DSR 12 Order Code: SPEA39
Contents
1. lt 356 mm _ gt Freq chart 28 Ef gt 299mm gt 2 4 i O RG EI HTHH TOR T E Mach Dares 005 100 200000 400 W oh a 30 26 He Block diagram 740mm 4 270mm lt 475mm gt 4 400 mm gt gt Connections This PSR series are equipped with 4 pole lockable speaker sockets For locking the connection turn the plug to the right For unlocking pull the unlock button and turn the plug to the left and pull it out of the socket Speaker socket PUSH UNLOCK Installing the speaker cables Connect your amplifier to the left and right speaker sockets The signal will be transmitted to the individual speakers Always treat the cables carefully and protect them from damage during transportation Always install the cables in a structured way and protect them from damage The cables must be installed in a way that no person can trip over them Always fix the cables with an appropriate tape etc Installation on a Speaker Stand The speakers may only be installed on a speaker stand if the original speaker is equipped with an appropriate stand adaptor Stands must only be installed on a plane area with a maximum inclination angle of 5 CAUTION Speakers installed under the influence of horizontal forces e g wind can be impaired This is why additio2. TWANVIN Y3SN N I u z amp N Y x QQ 0 m 7 q lt o u w a v N Y lt O o SO um o O o O N 5 5 o dm la x 6 6 z LN a Wao d DANI ad GNNOS LYNO 1ESBAAO a d s3133s ASG WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP Unpacking Instructions Immediately upon receiving this product carefully unpack the carton and check the contents to ensure that all the parts are present and have been received in good condition Notify the dealer immediately and retain the packaging material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling Save the carton and all packaging materials In the event that a fixture must be returned to the supplier it is important that the fixture is returned in the original carton and packaging CAUTION Keep this equipment away from rain moisture and liquids SAFETY INSTRUCTIONS Every person involved with the installation operation amp maintenance of this equipment should Be competent Follow the instructions of this manual Before your initial start up please make sure that there is no damage caused during transportation Should there be any consult your dealer and do not use the equipment To maintain the equipment in good working condition and to ensure safe operation it is necessary for the user to follow the safety instructions and warni
3. as wood concrete and brick etc This is why the fixing material must be chosen to suit the wall material Always ask a specialist for the correct plug screw combination indicating the maximum load and building material Suspended Installation DANGER TO LIFE The speaker must only be suspended by an experienced and trained persons Danger to life due to falling speakers Suspended Installation The speaker s has to be installed out of the reach of people The installation material must always hold at lease 12 times the weight of the speaker Please note The installation must always be carried out via two eye bolts on top of the and one at the rear The speaker can be tilted in a maximum vertical angle of 115 or maximum horizontal angle of 25 Woas assan
4. condary Attachment Please note The Speaker s must always be secured with three appropriate eye bolts and three appropriate safety ropes The eyelets and the safety ropes must always hold at least 12 times the weight of the speaker 4 3 Please note Before installing the eye bolts make sure that the thread is is always in perfect condition and free from dirt Install the eye bolts in the threaded holes on the speaker The eye bolts must be tightened until the stop position hand tight with out any tools Insert the quick links of the safety ropes in the eye bolts of the speaker system Pull the safety ropes over a safe fixing spot Insert the end into the quick link and tighten the safety screw The maximum drop distance must never exceed 20cm A safety rope which has already held the strain of a fall and is defective must not be used again DANGER TO LIFE Before putting the speaker into operation for the first time the installation has to be approved by an expert Wall Installation The speaker can only be installed on a wall if the original speaker is equipped with an appropriate mounting point Before attaching the speaker make sure that the installation area can hold a minimum point load of 10 times the installations weight e g 13Kgs 130Kgs point load The durability of the installation depends very much on the material used at the installation area building material such
5. g speaker systems LOUD NOISE HAZARD EAR PROTECTION MUST BE WORN FIRE HAZARD Keep away from cigarettes fire and heaters etc Treat the surface with a fire retardant at regular intervals The DSR series must always be provided with enough stability The speaker S base surface must always be sufficiently dimensioned in relation to the other speaker s in order to prevent the cabinets tilting over Make sure that the area below the installation place is blocked when rigging derigging or servicing the system Please note W Audio cannot be made liable for damages caused by incorrect installations and excessive noise levels Features e High impact molded polypropylene enclosure 1 5 Voice Coil 1 inch Exit Aluminium Compression Driver e 12 or 15 Mid Low frequency transducers e 1 Compression high frequency driver 80 x 60 Coverage pattern e 5 Integral suspension points e Complete mounting solutions e Smooth Response With High Power Handling Capacity e Ideal for entertainers mobile discos and small bands e Constant directivity horn e Passive 2 way crossover e Balanced frequency range with high sound pressure levels e Very high durability e Speaker connection via lockable speaker plugs e Stand adaptor Specifications DSR 12 DSR 15 Specifications 615mm 4 238mm lt 416mm gt
6. n if the main attachment fails When rigging derigging or servicing the speaker standing in the area below the installation place on bridges or other endangered areas are forbidden The operator has to make sure that the safety data is approved by an expert before operation for the first time and after any changes are made The operator has to make sure that the safety data is approved by an expert after every four years in the course of an acceptance test The operator has to make sure that the safety installation data is approved by a skilled person once a year Procedure The speaker should be installed outside areas where persons may walk by or seated IMPORTANT OVER HEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE including but not limited to calculating working limits installation materials used and periodic safety inspection of all installation materials and the speaker If you lack these qualifications do not attempt the installation yourself but instead use a professional structural rigger Improper installation can result in bodily injury and damage to your property The speaker has to be installed out of the reach of people CAUTION Speakers in overhead installations may cause severe injuries when falling If you have doubts concerning the safety of a possible installation do not install the speaker Before rigging make sure that the installation area can hold a minimum point load of 10 times the speakers weight Se
7. nal safety measures like attaching ballast weights have to be taken If inclined tension cables or prolonged outriggers are used the area of danger has to marked or blocked Before lifting or lowering the telescopic tubes you must always block a safety area around the stand This safety area must have a diameter of 1 5 times the maximum height Lifted telescopic tubes always have to be secured with a secondary securing attachment The total weight of the installation total weight of system including individual parts must never exceed the maximum load of the installation area Unintended movement of the load has to be avoided also in case of fire Loosen the fixing screws of the legs pull the legs out until the cross struts are at a 90 angle to the legs Tighten the fixing screws of the legs Installation Of The Speaker CAUTION The loads have to be installed in a balanced way CAUTION The carrying capacity of the stand or speaker stand must never be exceeded Overhead Installation If the speaker is to be installed with a mounting height of more than 1 meter e g ona stage or framework the speaker must always be secured with an appropriate secondary securing attachment The installation must always be secured with a secondary safety attachment e g an appropriate catch net The secondary safety attachment must be constructed in a way that no part of the installation can fall dow
8. ng notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the equipment e Never leave any cables lying around e Do not insert any objects into the air vents e Never remove warning or informative labels from the equipment e Do not open the equipment and do not modify the equipment e Only use the equipment indoors e Do not expose to flammable sources liquids or gases e Make sure you don t use the wrong kind of cables or defective cables e Do not drive the inputs with a signal level bigger than required to drive the equipment to its full output e Prevent distortion Make sure that all components connected to the speaker have sufficient power ratings Distortion will be generated if the components are operated at their limits e The user is responsible for correct positioning and operating of this fixture The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this equipment e Repairs and servicing must only be carried out by a qualified technician THIS UNIT CONTAINS NO USER SERVICEABLE PARTS e WARRANTY One year from date of purchase IMPACT HAZARD Secondary attachment for over head installation Danger to life due to fallin
Download Pdf Manuals
Related Search