Mouse IL-11 ELISA Kit User Manual Catalog
Contents
1. 5 Wash plate 3 times with Wash Buffer Working Solution and each time let Wash Buffer Working Solution stay in the wells for 1 2 minutes Discard the Wash Buffer Working Solution and blot the plate onto paper towels or other absorbent material 6 Add 100 ul of Streptavidin HRP Working Solution into each well and incubate the plate at 37 C for 45 minutes 7 Wash plate 5 times with Wash Buffer Working Solution and each time let wash buffer stay in the wells for 1 2 minutes Discard the wash buffer and blot the plate onto paper towels or other absorbent material 8 Add 100 ul of TMB Substrate Solution into each well and incubate plate at 37 C in dark for 30 minutes 9 Add 100 ul of Stop Solution into each well The color changes into yellow immediately FOR RESEARCH USE ONLY NOT FOR OR THERAPEUTIC PROCEDURES 10 Read the O D absorbance at 450nm in a microplate reader within 30 minutes after adding the Stop Solution For calculation the relative O D 450 the O D 450 of each well the O D 450 of Zero well The standard curve can be plotted as the relative O D 450 of each standard solution Y vs the respective concentration of the standard solution X The concentration of the samples can be interpolated from the standard curve Note If the samples measured were diluted multiply the dilution factor to the concentrations from interpolation to obtain the concentration before dilution FOR RESEARCH USE ONLY N2. OR THERAPEUTIC PROCEDURES I INTRODUCTION Interleukin 11 IL 11 is a protein that in humans is encoded by the IL11 gene The protein encoded by this gene is a member of the gp130 family of cytokines This gene is mapped to 19413 42 It is a key regulator of multiple events in hematopoiesis most notably the stimulation of megakaryocyte maturation IL 11 has been demonstrated to improve platelet recovery after chemotherapy induced thrombocytopenia induce acute phase proteins modulate antigen antibody responses participate in the regulation of bone cell proliferation and differentiation and could be use as a therapeutic for osteoporosis What s more 1L 11 can stimulate the growth of certain lymphocytes and it has functions in many other tissues including the brain gut testis and bone In transgenic mice overexpression of the human IL11 gene resulted in the stimulation of bone formation to increase cortical thickness and strength of long bones FOR RESEARCH USE ONLY NOT FOR USE I NOSTIC OR THERAPEUTIC PROCEDURES Il ASSAY PRINCIPLES The Mouse IL 11 ELISA Enzyme Linked Immunosorbent Assay kit is an in vitro enzyme linked immunosorbent assay for the quantitative measurement of Mouse IL 11 in Cell Culture Supernatants Serum Plasma Tissue Homogenates This assay employs an antibody specific for Mouse IL 11 coated on a 96 well plate Standards and samples are pipetted into the wells and IL 11 present in a sample is bound to the well
3. resulting in presence of residual Streptavidin HRP Plate not developed long enough Improper calculation of standard curve dilution Sample matrix is masking detection Samples contain protein levels above assay range Uneven temperature around work surface Solution Increase number of washes Increase time of soaking between in wash Check dilution titration Reduce incubation time Decrease the incubation time before the stop solution is added Review protocol Check the condition of stored standard Reagents allows to come to 20 30 C before performing assay Increase number of washes Carefully Check dilution Use fresh plate sealer and reagent reservoir for each step Increase substrate solution incubation time Check dilution make new standard curve More diluted sample Recommended Dilute samples and run Again Avoid incubating plate in areas where environmental conditions vary Use plate sealer NOSTIC OR THERAPEUTIC PROCEDURES TECHNICAL SUPPORT For troubleshooting information or assistance please go online XVII NOTES FOR RESEARCH USE ONLY NOT FOR USE I NOSTIC OR THERAPEUTIC PROCEDURES
4. Centrifuge at approximately 1000 X g for 15 minutes Analyze the serum immediately or aliquot and store samples at 20 C Plasma Collect plasma using heparin or EDTA as an anticoagulant Centrifuge for 15 minutes at 1500 X g within 30 minutes of collection Assay immediately or aliquot and store samples at 20 C Cell Lysates Collect cells and rinse cells with PBS Homogenize and lyse cells throughly in lysate solution Centrifuge celllysates at approximately 10000 X g for 5 minutes to remove debris Aliquots of the cell lysates were removed and assayed Bone Tissue Extract demineralized bone samples in 4 M Guanidine HCl and protease inhibitors Dissolve the final sample in 2 M Guanidine HCl Tissue Homogenates Rinse tissue with PBS to remove excess blood chopped into 1 2 mm pieces and homogenize with a tissue homogenizer in PBS or in lysate solution lysate solution tissue net weight 10ml 1g i e Add 10ml lysate solution to 1g tissue Centrifuge at approximately 5000 X g for 5 minutes Assay immediately or aliquot and store homogenates at 20 C Avoid repeated freeze thaw cycles Urine Urinary samples should be cleared by centrifugation and then can be used directly without dilution Storage at 20 C 2 Mouse IL 11 Standard Preparation Reconstitute the lyophilized Mouse IL 11 Standard by adding 1 ml of Standard Sample Diluent to make the 2000 pg ml standard stock solution Allow FOR RESEARCH USE ONLY NOT FOR OR THERA
5. Streptavidin HRP Diluent and mixed thoroughly The solution should be prepared no more than 1 hour prior to the experiment FOR RESEARCH USE ONLY NOT FOR e OR THERAPEUTIC PROCEDURES 5 Wash Buffer Working Solution Preparation Pour entire contents 30 ml of the Wash Buffer Concentrate into a clean 1 000 ml graduated cylinder Bring final volume to 600 ml with glass distilled or deionized water 1 20 FOR RESEARCH USE ONLY NOT FOR USE I NOSTIC OR THERAPEUTIC PROCEDURES Vill ASSAY PROCEDURE The Streptavidin HRP Working Solution and TMB Substrate Solution must be kept warm at 37 C for 30 minutes before use When diluting samples and reagents they must be mixed completely and evenly Standard detection curve should be prepared for each experiment The user will decide sample dilution fold by crude estimation of protein amount in samples 1 Add 100 ul of each standard and sample into appropriate wells 2 Cover well and incubate for 90 minutes at room temperature or over night at 4 C with gentle shaking 3 Remove the cover discard the solution and wash plate 3 times with Wash Buffer Working Solution and each time let Wash Buffer Working Solution stay in the wells for 1 2 minutes Blot the plate onto paper towels or other absorbent material Do NOT let the wells completely dry at any time 4 Add 100 ul of Biotin Labeled Detection Antibody Working Solution into each well and incubate the plate at 37 C for 60 minutes
6. ES V MATERIALS REQUIRED BUT NOT PROVIDED 1 Microplate reader capable of measuring absorbance at 450 nm 2 Adjustable pipettes and pipette tips to deliver 2 ul to 1 ml volumes 3 Adjustable 1 25 ml pipettes for reagent preparation 4 100 ml and 1 liter graduated cylinders 5 Absorbent paper 6 Distilled or deionized water 7 Computer and software for ELISA data analysis 8 Tubes to prepare standard or sample dilutions Vl HEALTH AND SAFETY PRECAUTIONS 1 Reagents provided in this kit may be harmful if ingested inhaled or absorbed through the skin Please carefully review the MSDS for each reagent before conducting the experiment 2 Stop Solution contains 2 N Sulfuric Acid 504 and is an extremely corrosive agent Please wear proper eye hand and face protection when handling this material When the experiment is finished be sure to rinse the plate with copious amounts of running water to dilute the Stop Solution prior to disposing the plate FOR RESEARCH USE ONLY NOT FOR OR THERAPEUTIC PROCEDURES Vil REAGENT PREPARATION 1 Sample Preparation Store samples to be assayed within 24 hours at 2 8 C For long term storage aliquot and freeze samples at 20 C Avoid repeated freeze thaw cycles Cell culture supernates Remove particulates by centrifugation assay immediately or aliquot and store samples at 20 C Serum Allow the serum to clot in a serum separator tube about 4 hours at room temperature
7. Mouse IL 11 ELISA Kit User Manual Catalog MBS824693 Sandwich Enzyme Linked Immunosorbent Assay for Quantitative Detection of Mouse IL 11 Concentrations in Cell Culture Supernatants Serum Plasma Tissue Homogenates For research use only Not for diagnostic or therapeutic procedures FOR RESEARCH USE ONLY NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES Ie INTRODUCTION EE 2 1 ASSAY PRINCIPLES 3 Ih KIT COMPONENT S p 4 IV STORAGE 5 4 V MATERIALS REQUIRED BUT NOT 5 VI HEALTH AND SAFETY 5 nennen nennen 5 REAGENT PREPARATION eese nennen nennen le Seen 6 ASSAY PROCEDU RE 5 2 ni eorr enr rr tr tir e 9 IX ASSAY PROCEDURE 11 XD YPICAL iem ederet aeter MM o cocotte repe 12 XI SENSITIVITY iiiter urn as N e rere nnn 12 XII SPECIFICITY rete eres 12 XIII CROSS REACTIVITY 1 fierent eite 13 REFERENCES ia 13 XV TROUBLESHOOTING GUIDE eese een mnn nennen nennen enne 14 XVI TECHNICAL SUPPCOM INK iieri rere teer t egre n etate entree 15 XVII ej dcm me A oem EUER 15 FOR RESEARCH USE ONLY NOT FOR Qe
8. OT FOR USE I NOSTIC OR THERAPEUTIC PROCEDURES IX ASSAY PROCEDURE SUMMARY Prepare all reagents samples and standards Add 100 ul Standard or Sample Wash plate 3 times with Wash Buffer Working Solution Wash plate 3 times with Wash Buffer Working Solution m v hd Add 100 ul Streptavidin HRP Wa g Solution b Wash plate 5 times Wash Buffer Working Solution Add 100 ul TN y ubstrate Solution f z Add 100 ul Stop Solution A Readthe plate at 450nm FOR RESEARCH USE ONLY NOT FOR Q OR THERAPEUTIC PROCEDURES X TYPICAL DATA The standard curve is for demonstration only A standard curve must be run with each assay 10 E 7 8 lt 0 1 TUNE L a a 1 10 100 1000 Mouse IL 11 Concentration pg ml SENSITIVITY The minimum detectable dose of Mouse IL 11 is typically less than 15 pg ml XII SPECIFICITY The Mouse IL 11 ELISA Kit allows for the detection and quantification of endogenous levels of natural and or recombinant Mouse IL 11 proteins within the range of 31 25 pg ml 2000 pg ml FOR RESEARCH USE ONLY NOT FOR OR THERAPEUTIC PROCEDURES XIII CROSS REACTIVITY No detectable cross reactivity with other relevant proteins REFERENCES 1 McKinley D Wu Q Yang Feng T Yang YC 1992 Genomic sequence and chromosomal location of human interleukin 11 gene IL11 Geno
9. PEUTIC PROCEDURES solution to sit at room temperature for 5 minutes then gently vortex to mix completely Use within one hour of reconstituting Two tubes of the standard 2 ng per tube are included in each kit Use one tube for each experiment Perform 2 fold serial dilutions of the top standards to make the standard curve within the range of this assay 31 25 pg ml 2000 pg ml as below Standard Sample Dilution Buffer serves as the zero standard 0 pg ml Standard Add Into 2000 pg ml 1000 pg ml 500 of the Standard 2000 pg ml 500 ul of the Standard Sample Diluent 500 pg ml 500 ul of the Standard 1000 pg ml 250 pg ml 500 ul of the Standard 500 pg ml 125 pg ml 500 ul of the Standard 250 pg ml 62 5 pg ml 500 ul of the Standard 125 pg ml 31 25 pg ml 500 ul of the Standard 62 5 pg ml 0 ng ml 1 ml of the Standard Sample Diluent Note The standard solutions are best used within 2 hours The 2000 pg ml standard solution should be stored at 4 for up to 12 hours or at 20 C for up to 48 hours Avoid repeated freeze thaw cycles 3 Biotin Labeled Detection Antibody Working Solution Preparation The Biotin Labeled Detection Antibody should be diluted in 1 100 with the Detection Antibody Diluent and mixed thoroughly The solution should be prepared no more than 2 hours prior to the experiment 4 Streptavidin HRP Working Solution Preparation The Streptavidin HRP should be diluted in 1 100 with the
10. mics 13 3 814 9 2 Sims Jenkins BJ Nakamura A Quinn JM Li R Gillespie MT Ernst M Robb L Martin TJ July 2005 Interleukin 11 receptor signaling is required for normal bone remodeling Journal of Bone and Mineral Research20 7 1093 102 3 Takeuchi Y Watanabe S Ishii G Takeda S Nakayama K Fukumoto S Kaneta Y Inoue D Matsumoto T Harigaya K Fujita T Interleukin 11 as a stimulatory factor for bone formation prevents bone loss with advancing age in mice J Biol Chem 277 49011 49018 2002 FOR RESEARCH USE ONLY NOT FOR O OR THERAPEUTIC PROCEDURES XV TROUBLESHOOTING GUIDE Problem High signal and background in all wells No signal Too much signal whole plate turned uniformly blue Standard curve achieved but poor discrimination between point No signal when a signal is expected but standard curve looks fine Samples are reading too high but standard curve is fine Edge effect FOR RESEARCH USE ONLY NOT FOR USE I Possible Cause Insufficient washing Too much Streptavidin HRP Incubation time too long Development time too long Reagent added in incorrect order or incorrectly prepared Standard has gone bad If there is a signal in the sample wells Assay was conducted from an incorrect starting point Insufficient washing unbound Streptavidin HRP remaining Too much Streptavidin HRP Plate sealer or reservoir reused
11. s by the immobilized antibody The wells are washed and biotinylated anti Mouse IL 11 antibody is added After washing away unbound biotinylated antibody HRP conjugated streptavidin is pipetted to the wells The wells are again washed a TMB substrate solution is added to the wells and color develops in proportion to the amount of IL 11 bound The Stop Solution changes the color from blue to yellow and the intensity of the color is measured at 450 nm FOR RESEARCH USE ONLY NOT FOR Q OR THERAPEUTIC PROCEDURES KIT COMPONENTS 96 well Plate Coated With Anti Mouse IL 11 Antibody 12 x 8 Strips Mouse IL 11 Standard 2ngx2 Biotin Labeled Detection Antibody 100X 120 ul Streptavidin HRP 100X Standard Sample Diluent Detection Antibody Diluent Streptavidin HRP Diluent Wash Buffer 20X TMB Substrate Solution Stop Solution 12 ml Plate Adhesive Strips Technical Manual 1 Manual IV STORAGE AND STABILITY All kit components are stable at 2 to 8 C Standard recombinant protein should be stored at 20 or 80 recommended at 80 after reconstitution Opened Microplate Wells or reagents may be store for up to 1 month at 2 to 8 C Return unused wells to the pouch containing desiccant pack reseal along entire edge Note the kit can be used within one year if the whole kit is stored at 20 C Avoid repeated freeze thaw cycles FOR RESEARCH USE ONLY NOT FOR 0 OR THERAPEUTIC PROCEDUR
Download Pdf Manuals
Related Search