USER`S MANUAL - Icon Heath & Fitness
Contents
1. 14 Route the Long Cable 23 around the V Pulley 6 on the Left Arm 47 Be sure that the Cable is in the groove of the Pulley and that the Long Cable Trap 50 is posi tioned to hold the Cable in place Tighten the 3 8 x 2 1 2 Bolt 7 and the 3 8 Nylon Locknut not shown 16 9 CABLE ASSEMBLY 15 Route the Long Cable 23 around the V Pulley 6 on the Right Arm 48 Be sure that the Cable is in the groove of the Pulley and that the Long Cable Trap 50 is turned to hold the Cable in place Tighten the 3 8 x 2 1 2 Bolt 7 and the 3 8 Nylon Locknut not shown Route the Long Cable 23 around the 3 1 2 Pulley 15 attached to the Pulley Bracket 20 Be sure that the Cable 15 in the groove of the Pulley and that the Cable Trap 66 is turned to hold the Cable in place Tighten the 3 8 x 2 Bolt 12 and the 3 8 Nylon Locknut not shown Be sure that the 5 16 x 5 Bolt 68 is proper ly tightened and that the Pulley Bracket 20 can move freely Refer to the inset drawing If the 3 1 2 Pulley 15 is pre attached to the Long U Bracket 57 remove it Wrap the Long Cable 23 around the 3 1 2 Pulley Attach the Pulley and two Pulley Covers 78 to the indicated hole in the Long U Bracket with a 3 8 x 2 Bolt 12 and a 3 8 Nylon Locknut 21 Make sure that the Pulley Covers are turned so the wide tabs are on the indica2. Use the WEIGHT RESISTANCE CHART on page 19 to find the actual amount of resistance at each weight station Note 1 kg 2 2 lbs ATTACHING THE LAT BAR OR NYLON STRAP TO THE HIGH PULLEY STATION Attach the Lat Bar 54 to the Long Cable 23 with a Cable Clip 53 For some exercises the Chain 52 should be attached between the Lat Bar and the Long Cable with two Cable Clips Adjust the length of the Chain between the Lat Bar and the Long Cable so the Lat Bar is in the correct starting position for the exercise to be performed The Nylon Strap 39 not shown can be attached in the same manner ATTACHING THE LAT BAR OR NYLON STRAP TO THE LOW PULLEY STATION Attach the Lat Bar 54 to the Short Cable 58 with a Cable Clip 53 For some exercises the Chain 52 should be attached between the Lat Bar and the Pulley Cable with two Cable Clips Adjust the length of the Chain between the Lat Bar and the Short Cable so the Lat Bar is in the correct starting position for the exercise to be performed The Nylon Strap 39 not shown can be attached in the same manner 17 31 Make sure that all parts have been properly tightened The use of the remaining parts will be explained in 11 During steps 11 through 25 refer to the ADJUSTMENT beginning on page 17 of this manual CABLE DIAGRAM on page 21 of this manual to verify proper cable routing Before be
3. assist you please note the product model number and serial number before calling The model number is WEEVSY87111 The serial number can be found on a decal attached to the WEIDER 8510 see the front cover of this manual Before reading further please review the drawing below and familiarise yourself with the parts that are labelled AN RA High Pulley Station ee Butterfly Arms Backrest Press Arm Leg Lever Foot Plate Weight Stack Weight Pin i Low Pulley Station CABLE DIAGRAM The cable diagram below shows the proper routing of the Short Cable 58 and the Long Cable 23 Use the diagram to be sure that the two cables and the cable traps have been assembled correctly If the cables have not been correctly routed the home gym system will not function properly and damage may occur The numbers show the correct route for each cable The starting and ending points of each cable are labelled Be sure that the cable traps do not touch or bind the cables 1 High Pulley R AR 4 Long Cable 23 TOP VIEW 6 Nip ao 5 Long U Bracket Short Cable 58 Weight Stack 8 A 1 Low Pulley N TROUBLESHOOTING AND MAINTENANCE ASSEMBLY Inspect and tighten all parts each time you use the home gym system Replace any worn parts immediately The home gym system can be cle
4. 3 onto each Carriage Bolt The high side of the bracket on the Rear Upright must be on the side shown Do not tighten the Nylon Locknuts yet that all parts are oriented as shown in the drawings e Tighten all parts as you assemble them unless instructed to do otherwise THE FOLLOWING TOOLS NOT INCLUDED ARE REQUIRED FOR ASSEMBLY two 2 adjustable spanners one 1 standard screwdriver one 1 phillips screwdriver one 1 rubber mallet lubricant such as grease or petroleum jelly and soapy water will also be needed Assembly will be more convenient if you have the following tools A socket set a set of open end or closed end spanners or a set of ratchet spanners High Side of Bracket FRAME ASSEMBLY 2 Slide the Front Upright 42 onto the 5 16 x WEIGHT RESISTANCE CHART 2 1 2 Carriage Bolts 1 in the Base 4 Hand tighten a 5 16 Nylon Locknut 3 onto each Carriage Bolt Do not tighten the Nylon Locknuts yet This chart shows the approximate weight resistance at each station Top refers to the 6 5 lbs top weight The other numbers refer to the 12 5 lbs weight plates Weight resistance shown for the butterfly arm station is for each butterfly arm Press a 1 Square Inner Cap 65 into the Front Upright 42 WEIGHT PRESSARM BUTTERFLYARM LEGLEVER HIGH PULLEY LOW PULLEY PLATES lbs lbs lbs Ibs Ibs Note 1 kg 2 2 lb
5. 73 between the Pulley and the Press Frame 17 Do not tighten the 3 8 Nylon Locknut 21 yet Be sure that the 3 8 x 3 3 4 Bolt 71 the 3 8 Washer 9 the 5 8 x 9 16 Spacer the 3 1 2 Low Pulley and the 3 8 Nylon Locknut are oriented as shown Locate the Short Cable 58 Route the Short Cable under the 3 1 2 Low Pulley 77 Be sure that the end of the Cable with the ball is on the indicated side of the Press Frame 17 and that the Cable is between the Pulley and the crossbar on the Press Frame Tighten the 3 8 Nylon Locknut 21 and the 3 8 x 3 3 4 Bolt not shown 11 Ball Crossbar CABLE ASSEMBLY 21 22 23 If the indicated 3 1 2 Pulley 15 is pre attached to the Front Upright 42 remove it Route the Short Cable 58 around the Pulley Attach the Pulley and two Pulley Covers 78 to the lower hole in the Front Upright with the 3 8 Nylon Jam Nut 81 the 3 8 Washer 9 and the 3 8 x 3 3 4 Bolt 71 Route the Short Cable 58 around the 3 1 2 Pulley 15 attached to the upper hole in the Press Frame 17 Be sure that the Cable Trap 66 is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown Tighten the 3 8 Nylon Locknut 21 and the 3 8 x 3 1 2 Bolt not shown If the indicated 3 1 2 Pulley 15 is pre attached to the Front
6. Right Arm is behind the indicated bracket on the Top Frame 55 Tap two 1 Retainers 69 and a 1 Round Cover Cap 70 onto the right axle Be sure that the teeth on the Retainers bend toward the Cover Cap as shown in the inset drawing Attach the Left Arm 47 in the same manner Press 1 3 4 Square Inner Caps 44 into the lower ends of the Right and Left Arms 47 48 Wet the lower end of each Arm with soapy water Slide a 10 Pad 45 onto the lower end of each Arm Welded Brackets ADJUSTMENT The instructions below describe how each part of the home gym system can be adjusted IMPORTANT When attaching the lat bar or nylon strap make sure that the attachments are in the correct starting position for the exercise to be performed If there is any slack in the cables or chain as an exercise is performed the effectiveness of the exercise will be reduced CHANGING THE WEIGHT SETTING To change the weight setting of the weight stack insert a Weight Pin 26 under the desired Weight 25 Be sure to insert the Weight Pin until the bent end of the Weight Pin is touching the Weights and turn the bent end downward The weight setting of the weight stack can be changed from 6 5 Ibs to 81 5 lbs in increments of 12 5 lbs Note Due to the cables and pulleys the actual amount of resis tance at each exercise station may vary from the weight setting
7. Upright 42 remove it Route the Short Cable 58 around the Pulley Attach the Pulley and two Pulley Covers 78 to the upper hole in the Front Upright with the 3 8 Nylon Jam Nut 81 the 3 8 Washer 9 and the 3 8 x 3 3 4 Bolt 71 12 CABLE ASSEMBLY 24 25 Attach the end of the Short Cable 58 to the Long U Bracket 57 with a 1 4 Nylon Lock nut 2 and a 1 4 Washer 10 Do not com pletely tighten the Nylon Locknut It should be threaded onto the end of the Cable so only a couple of threads are showing above the nut as shown in the inset drawing Attach the Long Cable 23 to the Small U Bracket 67 with a 1 4 Nylon Locknut 2 and a 1 4 Washer 10 Do not completely tighten the Nylon Locknut It should be threaded onto the end of the Cable only a couple of turns as shown in the inset drawing Attach the Small U Bracket 67 to the Weight Tube 63 with the 5 16 x 1 3 4 Bolt 72 and a 5 16 Nylon Locknut 3 13 REMOVE THIS PART IDENTIFICATION 3 4 Round Inner Cap 34 CHART FROM THE MANUAL Sooo 1 Round Cover Cap 70 This chart is provided to help you identify the small parts used in assembly Important Some parts C may have b
8. off the Front Upright 42 ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION To use the Leg Lever 29 the seat must be attached to the front upright see ATTACHING AND REMOV ING THE SEAT above Attach one end of the Chain 52 to the Short Cable 58 with a Cable Clip 53 Attach the other end of the Chain to the 3 8 x 2 Eyebolt 35 with a Cable Clip LOCKING THE WEIGHT STACK When the home gym system is not in use the Lock Pin 79 and Lock 80 should be attached Insert the Lock Pin through a Weight Guide 62 Attach the Lock to the Lock Pin 18 FRAME ASSEMBLY ARM ASSEMBLY 5 Press the Weight Tube Bumper 64 into the end of the Weight Tube 63 Insert the Weight Tube into the stack of Weights 25 Be sure that the pins on the Weight Tube are resting in the pin grooves in the upper Weight Lubricate the insides of the holes in the Top Weight 76 Set the Top Weight onto the stack of Weights 25 Insert both Weight Guides 62 into the stack of Weights 25 Be sure that the holes in the Weight Guides are at the top as shown Attach the upper ends of the Weight Guides 62 to the Top Frame 55 with the 5 16 x 6 Bolt 60 two 1 2 x 3 4 Spacers 61 and a 5 16 Nylon Locknut 3 Be sure that the Pulley Bracket 20 is in front of the right Weight Guide 62 as shown Press a 1
9. x 2 1 4 Bolt 75 2 1 x 7 8 Plastic Bushing is especially important for persons over the age of 35 or persons with pre existing health problems 34 4 3 4 Round Inner Cap 76 1 Top Weight Read all instructions before using ICON assumes no responsibility for personal injury or property 35 4 3 8 x 2 Eyebolt 27 1 3 1 2 Low Pulley damage sustained by or through the use of this product 36 1 Seat Frame 78 6 Pulley Cover 37 1 Seat Plate 79 1 Lock Pin 38 1 1 4 x 2 Carriage Bolt 80 1 Lock 39 1 Nylon Strap 81 2 3 8 Nylon Jam Nut 40 1 Seat Knob 82 2 Round Inner Cap 41 1 Backrest 1 User s Manual 42 1 Front Upright Note indicates a non illustrated part Specifications are subject to change without notice 22 BEFORE YOU BEGIN Thank you for selecting the versatile WEIDER 8510 Home Gym System The WEIDER 8510 offers a selection of weight stations designed to develop every major muscle group of the body Whether your goal is to tone your body build dramatic muscle size and strength or improve your cardiovascular system the WEIDER 8510 will help you to achieve the specific results you want For your benefit read this manual carefully before using the WEIDER 8510 Home Gym System lf you ASSEMBLED DIMENSIONS a Height 183 cm 76 in Width 87 cm 38 in Length 135 cm 53 in R 1 have additional questions please call our Customer Service Department at 08457 089 009 To help us
10. 2 Carriage Bolt 38 ANNAN 5 16 x 5 Bolt 68 5 16 x 6 Bolt 60 1 1 8 x 2 1 2 Plastic Bushing 74 OL 1 x 7 8 Plastic Bushing 75 ANA 3 8 x 2 Bolt 12 AAA 3 8 2 1 2 Bolt 7 AMA 5 16 x 2 1 4 Bolt 33 1 Retainer 69 AY E 3 8 x 3 1 2 Bolt 16 MAN 3 8 x 3 3 4 Bolt 71 Cable Clip 53 3 8 x 8 Bolt 59
11. 2 10 Pad 1 Itis the responsibility of the owner to ensure 9 Always stand on a foot plate when perform 4 1 Base 46 2 Press Arm that all users of the home gym system are ing an exercise that could cause the home 5 1 Stabiliser 47 1 Left Arm adequately informed of all precautions gym system to tip 6 3 Y Pulley 48 1 Right Arm 7 3 3 8 x 2 1 2 Bolt 49 4 1 Round Inner Cap 2 Read all instructions in this manual and in 10 Never release the press arm butterfly arms 8 4 5 16 Washer 50 3 Long Cable Trap the accompanying literature before using the leg lever lat bar or nylon strap whilst 9 5 3 8 Washer 51 2 2 Square Outer Cap home gym system weights are raised The weights will fall with 10 6 1 4 Washer 52 1 Chain great force 11 4 5 16 x 2 3 4 Bolt 53 2 Cable Clip 3 If you feel pain or dizziness at any time 12 3 3 8 x 2 Bolt 54 1 Lat Bar whilst exercising stop immediately and 11 Inspect all cables before each use Make 13 1 Seat 55 1 Top Frame begin cooling down sure that the cables remain on the pulleys at 14 3 5 16 x 2 3 4 Carriage Bolt 56 1 Rear Upright all times If the cables bind whilst you are 15 7 3 1 2 Pulley 57 1 Long U Bracket 4 Use the home gym system only on a level exercising stop immediately and make sure 16 1 3 8 x 3 1 2 Bolt 58 1 Short Cable surface Cover the floor or carpet beneath that the cables are on all of the pulleys 17 1 Press Frame 59 1 3 8 x 8 Bolt the home gy
12. ORDERING REPLACEMENT PARTS To order replacement parts contact the ICON Fitness Lifestyle Ltd office or write ICON Health amp Fitness Ltd Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds LS11 8JG UK Tel 08457 089 009 Outside the UK 0 044 113 387 7133 Fax 0 044 113 387 7125 When ordering parts please be prepared to give the following information 1 the MODEL NUMBER OF THE PRODUCT WEEVSY87111 2 the NAME OF THE PRODUCT WEIDER 8510 Home Gym System 3 the SERIAL NUMBER OF THE PRODUCT see the front cover of this manual 4 the KEY NUMBER and DESCRIPTION of the part s see the PART LIST on page 22 of this manual Pant No 185271 RO902A Printed in Canada 2002 ICON Health amp Fitness Inc Model No WEEVSY87111 Serial No Write the serial number in the space above for reference Serial Number Decal QUESTIONS As a manufacturer we are com mitted to providing complete customer satisfaction If you have questions or if there are missing or damaged parts please call 08457 089 009 Or write ICON Health Fitness Ltd Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds LS11 8JG UK email csuk iconeurope com 44 CAUTION Read all precautions and instruc tions in this manual before using this equipment Save this manual for future reference IDERSSIO USER S MANUAL Visit our website at Q w
13. aned using a damp cloth and mild non abrasive detergent Do not use solvents Before beginning assembly carefully read the e As you assemble the home gym system be sure TIGHTENING THE CABLES Woven cable the type of cable used on the home gym system can stretch slightly when it is first used If there is slack in the cables before resistance is felt the cables should be tightened Slack can be removed from the cables by tightening the 1 4 Nylon Locknuts 2 at the end of the Long Cable 23 see drawing 1 and at the end of the Short Cable 58 see drawing 2 To do this you may need to remove the Small U Bracket 67 from the Weight Tube not shown or remove the 3 1 2 Pulley 15 from the Long U Bracket 57 Make sure that the cables are not too tight or the Top Weight 76 will be lifted off the weight stack Additional slack can be removed by moving the 3 1 2 Pulley 15 to the other hole in the Long U Bracket 57 Remove the 3 8 Nylon Locknut 21 and the 3 8 x 2 Bolt 12 from the Pulley Pulley Covers 78 and U Bracket Re attach the Pulley and the Pulley Covers Be sure that the Cable and Pulley move smoothly Note Inspect all cables before each use If a cable tends to slip off the pulleys often the cable may have become twisted Remove the cable and re install it If the cables need to be replaced see ORDERING REPLACEMENT PARTS on the back cover of this manual Replace a
14. arriage Bolt 38 into the centre hole in the Seat Plate 37 Attach the Seat Plate to the Seat 13 with two 1 4 x 3 4 Screws 18 Insert the 1 4 x 2 Carriage Bolt 38 into the indicated hole in the Seat Frame 36 Tighten a 1 4 Nylon Locknut 2 with a 1 4 Washer 10 onto the Carriage Bolt Attach the other end of the Seat 13 to the Seat Frame 36 with a 1 4 Washer 10 and the 1 4 x 2 Screw 24 Press a 1 1 2 Square Inner Cap 32 into the Leg Lever 29 Lubricate the 5 16 x 2 1 4 Bolt 33 Attach the Leg Lever 29 to the Seat Frame 36 with the 5 16 x 2 1 4 Bolt and a 5 16 Nylon Locknut 3 Do not overtighten the Nylon Locknut The Leg Lever must be able to pivot freely Insert the 3 8 x 2 Eyebolt 35 into the Leg Lever 29 from the direction shown Tighten a 3 8 Nylon Locknut 21 with a 3 8 Washer 9 onto the Eyebolt 14 CABLE ASSEMBLY 19 20 Note This assembly step shows how to complete the assembly of several pre attached parts The 5 8 x 9 16 Spacer 73 has been pre attached on the outside of the 3 1 2 Low Pulley 77 for shipping purposes Remove the 3 8 Nylon Locknut 21 the Spacer and the Pulley from the 3 8 x 3 3 4 Bolt 71 Do not remove the Bolt The Bolt has been shown removed for part identification Reattach the 3 1 2 Low Pulley 77 with the 5 8 x 9 16 Spacer
15. een pre assembled for shipping purposes if you cannot find a part in the parts bags check to see if it has been pre assembled 1 2 x 3 4 Spacer 61 5 8 x 9 16 Spacer 73 1 Round Inner Cap 49 28 No J 1 3 4 Square Inner Cap 44 1 1 2 Square Inner Cap 32 G G Please Note The assembly is divided into four stages 1 frame assembly 2 press and butterfly arm assembly 3 cable and pulley assembly and 4 seat and backrest assembly The hardware for each stage is packaged separately Wait until you begin each assembly stage to open that parts bag Ne 2 Square Inner Cap 27 N 2 2 Square Outer Cap 51 11 Non ti 000881 1 4 x 2 Screw 24 O H 5 16 Nylon Locknut 3 oat CMM O 3 8 Nylon Jam Nut 81 1 4 x 2 1 2 Screw 43 O 3 8 Nylon Locknut 21 LEY 5 16 x 1 3 4 Bolt 72 1 4 Washer 10 O AN e 5 16 x 2 1 2 Bolt 22 C 5 16 Washer 8 MN 5 16 x 2 3 4 Bolt 11 3 8 Washer 9 1 MA 5 16 x 2 1 2 Carriage Bolt 1 4 x 3 4 Screw 18 A ee 1 4 x
16. gin Before using the home gym system pull each cable a few times to be sure that the cables move smoothly ning this section identify the Long Cable 23 over the pulleys If one of the cables does not move smoothly find and correct the problem IMPORTANT and the Short Cable 58 by comparing the the cables are not properly installed they may be damaged when heavy weight is used See the lengths and ends of the cables CABLE DIAGRAM on page 21 of this manual for proper cable routing If there is any slack in the cables you will need to remove it by tightening the cables See TROUBLE SHOOTING AND MAINTE IMPORTANT Whilst assembling the NANCE on page 20 cables do not overtighten the bolts and nuts securing the pulleys The pulleys must be able to turn freely 12 Locate the Long Cable 23 Route the Long Cable around the indicated 3 1 2 Pulley 15 attached to the Top Frame 55 Be sure that the end of the Cable with the ball is on the indicated side of the Pulley and that the Cable is between the Pulley and the hook Tighten the 3 8 x 3 3 4 Bolt 71 and the 3 8 Nylon Locknut not shown 13 Wrap the Long Cable 23 around a V Pulley 6 Attach the V Pulley and a Long Cable Trap 50 to the indicated bracket on the Front Upright 42 with a 3 8 x 2 1 2 Bolt 7 and a 3 8 Nylon Locknut 21 Be sure that the Long Cable Trap is positioned to hold the Cable in place CABLE ASSEMBLY
17. ll cables every two years FRAME ASSEMBLY following information and instructions Place all parts of the home gym system in a cleared area and remove the packing materials do not dispose of the packing materials until assembly is completed The assembly is divided into four stages 1 frame assembly 2 press and butterfly arm assembly 3 cable and pulley assembly and 4 seat and backrest assembly The hardware for each stage is packaged separately Wait until you begin each assembly stage to open that parts bag For help identifying the small parts used in assembly use the PART IDENTIFICATION CHART located in the centre of this manual Note Some small parts may have been pre attached for shipping If a part is not in the parts bag check to see if it has been pre attached 1 Before beginning assembly be sure that you have read and understand the infor mation in the box above Press a 2 Square Outer Cap 51 onto each end of the Stabiliser 5 Press a 2 Square Inner Cap 27 into the end of the Base 4 Insert two 5 16 x 2 3 4 Carriage Bolts 14 up through the Stabiliser 5 Insert two 5 16 x 2 1 2 Carriage Bolts 1 up through the Base 4 Slide the indicated end of the Base 4 onto the 5 16 x 2 3 4 Carriage Bolts 14 in the Stabiliser 5 Slide the Rear Upright 56 onto the Carriage Bolts Hand tighten a 5 16 Nylon Locknut
18. m system for protection Replace all cables every two years 18 2 1 4 x 3 4 Screw 60 1 5 16 x 6 Bolt 19 2 Weight Bumper 61 2 1 2 x 3 4 Spacer 5 Inspect and tighten all parts often Replace 12 Always disconnect the lat bar from the home 20 1 Pulley Bracket 62 2 Weight Guide any worn parts immediately gym system when performing an exercise 21 11 3 8 Nylon Locknut 63 1 Weight Tube that does not use the lat bar 22 4 5 16 x 2 1 2 Bolt 64 1 Weight Tube Bumper 6 Keep children under 12 and pets away from 23 1 Long Cable 65 1 1 Square Inner Cap the home gym system at all times 13 Always attach the lock pin and lock to the 24 1 1 4 x 2 Screw 66 2 Cable Trap weight guide when the home gym system is 25 6 Weight 67 1 Small U Bracket 7 Always wear athletic shoes for foot not in use see page 18 26 1 Weight Pin 68 1 5 16 x 5 Bolt protection 27 3 2 Square Inner Cap 69 4 1 Retainer 14 The home gym system is intended for home 28 2 12 1 2 Pad Tube 70 2 1 Round Cover Cap 8 Keep hands and feet away from moving parts use only Do not use the home gym system in 29 1 Leg Lever 71 4 3 8 x 3 3 4 Bolt any commercial rental or institutional setting 30 4 5 1 2 Pad 72 1 5 16 x 1 3 4 Bolt Pand rip a J a e Space A WARNING Before beginning this or any exercise program consult your physician This 32 2 1 1 2 Square Inner Cap 74 2 1 1 8 x 2 1 2 Plastic Bushing 5 2 33 1 5 16
19. s The actual resistance at each weight station may vary due to differences in individual weight plates as 3 Press a 2 Square Inner Cap 27 into each well as friction between the cables pulleys and weight guides end of the Top Frame 55 Press a 1 3 4 Square Inner Cap 44 into each end of the crossbar on the Top Frame Press two Round Inner Caps 82 into the top of the crossbar Attach the Top Frame 55 to the Front Upright 42 and the Rear Upright 56 with four 5 16 x 2 3 4 Bolts 11 four 5 16 Washers 8 and four 5 16 Nylon Locknuts 3 Tighten all Nylon Locknuts used in steps 1 through 3 4 Set two Weight Bumpers 19 onto the brack et on the Base 4 as shown Stack six Weights 25 on the Weight Bumpers 19 Be sure that all of the Weights are turned so the pin grooves are on the Groove same side Be careful not to tip the stack of Weights 4 Bracket ATTACHING AND REMOVING THE SEAT Set the bracket on the Seat Frame 36 onto the indi cated pins on the Front Upright 42 Attach the Seat Frame to the Front Upright with the 5 16 x 2 3 4 Carriage Bolt 14 and the Seat Knob 40 For some exercises the Seat 13 must be removed First be sure that the chain is not attached to the leg lever Next remove the Seat Knob 40 and the 5 16 x 2 3 4 Carriage Bolt 14 from the Seat Frame 36 Lift the Seat Frame
20. ted side Be sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly Note The 3 1 2 Pulley 15 in this drawing is pre assembled It is shown disassem bled for easy part identification Route the Long Cable 23 around the 3 1 2 Pulley 15 attached to the bracket on the Top Frame 55 Tighten the 3 8 x 2 Bolt 12 and the 3 8 Nylon Locknut 21 Be sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly 10 SEAT ASSEMBLY 29 30 Rest the Seat Frame 36 on the indicated pin in the Front Upright 42 Attach the Seat Frame to the Front Upright with a 5 16 x 2 3 4 Carriage Bolt 14 and the Seat Knob 40 Press 3 4 Round Inner Caps 34 into the ends of both 12 1 2 Pad Tubes 28 Insert one 12 1 2 Pad Tube 28 into the Seat Frame 36 Slide a 5 1 2 Pad 30 onto each end of the Pad Tube Insert the other 12 1 2 Pad Tube 28 into the Leg Lever 29 Slide a 5 1 2 Pad 30 onto each end of the Pad Tube 15 SEAT ASSEMBLY 26 27 28 Attach the Backrest 41 to the Front Upright 42 with two 1 4 x 2 1 2 Screws 43 and two 1 4 Washers 10 Press a 1 1 2 Square Inner Cap 32 into the Seat Frame 36 Insert the 1 4 x 2 C
21. ww iconeurope com TABLE OF CONTENTS IMPORTANT PRECAUTIONS ooo 3 BEFORE YOU BEGIN 3 0000 a Pitta a a ees BE da Sie 4 ASSEMBEY Sak he ee gh Ea be al So ell Sia 5 ADJUSTMENT actas keto ee toi pane fhe o oe ee a ete Ged brates Out ia 17 TROUBLESHOOTING AND MAINTENANCE 20 CABLE DIAGRAM sires Bec settle AE lg 21 PART EIST Sl are trate 22 EXPLODED DRAWING gots A 61 9 92 8 99 eae i 23 ORDERING REPLACEMENT PARTS 66 6 6 6 Back Cover Note A PART IDENTIFICATION CHART is attached to the centre of this manual Remove the PART IDENTIFICATION CHART before beginning assembly WEIDER is a registered trademark of ICON Health amp Fitness Inc 2 EXPLODED DRAWING Model No WEEVSY87111 RO902A ied PART LIST Model No WEEVSY87111 RO902A IMPORTANT PRECAUTIONS Deere ee Sud A nda WARNING To reduce the risk of serious injury read the following important precau 1 2 5 16 x 2 1 2 Carriage Bolt 43 2 1 4 x 2 1 2 Screw tions before using the home gym system 2 3 1 4 Nylon Locknut 44 6 1 3 4 Square Inner Cap 3 16 5 16 Nylon Locknut 45
22. x 7 8 Plastic Bushing 75 onto each welded spacer on the Press Frame 17 Slide the Press Frame into place on the Base 4 Note This will be a tight fit The Plastic Bushings should fit onto each end of the indicated tube in the Base Be sure that the pulleys are on the indicated side Lubricate the 3 8 x 8 Bolt 59 Attach the Press Frame 17 to the Base 4 with the 3 8 x 8 Bolt and a 3 8 Nylon Locknut 21 Lubricate Spacers ARM ASSEMBLY 10 Press a 1 3 4 Square Inner Cap 44 into the top of a Press Arm 46 Press a 1 Round Inner Cap 49 into each end of the handle on the Press Arm Attach the Press Arm to one side of the Press Frame 17 with two 5 16 x 2 1 2 Bolts 22 and two 5 16 Nylon Locknuts 3 Assemble the other Press Arm 46 in the same manner Identify the Right Arm 48 and the Left Arm 47 Note the position of the welded bracket on each Arm Arm identification is very important for step 10 Note The V Pulleys 6 Long Cable Traps 50 3 8 x 2 1 2 Bolts 7 and 3 8 Nylon Locknuts 21 are pre attached These have been shown disassembled for easy part iden tification Lubricate both axles on the Top Frame 55 Slide the Right Arm 48 onto the right axle Note Be careful not to confuse the Right Arm with the Left Arm 47 refer to step 9 to identify the Right Arm Be sure that the upper end of the
Download Pdf Manuals
Related Search