SAILOR 100 Satellite TV - Polaris Electronics A/S
Contents
1. SATELLITE menu Description POSITION Position of the current satellite RX POLARISATION Linear polarisation HORIZONTAL VERTICAL Circular polarisation LEFT HAND RIGHT HAND RX FREQUENCY Ku band receiving frequency of the active satellite EVENT menu Description lt EVENT gt In this menu all active events are listed Use W and A togo through the active events Events can be of the type WARNING or ERROR For a list of events see Event messages overview on page 1 If a new event occurs or there is a change in the event list while you are in the EVENTS menu a is shown in the upper left corner of the display next to the menu name Press OK to update the EVENTS list the will be removed A gt means the event text is longer than the display Press gt to see the remaining text Example EVENT 1 4 This is the first event out of a list of 4 and there has been a change in the list EVENT 1 4 will always be shown the indicates that there has been a change Keypad and menus of the ACU 17 fo 7 a Chapter 2 Operation Adjusting brightness of the display To adjust the brightness do the following 1 Press and hold OK for a short moment until BRIGHTNESS XXX is displayed XXX is the current brightness value 2 Hold OK pressed press A for lighter or W for darker display 3 Release OK to leave the brightness menu Resetti2. the following user interfaces e Control Panel e Keypad and menus of the ACU S fo 7 a jo There is also a web interface for installation and advanced setup For further details see the SAILOR 100 Satellite TV Installation manual Control Panel The following sections describe how to set up and use the SAILOR 100 Satellite TV using the Control Panel Getting started Creating or editing a profile e Selecting the active profile Deleting a profile Event list Getting started Use the Control Panel for handling and selecting satellite profiles The unit is equipped with a touch screen an external keyboard is not required K When reading status information in this application read carefully whether it is the status information of the ACU or the Satellite TV application on the Control Panel Chapter 2 Operation Navigation and start up To navigate through the user interface you have the following possibilities e Icon in the top right corner to display the main menu e Arrow icon lower left corner for back function and to collapse the on screen keyboard when you do not need it any more z Satellite TV Dashboard SAILOR 100 Eutelsat 16A 16 0E k Main menu 018 6 E Pointing 8 Tracking 1 0 33 0 0 0 Back Unit information collapse keyboard To get started with the Control Panel do as follows 1 Make sure that it is connected to the LAN port 4 at the
3. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design manufacture and intended use of the equipment Thrane 8 Thrane assumes no liability for the customer s failure to comply with these requirements DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE Do not operate the equipment in the presence of flammable gases or fumes Operation of any electrical equipment in such an environment constitutes a definite safety hazard KEEP AWAY FROM LIVE CIRCUITS Operating personnel must not remove equipment covers Component replacement and internal adjustment must be made by qualified maintenance personnel DO NOT SUBSTITUTE PARTS OR MODIFY EQUIPMENT Because of the danger of introducing additional hazards do not substitute parts or perform any unauthorized modification to the equipment Failure to comply with the rules above will void the warranty iii About the manual Intended readers This manual is a user manual for the SAILOR 100 Satellite TV system This manual is intended for anyone who is using or intends to use this system No specific skills are required to operate the SAILOR 100 Satellite TV However it is important that you operate the system according to the guidelines in this manual Manual overview Note that this manual does not cover installation of the system For information on installation refer to the SAILOR 100 Satellite TV Installation manual Part
4. READY Waiting for input from GNSS e g GPS READY no satellite profile selected POINTING ANTENNA Locating the satellite ACQUIRING SIGNAL Acquiring the satellite signal TRACKING Tracks the current satellite FREQUENCY SCAN Scanning for transponders BLOCKING ZONE Antenna is pointing into a blocking zone Keypad and menus of the ACU YD MW F w m 8 Chapter 2 Operation Current menu See The menu tree on page 14 GPS GPS signal is received from the GPS module OK or HDG Ship heading data received from the ship s gyro OK or LAN LAN connectors used 1 2 3 4 SAT Satellite position of currently active satellite profile RX RX polarisation of currently active satellite profile H horizontal V vertical L left hand R right hand RX Rx RF tracking frequency in GHz After 1 hour the display is dimmed to lowest intensity Press any key to light up the display Navigating the menus Use the keypad to navigate the menus lt i gt e Press OK or p gt to select a menu item e Use the arrow keys amp and W to go through the menu items or enter a number digit by digit Use the arrow keys lt q and p gt togo through the settings and move from one digit to the next Press OK to select a setting Press lt again to move one level up If applicable confirm to store the new setting by pressing OK Keypad and menus of the ACU 13 S fe 7 a jo Chapter 2 Operatio
5. SAILOR SAILOR 100 Satellite TV Thrane amp Thrane SAILOR 100 Satellite TV User Manual Document number 98 136311 A Release date September 21 2012 Disclaimer Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane amp Thrane The information in this manual is provided for information purposes only is subject to change without notice and may contain errors or inaccuracies Manuals issued by Thrane amp Thrane are periodically revised and updated Anyone relying on this information should acquire the most current version e g from thrane com or from the distributor Thrane amp Thrane is not responsible for the content or accuracy of any translations or reproductions in whole or in part of this manual from any other source Copyright 2012 Thrane amp Thrane A S All rights reserved Printed in Denmark Trademark Acknowledgements Thrane 8 Thrane is a registered trademark of Thrane amp Thrane A S in the European Union and the United States e SAILOR is a registered trademark of Thrane amp Thrane A S in the European Union and the United States e Product and company names mentioned in this manual may be trademarks or trade names of their respective owners Safety summary The following general safety precautions must be observed during all phases of operation service and repair of this equipment
6. T 7309A SAILOR 100 Satellite TV Above Deck Unit PN 407309A THR TT 6007A SAILOR 6007 Message Terminal Android PN 406007A AND Equipment Applicability The TT 7390A SAILOR 100 Satellite TV is an antenna system used worldwide for receiving TV signals Declaration The safety requirement with respect to the LVD directive 2006 95 EC is met by conforming to the harmonized EU standards EN 60950 1 and EN 60950 22 The protection requirement with respect to the EMC directive 2004 108 EC is met by conforming to the harmonized EU standards EN 60945 Manufacturer Thrane amp Thrane A S Lundtoftegardsvej 93D DK 2800 Kgs Lyngby Denmark Porsvej 2 DK 9200 Aalborg SV Denmark Place and Date Kgs Lyngby 20 September 2012 Lad CE Walther Thygeserj CEO Thrane amp Thrane A S Doc no 99 137009 A Page 1 of 1 Thrane amp Thrane A S Lundtoftegaardsvej 93 D DK 2800 Kgs Lyngby Denmark T 45 3955 2800 F 45 3955 88 88 info thrane com www thrane com Bank Danske Bank Comp reg 65 72 46 18 VAT DK 20 64 64 46 A ACU display menus and keypad 12 ACU LEDs 20 back function 4 brightness in display 18 C CE compliance 23 conformity 23 Control Panel IP address 11 navigation 4 software version 11 coverage 6 create satellite profile 5 D Declaration of Conformity 24 delete satellite profile 9 dim display 5 display brightness 18 dim 5 menu descriptions 15 menu tree 14 menus and keyp
7. a maritime satellite TV antenna for high quality worldwide TV reception It consists of the following units Above Deck Unit ADU e Antenna Control Unit ACU Control Panel Thrane amp Thrane ADU ACH Control Panel To TV distribution A Multiswitch or a SAILOR Transmodulator can be connected for TV distribution During installation all setup tasks are taken care of The system is easy to use You only have to select a new satellite profile if you wish to watch channels on a different satellite or you do not have coverage from the currently selected satellite If necessary you can add further satellite profiles to the list that has been created during installation Chapter 1 Introduction User interfaces Control Panel for handling satellite profiles The user interface of the SAILOR 100 Satellite TV is the Control Panel It has a touch screen You can tap through settings and menus to handle satellite profiles show status information and system messages The following screen shows the Dashboard zy Satellite TV Dashboard EJ SAILOR 100 Eutelsat 16A 16 0E system Statu Pointing Tracking Unit information ACU display for status and system parameters You can view status and system parameters in the display of the ACU MAIN TRACKING Power TWVReady Felpa SAT 151 2 H RX H 11 362 2 User interfaces Chapter 2 Operation The SAILOR 100 Satellite TV has
8. able the following general instructions should be used for repacking with commercially available material 4 5 Wrap the defective unit in heavy paper or plastic Attach a tag indicating the type of service required return address part number and full serial number Use a strong shipping container e g a double walled carton Protect the front and rear panel with cardboard and insert a layer of shock absorbing material between all surfaces of the equipment and the sides of the container Seal the shipping container securely Mark the shipping container FRAGILE to ensure careful handling Failure to do so may invalidate the warranty Service and repair Appendix A Conformity SAILOR 100 Satellite TV CE LVD amp EMC The Thrane SAILOR 100 Satellite TV is CE certified LVD amp EMC directives as stated in the Declaration of Conformity with LVD and EMC Directives enclosed in copy on the next page 23 gt o 2 i oO Thrane Thrane Thrane 8 Thrane A S Declaration of Conformity with LVD and EMC Directives The undersigned of this letter declares that the following eguipment complies with the specifications of EC directive 2006 95 EC concerning Low Voltage Safety and EC directive 2004 108 EC concerning EMC Eguipment included in this declaration TT 7390A SAILOR 100 Satellite TV Consisting of TT 7300A SAILOR 100 Satellite TV Antenna Control Unit PN 407300A T19 T
9. ad 12 navigation 13 DVB S 7 DVB S2 7 E edit satellite profile 5 error messages 21 event list 21 view 10 events display in Control Panel 10 I IP address Control panel 11 K keyboard 3 collapse 4 L LEDs on ACU 20 light indicators in ACU 20 M main menu 4 manual order number i menu descriptions 15 tree 14 menus navigate 13 menus in ACU display 12 25 Index navigate Control Panel 4 display menus 13 0 order number manual i P packing for shipment 21 polarisation 6 DVB S 7 power on 4 profile create or edit 5 delete 9 select active 8 R repair 21 reset 18 keys on ACU 18 system 18 S safety summary iii satellite profile create or edit 5 delete 9 select active 8 select satellite profile 8 26 service 21 shipment 21 software version ACU 11 control panel 11 start up 4 system ACU reset 18 system reset 18 T tracking properties 6 wW warranty 21 98 136311 A info thrane com thrane com Thrane amp Thrane
10. ed using the web interface or the Control Panel EVENTS View system events Active events are shown as X ACTIVE EVENTS in the MAIN display Press OK to update the list Menu descriptions ANTENNA Pas Description menu POINTING ANTENNA Current state of the antenna ELEVATION Current elevation angle of the antenna AZIMUTH Current azimuth of the antenna with reference to North POLARISATION RX POLARISATION Setting of polariser Keypad and menus of the ACU 15 Chapter 2 Operation ANTENNA Description menu GPS LATITUDE current latitude read from GPS module LONGITUDE current longitude read from GPS module FIX TYPE 3D or NONE HEADING Ship s heading in degrees with reference to North provided by the ship s gyro VERSIONS Current software version SERIAL ACU ACU serial number NUMBERS ADU Serial number of the antenna NETWORK menu Description PORT 1 2 IP Current IP address for LAN 1 and LAN 2 MASK 1 2 Current netmask for LAN 1 and LAN 2 PORT 3 IP LAN 3 Current IP address of the SAILOR 100 Satellite TV web interface default 192 168 0 1 MASK 3 LAN 3 Current netmask of the SAILOR 100 Satellite TV web interface default 255 255 255 0 PORT 4 IP Current IP address for LAN 4 MASK 4 Current netmask for LAN 4 DEFAULT GATEWAY Current default gateway 16 Keypad and menus of the ACU Chapter 2 Operation
11. errors are indicated by a yellow triangle on the Dashboard page of the Control Panel To see further info see Event list on page 10 Service and repair Should your Thrane amp Thrane product fail please contact your dealer or installer or the nearest Thrane amp Thrane partner You will find the partner details on thrane com where you also find the Thrane amp Thrane Self Service Center web portal which may help you solving the problem ej Cc T o n A 2 gt 2 Your dealer installer or Thrane 8 Thrane partner will assist you whether the need is user training technical support arranging on site repair or sending the product for repair Your dealer installer or Thrane amp Thrane partner will also take care of any warranty issue Repacking for shipment Should you need to send the product for repair please read the below information before packing the product The shipping carton has been carefully designed to protect the SAILOR 100 Satellite TV and its accessories during shipment This carton and its associated packing material should be used when repacking for shipment Attach a tag indicating the type of service required return address part number and full serial number Mark the carton FRAGILE to ensure careful handling Note Correct shipment is the customer s own responsibility Troubleshooting guide 21 Chapter 3 Troubleshooting 22 If the original shipping carton is not avail
12. file 3 From the list of existing profiles select the new profile Select Profile to Activate Amazonas 61W 061 0 W Amazonas 1 Amos 5 17 0E 017 0 E Amos 5 Claro Panama 50W 050 0 W Intelsat 1R IS 1 DirectTV 95w 095 1 W Galaxy 3C G 3C Eutelsat 16A 16 0E 016 0 E Eutelsat 16A Hispasat 030 0 W Hispasat 1D NSS 806 040 5 W NSS 806 SatMex6 113 0 W SatMex 6 4 A confirmation window is displayed Verify activation of the selected profile and tap OK to accept 5 The Dashboard is displayed again and the new profile is selected An azimuth adjustment is made if enabled during installation and the antenna turns to the new position and starts acquiring signal from the new satellite 8 Control Panel Chapter 2 Operation Deleting a profile You can delete profiles that you don t use anymore You cannot delete the currently active profile To delete a profile do as follows 1 Tap the menu icon lei Select Settings S fo 5 7 a Select Delete profile Tap the profile you want to delete Sh ge ue Te A confirmation window is displayed Verify the profile name you want to delete and press OK to accept Control Panel 9 Chapter 2 Operation Event list This list provides active events and history of the system Notifications are earlier events they are cleared after 24 hours There are two ways to display the Event list Tap the menu icon and tap Even
13. g Linear when the TV signal is transmitted with Circular polarisation or vice versa results in a 3 dB loss in signal strength Hence this setting cannot be verified by presence of TV signal alone 1 For more information see e g www lyngsat com or www satbeams com Linear signals are marked with the letter H for Horizontal or V for Vertical Circular signals are marked with either L for Left hand or R for Right hand 6 Control Panel Chapter 2 Operation DVB S DVB S2 By selecting DVB S DVB S2 it is possible to configure the system to track a specific transponder Polarisation Linear Horizontal Linear Vertical Circular Left hand or Circular Right hand e Tracking frequency Frequency of the transponder e g 11 362 GHz e Symbol rate Mega symbols per second e g 27 500 MS s S fo 5 7 o jo Note 4 jit is highly recommended always to use Automatic tracking 7 Tap Save to save the satellite profile 8 An information window is displayed Verify the data for the new profile and tap OK to close the window Control Panel 7 Chapter 2 Operation Selecting the active profile To change the active profile select another profile from the list of created profiles Note 4 When you select another profile the antenna moves to the new position and goes through the acquisition procedure This may take a couple of minutes Do as follows 1 Tap the menu icon lei 2 Select Activate pro
14. i bebe rants toba ne kia pravda oiea ka 3 Getting Started E A E EE 3 Creating or editing a profile cccsssccccesssssssscececeseesrenseess 5 Selecting the active profile scccccsssssssssscccessssstseeececeseeees 8 Deleting a profiles ei ah 9 BEE o E OE OE AVE ROVAN 10 ET OO ER PRE AL 11 ADON saaran ROE EO ME O OO OMOTI 11 Keypad and menus of the ACU ou eeccseesesseesssseeseeseeeees 12 ACU display and keypad cssccccsssssceessscesesseseesssneeeeseaneess 12 Navigating the menus cssscccesssseecesseceesssseecesseesesseseceenes 13 The menmi Wee as nani ee rics veces vek eki 14 Adjusting brightness of the display 18 Resetting the system ccccssscccsssseccssseseessssccssseeeeeseseceeees 18 Troubleshooting LEDs On the ACU sina isis oe elds ceadeateves 20 Troubleshooting guide cscccsessseecsssssessssesseeseessesssenees 21 Error messages seiere kani sass cteovigstsssencsievitesteisvisdectatenseices 21 Service dndiTEPAlT issijiiasas svaka pain aka 21 Repacking for Shipment ccccsssscscsssecessssseecesseeesessseceenes 21 vii Table of contents App A Index viti Conformity SAILOR 100 Satellite TV jini kajne dni akne CE UVD 8EMC sesssssssssdectedssiecssesnsasesseseosdeencssessrenes zeva kovna Chapter 1 Introduction le I v sj nej le SAILOR 100 Satellite TV The SAILOR 100 Satellite TV is
15. n The menu tree In the menu tree you can see how the system has been configured You can also enter satellite information directly if itis necessary to change the satellite information and you cannot use a connected PC and the web interface ANT 1 POINTING ANTENNA STATE POLARISATION ELEVATION GPS AZIMUTH HEADING VERSIONS ANT 2 SERIAL NUMBERS RX POLARISATION ANT 3 PORT 1 2 IP LATITUDE PORT 1 2 MASK LONGITUDE PORT 3 IP FIX TYPE PORT 3 MASK PORT 4 IP ANT 4 PORT 4 MASK DEFAULT GATEWAY HEADING ANT 5 SAT SW VERSION POSITION RX POLARISATION RX FREQUENCY ACU ADU EVENT lt EVENT 1 gt lt EVENT 2 gt lt EVENT gt lt EVENT n gt 14 Keypad and menus of the ACU Chapter 2 Operation Top level menu Top level Description menu MAIN View with current status of the SAILOR 100 Satellite TV This view is displayed after a time out of 10 minutes Press any key except left arrow to enter the menu at MAIN fo 7 o New events are shown in this display If an eventis displayed press OK to jump directly to the menu EVENTS for viewing the currently active events ANTENNA Shows the current ADU parameters position software version and serial numbers of the ADU and ACU NETWORK Shows the IP addresses and netmasks of the LAN connectors of the ACU SATELLITE Current satellite information This information is select
16. ng the system To reset the system do the following 1 Pressand hold 4 and W until the ACU display shuts down and the ACU reboots MAIN GPS3OK HDGSOK LANs 1 TRACKING 2 Wait until the system has rebooted and is operational again The last active satellite profile will be used 18 Keypad and menus of the ACU Chapter 3 Troubleshooting This chapter gives guidelines for troubleshooting and provides an overview of the different means of status signalling It has the following sections e LEDs on the ACU e Troubleshooting guide e Error messages e Service and repair D i T o n du 2 gt ped Chapter 3 Troubleshooting LEDs on the ACU The ACU has 3 LEDs Power TV Ready and Fail Pass LED 20 LED Behavior Description Power Steady green Power supply OK Steady red Power supply failure Off No power TV Ready Steady green Tracking satellite Off Not tracking satellite Fail Pass Steady red A fault which prevents operation is present in LED the system ACU ADU Flashing green A Power On Self Test POST or Person Activated Self Test PAST in progress The current status is displayed Flashing red Active BITE Built In Test Equipment failure or warning The event is shown in the ACU display Steady green No faults LEDs on the ACU Chapter 3 Troubleshooting Troubleshooting guide Error messages Active
17. numbers for related manuals are listed in the next section This manual has the following chapters Introduction contains a brief description of the system e Operation explains how to start up and use the system e Troubleshooting contains a short troubleshooting guide and information on service and repair Related documents Typography The below list shows the documents related to this manual and to the SAILOR 100 Satellite TV system Title and description Document number SAILOR 100 Satellite TV Installation manual 98 136280 Control Panel Installation manual TT 6006A 98 130088 and TT 6007A Message Terminal SAILOR Transmodulator Installation manual 98 136455 In this manual typography is used as indicated below Bold is used for the following purposes To emphasize words Example Do not touch the antenna e To indicate what the user should select in the user interface Example Select SETTINGS gt LAN Italic is used to emphasize the paragraph title in cross references Example For further information see Connecting Cables on page vi Chapter 1 Chapter 2 Chapter 3 Table of contents Introduction SAILOR 100 Satellite TV 1 User Ne aces isinir n ieas 2 Control Panel for handling satellite profiles 2 ACU display for status and system parameters 2 Operation Control Panel sysniinei
18. rear of the ACU possibly through a switched network Note 4 If connected directly to the ACU make sure that the DHCP server has been enabled on that port For details on ACU network configuration see the SAILOR 100 Satellite TV Installation manual 2 Press the on off button A couple of start up screens are displayed Wait until the Dashboard is displayed ACU connection OK e System status information e g TRACKING When a yellow triangle is displayed in the section ACU Connection the ACU is not ready for operation 4 Control Panel Chapter 2 Operation 3 The Dim button is used to dim the light in the Control Panel Push and hold to dim the display more less Each new push changes direction between more and less Now you can create satellite profiles Creating or editing a profile To create or edit a profile i e satellite profile do as follows 1 Tap the menu icon g 2 Select Settings 3 Select Create profile or Edit profile Edit Profile Antenna setup f DirectTV 95w 095 1 W Galaxy 3C G 3C e Automatic DVB S DVB S2 Linear Horizontal Vertical Cancel 4 Fillin or edit the satellite profile name Note 4 It is helpful to assign a name containing the location where the Satellite profile is to be used e g Gulf of Mexico or North Sea and possibly the provider Control Panel 5 S fo 5 7 a Chapter 2 Operation 5 Tap the field Sa
19. t list or 1 Tap the yellow triangle CA in the lower right corner of the Control Panel Nee alarms notifications gt Active Events 2 Tap Active events 10 Control Panel Chapter 2 Operation Help Tap the menu icon and tap Help Help provides a description how to handle satellite profiles Scroll through the help or use the links at the start to jump to a specific topic About Tap the menu icon and tap About About provides the following information S fo 5 7 a e Software version of the SAILOR 100 Satellite TV application Software version of the ACU is shown on the Dashboard page in the section Unit information IP address of the Control Panel e Legal Notices with software licence information Control Panel 11 Chapter 2 Operation Keypad and menus of the ACU The following sections describe how to use the keypad and view the menus of the SAILOR 100 Satellite TV e ACU display and keypad e Navigating the menus e The menu tree e Adjusting brightness of the display e Resetting the system ACU display and keypad 12 In the ACU display you can see the current state of the system You can also see events warnings errors and information and how the system has been configured Use the keypad to navigate through the menu tree MAIN GPS OK HDG OK LAN 1 TRACKING 6 7 8 Signal strength 1 Current status of the SAILOR 100 Satellite TV NOT
20. tellite A new window is displayed Tap and scroll to find the wanted satellite then tap on a satellite to select it The list is sorted as follows 180 W gt 0 gt 180 E Profile handling Default satellite in the list Create new profile The satellite closest to the ship s position is highlighted Edit profile The satellite currently selected for this profile is highlighted Note 4 At some longitudes multiple satellites are co located In this case it is not important which is chosen as long as the longitude is correct The chosen satellite will be the one the system tracks but it will receive and forward the TV signals from all the co located satellites 6 Configure the tracking properties Automatic The system will automatically determine which signal to track on based on an automatic frequency and transponder scan of the satellite Note 4 During frequency and transponder scan TV reception is possible Thus Automatic tracking is not slower than manually configured tracking parameters If the vessel moves out of coverage of the transponder currently being tracked the system will initiate a new frequency and transponder scan and find another transponder to track on the same satellite assuming the vessel is still in coverage of the satellite e Polarisation Select Linear or Circular depending on the polarisation with which your provider transmits the TV signals Note 4 Selectin
Download Pdf Manuals
Related Search