EHrE gt 06 mud MODE Press key when tAr SEt is displayed k Fir ar r By pressing key
25. e Pay attention that supply voltage is compatible with specified technical data e Do not use the scale when its cover is opened e Do not use the scale in explosive conditions e Do not use the scale in high humidity e Ifthe scale seems not to operate properly unplug it from the mains and do not use until checked by authorised service According to legal regulations it if forbidden to dispose wasted electronic equipment in waste containers e Please return wasted scale to the point of purchase or other company specialised in recycling of wasted electronic components USER MANUAL 1 Take the scale out of the package removing protective foils 2 Take out the pan J 3 Cut bands A and remove protection elements B Attention Protections elements not allowed scale work properly 4 Hold bought indicator 2 and column 3 softly pulling connecting cable 5 Put a column 3 to holder 4 6 Lay junction cable to manner showed on drawing and put cable to interior of column Put indicator 2 on column 3 and tighten screw 5 7 Catch scale platform 7 and take out scale from package carefully Attention Unfixed column 3 can be drop from holder 4 Use hex key to drive three screws 6 in to holes on holder 4 for standstill column oe 9 Place the scale on a stable ground not affected by mechanical vibrations and airflows 10 Level the scale with the rotating re
26. e set to maximum values 2 When setting upper threshold value pay attention that its value is not below lower threshold value 3 Setting lower and upper threshold value is possible after sending appropriate orders from computer what is described in scale user manual USER MANUAL 17 11 Setting date and time function dAtE gt 06 md ur Venu rs USB ZERO TARE 0 000 JA MODE SD bis MODE dA FF MODE TARE i dP Ar dA SEE MODE dft MODE Pin dt off MODE The function allows setting current date and time of scale internal clock and mode of its use The function has the following options dAt oFF deactivate date and time during printout of current weighing result dAt on activate date and time during printout of current indication 4 key dAt SEt change current date and time dAt Pin data and time secure password to prevent from changing date and time by unauthorized personel dAt For data printout in USA or EU format The example at the left presents how to set current date and time using dAt SEt option After setting proper date and time activate it with dAt on option UE rrrr mm dd gg mm USA mm dd rrrr gg mm AM PM gg hours mm minutes AM before noon PM after noon mm month dd day rrrr year Attention Inscribing non zero PIN value causes showing PIN sign during nex
27. egulators 1 AnG mG inscribing Max value AnG CFG working mode configuration PLUS workmode for only positive values MinuS only for negative values both for both UNIT MENU RS ZERO TARE re SEEUIP Agen AnG end AnG CFS PLUS PT ews bokh USER MANUAL 16 8 Entering reference zero value ZErO Note This function is enabled in non legalized scales only ZEr0 function allows entering new value of reference zero value referred to empty pan without need of contacting with authorised service centre gt 06 md lif 5 A Press key When ZErO is displayed press key On the display a sign ZEr Cod will show up momentary and the a dash on last digit position MENU o7 To enter code in new scale 1234 use keys increasing digit Prien next digit Mk I HE hy end of inscribing The following options appear successively on display ZEr Cod enter new secure code value ZEr SEt enter new zero value ee 7 i ie Using key choose ZEr SEt Direct result from A C converter will appear on scale display When the pan is empty press key Wait for finishing zeroing process In order to change access code use ZEr Cod option as mentioned earlier fe 4 Ww MODE 7 cr dkr SEL Im an am E MODE un GA 2 rod
28. ers is possible thanks to LAbEL special function c To achieve label printout label printer must have inscribed label pattern label pattern is created on computer and using computer it is saved to label printer memory Label pattern is designed by ZEBRA DESIGNER program which is supplied together with label printer d Scales parameters and transmission protocol must corespond to label printer type USER MANUAL 12 Start up Leave the pan empty plug a scale to the mains with a ground contact The scale proceeds with following Q oook start up actions B G T FILTER SUM E Display test OFF BAT CAL MIN OK MAX 0 u NET lo UNIT MENU RSJ ZERO TARE Meter type displaying bb Ht Oo Program version Dig d The scale is now ready to work Attention Displaying program version means positive result of all tests USER MANUAL 13 Weighing with tare MENU o RS ZERO TARE gt ney OD is Dre De fee ZERO TARE UNIT If the scale is not loaded and 0 lt indicator doesn t indicate press key Zero indication and 0 lt indicator mean that the scale is ready to work After putting container package tare the scale using key NET indicator will show up Put on weighted object and readout net weight NET indicator shows that scale indicates net weight In order to readout gross weight press
29. essive printout number measurement Identification number or product bar code Number of pcs PCS function only Single detail mass PCS function only Net weight Tare package mass Gross weight Total mass Total function only If the scale is equipped with two serial joints Print function is set independently for both interfaces Computer must have a special program for cooperation with data from a scale Except RS232C joint the scale can be equipped with USB interface USER MANUAL 11 1 Detailed LonG protocol description Communication parameters 8 bits 1 stop bit no parity baud rate 4800bps initialising signal data send order correspond to press key Computer Scale S CR LF 53h 49h 0Dh OAh Scale gt Computer scale response according to description below 16 bytes Byte 1 sign or space Byte 2 space Byte 3 4 digit or space Byte 5 9 digit decimal point or space Byte 10 digit Byte 11 space Byte 12 k l c p or space Byte 13 g b t cor Byte 14 space Byte 15 CR Byte 16 LF Attention Network number different than zero SEr AL nr function changes scale working mode communication with a computer is possible after logging the scale in with 02h scale number command To log the scale out use 03h command Asking about scale presence in system testing scale connection with computer Computer Scale S J CR LF 53h 4Ah ODh OAh Scale gt
30. f the load cell contact an authorised service L pan missing put the pan on mechanical damage contact an authorised service H overloading remove the load from the pan mechanical damage contact an authorised service place the scale on a stable unstable ground e abtine ground not affected by sons l mechanical vibrations and indicator does not air flows airflows appear scale is damaged contact an authorised service SHIR ee taring in progress as above Be taring could not be finished the load is too small zero the scale or press B G key or B G key was used again the load is too big to be zeroed tare the scale gt T lt USER MANUAL Konformit tserkl rung 3 Certificate of conformity Im Langel 4 D 59872 Meschede Fon 49 0 29 03 97699 0 Fax 49 0 29 03 97699 29 Hiermit erkl ren wir dass die Bauart der nachfolgend bezeichneten info warensortiment de elektronischen nichtselbsttatigen Waage www warensortiment de Benennung Name Plattformwaage Typ Type PCE SD Serie Nr der EG Bauartzulassung T8418 Approval No of EC Eichklasse accuracy class I Herstellernummer Serial number Benannten Stelle f r die EG Bauartzulassung 0122 NMI NL dem in der Bescheinigung ber die Bauartzulassung beschriebenen Baumuster sowie den geltenden Anforderungen folgender EG Richtlinien entspricht We hereby declare that the product
31. ght after using key first range on in two range scale second range on in two range scale indication locked concerns LOC and UP functions special function turned on pieces counting weight unit g gram kg kilogram b pound unit other weighing result under threshold thr function weighing result between threshold and Il weighing result above threshold Il During inscribing numerical values needed during using special functions keys have special functions USER MANUAL 4 Scale extemal outputs Meter in aluminium housing RS232C RxD receive Extensometer TxD transmission housing WY option P1 threshold I P2 threshold 2 P3 threshold 12V 1 2A housing ground Feeder o 0 USER MANUAL Meter in stainless steel housing RS232C 60 708090 housing 19 29 39 49 59 Feeder ground RxD receive TxD transmission Separate ground connection scales in stainless steel version must be connected using additional conductor Extensometers are connected permanently USER MANUAL 5 Security rules To avoid electrical shock or damage of the scale or connected peripheral devices it is necessary to follow the security rules below e All repairs and necessary regulations can be made by authorised personnel only e To avoid fire risk use a feeder of an appropriate type supplied with the scal
32. ion is set independently for both interfaces USER MANUAL Sample printout during normal weighing all printout positions deactivated 20 07 kg 20 04 kg 20 04 kg Sample printout during normal weighing with clock option all printout positions deactivated 20 07 kg 2012 11 08 10 01 20 04 kg 2012 11 08 10 01 20 04 kg 2012 11 08 10 01 Sample printout during normal weighing some printout positions activated BA30 MAX 30kg e d 0 01kg SN ID OPER 000001 DATE 2012 11 08 12 26 3 01 0 PCS 0 000 g 3 08 kg 0 00 kg 3 08 kg 0 00 kg USER MANUAL 16 6 Setting backlight function b_LIGHt 306 ad 100 The function is used for choosing the work mode of scale display backlight mo gt o b_L OFF switch backlight off b_Lon switch backlight permanently on b_L ECO switch off after 30 seconds of inactivity MODE no load changes and no key operation CELD b_LbAt like above but when powering from SE k Li P accumulators only out out without changes kee z L Li H j Th Switching backlight off causes decrease of energy consumption by the scale what is important during powering from accumulators MODE hal oF F on b l ECD MODE b l bAt USER MANUAL 16 7 Analog out configuration AnALoG This option enables to set up analog out 4 20mA or 0 10V working method used e g in PLC r
33. key B G indicator shows that scale indicates gross weight Press again key in order to come back to net indications USER MANUAL 14 Scale menu All scales except for basic metrological functions weighing and taring have many special functions and configuration options ryt a In order to ease using functions user can create z 9 his own personalized menu Creating personalized menu In out of the box scale after pressing MENU key only SEtuP option it contains all configuration options is available UNIT MENU Oo ZERO TARE I an DEELIP MODE TARE MODE PTE any One of the configuration options is Menu that is used to create personalized menu To add a function to personalized menu press key when the function is indicating left side of display pm T Chosen function is indicated with o sign on the ac Ei After adding all necessary functions press out in ik order to come back to weighing mode User now after pressing MEnu key has access to selected earlier functions and to SEtuP option Ze dEFAULt option is used to set factory settings USER MANUAL 15 Menu navigation rules Choosing menu options Scale menu shows up after pressing Menu key It is sequentially displayed in the form of abbreviations Choosing menu position option is done by m pressing key when it is displayed on the Screen
34. layed successively thr oFF deactivate the function thron activate the function thr Prn check last threshold values press key several times thr CFG choose Relays socket mode 0 exit to weighing 1 Batching mode 2 Indication mode Choose thr on option using key The following options for entering thresholds are displayed SEt 0 go to weighing with signalling threshold excess SEt 1 set lower threshold value SEt 2 set upper threshold value SEt 3 set zero signalisation threshold Using key select SEt 1 option Set lower threshold value using the following keys digit increase a decimal point TARE move to next digit finish Then select SEt 2 option and enter upper threshold value Choosing SEt 0 option will cause starting work with signalisation of exceeding thresholds and zero To change Relays socket mode use thr CFG option Default option is Indication To leave the function press key and then choose thr and thr oFF options USER MANUAL Relays connection diagram gnd shield Relays output is the open collector transoptor output with load capacity 25mA 24V Transmitter inputs must be protected with diodes e g 1N4148 It is advised to use MS3K P electronic board sold separately consisting of RM96P transmitters with DC24V input voltage and AC250V 3A output Important notes 1 After switching the scale on both thresholds ar
35. ons e g tArE function requires to l inscribe tare values MODE Keys m no dioi e increasing digit value _ decimal point ZERO ZERO os TARE next digit position Jc BB 4 Z end of inscribing USER MANUAL Menu diagram MENU key PCS totAL SEtUP out AutoZEr personalized function menu created using SEtUP MEnu settings creating menu o added to menu Prod choosing product USEr choosing user PCS pieces counting function Unit actual unit selection PErc percentage conversion function Loc animals weighing function tArE tare memory bank UP maximum value function NEWton force and torque value function totAL summation series of measurements function thr threshold values comparing function StAt statistics function PAPEr paper grammage function out exit sensitivity calibraton only not verificated scales CAL on fast calibration without confirmation of putting weight CAL StP Calibration with confirmation out exit autozeroing Aut on autozeroing on AUt OFF autozeroing off lasts 10min out exit unit choice CArAt ct carat MGrAM mg miligram HGrAm kg kilogram Pound Ib pound ounCE oz ounce ounCE ozt aphotecary ounce GrAin grain PEnnYW jednostka jubilerska GrAM g gram out exit USER MANUAL SErIAL serial ports settings settings Port 1 por
36. ork Port g MODE HERJE MODE OPE Id b E A 5 5 E e Prr As Pr nl Id Ua at n n RPG ger BARE otf nar MODE Function is used for printing additional information stored in scale memory weighed product identification data and scale operator id That information is inscribed using scale keys or scanner The function allows to switch on off following positions on the printout HEAdEr header name model and scale number USEr Id scale user identification number USEr nA user name Prn no successive printout number choose this option to zero counter Prod Id product number Prod bA product barcode inscribed or scanned Prod nA product name Count counting result PCS function APW unitary mass PCS function netto net mass tArE current tare value GroSS gross mass totAL total mass totAL function Attention If Prod Id or USEr Id is chosen it is possible to inscribe quickly their new values with omission of main menu In order to do that hold about 3 seconds MENU key and release it when Prod Id or USEr Id indicates Inscribe new value using keys increasing digit decimal point next digit end While inscribing Prod id user can use barcode reader connected to RS232C interface If the scale is equipped with two serial joints Print funct
37. otective marks therefore to calibrate the scale please contact the nearest service 10 Accumulator change option 1 Remove screws 11 holding plate 2 remove the plate Take out container with accumulators 3 and place 4 AA format accumulators The way of packing accumulators into the container is shown on the een figure on the left and is also RS232C WY oy shown on the container oy 12V 1 2A 0000 o0oo000 USER MANUAL 11 Connecting a computer printer or lable printer The scale is equipped with RS232C which can be used to connect external devices such as computer or a printer When cooperating with computer the scale sends weighing result after initialize signal from computer or after pressing key on the scale When cooperating with a printer data is send automatically after result stabilisation but next transmission is possible after removing previously weighted sample When cooperating with label printer after pressing gts key the scale sends instructions set for the label printer Label number 0001 hour data if the clock is installed and on and nett weight During transmission LabEL communicate is displayed The way of sending data and transmission parameters is set using SErIAL special function Set of send data is set using special function Print The following data can be send Header scale type Max d e serial number Operator identification number Succ
38. ration with computer and Printer Scale can be equipped with two serial ports marked as RS232C I computer and RS232C II printer After each data printout by printer identical set of data is sent to computer After sending by computer initialization signal S A CR LF 53h 49h ODh OAh the scale sends to computer Statistic data enclosed in histogram USER MANUAL 17 16 Paperweight calculation PAP gt 20 mid 0 ois ok USB ZERO TARE jo o lio UNT MENU MODE PAP IE MODE PAP PAP n PAP Are MODE MODE ZERO TARE MENU mp PRP This function enables to calculate paperweight of 1m2 of paper basing on samples of known area For quick access the function is accessible directly by pressing key The balance must be tared just before the measurement Place the specific sample quantity of the same area possible values 1 2 5 10 20 50 100 Press key to access function menu To enter the function press key when PAPEr is displayed Following options show on the display PAP oFF turn off the function PAP on turn on PAP n inscribing number of paper pieces on an PAP ArE inscribing surface of single piece in m2 Press key when PAP ArE is displayed Enter number of samples using increasing digit next digit end of inscribing Press key when PAP A
39. rc is displayed Enter area of a single sample as above The result of paperweight measurement is finished with o mark pointing g m unit In order to finish work with function press and then using key choose PAPEr and PAP oFF Note PAP Err communicate marks that wrong values were inscribed in PAP n or PAP ATE USER MANUAL 18 Maintenance and repair of small defects 1 The scale should be kept clean The balance must be kept clean and protected from dust and aggressive liquids In order to clean it is recommended to wipe the scale with cloth soaked in soapy water and then dry 2 Take care that no dirt gets between the platform and the scale base If found any remove the pan lift it up remove dirt and then replace the pan 3 In case of improper operation caused by short lasting power supply decay unplug the scale from the mains and then plug it again after few seconds 4 If the scale is switched on with empty pan and SErvic e communicate appears the load cell has been mechanically damaged 5 It is forbidden to make any repairs by unauthorised persons 6 To repair the scale please contact our nearest service Error communicates Communicate Possible cause Remedy C 1 6 oar if displayed more than 1 minute over 1 min ee contact an authorised service unLOAd the scale was switched on with loaded pan remove a load from the pan SErvic mechanical damage o
40. roducts and users database Prod i USEr Scale is equipped with products and users database with capacity up to 300 products and 10 users Database consists of M nr memory number where data is saved Prod Id product identification number Prod bA product barcode Prod nA product name USEr Id user identification number USErnA user name APW unitary weight used when pieces counting PtArE inscribing permament tare to the product thr Lo threshold value low thrHi threshold value upper Database can be build in Excel datasheet form where each product has one row and each column have product data This way created database saved in csv extension with semicolons can be send to scale usind Scale Database software and scale s serisl interface Scale Database is available on oour webpage Database and possibility to cooperate with external devices printer label printer barcode reader and computer enables to built product identification and product archiving systems Product barcode readout during scale working initiates searching through database and in case of finding proper record recalls product data Found communicate Barcode reader enables also to insert numerical data conveniently standard ME 01 meter doesn t have numerical keys Using alphanumeric code for example 128 code it can be also used to insert names of products and users IR 901231 234569 5 USER MANU
41. sing digit next dixit end of inscribing Barcode reader connected to RS232C interface can also be used to inscribe data and this way it is faster and more effective Each database product has following data M Id memory cel number in products database Prod Id product identification number Prod bA product barcode Prod nA product name inscribed from PC or barcode reader APW product unitary weight optional PtArE product package weight optional thr LO lower threshold MIN value thr HI upper threshold MAX value Saving inscribed product data is done by using SAVE option USER MANUAL Users database is edited by similar function named USEr and consists of several options USEr Id user identification number USEr nA user name inscribed from PC or scanner Prn_U sending users database to port Saving data is also done by SAVE option Recalling from database li Fhe ref MODE icf Found 20 ad NET tom U kg f 3 sek ra a MODE Ic MODE m P F m IR rut 20 md NET ke The fastest way to recall product from database is to readout his barcode number Prod bA by using barcode reader option It can be done in any moment After readout of proper barcode scale indicates one of communicates SCAn barcode from outside the base accepted
42. sum of all samples sum_x gt x x average value sum x n min minimal value from n samples max maximal value from n samples max min maximal value minus minima value S standard deviation s gt x x Bl srel variance factor srel Statistical calculations results can be printed USER MANUAL Order of operations gt 06 mud SEA SEE SER o SER GEA h SEA nf SEA EOL z 3 N m SER E MODE SER CFE Ir kg lt 20 mad MENU MODE SEAL LAP GT Ed tia en F mn LT Press key When StAt is displayed press key The following options are displayed StA Prn monitoring and printout of statistical data StA oFF deactivate function StA Z activate function work with printout of chosen weighting results StA activate function work without printout StA n maximal samples value Sta nM inscribing nominal value for statistics Sta tOL inscribing tolerance in Sta tAr automatic tare on off StA CFG function configuration Auto Automatic work samples are confirmed after loading the scale and indication stabilization ManuAL manual work confirmation is made by pressing E key out exit from function Remember first to inscribe nominal weight value and tolerance mentioned above After that push fa key when StA o
43. t 1 bAUd transmission speed 1200 115 200 bps bItS bits quantity 7 or 8 PArltY parity control SEndInG transmission type Stab no StAb Auto Cont rEMoVE Prot protocol LonG EPL EPL_A EPL d PEn 01 SCAnn out exit Port 2 port 2 as above out Print printout data configuration transmission Port 1 port 1 HEAdEr header scale type Max d e serial nr User Id scale operator id number User nA user name Prnno succesive printout measurement number Prod Id product identification number Prod bA product barcode number Prod nA product name Cont pieces quantity PCS function APW product unit weight nEtto net weight tArE package weight tare Gross gross weight totAL total weight totAL function nr LCD measurement number and value in one line printout out exit Port 2 port 2 as above out exit dAtE ustawianie daty godziny if the scale is equipped with clock b_LIGHt setting backlight if display is backlighted b_L OFF backlight off b_Lon backlight on b_LECO turn off after 30 s without activity b_LbAt as above but only when supplied from accumulators out exit AnALoG analog out setting AnG rnG range value inscribing AnG CFG configuration plus minus both out exit USER MANUAL bAttEry turn on off accumulator charging if the scale is equipped with accumulator AUto OFF automatic turning off saving accumulator power as above
44. t date and time changing and inscribing 4 digit code is necessary using keys and USER MANUAL 17 12 Radio communication channel choise function rF CHn Function enables choosing radio communication channel between the scale and a pilot In scale and in pilot the same radio channels must be chosen Function should be used when communication is disturbed by other devices that use the same communication channel 20 mid UNIT MENU RS ZERO TARE eT MODE rF Hrn gt CHa MODE pa MODE Ha Ge lHa IB Lit kg _ Press key and choose rF CHn by pressing key The following communicates will appear on display successively CHn 01 channel 1 CHn 02 channel 2 CHn 16 channel 16 out out without changing channel In default setting channel 01 is on USER MANUAL 17 13 Charging accumulators function bAttErY option bAttErY function allows switching on or off charging accumulators during work with feeder and checking their power level l The function has the following options bAt OFF charging off option required if ordinary batteries are used bAton charging on accumulators are being charged z tae even after switching scale off using key L I l J r If bAt VoL reading power level of accumulators in pelea es go back to mass indication pressing key hF l rm Er out
45. to which this declaration refers conforms with the following standards EG Waagerichtlinie 2009 23 EC Council Directive PN EN 45501 1999 EG EMV Richtlinie 2004 108 WE Electromagnetic compatibility EMC PN EN 61000 4 3 A1 2008 A2 2011 PN EN 61000 6 3 2008 A1 2011 EG Niederspannungsrichtlinie 2006 95 EG Low Voltage Directive PN EN 61010 1 2004 Die Konformit tserkl rung gilt bez glich der EG Waagerichtlinie nur in Verbindung mit einer Konformit tsbescheinigung einer benannten Stelle Der vorstehende Satz entf llt wenn die nichtselbstt tige Waage von PCE Deutschland GmbH geeicht wurde Datum 01 01 2014 USER MANUAL Appendix A Information s concerning double range scale option 1 General description Double range scale s have capability of work with greatest accuracy in bottom measuring range part Weighing of smallest mass is more precise This type of scale s have two measurement range Max 50 of maximum load mostly Max 100 of maximum load and adequate reads digit d i dz d lt dy Double range options causes change of scale s operation after turn on in small mass range 0 Max scale displays result with reading unit di when the load pass the Max scale changes reading unit on dz from this moment scale displays result with reading unit d2 on all measure range 0 Max return to unit d is succeed after zeroing the scale key or when all mass is removed from
46. unction EPL_d cooperation with special label printers MODE Pen 01 cooperation with PEN 01 j m E th SCAnn cooperation with MJ 4209 barcode readers baud rate bAud 4800 9600 115 200bps number of bits in single char bitS 7 8 MODE Pork 2 N Pa ae parity control PArltY fat P N Hal ha nonE no control l fl Z Odd nonparity w Ua al Even parity control See scale number in network nr PAP EY a m m if the scale doesn t work in network the number MODE must be 0 a j f i transmission through serial interface SendInG pa ee Te Be StAb transmission after key is used and result is stable noStAb transmission after key is pressed without need of stabilisation Auto automatic transmission after load is put on and result is stable Auto Cont continuous transmission about 10 results per second Cont Remove trans Default parameter values Long 9600 bps 8 bits none StAb Fe mak MODE In order to set needed parameters choose SErIAL function select appropriate parameter and press key when required option or parameter value is displayed In scales with an additional serial port appear Port 1 and Port 2 for the independent setting of both ports USER MANUAL 16 5 Printout configuration Print 20 mm UNIT MENU m RS ZERO TARE MODE GEELP MODE P
47. ve without changes at s Press key when CAL StP option appears MODE calibration in two steps LAL on a a CAL on nen Press key when weight value used for Li Li Li g calibration is indicating or use othEr ai and WODE inscribe proper value keys l eakher PrESS PIE als Press and wait for writing zero to the fh scale When LOAD message appears put standard of 10009 EN mass on the pan Press key CAL on gt doesn t need pressing key lt i Lure PEGS a in ala Wait until internal calibration is finished and zero B indication is displayed PTE nL i a USER MANUAL 16 2 Autozeroing function AutoZEr When the function is activated the scale automatically ensures stable zero indication if the pan is empty or if zero indication was li acquired by pressing key To turn on the function use key and using key choose AutoZEr and then Aut on To leave the function press key then 20 mud MENU RRS ERO kn iss NODE with key choose AutoZEr and Aut OFF ec a k Ui fy Note MODE 1 AUt sign occurs only in scales with LCD EI ae JE display tie tal Im E f hy 2 In scales with key active function MODE changes name into AutoZE autozeroing m A ite rt m E and works only when the scale is unbaised Auk um MODE 20 md AUT fo m VEN PRS Me ge ares
Download Pdf Manuals
Related Search