"user manual"
Contents
1. 4 Cycle cameras 5 Settings ACTIVATION I 3 4 5 HOUSE AUTOMATION Main menu example with communication and house automation submenu 1 2 3 1 Communication 2 Scenarios 3 Alarms 4 Sound system 5 Temperature control SCE pet 6 Settings CUSTOMISED MENU The customised menu allows more intuitive use of the Video Display functions In fact the menu only displays the functions in your My Home system and the text of each command can be customised in the installation phase Using the customised menu also lets you e Have the PROFESSIONAL STUDIO HANDS FREE PAGING and MULTIMEDIA functions which otherwise can only be called from the SETTINGS menu in the main page or in another page 1 2 3 1 Communication 2 Professional studio 3 Hands free 4 Paging 5 Multimedia NGS 6 Settings 4 5 6 Introduction and basic functions 1 The installer has given the exact configuration of your Video Display the tables below if he has not filled it in ask for it COMMUNICATION FUNCTIONS DESCRIPTION HOUSE AUTOMATION SUB MENU SYSTEM FOUND SCENARIOS O ALARMS C SOUND SYSTEM O TEMPERATURE CONTROL O MULTIMEDIA INTERFACE O 7 Introduction and basic functions Y Volume adjustment NOTE During a video door entry call you can access the Adjustments menu directly by pressing the or key Select Adjustments Pres2. Burglar alarm SETTINGS 29 House automation functions 4 S To navigate the menu of the multimedia OK C interface use the same keys as its remote control Dn The MENU key of the multimedia interface can be activated by pressing and holding down C on the Video Display SI Inside the menu of the multimedia interface the videostation will not switch off automatically To exit and switch the monitor off press the pushbutton lt gt blema Notes B Services The Settings menu Services Professional studio Hands free Door state Alarm messages Messages 31 5 Services E The Settings menu The main menu always has the SETTINGS icon Selecting it gives access to a wide range of customisations which let you get the most from your Video Display Inside the Main menu select Settings Press OK to access the menu SETTINGS The following page is displayed with the icons 1 2 3 Adjustments see chapter 1 Services Messages 4 Bells 5 Information 6 Configuration 32 P3 SETTINGS um ADJUSTMENT SERVICES Fr INFORMATION Th CONFIGURATION VOLUME MONITOR SWING PROF STUDIO HANDS FREE DOOR STATE ALARM MSG CAUTION Only the installer has access to the CONFIGURATION menu incorrect operations could affect the operation of the Video Display Y Professional studio The Professional Studio function lets you set the automatic opening of
3. 5 C keys Set the heat protection 27 4 House automation functions 1 TEMP CONTROL UNIT 2 20 5 C 3 4 Press the and keys to select Temperature control unit Zones To set the manual mode and adjust the temperature use the and keys and then press OK to confirm To set the Weekly mode press OK to confirm the last weekly program selected on the Temperature control unit is set Press the key to set the protection antifreeze for winter or heat protection for summer Pressing the key switches the system OFF 28 You can set the temperature on different levels in the various system zones 1 ZONES 01 2 3 4 22 5 2 5 18 5 C Press the and keys to select Temperature control unit Zones To set the manual mode and adjust the temperature use the and keys and then press OK to confirm To set the Automatic mode press OK to confirm in this case resets the mode set on the Temperature control unit for this zone Press the key to set the protection antifreeze for winter or heat protection for summer Pressing the key switches the zone OFF Display the zone s current state If your system has the Multimedia Interface item 3465 you can access your menu via the dedicated icon Inside the Main menu select Multimedia Press OK to access the menu MULTIMEDIA INTERFACE MY HOME The display of your Video Display displays the main window of the Multimedia Interface
4. 11 09 01 PC gt lt User manual Video Display 349311 349312 1 Introduction and basic functions M General information m Your Video Display use it now v Video door entry function keys v Navigation keys m Menu functions Volume adjustment Monitor adjustment Camera swing Bells adjustment Paging S V Y V Y 2 Trouble shooting v Push to Talk mode 3 CCTV functions Activation Intercommunication Camera Cycle cameras Staircase lights i mM m Call exclusion 15 19 20 20 21 21 22 22 4 House automation functions E Scenarios m Alarms E Sound system m Temperature control m Multimedia menu 5 Services m The Settings menu E Services v Professional studio v Hands free v Door state v Alarm messages m Messages Contents 23 24 25 26 27 29 31 32 33 35 blema Notes 1 Introduction and basic functions General information Your Video Display use it now Video door entry function keys Navigation keys Menu function Volume adjustment Monitor adjustment Camera swing Bam Bells adjustment Paging 7 Introduction and basic functions E General information Em Your Video Display use it now The Video Display offers the normal video door entry and CCTV functions and can also interact with your My home system Fitting in with My Home Ib e Scenarios Runs the scenarios saved in the Scenario module Alarms Sig
5. ION I Y Press OK to confirm Command Performed appears on the screen briefly COMMAND PERFORMED To quit the menu press the C key 20 E Intercommunication This function allows conversation with other video handsets handsets installed in your home or in other apartments Press OK to access the Main menu Select the extension to call INTERCOMMUNICATING Press OK to confirm Command Performed appears briefly and then the screen switches off If the audio video channel is occupied by another user you hear a sound and the command is not performed Wait until the channel is free and COMMAND PERFORMED try again If there is a call from the entrance panel the conversation is interrupted CCTV functions 3 MH Camera This function lets you monitor your home activating one of the cameras in the apartment and in the common areas e g garage or garden CAMERA I O OK Press OK to access the Main menu Select the camera AM v O O to activate Press OK O OK to confirm The picture taken by the camera selected appears on the screen if the audio video channel is occupied by another user the command is not performed Wait until the channel is free and try again Ifthere isa call from the entrance panel the connection will be interrupted E Cycle cameras This lets you display the pictures taken by all the cameras installed one after the other Once activated the Video Display displays the
6. first camera for 10 seconds then goes to the next When the cycle is complete the screen switches off You can stop on the display of one camera by pressing the Connection key The working camera remains active and if it belongs to an entrance panel the sound communication is activated as well 00 O ok CYCLE CAMERAS Select Cycle cameras Press OK to Confirm if the audio video channel is occupied by another user the command is not performed Wait until the channel is free and try again If there is a call from the entrance panel the connection will be interrupted 3 CCTV functions E Staircase lights Lets you switch on the lights at the entrance or on the stairs Press OK to access the Main menu Select the Staircase light function STAIRCASE LIGHTS Press OK to confirm Command Performed appears on COMMAND PERFORMED the screen briefly then the Main menu returns 22 E Call exclusion This lets you enable disable the call bell If the bell is disabled the call exclusion LED lights up Led To activate the call exclusion set the Bell volume to zero see Volume Adjust ments chapter page 10 4 House automation functions Scenarios Alarms Sound system Temperature control Multimedia menu 23 4 House automation functions mM Scenarios Your Video Display communicates with the BTicino automation system The installer has given a brief description of the scenar
7. iated Entrance Panel The LED signals that it is activated Connection key Activates deactivates the audio connection When a call has been received the LED flashes press once to answer the LED shines steadily At rest activates the paging function if enabled Introduction and basic functions Y Navigation keys O ok 00 O O cO OK key Allows access to the menu confirms the selection made AY keys Inside the menu they select the previous or next item P keys Inside the menu they change the value set In audio video connection they allow rapid access to the volume and monitor settings C keys Returns to the previous window If you are already on the first window it switches the display off 1 Introduction and basic functions E Menu functions Use the OK key to access the main menu 1 1 1 SET NGS 1 1 2 Use the N V keys to select the functions from those available 1 Submenu and commands 2 Use the settings icon to access a series of adjustments services described below Three possible solutions for drawing up the main menu are given below menu with COMMUNICATION functions e menu with HOME AUTOMATION functions e CUSTOMISED menu For more explanations consult the complete User Manual in the CD supplied 8 COMMUNICATION Main menu example with programming of just the COMMUNICATION commands 1 2 3 1 Activation 2 Intercommunication 3 Camera
8. inutes and try again check that the call has not been excluded the call exclusion LED is ON check the configuration of the devices talk at a maximum distance of 40 centimetres from the Video Display microphone check the entrance panel settings with the installer and if necessary reduce the microphone volume you can communicate in PUSH TO TALK mode see description on next page check the volume setting on the Video Display make sure that there are no strong noise sources near the Video Display you can communicate in PUSH TO TALK mode see description on next page btcmo Trouble shooting 2 Y Push to Talk mode Receiving a call from the entrance panel Press the Connection key to answer the call The connection LED lights up During the conversation you can activate the PUSH TO TALK function Press the Connection key for at least 2 seconds to talk to the entrance panel The LED remains ON 2 Trouble shooting Release the key to hear from the entrance panel The LED becomes red To end the connection press the connection key briefly The LED goes out 18 3 CCTV functions Activation Intercommunication Camera Cycle cameras Staircase lights Call exclusion 3 CCTV functions E Activation This function activates an actuator or an entrance panel As an example you can activate the opening of a secondary gate Press OK to access the Main menu Select the function ACTIVAT
9. ios set in the activating the scenarios tables below if he has not filled it in ask for it SCENARIO DESCRIPTION MA Y Inside the Main menu SCENARIO O O select Scenarios SCENARIO II O pa Press OK SCENARIO III to confirm SCENARIO IV SCENARIOS SCENARIO V v NA NV Select the scenario O O you want to activate O OK Press OK to confirm SCENARIO Command Performed appears on the screen briefly To quit the menu press the C key 24 btemo House automation functions 4 E Alarms Your Video Display communicates with the BTicino burglar alarm Alarms icons key system in particular giving information on the system state the active zones and the last 3 alarms given a ARMED ANTIPANIC Inside th Main menu a DISARMED DA TECHNICAL select Alarms Press OK INTRUSION TAMPERING to confirm ALARMS KI FREEZER A FIRE EMERGENCY The information screen appears En TELERESCUE E FLOOD 25 4 House automation functions E Sound system The information in the screen is read as indicated below If your Video Display is connected to the BTicino sound system you can check it Inside the Main menu NN O O select Sound system O OK Press OK to access the menu SOUND SYSTEM v 1 State of the 8 zones managed by the burglar alarm system the corresponding number from 1 to 8 is indicated for each active zone 2 System state ON OFF 3 Information on the last 3 alar
10. key is pressed NV Select OO Services O OK Press OK to confirm Av Select QO Services O OK Press OK to confirm SERVICES SERVICES Y v Select Alarm MSG Select Door state Enable or disable the function Enable or disable the function DOOR STATE ALARM MSG m Messages Select Messages Press OK to confirm MESSAGES Select the message Message from you want to display switchboard Press C to return to C O the previous page There are messages the menu can be selected No messages the menu cannot be selected 35 Services 5 ajedjunwwo 0 PUR 13004 S14 JO SJUDJUO
11. ms SOUND SYSTEM a the sound Type of alarm Zone or Channel of origin system adjust the O O volume select the CD track or change the radio station and Using the keys you can activate de Technical Alarms GAS LEAK C 1 TECHNICAL GENERIC C 5 6 7 rese annen FREEZER C 2 FIRE C 8 cource FLOOD C 3 TELERESCUE C 9 EMERGENCY CALL C 4 NOTE when the burglar alarm is switched on the memory of the One channel system general activation of the single room and of the single amplifier if bl I a a a Le r the Video Display is programmed by PC last 3 alarms is cancelled if the siren is active a further alarm can t be Multi channel system activation of the single room and of the single amplifier if the visualized Video Display is programmed by PC 26 bhicine House automation functions 4 E Temperature control Your Video Display lets you control and adjust the temperature inside the home interacting with the BTicino temperature control system 1 SOUND SYSTEM 2 3 Inside the Main menu select Temperature 4 5 control system Press OK to confirm 1 Press the and keys to select amplifier PEO NE Ol 2 Press the and ON OFF the system 3 Press the and adjust the volume 4 Press the key to select the music source radio CD etc 5 Press the and keys to change the radio station or choose the CD track TEMP CONTROL UNIT You can set the manual mode and adjust the temperature with the 20
12. nals the last alarm events which have occurred and the division of the system e Sound system 6 Manages the BTicino digital sound system Temperature control Displays and adjusts the temperature in the various zones of the home and the state of the control unit LCD screen note 2 The LCD screen has been manufactured using advanced high precision technology It is however possible that sometimes up to 5 small black or coloured dots red blue green may appear on the LCD screen This is an absolutely normal result of the manufactur ing process and is not indicative of a malfunction and or fault 1 Entrance panel and cycling 5 Navigation keys switching ON key 6 Microphone MN WARNINGS 2 Door lock key 7 LCD 2 5 colour display 3 Connection key 8 Loudspeaker E Incorrect use of the Video Display and of all the devices 4 Call exclusion LED connected to it excludes any guarantee E For cleaning only use a damp or antistatic cloth Avoid the use of alcohol or chemical detergents It lights up when the bell volume is set to 0 Y Video door entry function keys Activation Entrance Panel Cycling Itactivates the switching on ofthe associated Entrance Panel and if present allows the cycling display ofthe other Entrance Panels cameras Door lock key When there is a call it opens the door lock of the Entrance Panel from which the call was made at rest that of the assoc
13. s OK to access the menu ADJUSTMENTS O OK Press OK to confirm VOLUME 10 Inside the menu select one of the items HIHI e g Bells Adjust the volume to the level required O O lt EP SOUND sound volume when talking to the entrance panel INTERCOM sound volume when holding an intercom conversation BELLS volume level for all the bells SOUND SYSTEM sound system volume btemoao Introduction and basic functions 1 Y Monitor adjustment NOTE During a video door entry call you can access the Adjustments menu directly by pressing the or key Select Adjustmen F djustments Inside the menu select NNW OO one of the items e g Contrast Press OK to access the menu ADJUSTMENTS COLOUR Select lill Monitor Make O O the adjustment Press OK to confirm MONITOR CONTRAST 7 Introduction and basic functions Y Camera swing NOTE This menu can only be accessed during the connection with the entrance panel if this is set up for the camera swing Select Adjustments camera angle NM O O Adjust the correct 00 Press OK to access the menu Select Swing Press OK to confirm SWING BRACKET 12 Y Bells adjustment You can associate one of sixteen tunes to each call event Select Bells Press OK to access the menu Select the event Press OK to confirm CALL FROM EP S 0 13 Introduction and basic functions 7 v Selec
14. t Confirm and then OK to save the selection and return to the previous page UB CALL FROM EP call from the entrance panel S 0 o S 1 INTERNAL INTERCOM call from the intercom in your apartment EXTERNAL INTERCOM call from an intercom in another apartment CALL TO THE FLOOR call from the pushbutton near your entrance door 7 Introduction and basic functions Y Paging If your system is set up using the icon in the main menu a paging call can be sent to the system e Basic only sound system e Enhanced on the speaker audio handsets as well Select NM OO Paging O OK Press OK to confirm Once the communication is activated the voice will be played on the whole system n The page function can be activated directly by pressing the key lt gt if the installer has configured it Configurate with Software 14 2 Trouble shooting Push to Talk mode bili 2 Trouble shooting PROBLEM On pressing the Entrance panel Activation Cycling key O no picture appears On pressing the OK key the menu does not switch on and the handset gives a busy sound When called the handset does not ring At the entrance panel it is difficult to hear the caller At the handset it is difficult to hear the caller 16 SOLUTION the audio video channel may be busy wait for it to become free from 1 to 3 minutes and try again the audio video channel is busy wait for it to become free from 1 to 3 m
15. the door lock when there is a call from the Entrance Panel It cannot be activated at the same time as the Door State function Av Select O O Services O OK Press OK to confirm SERVICES v 2 Enable or disable O O the function If you enable this function your Video Display door lock LED flashes to remind you PROF STUDIO Services 5 The Hands Free function automatically activates the microphone and loudspeaker when there is a call avoiding having to press the Connection key to answer the connection is established immediately the call is made Select Settings Press OK to confirm SERVICES Enable or disable O O the function If you enable this function your Video Display door lock LED flashes to remind you 5 Services Y Door state Y Alarm messages This function tells you about the door lock state If it is open the door Ifitis activated the Video Display tells you if the antiintrusion system has lock LED flashes if it is closed it remains OFF detected an alarm The three LED flash alternately until a key is pressed NOTE it can only be activated if your system allows it ask your installer to display the message if locally supplied the message will be displayed for more information it can not be activated at the same time as the automatically Professional Studio function To cancel the message press the C key when the message is displayed If not the signal will appear the next time a
Download Pdf Manuals
Related Search