ES292 IP Innovative VoIP Phone User Manual
Contents
1. Display Name It is showed as Caller ID when making a phone call WWW escene ru Escene Communication It is a username provided by SIP Server Authenticate Name It is authenticated ID for authentication It is a password provided by SIP Server Label with this account SIP Server Server for registration provided by administrator Secondary server When the main server can t work it also can register in this secondary server Outbound Proxy Put into the address with the outbound proxy server econdary Outbound When the main out bound server can t work it also can use this Proxy Server secondary server Poling Interval Time Poling Interval Time Of Registration default is 32 s Of Registration NAT Traversal Defines the STUN server will be active or not SIP Transport There are UDP TCP TLS three options Ring Type Select this account ringing type 5 2 Call Do Not Disturb off on Anonymous Call e of O on Anonymous Call Rejection of O on Use Session Timer off c on Session Timer 300 min 150s Call Method SIP TEL DNS SRV off on Allow events off on Registered NAT 2 off on UDP Keep alive Message off on UDP Keep alive Interval 15 60s WWW Escene ru Escene Communication ITEM DECSRIPTIO Do Not Disturb Enable Disable Do Not Disturb Anonymous Call Enable Disable anonymous call Enable Disable anonymous call rejection Rejection Enable Disable refresh session function The2. Headset MIC Volume The headset MIC volume default is Lv3 the range is 1 7 6 2 2 Advanced Ring e Uploading Ring Tone 202 Please upload a ring tone with G 11A audio coding Maximum 10 rings and the total sizes must less than 150k Gi23 G722 GIU disableCode Audio Codecs B G729A Gr x Jitter Buffer S Type Adaptive 2 Fixed Min Delay Max Delay Normal Delay 120 Other Payload Length ms High Rate of G723 1 VAD ge Echo Suppression Mode L SideTone ITEM DECSRIPTIO Ring Type Select the ring type Default is Ring 1 Uploading Ring Tone Please upload a ring tone with G711A audio coding Maximum 10 rings and the total sizes must less than 150k WWW Escene ru Escene Communication Audio Codec Use the navigation keys to highlight the desired one in the Enabled Disable Codes list and press the to move to the other list Jitter Buffer Type The type of Jitter Buffer is Adaptive or Fixed default is adaptive Min Delay The min delay range setting default is 60 Max Delay The max delay range setting default is 150 Normal Delay The normal delay range setting default is 120 Play Load Length The play load length setting default is 30ms High Rate Of G723 1 Enable Disable High Rate of G723 1 feature Enable Disable VAD feature Echo Suppression Enable Disable Echo Suppression Mode feature Mode Enable Disable Side Tone feature 6 3 Line Keys Mode Account
3. Save key to make it work Tips Network is changed press OK reboot Static IP Setting Static IP Press OK or MENU gt System Settings gt Advanced Settings gt Password Default is Empty gt Network gt LAN Port Press LAN Port to login in to the menu Select Static mode Press Enter key Set the IP Mask GW DNS web port telnet port Press Save key to make it work Tips Network is changed press OK reboot WWW Escene ru a Y Y Y LILUAISl UI I LLLLLLLLLLLLoLLILLLLLLLLLLLLLL Escene Communication PPPoE Setting Operating Steps Press OK or MENU gt System Settings gt Advanced Settings gt Password Default is Empty gt Network gt LAN Port Press LAN Port to login in to the menu Select PPPoE mode Press Enter key Set the User Name Password web port telnet port Press Save key to make it work Tips Network is changed press OK reboot 3 4 SIP Account Settings ES292 IP phone makes calls based on sip accounts It can support Single account or Multi account Each account can be configured to the different SIP server If you want to Create an SIP 1 Select System setting gt Advanced setting account 2 Enter the password required The default is empty 3 Select SIP gt Account sip 4 Select one of the account you want to setting you can configure the following parameters Enable account Select Enable Number of lines Default is 2 Descript
4. VoIP Call Forward T SONG 6 If Busy e off on Number NENNEN e It No Answer off on Number PY S Ring Frequency Seconds Default 15s Max 15s ITEM DECSRIPTIO All ways transfer the call to others WWW escene ru Escene Communication If Busy If the phone was busy working the call will be transfer to others If No Answer If the phone was no answer the call will be transfer to others Ring Frequency The ring frequency with the VOIP Call Forward 6 1 4 QoS SIP Qos 0 63 Voice Qos 0 63 ITEM DECSRIPTIO SIP QoS The range is 0 63 default is 26 The range is 0 63 default is 46 6 2 Advanced 6 2 0 Audio 6 2 1 Basic Tone EA Select Country United States W Ring Volume 0 9 Output Volume 1 9 Handset Volume speakerPhone Volume Headset volume Intput Volume 1 Handset Mic Volume SpeakerPhone Mic Volume Headset Mic Volume ITEM DECSRIPTIO Select Country Select the country dial tone Default is United States WWW escene ru Escene Communication Ring Volume The ring volume default is Lv3 the range is 0 9 Handset Volume The handset volume default is Lv5 the range is 1 9 Speaker Phone The speaker volume default is Lv5 the range is 1 9 Volume Headset Volume The headset volume default is Lv3 the range is 1 9 Handset MIC Volume The handset MIC volume default is Lv3 the range is 1 7 Speaker Phone MIC The speaker MIC volume default is Lv3 the range is 1 7 Volume
5. details Hang up while using the Return the handset to its cradle Handset or press End Hang up while using the Press Speaker button that is Bed Speakerphone or press Line button for the appropriate line or press End Hang up while using the Press Handset button Do not keep the headset mode Headset or press End keep the headset mode Hang up one call but Press End preserve another call on or refer to the above three methods the other line 3 5 9 Using Hold and Recover Switch Calling Line You can hold and resume calls You can take a call in one line at anytime and the other lines would be hold As a result of that you can switch different calling line on our phone If you want to Put a call on hold Press HOLD button or press soft key Hold a line and switch to Press another Line button for the appropriate line another line Resume a call on current Press Line button WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication Release a call on Select the line want to release hold press the line so different line recovery NOTES e Engaging the Hold feature typically generates music or a beeping tone e A held call is indicated by the Yellow green LCD and flashing Line button or Hold in the 3 5 10 Transferring Calls Transfer
6. device will send an Invite packet to refresh the session during a call if it enable Session Timer The refresh session time interval DNS SRV Enable Disable DNS SRV Allow events Enable Disable Allow events Registered NAT Enable Disable Registered to NAT Message and to avoid the server to shut down the port Interval 5 3 Security Call Method This method include SIP and TEL SIP Encryption e of O on K RTP Encryption e of on Encryption Algorithm Encryption Key Po ITEM DECSRIPTIO Security SIP Encryption Enable Disable SIP encryption RTP Encryption Enable Disable RTP encryption Encryption Algorithm The encryption algorithm at this time we only have RC4 Encryption Key The key with encryption WWW Escene ru Escene Communication 6 Phone Setting 6 1 Basic BackLight O off O Always On timer s Min 1 Max 255 2 Keyboard Lock SA Hot Line Function off Delay s 0 30 Hot Number Po GA Auto Answer off on 7 Turn On But Filter This Group Auto Answer Mode Hands Free Handle Headset Call Waiting O off on Call Waiting Tone O off Play on currently active device Frequency s 5 60 EA DTMF RFC 2833 Inband SIP Info Auto E Fuzzy Search off on Phonebook Search Accurate Search T9 Call List Save O off on Metwork Packet Mirroring Basic Enable Disable keyboard lock you can lock MENU Key FUNCTION Key ALL Keys LOCK all keys but auto Ans
7. gt Missed Calls Received Calls or Dialed numbers 2 Use the navigation keys to view the call record information Delete Save Call 1 Login in to the Call Logs WWW escene ru Escene Communication 2 Use the navigation keys to view the call record or select DEL key 3 Use the navigation keys to view the call record or select Save key 3 6 3 Peer to Peer When all of the phone accounts were disable or not register it will be show this mode in the idle It can use by when the new workstation isn t have SIP server Disable all of accounts or not register Make Call with 1 Press OK or MENU button System Setting Advanced Setting Peer to Peer SIP Account 2 Disable all of accounts or un register 3 Turn back the phone idle you can call someone use IP address 3 7 Keypad Setting SayHi series IP Phone can through two ways configuration it one is setting in MENU another is setting in website Here just description in MENU NOTES When you want to input the IP address like it was replaced by the 3 7 1 Language Setting ES292 IP Phone support Multi Language setting as below is an example Switch the Language 1 Press OK or MENU button gt System Setting gt Phone Setting gt between Chinese and Language English 2 Here you can select English French Italian Polish Protuguese Runssian Spanish Turkish Chinese 3 After you finish select press Sav
8. m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Escene Communication 6 1 2 Call Pickup Function Pickup Code Message Booking Voicemail Play Voicemail Tone Miss Call Display DND Softkey Play Hangup Tone Transfer Code Conference Exit Result Return code when refuse Return code when DND Flash hook time amp 00ms Called No AnswerTime Pound Send Mothod RFC 2633 PayLoad P Asserted klentity oP Session Timer seconds T1 oP Session Timer seconds T2 oP Session Timer seconds T4 Local SIP port RTP Port Range Affiliated Port Headset Mode Ring Type On Seat Mode D off 8 on 123 OT No w off O on O off 8 on O off on O off 8 on off OQ on Number amp Disconnect All C Others Remain Connected 603 Deciine 603 Decline s Min 20 Max 99 e 023 101 LJ off on e e s Je Default 5060 mee eus __ O off an Normal Seat Made e Headset Speaker ITEM DECSRIPTI Pickup Function When you are not in the position others can help you to answer Pickup Code Fill in server s pickup code The code with voice message Booking Voice Mail Open this feature the phone light Message will be bright when it get message Play Voice Mail Tone Open this feature it will be ringing when it get message Miss Call Display urn on or off the display with Miss call in the phone LCD WWW escene ru EINER EELIULLGLUGIL LHOI OGIICL LL
9. please connect again 8 2 Advanced 8 2 1 Log This feature is use for the administrator to managing the equipment like debugging SIP etc If you need to catch a debugging Level you need to setup on this interface Log gt gt 2 No Record Call m Warning Level SIP Record Level 2 LCD Debugging Level Log send to server off on Log Server Address Po 514 WWW Escene ru Escene Communication 8 2 2 Auto Provision When you open this auto provision feature the phone will do auto provision after it detect a different software or kernel Higher or Lower which are putted on the TFTP HTTP HTTPS FTP server For the detailed information about auto provision you can find it in the official website HTTP www escene cn en Auto Provision gt gt 2 off o Auto Provision Option 66 Default 66 Min 1 Max 254 Protocol Software Server URL Username Password Auto Download Software Auto Download Kernel Auto Download Config File Auto Download Expansion Auto Download Enterprise Phonebook Auto Download Personal Phonebook Booting Checked o h Da Disable the phone while booting checking on Auto Provision Frequency Hour Default 7 days Max 30 days Auto Provision Time Mone w Auto Provision Next Time Thu Aug 8 12 24 00 2013 AES Enable off on AES Key Auto Provision Now When using auto provision you can set several parameters as follow Auto Provision P
10. you can select the user or logout ZE Administrator Logout WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication 10 2 Multi Language In the upper right corner of the website page you can select the language in the below list Please Select Language English English Chinese Chinese HRussian Russian Polish Polish Portuguesa PFortuguesa French French Brasil Brasil Turkish Turkish 10 3 Note Tips In the right middle of the website page there is a Note tips in every function page Hope it can help you to know something about that Note Register status It shows the Register Status Network Status It shows the information of LAN port and PC port System Info It shows the version of firmware WWW escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Escene Communication
11. 2 3 7 4 Ring Tone and Volume Settin iii 23 3 7 5 Searching Phone BOOK i 23 3 7 6 Cannot Set the Features with Keypad i 23 4 WEB User Interface cose arceri sion iari ade S arsit bra p Ew RR xa a adea en E M GT cd a 24 WWW escene ru ERE EEUU a et o Fl bp Z7 Zzm zT PEe c c c JSS Y SM N h O P O NL h N J J J J ulule I Escene Communication Main Intertace Phone Statilius ii 24 E NE WOK eegen 25 Na 25 bl POP 27 SEENEN 28 APRACO ri i 29 e 29 kl 30 Do SCCI Ee 31 PHONE dl e blica 32 Dil Bilan 32 bd E Wun CC le EE 33 biblia 34 6 1 3 VoIP Call Forward ii 35 bin 36 NAP ee sa 36 SE Ee O EEN 36 SS EE 38 FFONIO RTT ULT 39 CORSO PEPE 40 6 1D IRE t OTT TORT 40 SPARE gl A 41 FPO BOCK MT 42 FM OD mr 42 TZ OAC Giai 42 ODA 43 K NI E EE 44 8 Phone Malnate 45 Dd EE 45 8 1 1 HTTP rs EE 45 S LZ FIP IO FAC ll 46 Ol WA ON ege 47 So LS Def lE SEIN 48 e ET ie EE 48 o 2 GV ANC OG EE 48 REL 48 ORAN AWO POVISIO siii 49 BCEE 50 10 WEB Other Settings or Information Appendix iii 50 URN EE 50 t02 EN E Bn Le El ananas 51 10 gt Noe ipsa 51 www escene ru E IO Escene Communication 1 Getting Started About Escene ES292 is a highly innovative based VoIP phone It can perfectly satisfy all kinds of businessmen s com
12. D 2 All enabled line on the phone would changes to de Status and the icon is BB Press MENU or OK button gt Function setting gt DND gt select line Enable Global DND enabled press ITA to disable global DND Line DND enabled press twice DND or press MENU or OK button gt Function setting gt DND gt select line Disable 3 5 13 3 way Conference You can enable a three party conference during the conversation three phone parties can communicate with every party Invite the transfer recipient into a conference in a transferring Invite the third party into a conference in a active call Escene Communication 1 When the transfer recipient answer the call press CONFERCENCE button or CONF on your phone 2 Then the held one transfer recipient and you will be into a conference and the LCD will display status 1 Press CONFERENCE button or CONF in an active call 2 Enter the third party number 3 After connected the third party press CONFERENCE button or CONF again WWW Escene ru establish a 1 when one phone line is holding on and the other line is conference with held busy line 2 Press CONFERENCE button or Press CONF Soft key 3 Press the held line s programmable button the 3 way Conference is enable 3 5 14 Voice Mail When the Phone get a voice mail from server it will light up the voice
13. Date setting gt Manual Setting 3 Manual Setting Manual Setting Year Month Days Hours Minutes Seconds 1 Press OK or MENU button 2 Press OK or MENU button gt System Setting gt Phone Setting gt Time amp Date gt Time Display Format 3 Time Mode 24hour 12hour Date mode DDMMWWW MMDDWWW WWWDDMMM DDMMMYY YYYYMMDD DD MMYYYYMMDDYYNDDMMMYYYYNWWWDDMMM etc Time Display Format WWW escene ru IIMSSWss Sec EEl 56JJ 5 Escene Communication 3 7 4 Ring Tone and Volume Setting 1 Press OK or MENU button 2 Press OK or MENU button gt System Setting gt Phone Setting gt Ring Type 3 Select the ring type from 1 to 8 or custom ring and then press Save to make it work 1 Press OK or MENU button 2 Press OK or MENU button gt System Setting gt Phone Setting gt Volume Setting 3 Volume Setting Handset Speaker Headset Ring volume 4 Press Enter to adjust the volume and press Save to make it work NOTES For the Custom Ring Type you need to upload it from website Ring Type 3 7 5 Searching Phone Book 1 Press MENU or OK button gt Function Setting you can select Accurate Search Accurate Search 2 Then press Enable Disable and Save 3 When you back to idle you can use the digital keypad to search the contact T9 Search 1 Press MENU or OK button gt Function Setting you can select T9 search 2 Then press Enabl
14. ES ENE ES292 IP Innovative VoIP Phone User Manual WWW escene ru Escene Communication Escene Communication Co Ltd INDEX IM Cruise rcgio ee 4 EE 4 Feature HIGAION Sagan ai 4 2 Set up the Phone irc 5 d e lee Le ase puoauaipccadiext RIF RSEN RIOT S ETHER GNU RE E EIN M DNENTGCI UTOR ONSE 6 3 1 Hardware Component Instructions eeeeeeeeeeeeen nenne nennen nennen 6 3 2 Phone Screen Display Features eeeeeee ener 8 3 3 Basic Network Settings eeeeeeeeee nennen enne nnnm nnnm nnne nnn nnno 9 3 4 SIP Account EE 10 Ao PCF TE 11 FLM a Gall a aa 11 3 5 2 ANONYMOUS Cdl 12 ONCE ROO ee 12 Bit IW UO RR E RA torent 12 3 5 5 Making Calls tO Contatti 13 3 5 6 Multi lines to Answer the Call eee mmn 13 3 57 li cM 13 eux leie Epi REN m Uc 14 3 5 9 Using Hold and Recover Switch Calling Line esees 14 3 5 10 Transferring Calls E a 15 50 ee RR E A IR 15 35 12 DO NODI al 16 3 5 1 9 Way COnFerelice EE 16 3914 VOCE Mall P i 17 3 6 Advanced Settings fe 17 3 6 1 Using the phone book sssssssssssssnnnssnnnrnnnrnnnnrnnnnrnnnernnnernrnennrrennrnennne 17 3452 Using tal Ee EE 20 2 0 9 PET EE Eeer 21 3 7 Keypad SHIN 21 DL Language SEMINO BEE 21 FA le E ER HS UM 2
15. IuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication LDAP LDAP Name Filter LDAP Number Filter server Address Cwmp Port Base Username Password Max Hits 1 32000 LDAP Name Attributes 1 LDAP Name Attributes 2 O on of sn 05 SA e e e e e e e e LDAP Name Attributes 3 fo LDAP Number Attributes 1 LDAP Number Attributes 2 Po LDAP Number Attributes 3 Ps Protocol Version2 Version3 Search Delay ms 0 2000 o L LDAP Lookup For Incoming Call e on of LDAP Lookup For PreDial Dial e on of 7 4 Ban List You can add edit and delete contact in a Ban List on this web page Serial Number Description First Name Last Name Mobile Number Home Number Office Number Account Auto Account Account Account3 WWW escene ru Escene Communication ID Operation Name Phone Description Number1 3333 1 L test3 testc Number2 3333 test3 Number3 3333 Add BanList Delete All BanList If you want to add a Ban List you just ought to click Add Ban List You can edit an existed Ban List by click 4 Account Auto You can delete an existed Ban List by click if you want to delete all Ban List you just ought to click Delete All Ban List You can edit or move this contact to Contact after you select 2 8 Phone Maintenance 8 1 Basic NOTES Don t cut off the elect
16. Key Soft Keys Soft key is the key with below display in the LCD You can change it for your mind to the other features in many all kinds of status As below example when you dialing with someone the LCD display soft key is Send Del Empty End Empty means nothing in it Connecting Softkey Key Enable 3 of on Ga Transfer Connecting RingBack Transfer RingBack Phone Status Call Fail Call In ordered by position Empty Exit EndCall Transfer to Conference Call Waitine 6 6 Dial Plan If you want to setup a dial plan you can click Dial Plan Send Key e A D Dial Length No Dial Timeout ID Operation Prefix IP Address Description Add Rule Delete All Rule ITEM DECSRIPTIO Send Key Select the default send key mode you want to use Dial Length Enable this feature will limit the dial length Default is 25 No Dial Timeout Setting the range with no dial timeout default is 5 Dial Rule Select the Add Rule button to add dial rule pls see as below detail WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication ID Description IP fs Port Default 5060 5060 Called Insert Called Delete Number Number Position Position Number Length Note When you want to add code and delete at the same time you can add code first after that base on the number you add decide the pos
17. Name Number Key3 Line v ML E line keys gt gt Mode Account Name Number Keyt Speed Dial Key2 Speed Dial Prefix sd Paging Call Park Intercom Funrtinn Rouse s BLA ITEMS Line Speed Dial Speed Dial Prefix WWW escene ru Escene Communication DTMF sequences via DTMF Call Park You can use call park feature to place a call on hold and then retrieve the call from another phone in the system for example a phone in another office or conference room Intercom You can press the configured intercom key to automatically connect with a remote extension for outgoing intercom calls and the remote extension will automatically answer the incoming intercom calls NOTE ONLY WHEN YOU CHOOSE SPEED DIAL THE RIGHT OF NAME NUMBER WILL TAKE EFFECT 6 4 Function Keys Function Keys If you do not like the default setting with the function keys feature You can change to whatever you like NOTE IF THE PHONE WITHOUT THE KEY YOU CAN IGNORE IT Operation Account Name Number Let lt lt d d d Right Default vi li Redial OK ui vl STL Conference Contacts JI Conference Enterprise Phonebook kd Redial LDAP vi Ji d Hold Missed Calls vli o OIL EN as II Service Dialed Calls b Diretories Menu vi li SMS Menu New SMS vi li 1 Call Forward Mute View Status b d Message Call Forward k WWW Escene ru Escene Communication 6 5 Soft
18. Q4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication 3 5 5 Making Calls to Contact You can also dial a contact from the Personal Phone Book Placing Calls to 1y Press MENU or OK button gt Phone Book you can select Contacts Personal Phone Book Enterprise Phone Book LDAP and Black List or press Navigation button in Standby interface gt select the desired contact 2 Then press Dial button NOTE You also can press the DIR to login this menu when in the idle 3 5 6 Multi lines to Answer the Call Multi lines to Answer 1 Another Line button is Red and flashing Light strip is the Call Red and flashing 2 Press the flashing Line button to answer at this time the original call will be hold 3 5 7 Auto Answer You can set the phone and let it auto answer the coming call Auto Answer th 1 Enable the Auto Answer feature Coming Call 2 Auto Answer mode you can set in the MENU gt Function Setting gt Auto Answer gt Device Speaker e Handset e Headset When you use the Handset mode at this time you need to hands WWW Escene ru EEEHpHp M U H p HMHA pDpDIDSC E g DCKK E eE MF F jJ i qA_v _z z Escene Communication up the handset and then it can work at this status 3 Filter Groups Auto answer the coming call in this special groups 3 5 8 Ending a Call To end a call hang up Here are some more
19. U PBP tkdes OGLLLLOUPq 44X4GC GCICLGQG GU OL OOGILA L OO O OS O AL LL LL AO LUUD Escene Communication DND Soft key Enable Disable the DND feature Play Hang up Tone The tone with hang up in busy Transfer Code The code with transfer Conference Exit Result Conference originator hang up the phone hang up two ways of it Return Code When Select the code feedback to the server when you reject the call Refuse Return Code When DND Select the code feedback to the server when you open DND function Flash Hook The time with the flash hook Time lt 800ms Called No Answer Time When it has coming call and enable this feature the caller will be request time out in the stipulated time Pound Send Method When you to use the code such as 28 123 or 9023123 you need to set this feature Default is 101 RTP Payload for DTMF Digits Telephony Tones and Telephony Signals Enable Disable the P Asserted Identity feature The SIP Session Timer setting RFC 2833 Play Load P Asserted Identity SIP Session Timer T1 SIP Session Timer T2 SIP Session Timer T4 Local SIP Port RTP Port Range Affiliated Port Headset Mode Ring Type On Seat Mode The SIP Session Timer setting The SIP Session Timer setting The port range setting with SIP default is 5060 The port range with RTP Enable Disable the affiliated port feature Select headset mode with normal or seat Select ring type mode with headset or speaker 6 1 3
20. able Socket5 Proxy Server Socket5 Proxy Server IP address Socket5 Proxy Server port default is 1080 Anonymous Login Enable Disable Socket5 Proxy Server login username Paging Setting NOTE This feature priority is followed the serial number In other words paging 1 is the highest priority Paging1 Enable Disable Paging feature Group IP and Port Group IP and Port with Paging 4 1 2 PC Port Normally choose Bridge if you choose Router you need to input router IP address net mask Bridge O Router IP Address S Netmask DHCP Server off on Start IP End IP Bridge Normally you should choose bridge feature it means that pc port and LAN port will share the same network Router Router feature is for the phone PC Port You must input IP address it s equivalent to a gateway and Net mask If you want to use DHCP function please turn it on input start IP and end IP WWW escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Escene Communication 4 1 3 Advanced VPN Setting Enable VPN VPN Type LATP LTP GL VPN When using VPN Setting option you can set several parameters as follow VLAN Setting Enable VPN You can enable disable VPN for phone and pc VPN Type Choose the appropriate type of VPN VPN Server Addr VPN server s IP VPN Password A password be used for authentication VLAN Set
21. allation This section introduces how to install the phone with the components in the packing list Attach the Bracket e Connect the Handset and optional Headset e Connect the Network and Power Attach the Bracket Pls follow the following step a to b firstly let the part 1 of the bracket join to the phone and then let the part 2 of the bracket join to the lower holder WWW escene ru P Uwmmmserm 4 09890909 90909090 0 0 0 0 0 0000 0 05 0 Escene Communication Connect the Network and Power You have two options for power supply Your system administrator will advise you which one to use AC power adapter e POE Power over Ethernet IEEE802 3af e USB Standard DC 5V NOTES Pls make sure your phone support POE feature You can check the label on the back of the phone for example Model ES292 PN Rev 2 1 0 the P means it support POE feature IEEE 802 3af compliant ef PoE Hub Switch Power e Adapter T DC 5V cx c uu J A Note If POE works the phone doesn t need to connect to the AC power adapter Make sure the Ethernet cable and switch hub is POE compliant 3 Phone User Interface 3 1 Hardware Component Instructions The main hardware components of the ES292 IP Phone are the LCD screen and the keypad WWW Escene ru Escene Communication Hardware component instructions of the ES292 IP Phone are EE ITEM DESCRIPTION 1 LCD Screen Displa
22. djusts the volume of the handset headset speaker and ringer 3 2 Phone Screen Display Features If the phone has successfully started up and after using the idle LCD display will show information as below ITEM DESCRIPTION 1 TIME amp DATE TIME amp DATE display in the middle of the screen Enable this feature it will display AA at the top right corner Missed Call Missed Call under the TIME in the middle of screen 4 Line Status There are four status as below a E amp MEDisconnect Disconnect the network b EB Account failed to register C BB Account successfully registered d BB account successfully registered and DND feature is enabled The DND icon also will display at the top right corner Soft Key Area Labels automatically to identity their context sensitive features Screen Top Icon The Screen Top Icon from left to right is et Handset Hand on status WWW escene ru Escene Communication W speaker Hand on status Beet Hand on status B MUTE S missed Call EX Forward EL Message B keypad Lock BH Network is Unavailable 3 3 Basic Network Settings The phone supports Three Modes of Network Setting Include PPPoE Static IP DHCP DHCP Setting DHCP Press OK or MENU gt System Settings gt Advanced Settings gt Password Default is Empty gt Network gt LAN Port Press LAN Port to login in to the menu Select DHCP mode Press Enter key Set the DNS web port telnet port Press
23. e Disable and Save 3 When you back to idle you can use the digital keypad to search the contact NOTES The Search Phone Book setting default is Accurate Search 3 7 6 Cannot Set the Features with Keypad As below features are cannot setting with the keypad 1 Dial Plan 2 Custom Ring Type 3 SNTP Server and Time amp Date 4 Update the Firmware or Backup WWW escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Escene Communication 4 WEB User Interface In addition to the phone user interface you can also customize your phone via web user interface In order to access the web user interface you need to know the IP address of your new phone To obtain the IP address press the C key on the phone Enter the IP address e g HTTP 192 168 0 10 or 192 168 0 10 in the address bar of web browser on your PC The default user name is root case sensitive and the password is root case sensitive Main Interface Phone Status Here you can see as below information Status System Information Phone Status Current Location Phone Status System Run Time Register Status Network ZE Administrator Logout Please Select Language English English v D Note Nano System Run Time 0 Days2 Hours32 Minutes14 Seconds Register status TERT Register status o It shows the Register Status Account1 Registered Phone Setting Account2 U
24. e phone ET S TE The mode doesn support is ear NOTES It s not necessary to input filename when doing backup Configuration Phone Book EXT Module 8 1 3 TFTP Upgrade You can upgrade the software kernel and configure files by TFTP THIF Upgrade gt Software Upgrade Kernel Upgrade Note Its no necessary to input filename when backup Configuration Update Backup Phone Book Update Backup EXT Module Update Backup When use TFTP upgrade you can set several parameters as follow Configuration Used for updating backup the configure file of the phone Phone Book Used for updating backup the phonebook of the phone EXT Module Used for updating backup the expansion of the phone NOTES The mode doesn t support this feature WWW escene ru Escene Communication NOTES It s not necessary to input filename when doing backup Configuration Phone Book EXT Module 8 1 4 Default Setting You can load the phone to the factory default setting in default setting option Default Setting gt When click this button this equipment will restore to the default status Pay Attention It will take effect on next reboot Reset to Factory Setting Press the Reset to Factory Setting option the phone will load to factory default setting on next reboot 8 1 5 Reboot You can use reboot option to reboot the phone Reboot gt Attention When click this button this equipment will be reboot web service will be interred
25. e to make it work WWW Escene ru 5 H zcocr r igi N2 pgo _N gt gt 5 5oo Ji K O HNHNH EHM M M b I _ lt w lt wuumuwu lt L L L OIO__OCO Escene Communication 3 7 2 Message ES292 have Message feature It will display in the LCD when it has a New Message 1 Press OK or MENU button 2 Select Messaging Message 3 Voice Message Setting the Voice Message code in here Create Text Message Write down the Text Message in here 4 Select Text Message gt New Message 5 Input the receiver and write down message body and then press send to finish Message Inbox 1 Select Message Inbox 2 Select which one you want to check 3 You can press Enter to read or press Del to delete 3 7 3 Time amp Date SNTP 1 Press OK or MENU button 2 Press OK or MENU button gt System Setting gt Phone Setting gt Time amp Date gt Time and Date setting gt SNTP 3 SNTP Time Zone Setting the time zone NTP Server 1 NTP server address 1 NTP Server 2 NTP server address 2 DayLight Enable Disable Day Light SIP Server 1 Press OK or MENU button 2 Press OK or MENU button gt System Setting gt Phone Setting gt Time amp Date gt Time and Date setting gt SIP Server 3 Press Save to make it work Manual Press OK or MENU button 2 Press OK or MENU button gt System Setting gt Phone Setting gt Time amp setting Date gt Time and
26. eakerphone Place a call using Put on your headset a headset active Headset button so that the status light is Rea and then do as using speakerphone WWW escene ru Escene Communication 3 5 2 Anonymous Call You can use anonymous call feature to block the identity and phone number from showing up to the called party when you call someone E g you want to call to consult some of the services but you don t want to be harassed Enable Anonymous Call Press OK or MENU gt Function Setting gt Anonymous Press Enter or OK button You can select which Account want to use enable disable this feature and enable disable reject anonymous 3 5 3 Redial To redial the last placed call from your phone Redial Press REDIAL button to dial the last number or press Navigation button Left gt Dialed number select a number and press Dial 3 5 4 Call Log Dial from a call log 1 Press MENU or OK button gt Call history you can select All Calls Missed calls Received calls and Dialed numbers or press Navigation button in Standby interface select All Calls up Missed calls down Received calls left and Dialed numbers right 2 Then press Dial button NOTE You also can press the log to login this menu when in the idle WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO V
27. hone Number Others Number Setting the contact Others Number SIP Account Setting the contact call SIP account Group the contacts be divided into different user s groups 4 Press Save soft key to complete Add group 1 Press DIR soft key or press MENU button gt Phone book gt Personal phone book gt View All or press OK button gt Phone book gt Personal phone book gt View All 2 Select the add group then press OK button 3 Use the navigation keys to select content press OK button WWW escene ru EBE VEESS amp S amp amp amp S amp amp amp SeSsM I M k lV W VMVMM N MM e Escene Communication to set and modify Group name name of the group 4 Press Save soft key to complete Modify group 1 Press DIR soft key or press MENU button gt Phone book gt Personal phone book gt View All or press OK button gt Phone book gt Personal phone book gt View All 2 Select the Modify group then press OK button 3 Select the group you want to modify press the OK button to set and modify press Save to save the change Delete group 1 Press DIR soft key or press MENU button gt Phone book gt Personal phone book gt View All or press OK button gt Phone book gt Personal phone book gt View All 2 Select the Delete group or OK button 3 Select a group y
28. ion description of this account Display Name The name displayed on the screen Authentication user the Authenticated users are matched with the SIP server The default With the same account Account the account matches with the SIP server extension number User pass word the user password matches with the SIP server SIP Server The primary SIP server all calls through this WWW escene ru Escene Communication server Out Bound Server The out bound SIP server STUN Type Enable Disable STUN feature STUN Input STUN URL Auto Answer Enable Disable this account auto answer feature Note When you finish the setting you can press Save to make it work and then you can see the status icon in the LCD idle 300 The parameters with the mark must be set Disable sip account 1 Select System setting gt Advanced setting 2 Enter the password required The default is empty 3 Select SIP gt Account sip 4 Select Enable account gt Disable 5 Select Save to saves settings 3 5 Basic Features 3 5 1 Making a Call Here are some easy ways to place a call on SayHi IP Phone If you want to Place a call using Pick up the handset 1 You can hear dial tone 2 Enter a number the handset 3 Press button default or wait 5s default then it send the number automatically Place a call using Press Speaker button a sp
29. ition and length of the delete code DECSRIPTIO DECGRIPHO S he number which you need to press actually if you want to call the phone NOTES If you want to know more detail about Dial Rule pis find it in the official website to download the specific document HTTP www escene cn en 6 7 IP Strategy You can use IP Strategy feature to make a list which can be set to only allow the incoming call on the list e g As following picture you can see it has 192 168 0 248 in the list When you open this feature It means you just allow come from this IP address meeting IP Strategy off on ID Operation IP Address Description Account WWW Escene ru Escene Communication 7 Phone Book The phone book including Group Contact LDAP and Ban list please review the following for more details 7 1 Group You can add edit and delete group in a phone book on this web page Click the groupname you can modify or delete the member of the group ID Operation Group Name Group Member Description Ring Type 1 Di test 0 test Ringt Attention If you Click Delete Group or Delete All Group the member of group can not within a group please click the group and delete the group Add Group Delete All Group If you want to add a Group you just ought to click Add Group You can edit an existed Group by click 4 You can delete an existed Group by click if you want to delete all Groups you just ought to click De
30. lete All Group 7 2 Contact You can add edit and delete contact in a phone book on this web page The phonebook can storage 300 contacts entry Serial Number bw First Name Last Name Mobile Number 1111 Office Number 1111 OtherNumber 1111 Account Group test bei Group www escene ru Escene Communication Operation Name Phone Group L Number1 1111 1 m H on test test Number2 1111 test Number3 1111 Attention If you want to download or upload the contact please go to the Phone Maintenance page Add Contact Delete All Contact If you want to add a Contact you just ought to click Add Contact You can edit an existed Contact by click 4 You can delete an existed Contact by click if you want to delete all Contacts you just ought to click Delete All Contact You can edit or move this contact to Ban List after you select H You can download and save this contact to PC after you select 7 3 LDAP NOTES If you want to know more detail about LDAP pls find it in the office website to download the specific document HTTP www escene cn en As below figure is an example e g LDAP Name Filter sn s LDAP Number Filter telephoneNumber 9os Server Address 192 168 0 65 BASE DC ldap DC escene DC com User Name bb ldap escene com Pass Word escene_2012 LDAP Name Attributes 1 sn LDAP Name Attributes 2 cn LDAP Number Attributes 1 telephoneNumber WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGAT
31. mail button Voice Mail 1 Press the Voice Mail button There has Voice Mail icon amp without is en 2 Enter the User Password 3 Itwill login into the voice mail server You need to follow the IVR to do it 3 6 Advanced Settings 3 6 1 Using the phone book Enterprise Phone Book Search the 1 Press DIR in the idle status Contacts from or press MENU or OK button gt Phone book Enterprise Enterprise Phone Phone Book Book 2 Select Enterprise Phone Book press OK button 3 Press Find and input the name who you want to search Call the Contact 1 Press DIR in the idle from Enterprise or press MENU or OK button gt Phone book Enterprise Phone Book Phone Book 2 Select Enterprise Phone Book press OK button WWW Escene ru EES I O Escene Communication 3 Press Find and input the name who you want to search 4 When you search the person you can dial it Personal Phone Book Add Contacts 1 Press Phone Book or press MENU button gt Phone book gt Personal phone book gt View All Oor press OK button gt Phone book gt Personal phone book gt View All 2 Select Add contact press OK button 3 Use the navigation keys to select content press OK button to set and modify Name set the name of contact Office Number Setting the contact Office Number Mobile Phone Number Setting the contact Mobile P
32. munications ES292 integrates with 132x64 pixel graphic LCD a large resolution display elegant and intuitionist user interface which you can perfectly experience ES292 delivers HD audio quality with HD handset HD speaker and HD codec G 722 it rich features can effectively improve the communications in working ES292 quite meets the demands of SMEs Home Office and ISP applications Feature Highlights a Multi Language The LCD display supports Multi Language b HD Voice Special voice processing technology high fidelity voice quality HD encoding HD Handset ensure clear realistic smooth communication c Senior Calling Ability 3 lines with double color GREEN amp RED LEDs Synchronously control or manage 2 calls Call queue Switch between lines Multi parties conference call transfer d All kinds of Phone Book It supports XML Personal Phone Book LDAP Enterprise Phone Book etc This feature satisfies customer s phone book requirements e Support HTTP TFTP FTP Auto Provision f Support POE Remark ES292 PN Power Adapter USB Standard DC 5V g 2 angle adjustable bracket wall mountable WWW escene ru E IO Escene Communication 2 Set up the Phone a Packing List Check the packing list before installation if you find anything missing contact your system administrator 1 ES292 IP Phone 1 Handset 1 Handset Cord 1 Ethernet Cable 1 Phone Bracket 1 Quick Setup Guide 1 Manufacturer Certification b Phone Inst
33. nnection Mode Network Connection Mode has DHCP Static IP PPPOE DNS Settings Select the DNS mode that you want WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication Advanced Port Management Settings HTTP Port Telnet Port Socket5 Proxy Server D Socket5 Proxy Server off on Sener IP Je Anonymous Login Usemame Password Po Paging Setting Paging 1 off on Paging 2 off on Paging 3 off on Paging 4 off on Paging 5 off on Please Note Changing the default HTTP Port 60 will require using the new port number to access the IP phone web interface Please note that changes require a reboot Use the following format when not using the default HTTP http ip address portnumner ITEM DESCRIPTION Port Management Settings HTTP Port The default web port is 80 if you want to change it for example change it to88 You must input IP and Web port to login the web page for example HTTP 192 168 0 200 88 It will take effect on next reboot Telnet Port The default Telnet port is 23 if you want to change it for example change it to 2003 You must input IP and Telnet port to login the manage page for example telnet 192 168 0 200 2003 It will take effect on next reboot www escene ru Escene Communication Socket5 Proxy Server Socket5 Proxy Server Enable Dis
34. nregister Network Status Account3 Unregister It shows the information of LAN port PhoneBook Network Status and PC port LAN Connection Dynamic Phone Maintenance MAC Address 00 26 8b 01 c4 84 System Info LAN IP Address 192 168 0 159 It shows the version of firmware CEE Netmask 255 255 255 0 Gateway 192 168 0 1 Primary DNS 210 21 4 130 Secondary DNS 221 5 88 88 VPN IP Address PC IP Address PC Netmask Device Type Bridge DHCP Server off System Info S Phone Model ES292N Software Version V1 0 8 6 3897 Hardware Version V2xx Hardware ID 1 Kernel Version V2 6 4 ITEM System Run Time Register Status Network Status System Information Escene Communication AutoProvision Server URL TFTP Server IP voip autoprovision com voip autoprovision com DESCRIPTION The phone system normal running time The status with Account 1 3 The status with LAN MAC LAN IP Net mask Gateway Primary DNS Secondary DNS VPN IP PC IP PC Net mask Device Type DHCP Server The status with Phone Model Software Version Hardware Version Hardware ID Kernel Version Auto Provision Server URL WWW escene ru LIT Server IP 4 1 Net Work 4 1 1 LAN Port Basic Basic gt gt DHCP Manufacturer Option 60 Po O Static IP E IP Address Netmask Gateway O PPPoE Username Password MTU Default 1500 DNS Settings DNS Automatic Manual DNS Primary DNS secondary DNS ITEM DESCRIPTION Network Co
35. ou want to delete press OK button LDAP Search the 1 Press DIR in the idle Contacts from or press MENU or OK button gt Phone book LDAP LDAP 2 Select LDAP press OK button 3 Press Find and input the name or number who you want to find search from the LDAP server Cal the Contact 1 Press DIR in the idle from LDAP or press MENU or OK button gt Phone book LDAP WWW escene ru WS 1 LL Escene Communication 2 Select LDAP press OK button 3 Press Find and input the name or number who you want to find from the LDAP server 4 When you search the person you can dial it Black List Add the Contacts 1 Press DIR in the idle or press MENU or OK button gt Phone book gt Black List 2 Select Black List press OK button 3 Press Add and input the name office number mobile number other number SIP account who what you want to add into the Black List View the Contact 1 Press DIR in the idle from Black List or press MENU or OK button gt Phone book Black List 2 Select Black List press OK button 3 Press RUN to view someone who what you want to find 4 If you want to move or change it you can follow the RUN to do 3 6 2 Using Call Logs Your phone maintains records of your missed placed and received calls View call logs 1 Press MENU or LOG button gt All Call
36. redirects a connected call The target is the number to which you want to transfer the call Talk to the transfer 1 Press TRANSFER button or press XFER recipient before 2 Enter number 3 press default Or press Send then transfer the call or wait five seconds default then transfer the call transferring a call consult transfer Transferred to idle 1 Press TRANSFER button or XFER lines Or other 2 Press IRL numbers without 3 Enter number talking to the 4 press default transfer recipient Or press Send then transfer the call l or wait five seconds default then transfer the call Blind transfer Blind transfer to the 1 Press TRANSFER button or press XFER held line 2 Press the Line button of held line 3 5 11 Using Mute With Mute enabled you can hear other parties on a call but they cannot hear you You can use mute in conjunction with the handset speakerphone or a headset Toggle Mute on Press C button then the screen top and left will have a MUTE con WWW escene ru Escene Communication Toggle Mute off Press C button again then the button light off 3 5 12 Do Not Disturb You can use the Do Not Disturb DND feature to block incoming calls on your phone with a busy tone Can also be set to their voice mail or other extension numbers etc Enable global DND Enable DND on a single line Disable DND 1 Press DN
37. ricity or network cable when doing upgrade in the below ways 8 1 1 HTTP Upgrade You can upgrade the software kernel and configuration etc files by HTTP HTTP Upgrade gt Select a File Browse Software Upgrade Kernel Upgrade Configuration XML PhoneBook All Config File When using HTTP upgrade you can set several parameters as follow HTTP Upgrade WWW escene ru Escene Communication upgrade from HTTP Upgrade Kernel Upgrade Used for upgrading the kernel of the phone Configuration You can used upload download to upload download the configure file of the phone XML Phone Used for uploading downloading the XML phonebook of the phone Book one by one EXT Module Used for updating backup the expansion of the phone STES NOTES The mode doesn t suport his feat with this equipment All Config File All Config File includes Configuration Extern Log XML Phone book Enterprise Phone Book 8 1 2 FTP Upgrade You can upgrade the software kernel and configure files by FTP FTP Upgrade gt gt Password o O Software Upgrade Kernel Upgrade Note It s no necessary to input filename when backup Configuration Update Backup Phone Book Update Backup EXT Module Update Backup When using FTP upgrade you can set several parameters as follow FTP Upgrade The IP address of the FTP server www escene ru Escene Communication the phone phone EXT Module Used for updating backup the expansion of th
38. rotocol Software Server URL Username Password Auto Download Software Auto Download Kerne Auto Download Config File Auto Download Expansion Auto Download Enterprise Used for auto download Enterprise Phonebook from server Phonebook WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication Booting Checked Used for checking the auto provision when phone booting Disable the phone while Enable Disable the booting checking feature booting checking Auto Provision Frequency Used for setting the time interval for auto provision Auto Download Personal Used for auto download personal phonebook from server Phonebook Auto Provision Next Time Reset the Auto Provision Next Upgrading time AES Enable You can enable disable AES encrypt for auto provision AES Key The key of the AES Auto Provision Time Used for the specific time for auto provision Auto Provision Now Used for doing auto provision immediately 9 Password Here you can setting the administrator or user WEB password management Select your type If you login as an administrator you can modify both the user s and admin s passwords Administrator User Username Old Password uu New Password uu Confirm Password uu 10 WEB Other Settings or Information Appendix 10 1 WEB User In the upper right corner of the website page
39. ting Enable Vlan LAN Port PC Port VID 90 4094 VID 0 4094 Priority 0 7 Priority 0 7 When using VLAN Setting option you can set several parameters as follow VLAN Setting Enable VLAN You can enable disable vlan for phone and pc VID The vlan ID you want the phone or pc to join LAN PC Port WWW Escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo m Qmng Go qGODODOGBA amp amp vooD QC LLSO VQ4 AISEAPAe Pe H I AO NNPJ NIlNlLlIl_a Escene Communication 5 SIP Account 5 1Basic Enable g Account Mode Amount Of Line Account Used Default 2 Display Name fs SA Username Authenticate Name fs SA Password a Label 1378 SIP Server E Secondary server fs SA QutboundProxy Server fs e secondary QutboundProxy Server fs e Polling Interval Time Of Registration s Default Value 32s Range 20s 60s NAT Traversal ae STUN Server iid BLA off on BLA Number fs Subscribe Period Default 1800s Min 120s 9 Register Expire Time Default 3600s Min 40s Auto Answer off on SIP Transport e UDP O TCP TLS Ring Type Choose one Account you will find the following parameters ITEM DECSRIPTIO You can choose on off to enable disable the line Account Mode You can choose VOIP PSTN but this model nonsupport PSTN If yo need Pls contact us to buy another model that can supports PSTN Amount Of Line The line key of account used default is 2 Account Used
40. wer Auto Answer Auto answer the coming call it also can filter a contact group Auto Answer Mode Auto answer the coming call it also can filter a device to answer Call Waiting When there s coming a call or the phone is talking the second call will be in the queue Call Waiting Tone Select the frequency with the tone when call waiting DTMF The DTMF transmitted mode include RFC2833 Inband SIP Info Auto Fuzzy Search Fuzzy search someone with the phone book in the idle Phone Book Search Enable Disable the phone book search feature with accurate or T9 mode Call List Save You can choose to save the call list into the phone or not Network Packet When select on then you can capture the phone s packet use Mirroring notebook which connect to pc port of the phone WWW escene ru Escene Communication 6 1 1 Time Settings Set Ti E SS TTT amp SNTP OSIP Sewer PSTN Manual Mode SNTP Server sparky services adelaide edu au sparky services adelaide edu au List sparky services adelalde edu au Manual Update Interval 600 Seconds ae seconds Daylight Savings Time always off always on Auto ae Mode Time Format e 24 Hour 12 Hour S Date Format Time Zone GMT Manual Yea Mon Days0 setting GMT 08 00 Beijing Hous0 Minutes seconds Set Time Mode SNTP Server Update Interval WWW escene ru ENERGIE ULLIITOLLLUL LISGGUGGATIuU L CC COqoo
41. yed information about calls messages soft keys time date and other relevant data e Call information caller ID call duration e Icons e g IBNB e Missed calls or second incoming caller s information eTime and date 2 Light Status Red Flashing There is an incoming call or be Hold Red Steady Hook off or be in an usual conversation 3 Line Key Green Steady There is a conversation making on the line Red Flashing There is call coming in Green Flashing The line is on hold Dark Accounts are idle Soft Key Labels automatically to identity their context sensitive features OK Key Confirm the action Navigation Key Scroll through the displayed information and in the idle feature UP Open the All CONTACT LOG DOWN Open the MISSED CALL RIGHT Open the RECEIVED CALL LEFT Open the DAIL CALL Cancels actions or rejects an incoming call and the other feature WWW escene ru Escene Communication Functions Key Conference Redial Transfer Hold Speaker Key Toggles the hands free speaker phone mode Keypad Provides the digits letters and special characters in In the idle Open the Phone Status Diagnosis Press and hold 3 second to open Hardware Diagnosis MUTE MUTE feature is enabled if you press it while the conversation making on the phone ES ES context sensitive applications Headset Key Toggles and indicates the headset mode Message Key Indicates and accesses voice messages 3 Volume Key A
Download Pdf Manuals
Related Search