Bullard T3 Thermal Imager User Manual
Contents
1. CD and delivery case T3TRANS Four channel wireless remote transmitter housed in quick attach handle antenna receiver cable 110 VAC USA only and 12 VDC adapters T3TRANS2 Two channel wireless remote transmitter housed in quick attach handle antenna receiver cable 110 VAC USA only and 12 VDC adapters T3TRANSCOM Four channel wireless remote transmitter housed in quick attach handle with NTSC format TV VCR internally mounted receiver 110 VAC USA only and 12 VDC adapters antenna and all necessary cables T3TRANSCOM2 Two channel wireless remote transmitter housed in quick attach handle with NTSC format TV VCR internally mounted receiver 110 VAC USA only and 12 VDC adapters antenna and all necessary cables T3TRANSONLY Four channel wireless remote transmitter housed in quick attach handle receiving system not included T3TRANSONLY2 Two channel wireless remote transmitter housed in quick attach handle receiving system not included T3COM Combination NTSC format TV VCR with built in four channel receiver for simpler operation package includes TV VCR 110 VAC USA only and 12 VDC built in receiver antenna and all necessary cables Bullard 1898 Safety Way Cynthiana KY 41031 9303 Toll free 877 BULLARD 285 5273 Tel 859 234 6616 Fax 859 234 8987 www bullard com www thermalimager com Germany Bullard GmbH Hochkreuzallee 36 53175 Bonn Bad Godesberg Tel 49 228 931933 02. Fax 49 228 931933 50 www bullardextrem com Head Protection Thermal Imaging Fire and Rescue Safety Respiratory Protection l Article must be returned to Bullard with shipping charges prepaid 2 Article must not be altered from its original configuration 3 Article must not have been misused abused or damaged in transport 4 When the outer shell is obsolete and Bullard no longer stocks the part the limited lifetime warranty will be terminated In no event shall Bullard be responsible for damages loss of use or other indirect incidental consequential or special costs expenses or damages incurred by the purchaser notwithstanding that Bullard has been advised of the possibility of such damages Any implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to one 1 year from the date of manufacture of this product six 6 months for the Bullard T3L Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may have other rights which vary from state to state Extended Warranty The extended warranty has all the same terms and conditions as the one year warranty except it is for a period totaling two years standard one year warranty plus o
3. least 200 F 93 C iS NOTE You will periodically observe a momentary freeze in the image This is normal and is a function of the self calibration shutter The shutter will activate every 30 seconds to three minutes depending on the environment The shutter will also activate each time the T3 goes into and out of EI Mode Relative Heat Indicator RHI T3LT and T3MAX Models Only T3LT and T3MAX models are equipped with temperature measurement capability The right side of the display will show a bar graph or Relative Heat Indicator RHI The RHI will indicate the approximate temperature of the object viewed within the crosshairs shown in the middle of the screen The accuracy of the indicators is dependent on numerous factors including the distance from the object being viewed and its emissivity which is the object s ability to radiate heat Units are calibrated with a preset emissivity corresponding with normal construction materials Objects with emissivities that vary greatly from this such as metals and shiny objects will reduce the accuracy of the temperature indication Additionally temperature measurement accuracy decreases as the distance from the object in the crosshairs increases L NOTE The RHI provides a quick reference to compare objects of similar emissivities to serve as a guide to pinpoint intense heat sources Due to the inherent problems with accuracy use this feature with caution and ve
4. Bullar d Bullard T3 Thermal Imager It s your life and you re worth it User Manual Congratulations Congratulations on the purchase of your new Bullard T3 L LT or MAX Thermal Imager The Bullard T3 combines advanced thermal imaging technology with our expertise in high heat impact resistant engineered polymers to bring you the most durable thermal imager on the market The T3 s innovative compact design and logical easy to use interface presents a truly personalized thermal imaging tool to today s firefighters The benefits of using thermal imaging technology as a firefighting tool encompass nearly every aspect of a firefighter s job Thermal imaging is not however a technology designed to replace current firefighting tactics Rather it is a tool that allows the firefighter to be more effective and make better decisions Some of the many uses for your Bullard T3 Thermal Imager include T3LT e Search and rescue e Size Up e Fire Attack e Overhaul e Hazmat e Wildland firefighting e Training e EMS NOTE To help us better serve you please fill out the warranty card enclosed with your Bullard T3 Thermal Imager This will allow us to send you updated versions of important support information and materials A WARNING Read all instructions and warnings before using this product Failure to follow this information could result in death or serious injury Your thermal imager is like any other tool
5. ble For your convenience your representative will try to help you correct the problem over the phone Before returning your Bullard T3 Thermal Imager you should Figure 7 l Verify with your representative that the product should be returned to Bullard The Bullard Technical Support Service Center will provide you with written permission and a return authorization number 2 Decontaminate and clean your Thermal Imager to remove any hazardous or contaminated materials that may have settled on the product during use Laws and or shipping regulations prohibit the shipment of hazardous or contaminated materials Products suspected of contamination will be professionally decontaminated at the customer s expense 3 Ship returned products including those under warranty with all transportation charges pre paid Bullard cannot accept returned goods on a freight collect basis Returned products will be inspected upon return to the Bullard facility If the repair is under warranty Bullard will repair the unit and ship it from our factory within 48 business hours If the return is a non warranty repair a Bullard Technical Support Representative or your local distributor will contact you with notification that an estimate has been prepared Your local distributor will provide you with a repair invoice estimate To authorize repair you must provide a purchase order to your distributor for the amount of the estimate Once Bullard receives aut
6. chnology designed to replace current fire fighting tactics Rather it is a tool that allows the firefighter to be more effective and to make better decisions Failure to observe these warnings could result in death or serious Injury CAUTION Always monitor LED levels as average run times will vary depending on environmental conditions battery condition and whether a transmitter Is in use A 15V 2A AC Adapter is supplied with the unit for powering the battery charger When using AC power do not substitute an adapter with a different specification Failure to observe this instruction may result in equipment and or property damage Strap Assemblies Side Straps The side straps are designed to be field replaceable Users can order replacements and install them without having to return the thermal imager to the factory Removing Installing the Side Straps Strap Loop To remove either of the right or left side straps loosen the strap and pull it through the strap loop located on either side of the LCD display Figure 5 Remove the screw that holds the strap to the imager To install fasten the strap to the unit using the screw provided Do not overtighten Feed the strap through the strap loop and adjust to the desired length Adjusting the Side Straps To adjust a side strap loosen the hook and loop and set to the desired length Combination Strap The combination strap Figure 6 can be used either as a wrist strap to keep t
7. he imager from falling if it should slip from your hand or as a gear strap hooked directly onto your turnout gear or SCBA As a wrist strap the adjustable strap fits over the sleeve of your turnout gear and can adjust to any size wrist The strap can be easily attached to either D ring located on the thermal imager As a gear strap the strap can be attached to a D ring on your turnout gear or SCBA and to a D ring on the thermal imager A quick release buckle serves as a safety release mechanism in case the thermal imager ever becomes lodged inhibiting movement Simply depress the buckle and the thermal imager releases from the strap CEE TI eam Figure 6 Care Instructions The Bullard T3 Thermal Imager requires little maintenance For best results after each use e Clean the outside of the unit with mild soap or detergent e Wipe the lens with a soft cloth e Clean the display with a soft cloth e Check screw tightness on side straps and cover display e Store your Bullard T3 in the optional truck mount or in the delivery case provided CAUTION Do not use solvents or paint thinners to clean your Bullard T3 Thermal Imager as they could permanently mar the surface or degrade the properties of the outer Shell Failure to observe this instruction may result in equipment damage Care should be taken to ensure that the unit is not damaged in any way including loose or missing gaskets cracks in the housing or loose or missing sc
8. horization from your local distributor Bullard will repair the unit and ship it from our factory within 48 business hours If the cost of repairs exceeds the stated quote by more than 15 or by more than 100 a Bullard representative will reestimate your repair and your local distributor will contact you for authorization to complete repairs After repairs are completed and the goods have been returned to you your distributor will invoice you for the actual repair amount LS NOTE Do not attempt to disassemble the sealed case of your Bullard T3 Thermal Imager If the unit is not functioning properly return it to Bullard as described in the Service section for evaluation Disassembling the unit voids all warranties Bullard It s your life and you re worth it Warranty Bullard warrants to the original purchaser that the Bullard T3 LT and MAX and all features accessories installed in the unit are free of defects in materials and workmanship under intended use and service for a period of one 1 year from date of manufacture The Bullard T3L is warranted for six 6 months Bullard s obligation under this warranty is limited to repairing or replacing at Bullard s option articles that are returned within the warranty period and that after examination are shown to Bullard s satisfaction to be defective subject to the following limitations a Article must be returned to Bullard with shipping charges prepaid b Article mu
9. it must be used properly and safely All users should be trained on the proper and safe use of thermal imaging prior to using the T3 This is especially important for users who may use the T3 in hazardous or IDLH immediately dangerous to life and health environments Bullard T3 Series Rear Boot Polycarbonate Display Cover Za Lens Bezel kae if LCD Screen Os Lens Power Button J Battery Side Strap Figure 1 T3MAX shown Bullard It s your life and you re worth it Battery Locking Buttons Use and Operation Power To turn on your Bullard T3 Thermal Imager simply depress and release the large dark gray power button under the LCD display Figure 2 Upon pressing the power button the thermal imager will display the Bullard logo and initiate a calibration sequence The thermal image will appear in approximately 5 seconds approximately 8 seconds for the T3MAX To turn off power depress and release the power button again EI Electronic Integration Mode The Bullard T3 is equipped with an automatic gain control AGC that manages the sensitivity of the unit ensuring optimal image resolution in intense energy situations When the AGC engages to accommodate high heat scenes the letters EI appear on the screen indicating that the unit has shifted into Electronic Integration or EI mode This is an indication that the T3 has scanned an object that it has calculated to be at
10. ne additional year This warranty can be purchased through any authorized Bullard distributor CATALOG NUMBER DESCRIPTION T3COM2 Combination NTSC format TV VCR with built in two channel receiver for simpler operation package includes TV VCR 110 VAC USA only and 12 VDC built in receiver antenna and all necessary cables T3REC Four channel receiver system includes the antenna receiver and all associated cabling necessary for receiving transmitted video signal T3REC2 Two channel receiver system includes the antenna receiver and all associated cabling necessary for receiving transmitted video signal T3NIMH 10 V NiMH rechargeable battery T3ALK AA Alkaline Battery Case T3 COMBOSTRAP Combination wrist and gear strap T3STRAPKIT T3 replacement strap kit includes left and right side straps T3 WINDOW Replacement hard coated polycarbonate display cover T3 CHARGER Charger for NiMH rechargeable batteries T3 POWERHOUSE Truck mounted Direct Charge System this system includes vehicle mount built in battery charger direct wiring kit and attachment hardware T3POWERHOUSEKIT Kit for Powerhouse truck charger that enables free standing use with either AC or DC power supplies T3HANDLE Quick attach handle T3CASE Heavy duty hard case to house the Bullard T3 and components T3 RETRACT Retractable strap kit that keeps the T3 convenient yet out of the way T3PM Preventative maintenance factory service package to keep your T3 performing and lo
11. oking like new T3PMKIT Field Service kit for wear and tear items for your T3 in a convenient bundled package includes display cover window side straps and one battery T3EXT Original limited warranty extended one full year 2003 Bullard All rights reserved Bullard is a registered trademark of Bullard It s your life and you re worth it Red Hot Relative Heat Indicator T3 T3L T3LT and T3MAX are trademarks of Bullard ISO 9001 certified 6050047118 0703
12. rews If any damage to non field replaceable items is apparent follow the procedures outlined in the service section of this manual and return the unit immediately to Bullard for service Continued use of a damaged unit may void the warranty The Bullard T3 has a high tolerance for very cold temperatures However the unit should not be stored in sub freezing environments Failure to observe this instruction may result in temporary equipment malfunction until the unit warms to a normal operating temperature Bullard T3 Thermal Imager User Manual Cleaning the Lens The Bullard T3 lens is recessed in an impact resistant bezel The lens can be cleaned with a soft cloth and soapy water as required Replacing the Video Display Cover Window The display cover Figure 7 has a scratch resistant hard coating to minimize marring However if heavy scratching or gouging does occur the cover window can be replaced To do this simply remove the four screws along the top and bottom of the window Remove the plastic display cover window and replace with a new one part number T3WINDOW making sure that the countersink slots around the mounting holes are facing outward Do not overtighten Service If your Bullard Thermal Imager is not performing properly please contact Bullard Technical Support at 877 BULLARD 285 5273 Outside the US amp Canada call 1 859 234 6611 Describe the problem to the Bullard representative as completely as possi
13. rify indicated heat levels through traditional means whenever possible Red Hot Feature T3MAX Model Only The T3MAX features Red Hot high heat colorization When viewing a scene of intense heat extremely hot objects will appear as red on the screen Those objects that the T3MAX calculates to be approximately 1100 F 593 C or hotter will be colored red The Red Hot feature provides an enhanced visual awareness of the hottest objects in a scene NOTE The Red Hot feature T3MAX Model Only will only activate when the unit is in EI mode Using the Battery Charger The battery should be charged in the battery charger using either the AC or DC adapter provided Figure 3 To charge the battery simply insert the battery into the charger so that the metal connectors on the battery are aligned with the metal connectors in the charger A red light will illuminate on the charger to indicate that the battery is charging When the light on the charger turns to green your battery is fully charged You may leave the battery in the charger indefinitely as the battery will not overcharge For maximum battery life and performance you should remove the battery from the charger and discharge it completely on a monthly basis Loading Unloading the Battery Loading and unloading the battery on the Bullard T3 is easy Figure 4 To install a battery slide the battery into the groove on the bottom of the unit and ensure that the battery is properl
14. st not be altered from its original configuration c Article must not have been misused abused or damaged in transport d Maintenance and field replaceable items if defective are covered under warranty for a ninety 90 day period These items include e Batteries e Straps e Battery chargers e Display covers e AC DC adapters e All accessories except transmitter Bullard provides a limited lifetime warranty on the T3 outer shell This warrants that the outer shell is free of defects in materials and workmanship under intended use and service for the original purchaser Bullard s obligation under this warranty Is limited to repairing or replacing at Bullard s option articles that after examination are shown to Bullard s satisfaction to be defective subject to the following limitations Ordering Information CATALOG NUMBER T3L DESCRIPTION Bullard T3L Thermal Imager includes Bullard Thermal Imager one 10 V NiMH rechargeable battery 10 V charger with 110 VAC USA only and 12 VDC adapters T3LT Bullard T3LT Thermal Imager includes Bullard Thermal Imager two 10 V NIMH rechargeable batteries 10 V charger with 110 VAC USA only and 12 VDC adapters combination strap multimedia orientation CD and delivery case T3MAX Bullard T3MAX Thermal Imager includes Bullard Thermal Imager two 10 V NiMH rechargeable batteries 10 V charger with 110 VAC USA only and 12 VDC adapters combination strap multimedia orientation
15. y seated To remove a battery depress both battery locking buttons simultaneously and slide the battery out of the unit Since it can only be loaded one way the battery is easily replaced in the dark Additionally as with all batteries your Bullard rechargeable battery will experience a slow drain of its charge during storage The amount of drain varies widely based on storage conditions For best performance charge each of your batteries every week IEY NOTE Fully charged NiMH batteries will provide a run time of 21 2 hours This run time will be less in extreme heat or extreme cold conditions and or if the transmitter is in use Bullard provides an optional AA Alkaline battery case which can be used as an alternative to the standard 10 V NiMH rechargeable batteries The AA alkaline battery case requires eight AA alkaline batteries Once the batteries are installed the case loads into the unit in the Same manner as the standard NiMH battery Due to the unique way that alkaline batteries disperse power to the unit the LED indicators will report battery levels that are not necessarily indicative of the battery s actual remaining charge Fully charged AA Alkaline batteries will typically operate a Bullard T3 for 2 hours Do not insert the AA Alkaline battery case into any Bullard T3 battery chargers including the Powerhouse A WARNING The Bullard T3 Thermal Imager is not certified as intrinsically safe Thermal Imaging is not a te
Download Pdf Manuals
Related Search