KML-5000 TraveLog USER MANUAL_revA
Contents
1. and as such the antenna is built specifically to accomidate this type of polarization LED Indicators There are 3 LED indicators on the KML 5000 Yellow Green and Red When the KML is powered on from a cold boot state the yellow indicator will flash in 5 second intervals 5 on 5 off When a GPS signal lock is aquired the yellow LED will cease activity and the green LED will flash briefly every 32 seconds Though this seems like long intervals this sequence indicates normal operation NOTE Be patient it can take up to 5 minutes to aquire a satillite signal The red LED is only active when the media card is inserted DO NOT remove the media card while the red LED is steadily active The red LED will be steadily active while the media card is inserted When data is being written to the media card both red and green LED s will flash Once all data has been written successfully all LED s will blink rapidly It is safe to remove the media card while all LED s are actively flashing If any errors occur in the data transfer only the red LED will blink You may remove the media card while the red LED is actively blinking Working with Media cards Page 20 of 21 DWG ID 181 0104 00 Date 2006 01 24 The KML 5000 can work with two types media cards The KML 5000 works with the MMC type and some SD cards may work as well Size of the card is not important It really depends on what you are willing to spend The actual inte2. THIS SECTION BEFORE INSTALLING THIS KANTRONICS PRODUCT This product contains SOFTWARE in FLASH Memory which is protected by both United States copyright law and international treaty provisions If you install or use this product you are bound by the terms of the SOFTWARE license shown below If you do not wish to be bound by such license return the unused complete product package to your supplier for refund The supplier may deduct restocking re packaging costs 9 2 License Agreement 3 1 1 License In consideration of payment of the License Fee which is included in the price of the product the Licensor Kantronics Company Inc Kantronics grants you a non exclusive right to use the SOFTWARE and associated documentation No ownership rights to the SOFTWARE or its Documentation are transferred from Kantronics to you 3 1 2 Term This License Agreement is effective until terminated You may terminate this Agreement by returning or destroying the unit and destroying the documentation You may not rent or lease the SOFTWARE but you may transfer the SOFTWARE and accompanying written materials on a permanent basis provided you retain no copies and the recipient agrees to the terms of this Agreement Kantronics may terminate this Agreement without notice if you violate any terms or conditions of the agreement In the event of termination of the Agreement provisions relating to Kantronics disclaimers of warranties limitation of liability
3. manual shipped with the software bundle E 3 2 Note To use KML software NET 1 1 Framework is required ADDING AND REMOVING USERS At the top left of the KML software screen you will notice some menu items We are primarily concerned with USERS at this time Click on USERS and select ADD USER A small dialogue box will appear with two fields for information You may also select the style and color of PUSHPIN for that user For the name enter a name that will identify the user or asset that is to be kept track of For the serial number enter the serial number of the KML unit that is assigned to that specific user or asset Now that we have added a user we can begin adding PUSHPINS which will be covered in the next section To delete a user click on the USERS menu and select DELETE USER Note that deleting a user from the KML software only removes that user from the TERRITORY but leaves that users data intact To delete a users GPS data click the USERS menu and select DELETE DATES You will have the option to delete user data for selected dates or all of the users data Before exiting the KML software if you have added or removed any users to a TERRITORY you must save that information to the TERRITORY associated with the user or group of users This can be accomplished from the FILE menu in the top left section of the screen WHAT ARE PUSHPINS Put quite simply a PUSHPIN is the same as on any other map a location m
4. remedies or damages and Kantronics proprietary rights shall survive 3 1 3 Object Code The SOFTWARE is delivered in object code only You shall not reverse compile or otherwise reverse engineer the SOFTWARE 3 1 4 Limited Warranty This product is covered by the standard Kantronics Company Inc Limited Warranty 3 1 5 General This License Agreement constitutes the complete Agreement between you and Kantronics The SOFTWARE and or Documentation may not be exported or re exported Page 8 of 21 DWG ID 181 0104 00 Date 2006 01 24 in violation of any export laws or regulations of the United States of America or any other applicable jurisdiction This Agreement shall be governed by and interpreted under the laws of the State of Kansas United States of America Use duplication or disclosure by the Government of the United States is subject to restrictions as set forth in subparagraph c 1 11 of the Rights in Technical Data and Computer SOFTWARE clause of DFARS 252 227 7013 Kantronics may in its sole discretion provide you with upgrades of the SOFTWARE and or Documentation if you have provided Kantronics your completed Warranty registration with a copy of your receipt showing the amount you paid 3 1 6 Other LICENSEE ACKNOWLEDGES HAVING READ AND UNDERSTOOD THIS AGREEMENT AND AGREES TO BE BOUND BY ITS TERMS LICENSEE FURTHER AGREES THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN LICENSEE AND LICE
5. shown in figure 5 3 data is displayed in a spreadsheet format Starting and ending times are displayed along with location distance average speed and maximum speed Right click a location to edit the location if it is not displayed correctly such as a blank entry or wrong address Double clicking on an entry will cause a zoom to that location on the map Page 17 of 21 DWG ID 181 0104 00 Date 2006 01 24 A bold line indicates that the KML 5000 has had a power up reset That means that power to the KML has been disconnected and then reconnected again This does not erase stored GPS data This event is shown as an asterisk in column 1 of the printed report as in figure 5 4 Italic lines indicate random position fixes which occur about every 60 minutes while the ignition is off This event is shown as a period in column 1 of the printed report A red line indicates a GPS antenna fault such as an unplugged cable This event is shown as an exclamation in column 1 of the printed report In addition to printing the entire report whole sections or even single lines can be printed To print a section or single line of the report Use the Control Ctrl and Shift Shift keys on the keyboard with the left mouse button to select the line or lines to be printed A Speed report can also be generated HARDWARE INSTALLATION Vehicle Installation Requirements The power requirements for the KML 5000 are fairly simple As wit
6. software program to achieve your intended results rests with you 3 1 13 REMEDY PROCEDURE Should you need to make a warranty claim first contact the dealer from whom you purchased the product If the dealer is unable to assist you contact Kantronics Co Inc e By mail at 1202 East 23rd Street Suite A Lawrence Kansas 66046 USA e By fax at 785 842 2031 e By phone at our Customer Support number 785 842 4476 Hours 8 AM to Noon and 1 PM to 5 PM Central Time e Or by e mail at service kantronics com Contact us prior to returning an Applicable Product to receive a Return Authorization Number As a practical matter problems can often be solved in such a manner without the product having to be returned to Kantronics for repair or replacement Return of any Applicable Product for the enforcement of rights under this Limited Warranty shall be at your expense Any product returned for warranty service which Kantronics determines to be without defect or not covered by this Limited Warranty shall be subject to a minimum labor charge and the product will be returned to you at your sole expense Please note no warranty service will be provided until Kantronics has been furnished with your Warranty Registration and copy of proof of purchase establishing purchase date 3 1 14 NON ASSIGNMENT This Limited Warranty is not assignable by you Any attempt to assign or transfer any of the rights duties or obligations hereof is void
7. 3 1 15 OTHER RIGHTS This Limited Warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction Return Repair Procedures Important Our repair statistics show that a large percentage of units returned for service do not in fact require any service Therefore we advise you to please double check the following list of common user solvable sources of difficulty before contacting Kantronics about returning your unit for service An RMA Return Merchandise Authorization number must be requested and received and included with the unit Page 11 of 21 DWG ID 181 0104 00 Date 2006 01 24 returned for repair If a unit is received without an RMA number the shipment will be denied 3 1 16 Return Procedures When calling the service department have the following information available e The unit name and serial number the serial number is found on the bottom of the unit 3 1 17 Service department contact information Kantronics Co Inc 1202 E 23rd Street Suite A Lawrence KS 66046 The Service Department telephone hours are 8 AM to Noon and 1 PM to 5 PM Central Time Monday through Friday Telephone access to the service department is not available outside the stated hours Phone 785 842 4476 8 AM to Noon and 1 PM to 5 PM central time Fax 785 842 2031 E mail address service Wkantronics com Web site http www kantronics com When writing faxing or se
8. KANTRONICS KML 5000 TraveLog USER MANUAL DWG ID 181 0104 00 Date 2006 01 24 Kantronics Co Inc 3115 West 6 Street Suite A Lawrence Kansas 66049 Phone 785 842 7745 Fax 785 842 2031 Web http www kantronics com DWG ID 181 0104 00 Date 2006 01 24 1 REVISIONS n 2004 05 10 0 2 2005 09 09 Revised with smaller CCA and packaging Added installation information ST a SN Page 3 of 21 DWG ID 181 0104 00 Date 2006 01 24 2 TABLE OF CONTENTS IREVISION Sacra dut tdt leas er 3 2TABLE OF CONTENTS miride sa o o O 4 SGE NERA BIN EO RIVAL ION dias 5 rl A A E a i eaaa E EREA 5 4 2 Technical Support serrie na e a a ri ERa vee aw aie eee 5 A a A 5 6 2Disclaimer Not e dl a a ani 5 7 2 antronics Warranty Registrat ni i 6 Dateof Purchases aia a 6 DIZI G ieee 6 8 2Jmportant Informati II Shaa eo 7 9 2Eicense Agreement aoda A A A O E a A aE a 7 Deal Ma MMC TiS ea as NO 7 Il Teraa n E a E E R E a a EE 7 3 1 3 Object A 7 ILA Limited Warranty re liin einni me sane cade E bul ramus OE E E A a as 7 A E a A a reer ere 7 IEO OET O A 8 102 Limited Waranty rata 8 3AT WARRANT Y oeie i n a a EREE T O EE RE 8 ILS REMEDY Seran eae a aae A Geena enone 8 3 1 9 EXCLUSIVE REMEDY veseri de ad Lice nats 8 SL LO DISCLAIMER A aA EAE EEE tase 9 3 1 11 APPLICABLE PRODUCTS AND PERIOD ccccsccssssssessseessesseeeseeessseesseeenes 9 3 1 IZ EXCLUSIONS E T e el O A 9 3 1 13 REMEDY PROCEDURE oda 10
9. NSOR AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT ORAL OR WRITTEN AND ANY OTHER COMMUNICATIONS RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT 10 2Limited Warranty KANTRONICS COMPANY INC Effective 2003 09 01 To receive notice of future updates or free copy of this manual please go to http www kantronics com NOTE Return of the Warranty Registration and proof of purchase is a pre condition to warranty coverage 3 1 7 WARRANTY Kantronics Co Inc Kantronics warrants to the first consumer purchaser you for the Applicable Warranty Period as described below that the Applicable Product as described below will be free from defects in material and workmanship 3 1 8 REMEDY Kantronics agrees that for any Applicable Product found by Kantronics to be in violation of the warranty within the Applicable Warranty Period it will at its option repair or replace the defective Applicable Product at no charge to you excluding in bound shipping charges 3 1 9 EXCLUSIVE REMEDY Page 9 of 21 DWG ID 181 0104 00 Date 2006 01 24 Repair or replacement of the Applicable Product as provided herein is the sole remedy available to you against Kantronics and in no event will Kantronics be responsible for any other liability or damages or for incidental special or consequential damages regardless of whether purported liability is predicated upon negligence strict tort contract or other products liability theory and wh
10. SAMA NONSASS IONMENT dai 10 SES OTHER RIC ES a wate aia 10 Return Repara da odo 10 3 1 bo Retum PO a ed 11 3 1 17 Service department contact INfOTMAtiON ooooconccnococonoconnnconncconocano conocio non nc cono nnnnnnnnos 11 Repalrsernvics Chad dl OS 11 SPECIFICATION OF PRODUCT as odia 12 PRODUCTINEORMATION eS 13 Model Idea acid 13 Whatis TG KM Enaura a a A is 14 FLOWS t Work A h a a a a a n A a AE ae 14 What software canm T Uses ni A A i E A 14 Adding and Removing US iii A A a A din 15 O TO 15 O aie 16 Importing GPS dai ci 16 Whatisthe ACK TS A india 16 Page 4 of 21 DWG ID 181 0104 00 Date 2006 01 24 Workme y ad A is 17 Gener ting WSEr Tp e a Ls 17 Hardware nta a Aia 18 EDC ators das ab 20 Page 5 of 21 DWG ID 181 0104 00 Date 2006 01 24 3 GENERAL INFORMATION 3 2 Sales Inquiries Phone 785 842 7745 8 AM to 5 PM Central Time Monday through Friday Fax 785 842 203 1 E mail sales kantronics com Web site http www kantronics com 4 2 Technical Support Phone 785 842 4476 8 AM to Noon and 1 PM to 5 PM Central Time Monday through Friday Fax 785 842 2031 E mail service Wkantronics com 5 2 Miscellaneous The Kantronics TraveLog is manufactured in the U S A All brands and product names are trademarks of their respective companies 6 2 Disclaimer Notice We have attempted to make this manual technically and typographically correct as of the date of the current issue Production changes t
11. The ACK file contains the most recent dates and times collected by the KML 5000 If a valid ACK file exists on the media card the KML 5000 will only write data that is more recent than what data is contained in the existing ACK file NOTE fa valid ACK file is not found on the media card all GPS data will be written to the media card WORKING WITH GPS DATA Now that you have imported the user GPS data lets figure out what it means After the ACK file is written the KML software will select the most recent date for which there is data for the selected user and plot that data to the screen It is possible to display more than one user and or date at a time however in the case of a single user the GPS data is color coded for speed indication If more than one user is displayed GPS data is color coded by user only To display more than one user or date click on the USER or DATE drop down menus and using the control Ctrl or shift Shift keys with the left mouse button to select a range of users or dates Keep in mind when working with multiple users or dates it may take some time for your system to display the data You may also move or delete line segments with the mouse to see the layered data This affects only the display and not the actual GPS data GENERATING USER REPORTS There are several reports that can be generated from the imported GPS data The first type is a Trip Report Click on the USER menu and select REPORT As
12. arker PUSHPINS are used in the address lookup function as you will see later in the USER REPORTS section Page 15 of 21 DWG ID 181 0104 00 Date 2006 01 24 When performing address lookup MAP POINT will attempt to find an address for starting and stopping locations based on GPS data This however is not an exact science Some areas do not have an actual address such as a parking lot So MAP POINT will first look for any nearby PUSHPINS and use that information for the location data PUSHPINS should be placed in locations where vehicles are expected to stop or visit frequently such as schools doctor s offices garage etc To add a PUSHPIN to a user click on the USERS menu and select ADD PUSHPIN A dialog box will appear and require a location to find Once the location has been found click OK As stated earlier this is not always exact so you may need to move the PUSHPIN a little If this is the case simply drag the PUSHPIN to the location where it should actually be located You may edit the information contained in a PUSHPIN by double clicking on it The name of the PUSHPIN can be changed to something more memorable such as home library offices etc To delete a PUSHPIN from a user click on it and press delete on your keyboard WHAT IS A TERRITORY A TERRITORY is collection of USERS and PUSHPINS Once you have added users and placed pushpins click on the FILE menu and select SAVE TERRITORY When opening the KML software t
13. ether or not Kantronics is warned about the possibility of such liability or damages SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU 3 1 10 DISCLAIMER This Limited Warranty is in lieu of all other warranties expressed or implied and no representative or person is authorized to assume for Kantronics any other liability in connection with the sale of its products KANTRONICS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE FOR ANY APPLICABLE PRODUCT IF HOWEVER YOU ARE A CONSUMER WITHIN THE MEANING OF 15 U S C 2301 3 THE ABOVE DISCLAIMER OF IMPLIED WARRANTIES IS EFFECTIVE ONLY FOR PERIODS OUTSIDE THE APPLICABLE WARRANTY PERIOD SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU 3 1 11 APPLICABLE PRODUCTS AND PERIODS Kantronics products are of two types 1 hardware units and 2 firmware and software for operation of these units whether incorporated into the units themselves or separate from the units as adjuncts or accessories to the units Hardware units and the media containing firmware software and documentation are sold to the consumer purchaser and become property of the purchaser Firmware and software are licensed for use by the consumer purchaser in return for a fee included in the pu
14. h any electric device there is power and ground However the KML has a second power input This second input is the ignition sense This line is used so that the stored GPS data will reflect when the vehicle is started and stopped as well as logging travel and destinations Installation of the KML is a fairly simple process First secure the KML in your vehicle somewhere out of the operators way Build the power connection using 22 or 24 AWG wire and the supplied power connector Please refer to figure 3 1 and 3 2 The recommended wire colors are Ground Black 12 V de constant Red 12 V de sense Yellow Page 18 of 21 DWG ID 181 0104 00 Date 2006 01 24 You may of course use whatever colors you would like Next hook up the ground to a solid ground source Any ground will work however I recommend attaching to the vehicle chassis just under the driver side door strip or somewhere on the floor board This is a solid ground to the vehicle chassis and causes no obstruction for the operator Now hookup the power to an always on source There are a couple of ways to go about this One is to run a wire all the way to the vehicle battery While this will get the job done it is time consuming and problematic So I would recommend finding a source in the vehicle fuse panel and securing it with the appropriate wire end You can use a multimeter or fuse tester to find what terminals are always on and what ter
15. hours 8 AM to Noon and 1 PM to 5 PM Central Time e Or e mail to service kantronics com to obtain a Return Authorization number Repaired units will be returned via FedEx or UPS C O D if other payment arrangements have not already been arranged C O D charges can be avoided by providing payment information VISA MasterCard or Discover either at the time of the return authorization request or included with the unit when it is sent to be repaired PRODUCT INFORMATION The TraveLog equipment uses a GPS receiver microcontroller unit Flash EEPROM and peripheral components to log GPS location and time data and then download it to an MMC Note This equipment is only for installation in a transportation vehicle including a motor vehicle Model Identification Model KML 5000 TraveLog 001 0020 01 SPECIFICATION OF PRODUCT Page 13 of 21 DWG ID 181 0104 00 Date 2006 01 24 Operating Supply Current 13 8 V de 100 mA maximum Supply Current in sleep mode ignition off 1 60 mA maximum RIA Connect 3 pole Header Operating Temperature 30 to 60 C 95 non condensing 0 904 H X 1 690 W X 2 625 D TBD ounces TBD g WHAT IS THE KML 5000 The KML 5000 Passive Tracker provides recording of vehicle or equipment location for later retrieval Kantronics KML 5000 Passive Tracker includes a GPS receiver and a data logger Once installed in a vehicle it can record up to 36 eight hour days of GPS data loca
16. minals only have current when the vehicle is running The ignition sense wire should be routed to the vehicle fuse box as well except to a feature that is only powered when the key is on You may of course run the wires to where ever you can find the appropriate power sources The fuse box is recommended due to its close proximity to the most common equipment mounting locations Termina Connection I 1 Vehicle Ground 2 12 V dc ignition sense 3 12 V dc constant Figure 3 1 Power plug pin assignment Figure 3 2 Power connector view from rear With power applied the LED indicators will begin their sequence which I will cover in the next section Page 19 of 21 DWG ID 181 0104 00 Date 2006 01 24 Make sure the GPS antenna is hooked up and mounted somewhere either in or outside the vehicle with a clear view of the sky The GPS antenna is magnetic and will hold to the body of the vehicle It is recommended that this antenna be mounted on the roof of the vehicle However mounting the antenna on the dash board inside the vehicle is another option that may work just as well You must use the antenna provided to receive GPS data Another type of antenna such as a whip wired up to the GPS antenna will receive very little if any satallite signals There are 2 reasons for this 1 The actual node that is the antenna has a small preamp built into it 2 GPS signals are circularly polarized
17. nding e mail to Kantronics include a clear description of the problem and unit name Be sure to include a return fax number mailing address and or e mail address Returns direct to the factory for refund or exchange are strictly regulated The sales department must approve any return for refund or exchange If the unit was recently purchased from one of our authorized dealers contact that dealer first Repair Service Charges Consult the limited warranty policy in this manual for the service provisions offered by Kantronics at no charge This warranty is considered to be in force only when the customer has submitted a completed warranty registration within ten days 10 d of purchase and when the stipulations of the warranty have been met Violations of warranty clauses will automatically void the warranty and cost of service or repairs will be charged to the owner Service outside the warranty period will be charged at the cost of parts labor and return shipping at the time of the repair or service Page 12 of 21 DWG ID 181 0104 00 Date 2006 01 24 Units sent in for service or repair without prior Return Authorization will be subject to the minimum charge for labor plus cost of return shipping and handling Repair or DAMAGE to a unit whether accidental or otherwise is not covered by any warranty provided by Kantronics in which case normal repair charges will apply Contact the Service Department at e 785 842 4476
18. o the TraveLog may add changes to the manual at a later date Send comments or suggest corrections to Kantronics Co Inc 1202 E 23rd Street Suite A Lawrence KS 66046 or e mail sales kantronics com Information in this document is subject to change without notice Contents of this publication or the firmware software within the TraveLog may not be reproduced in any form without the written permission of the copyright owner Published in the United States of America Page 6 of 21 DWG ID 181 0104 00 Date 2006 01 24 7 2 Kantronics Warranty Registration Note Print this page fill out the form and mail in Please take the time to fill out a copy of the warranty registration form and mail it to Kantronics including a copy of your sales receipt to register your purchase Kantronics must receive warranty registration within 10 days of purchase of the Kantronics TraveLog to be valid Both must be on file at Kantronics in order for you to receive warranty service Refer to the warranty policy in this manual for further information Mail form and sales receipt to Kantronics 1202 E 23rd Street Suite A Lawrence KS 66046 Entity Name Address City State Zip Postal Code Country Contact Person s Name Telephone Nr E mail Product TraveLog Serial Nr Date of Purchase Dealer Page 7 of 21 DWG ID 181 0104 00 Date 2006 01 24 8 2 Important Information READ
19. o work with new or existing GPS data you must load the TERRITORY containing the user information you wish to work with or add to IMPORTING GPS DATA We are now ready to import user GPS data To do this select a user from the dropdown list of users in the KML software Next select the USERS menu and then select IMPORT GPS Navigate to the directory and or file where user GPS data is stored Select that users GPS data and click OK Users gps files will have the serial number of the unit they come from embedded within the file name This serial number should match that of the user User GPS files are encrypted and have the serial numbers embedded in them also Trying to open GPS data with non matching serial numbers or if the file appears to have been tampered with will generate an error If user and file serial numbers match the KML software will begin processing the GPS data Be patient this may take a few minutes based on file size and computer speed WHAT IS THE ACK FILE AND WHAT IS ITS PURPOSE Page 16 of 21 DWG ID 181 0104 00 Date 2006 01 24 After GPS data is processed a new encrypted file is generated This is the ACK file This file will be saved to the same location as the original GPS file For example if the user GPS data is stored in C USERS GPS then the ACK file will be generated there as well When the KML 5000 is writing data to a media card it will check for the existence of an ACK file
20. rchase price of the units and do not become the property of the consumer The product to which this warranty applies herein Applicable Products and the period during which the warranty shall apply herein Applicable Warranty Period are as follows Applicable Product KML 5000 TraveLog Applicable Warranty Period Two 2 years from date of purchase 3 1 12 EXCLUSIONS This Limited Warranty does not apply to the cosmetic appearance of the Applicable Product to broken or cracked cabinets to any accessory not supplied by Kantronics which is used with the Applicable Product to any product that has been subject to misuse abuse or over voltage to any product that has been modified by non Kantronics personnel unless specifically authorized in writing by Kantronics or to any product Page 10 of 21 DWG ID 181 0104 00 Date 2006 01 24 damaged or impaired by shipping whether or not caused by poor packaging neglect accident wiring not installed by Kantronics improper parameter settings which are cleared by performing a hard reset or use in violation of instructions furnished by Kantronics or of generally accepted industry practice Kantronics does not warrant that the functions contained in any software will meet your requirements or achieve your intended results or that operation of any software will be uninterrupted or error free or without effect upon other software used with it Responsibility for the selection of the hardware and
21. rnal memory of the KML is only 32 MB so even a 128MB is overkill Figure 3 3 shows some of the more common media card types Figure 3 3 common media cards Page 21 of 21 DWG ID 181 0104 00 Date 2006 01 24
22. tion velocity time in a non volatile internal memory At your convenience the captured history can be transferred from the internal memory to a removable memory card for transport to a personal computer for viewing and analysis This product is optimized for uses such as logging the travel of a fleet of vehicles e g used by pharmacy reps account reps bus drivers Important features include low cost since no cell phone or radio is used convenience and the ability to capture accurate complete location data HOW DOES IT WORK The KML 5000 simply stated is a smart file cabinet When the vehicle ignition is on the KML 5000 locates its position with GPS and then logs that position every couple seconds to a file stored internally When you need to know where a vehicle has been you can download the stored GPS information to a media card and then load it into a PC and view a map with generated data from the media card to give a graphic representation of locations direction speeds etc This can be accomplished with a single user or a whole fleet of vehicles and can even be broken up into territories WHAT SOFTWARE CAN I USE Page 14 of 21 DWG ID 181 0104 00 Date 2006 01 24 Currently Kantronics offers a program that uses Map Point to display data from KML 5000 As of January 2006 a second software package is in development For now the only software suite currently in use is MapPoint To install MapPoint please refer to the
Download Pdf Manuals
Related Search