Release Notes - Oracle Documentation
Contents
1. DirectModel JT Options Configure options for JT files Options Parameter Description Default JTRESOLUTION lt HI When available enables users to load the model s high medium and low HI MED LO gt resolution meshes Note It is recommended to reduce the model s resolution mesh to LO if loading large complex assemblies degrades performance or utilizes significantly high memory resources MicroStation Options Configure options for MicroStation files Options DGNDISABLEZCLIP lt 011 gt DGNSHOWZEROLENGTHLI NES lt 011 gt Specifies whether to take the z axis into consideration when applying a clip region a cut out region to a 2D drawing Set to 1 if the contents of the clipped image should not be restricted based on the z coordinate of individual objects Set to 0 if the contents of the clipped image should be restricted based on the z coordinate of individual objects Note This option only applies to 2D drawings it is not considered when loading a 3D model Note Option applies to Microstation 7 files Set to 1 to display zero length lines as fixed sized filled squares Set to 0 to ignore zero length lines Note Option applies to Microstation 7 files February 28 2011 DGNLSTYLEDASHDOT Defines up to seven line styles indexed from 1 to 7 Each line style lt description gt lt number of separated by a comma can include up to six patterns Each line style patterns gt lt2. products and services from third parties Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third party content products and services Oracle Corporation and its affiliates will not be responsible for any loss costs or damages incurred due to your access to or use of third party content products or services 33 February 28 2011
3. 5 Drawings e Added font substitution for missing native fonts 19 February 28 2011 e Improved model tree display more accurate name and hierarchy display CATIA 4 e Added notification for missing XREFs to the model tree e Added font substitution for missing native fonts Unigraphics e Added support for Unigraphics NX5 e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes e Added font substitution for missing native fonts SolidDesigner e Added support SolidDesigner 2007 versions 15 00 15 00A 15 00B 15 50 15 50A e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes Parasolids e Added support for versions 19 0 and 18 1 Autodesk Inventor e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes e Improved parsing of Inventor files SolidWorks e Added support for SolidWorks version 2008 e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes e Removed support for INI option SWS YMBOLFILE Location to the symbol file can now be specified using the font path CFONTPATHS ini option SolidEdge e Added support for SolidEdge version 20 IGES e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes Pro ENGINEE
4. Specifies whether to show the markup save dialog for a Markup file when a user exits 1 E lt 011 gt Markup mode Tf set to 0 the user is not prompted to save the markups when exiting Markup mode If set to 1 the user is prompted to save the markups ONLYONEREDLINEFI Set to 1 to only allow users to create a single markup file 0 LE lt 0I1 gt Se to 0 to remove markup file create limitation AutoCAD Options Configure options for AutoCAD drawings Options Parameter Description Default ACADDEFAULTSHAPEFONT Specifies the default shape font filename that should be used if the desired shape font file and an equivalent AutoVue font cannot be found You can specify a full file path or just the file name The decoder searches for the font file name in the file path if provided the base file folder XFONTPATHS and the fonts directory of the installation SHOWNONRECTVIEWPORTS In AutoCAD it is possible to create non rectangular viewports Whena 1 lt 011 gt file has non rectangular viewports it may take AutoVue longer to display the drawing Set to 1 to display non rectangular viewports Set to 0 to disable display of non rectangular viewports and improve performance Note that the accuracy of the display will be compromised Note This options applies to AutoCAD 2000 and up files 11 February 28 2011 Cadence Options Configure options for Candence Concept HDL file ECAD Parameter Description Default CADENCE_CALLOUT
5. can assign int any integer greater than 0 LAYERS Parameter Description Default OUTLINECOLOR i Specifies the color to use when drawing outlines for graphics such as points lines 1 nt FILLCOLOR int polygons and so on Possible integer range 1 255 Set to OUTLINECOLOR 1 so that an internal counter is used to determine the color The counter is incremented a maximum of two times per layer and only if it is required once for the outline color if it is not provided and once for the fill color if it is not provided Example If a user provides valid outline and fill colors the counter is not incremented for the given layer However if the user only provides a valid outline color the counter increments once for the given layer Specifies the color to use when the drawing fills for graphic such as polygons 1 Possible integer range 1 255 Set to FILLCOLOR 1 so that an internal counter is used to determine the color The counter is incremented a maximum of two times per layer and only if it is required once for the outline color if it is not provided and once for the fill color if it is not provided Example If a user provides valid outline and fill colors the counter is not incremented for the given layer However if the user only provides a valid outline color the counter increments once for the given layer LINEWIDTH int Specifies the line width to used when drawing graphics 0 Possib
6. constant width polylines When set to 1 pen settings affect non zero constant width polylines Specify the path of the font mapping file docfont map to use for word documents Syntax Options CustomDocFontSubstitution lt path gt The docfont map contains font mapping information that identifies what font to use if a font is missing If you wish to modify font mappings update docfont map Enable or disable hyperlinks or attachments in Outlook MSG files 0 Hyperlink on Attachment on 1 Hyperlink on Attachment off 2 Hyperlink off Attachment on 3 Hyperlink off Attachment off Syntax Options OutlookLinkFlag lt 0 1 2 3 gt Enable or Disable download of images and other web images when viewing Outlook MSG files Syntax Options Download WebResources lt 0 1 gt docfont map in avwin fonts 26 March 04 2011 Parameter Description Default STEPHideCG STEPFacePositiveColor Set to 1 to hide all construction geometry in the STEP file Syntax Options STEPHideCG lt 0 1 gt Option applies to STEP files When set to 1 AutoVue uses either the color for BOTH sides of the face if it is set or the color of the positive face side if it is set When set to 0 AutoVue uses either the color for BOTH sides of the face if it is set or selects the positive or negative face side color depending on the face sense Syntax Options ST
7. the following formats e AutoCAD e MicroStation e HPGL e MEI10 e Autodesk DWF EDA Formats e Added support for Zuken Cadstar version 9 0 e Added support for PADS version 2007 e Added support for OrCAD Layout and Schematics version 16 e Added support for Occurrence Attributes OATs for DxDesigner e Added INI option ECAD_LOAD_3D_PAGE to enable disable loading of 3D pages for EDA formats that contain 3D pages See New INI File Settings on page 24 e Improved performance for Allegro Layouts e Added font substitution for missing native fonts for the following formats e Altium Designer Protel e OrCAD Layout e Cadence Allegro e Cadence Allegro IPF e Mentor BoardStation e Mentor PADS e Zuken CADSTAR e P CAD e PDIF e Maintenance and bug fixes for the following formats e Cadence Allegro e Zuken CADIF e DxDesigner 21 February 28 2011 e Expedition IDF e Mentor BoardStation e ODB e OrCAD e Protel Altium Designer e Specctra e Zuken CadStar Office Formats Added support for Word version 2007 Added support for Excel version 2007 Added support for Visio version 2007 Added support for vertical text for Word Added support for external font mapping for the following formats e Word e RTF See docfont map that is at lt AutoVue Installation Directory gt avwin fonts Added support for grouped shapes for the following formats e Excel e PowerPoint Added new option OutlookLinkFlag for Microsoft Outlook formats to disab
8. EPFacePositiveColor lt 0 1 gt 0 IFCCOLORS Specify group element colors for IFC files Syntax Options IFCCOLORS GROUP_ELEMENT_NAME zg b or IFCCOLORS GROUP_ELEMENT_NAME col or_name where GROUP_ELEMENT_NAME is the name of the group element For example DOORS WINDOWS WALLS 1 g b is the RGB value for the color color_name is the string representing the color All color definitions should be on the same line and should be separated by spaces For example IFCCOLORS WALLS WHITE DOORS GREEN WINDOWS BROWN Special element name OTHERS is used for all elements that are not in the color definition Special color NONE is used when you want to use the 3D default element color for a group element IFC pre defined color extension is defined as below Color Name R GB LIGHTCYAN 188 255 255 BROWN 205 91 69 LIGHTYELLOW 255 219 153 CADETBLUE 122 197 205 IFCCOLORS WALLSTANDAR DCASES 255 255 255 CURTAINWALL 255 255 255 DOORS 255 219 153 OTHERS 0 255 2 55 SLABS 205 91 69 WALLS 255 255 255 WINDOWS 122 197 205 February 28 2011 Parameter Description Default IFCCOLORS_MODE IFCREADProperties Define the mode for default element colors for 3 IFC models Syntax Options IFCCOLORS_MODE lt 0 1 2 3 gt where 0 Mechanism of default element color is turned off i e colors are set from the file or if color is not specified in the file the 3D default colo
9. Government or anyone licensing it on behalf of the U S Government the following notice is applicable U S GOVERNMENT RIGHTS Programs software databases and related documentation and technical data delivered to U S Government customers are commercial computer software or commercial technical data pursuant to the applicable Federal Acquisition Regulation and agency specific supplemental regulations As such the use duplication disclosure modification and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract and to the extent applicable by the terms of the Government contract the additional rights set forth in FAR 52 227 19 Commercial Computer Software License December 2007 Oracle USA Inc 500 Oracle Parkway Redwood City CA 94065 This software is developed for general use in a variety of information management applications It is not developed or intended for use in any inherently dangerous applications including applications which may create a risk of personal injury If you use this software in dangerous applications then you shall be responsible to take all appropriate fail safe backup redundancy and other measures to ensure the safe use of this software Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications This software and documentation may provide access to or information on content
10. I captures views reference geometries and hyperlinks for some MCAD formats See MCAD Formats on page 19 to identify the formats that have support for these entities Markup Functionality Replaced the text entity with a text box entity with ability to draw a box and type text directly in the box Text automatically wraps around when text box width is reached Text box height is automatically set to the height of the contained text Added option to set box visibility off from the Markup Entity Properties dialog box Enhanced the leader entity A text box is created when a leader is created and text can be typed directly in the text box Text automatically wraps around when text box width is reached Text box height is automatically set to the height of the contained text Added ability to set box visibility off from Markup Entity Properties dialog box Added alignment options to the leader entity Leader text can be aligned w r t the leader polyline Alignment options are available in the Markup Entity Properties dialog box Added support for file attachment markup entity Users can now add attachments to markup files Added support for signoff entity for 3D drawings Added numbering for note entities Note entities created are automatically numbered sequentially If you wish to disable automatic numbering set INI option NOTENAME_AUTOGEN to 0 See New INI File Settings on page 24 Added support for filtering markup entities Entities can be
11. ORACLE Release Notes Oracle AutoVue 20 0 1 Desktop Version For the most up to date version of this document go to the AutoVue Documentation Web site on the Oracle Technology Network at http www oracle com technetwork documentation autovue 091442 html Application User License AutoVue includes an AutoVue Desktop Version a Desktop Deployment and a Client Server deployment For Application User licensing metric in the Component licensing model or Custom Suite User licensing metric in the Custom Applications Suite licensing model a single license cannot be split or shared between two users e g one user using the AutoVue Desktop Version and a different user using the Desktop Deployment would require two licenses System Requirements e Windows XP 32 bit e Windows Vista 32 bit e The installation requires about 400MB of free space Note The memory requirement is dependent on the size and complexity of files you try to view with AutoVue MCAD Formats e Added support for Autodesk Inventor 2011 e Added support for JT version 9 1 e Added support for CATIA V5 R20 e Added support for SolidWorks 2011 e Added support for SolidDesigner CoCreate Modeling versions 16 00C 16 00D 16 00E 16 50 16 50A 16 50B and 17 00 e Added support for IGES 3D e Added support for shaded views in 2D Inventor files e Added support for SolidEdge assembly features e Improved support for colors and transparency for SolidEdge parts and assemblies e Gen
12. R e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes e Added font substitution for missing native fonts e Added support for PMI external hyperlinks e Added support for Hyperlinks in 2D files for files saved with no display lists STEP e Added support for XREFs for STEP Assemblies e Improved handling of large models e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes Maintenance and bug fixes for the following formats e ACIS e CATIA 4 e CATIA 5 e Autodesk Inventor e SolidEdge SolidDesigner e SolidWorks e Pro ENGINEER 20 February 28 2011 e IGES e STEP e Unigraphics AEC Formats e Added support for IFC format e Added support for AutoCAD version 2009 files e Added support for the following new features for AutoCAD version 2008 files e MicroStation 8 underlays in AutoCAD drawings e Paragraph based text formatting e Added support for Mechanical Desktop version 2008 e Added support for ME10 Onespace Designer Drafting 2007 versions 15 00A 15 00B 15 50 15 50A e Added drawing entity information support for AutoCAD 2008 e Added support for TTF fonts for ME10 files e Added support for SmartSketch version 2007 e Added font substitution for missing native fonts for the following formats e AutoCAD e MicroStation 7 and 8 e ME10 OnceSpace Designer e Maintenance and bug fixes for
13. S Specifies the full path to a callouts file The callouts file is used to create abstract FILE lt file path gt mechanical part entities for the design CATIA Options Configure options for CATIA 4 and 5 files Options Parameter Description Default CATIALOADPMI Set to 1 to enable displaying of PMIs 1 lt 011 gt Set to 0 to disable displaying of PMIs CSI Shapefile Project Files CSI shapefile project files CSHP files are used to overlay multiple ESRI shapefile drawings Project files specify the shapefiles that should be overlayed and general information such as units and point options Project files are formatted as standard INI configuration settings files Comments in CSHP files begin with a semi colon Note A CSI shapefile project file must begin with the following line CSI shapefile project file PROJECTPROPERTIES Parameter Description Default UNITS Specifies the file units Possible values px inches millimeters gt mm e twips centimeters e cm decimeters dm e meters e m e kilometers e km feet e yards miles millimeters micromiles microns microinches 12 February 28 2011 POINTYPE Specifies what shape to use when drawing a point Custom Possible values Circle e Triangle e Square Star Dot e Plus Cross Diamond Custom POINTSIZE int Specifies what size to use when drawing a point T You
14. Vue should display a file s native highlighting 1 GHTS lt 011 gt Set to 0 so that the native highlighting in the file is ignored during display Set to 1 so that the native highlighting in the file is applied during display Excel Options Configure options for Excel files Options USESMALLFONTSFOREXCELS Set to 1 so that the Excel Small Fonts font is used to display text at 0 MALLTEXT lt 011 gt small fonts sizes of 7 points or less matching Excel behavior Set to 0 so that the Small Fonts font is not used Note This parameter has effect only if the Small Fonts font is installed on the system it usually comes with Excel 14 February 28 2011 Gerber Options Configure options for Gerber files Gerber Format ENDOFCOMMAND lt ASTERISK DOLLAR ENDOFLINE AUTODETECT gt MULTIQUADRANT_ARCS_BY_ DEFAULT lt 011 gt Specifies the end of command character if known If end of command AUTODE character is not known ENDOFCOMMAND can be set to AUTODETECT mode Available values ASTERISK End of command is DOLLAR End of command is ENDOFLINE End of command is the end of the line TECT AUTODETECT AutoVue automatically detects the end of command character single quadrant Set to 0 so that the circular interpolation is single quadrant Set to 1 so that the circular interpolation is multi quadrant Specifies whether the default circular interpolation is multi quadrant or 0
15. aphics NX6 e Added support for Solid Edge ST and ST2 e Added support for Autodesk Inventor 2010 2009 e Added support for Cocreate Modeler versions 2008 16 XX e Added support for Revit 2010 through exchange format e Added support for Solidworks 2010 and 2009 e Added support for CATIA 5 R19 e Re introduced support for DirectModel JT versions 8 1 8 7 and 6 4 e Added support for Unicode file names e Added support for Chamfer Bend Notes and Revision tags for Autodesk Inventor drawings e Added support for one symbol diameter dimensions for CATIA 5 drawings e Added support for Parasolids version 22 0 21 0 20 0 and 19 1 e Added support for STL assemblies e General enhancements for CATIA 4 e Performance improvements for CATIA 4 e Added support for PMIs e Improved support for text display alignment orientation and positioning e Improved support for text frames e Consolidated CATIA 5 INI options CATIASShowPMI and CATIAS5ShowPMIWithMesh into a single INI option CATIALOADPMI See New INI File Settings on page 9 e Added support for project related attributes for IFC e General bug fixes for e Pro Engineer e Unigraphics e CATIA 4 e CATIA 5 e SolidWorks e SolidEdge e Autodesk Inventor e Directmodel JT e IFC e STEP AEC Formats e Added support for Smartsketch version 2009 6 February 28 2011 Added support for Cocreate Drafting 2008 16 XX Added support for AutoCAD Autodesk Mechanical Desktop version 2010 2009 Added supp
16. d in the C windows directory by default e Custom translation properties files located in the lt AutoVue Install Folder gt avwin directory e Custom markup symbol libraries located in the lt AutoVue Install Folder gt avwin Symbols directory e Thumbnails cache if any located in the lt AutoVue Install Folder gt avwin folders directory If you decide to move these settings content forward to your new installation of AutoVue they can for the most part be copied to the same relative locations in your new installation However for the Auto Vue settings in avwin ini it is best to manually copy the specific settings that you would like to keep as the newer version of AutoVue may have important new settings 1 n 1 February 28 2011 Installing AutoVue To install Oracle AutoVue download the Oracle Auto Vue Media Pack and extracts its contents Run avsetup exe located in the AutoVueDesktopVersion folder Follow on screen instructions Refer to the Installation and Administration Manual for detailed instructions Conversion Enhancements Updated the Conversion to PDF feature When converting a file to PDF Markups are now included as graphical elements in the PDF instead of being added as annotations to the PDF If you wish to revert to the old behavior convert to PDF annotations set INI option CONVERTPDFTHROUGHPRINTING to 0 MCAD Formats e Added support for Pro Engineer WildFire 5 and WildFire 4 e Added support for Unigr
17. eful when 2 OEMF lt 0 112 gt troubleshooting display issues with WMF Set to 0 to disable conversion of WMF to EMF Set to 1 to convert WMF overlays to EMF Set this value if enhanced functionality such as rotate and mirroring is required Set to 2 use default behavior of the format handler Text Options Configure options for text files Options Parameter Description Default MAXPLAINTEXTP Sets the maximum number of plain pages to be loaded 1000 AGES num The option only affects unformatted text other types of documents Word RTF and so on are not affected Note Setting the option value to 0 or less results in the entire file loading 10 February 28 2011 Acrobat PDF Options Configure options for Adobe PDF files Options Parameter Description Default PDFENHANCELINES If set to 1 this option results in enhanced line display similar to the 0 Adobe Acrobat option Enhance Thick Lines This option is useful for cases when lines start to disappear in the AutoVue display when zooming out If set to 0 this option is disabled and the line display is not enhanced PDFMAXIMAGESIZEMB lt val gt Allows users to set the maximum image sizelimit in Mbytes of large 150 bitmaps in PDF files after which the PDF decoder starts reducing resolution to reduce memory use ActiveX Options Configure parameters for ActiveX options in avx ini Options Parameter Description Default ASKTOSAVEREDLIN
18. eral bug fixes e CATIA V5 e Inventor e IGES e JT e Pro ENGINEER e SolidEdge SolidDesigner e SolidWorks 1 February 28 2011 AEC Formats Added support for AutoCAD 2011 and AutoCAD Mechanical 2011 Added support for CoCreate Drafting versions 16 00A 16 00B 16 00C 16 00D 16 00E 16 50 16 50A 16 50B and 17 00 Added support for JPEG compression scheme 7 for TIFF files Added support for transparency in JPEG2000 files General bug fixes e AutoCAD e CGM e HPGL TIFF e MicroStation e Cocreate Drafting e Visio e JPEG EDA Formats Added support for Zuken CADSTAR 12 0 PCB Schematics Added support for Mentor Board Station and Design Architect versions 8 11 8 12 and 8 13 Added support for ODB version 7 0 Added support for Orcad Capture 16 3 Added support for Cadence non archived projects Added support for variant views in Cadence projects Added support for the Allegro Module Definition Database files mdd Added support for Cadence Schematic Symbol files css General bug fixes for all supported EDA formats Office Formats General enhancements for Excel files e Added support for shape transparency e Improved support for round off error e Improved printing e Added boolean cell support e Improved support for Hyperlinks General bug fixes e Word e Excel e Adobe PDF Documentation The following documents have been updated in 20 0 1 Installation and Administration Manual User s Man
19. filtered by author page entity type layer or modification date Moved markup list markup tree to the bottom of the workspace Added ability to move the markup tree by drag and drop action Disabled markups for office formats by default Office formats render differently on different machines if the fonts on the machines vary Due to differences in fonts documents may have line breaks and page breaks that vary from one machine to another This could result in a situation where markup entities appear misplaced w r t underlying text in documents If you would like to re enable markup creation for office formats we recommend that you ensure that all machines viewing the office formats have the same fonts installed To enable set INI option EnableOfficeMarkups to 1 See New INI File Settings on page 24 Removed the OLE markup entity from the Desktop Version Added INI option EnableOLEEntity to re enable OLE markup entity See New INI File Settings on page 24 MCAD Formats CATIA 5 e Added support for CATIA 5 R18 e Added support for CATIA 5 R17 SP5 SP6 e Added support for PostScript fonts for CATIA 5 Drawings e Added notification for missing XREFs to the model tree e Added support for file properties on the model tree nodes e PMI Enhancements e Added support for Captures e Added support for Views e Added support for Reference Geometries e Added support for PMI external hyperlinks e Added support for Raster Fill patterns for CATIA
20. gro Extract e GenCam e Mentor Neutral e GDS II Raster based Engineering Formats e EDMICS e GTX e Hitachi e JEDMICS Vector Graphics formats e Corel Presentation Exchange e Lotus PIC file image e SVG e WordPerfect Graphics Hybrid Engineering Formats e GTX Raster amp Bitmap Formats e AMIGA e CorelDraw Bitmap Preview e CUT Raster e Databeam e GEN IMG Bitmap e MAC e SUN Raster e WordPerfect Graphics Bitmap FAX Formats e Brooktrout e Everfax e Frecom e Fujitso e Gamma e Generic Fax e Hybrid J T e Intel e Net Fax e Product R amp D Fax Modem e Raw Group II e Relisys e Ricoh e SciFax e SmartFax e Trigem e WinFax Pro e Worldport Word processor Formats N Oo February 28 2011 e Amipro Document e Amipro Style Sheet e Microsoft Write e Word for DOS e WordPerfect e WordStar e Database Formats e Access e Database Express e FOX Dbase e Spreadsheet Formats e Lotus 1 2 3 e Lotus symphony e Quattro e Quattro Pro for DOS e Quattro Pro for Windows e Symphony Features Desupported in AutoVue 19 3 e Removed support for the following INI options for Adobe PDF documents e OverridePDFPrintSecurity e SHOWPDFIMAGESINTRUECOLOR e Nesting of a text markup entity with another markup entity is no longer supported New INI File Settings ECAD Parameter Description Default ECAD_LOAD_3D_PAGE Enable or disable display of 3D models of EDA 1 files Set to 0 to disable display of 3D m
21. he base file from which you originally created the Mobile Pack Refer to the AutoVue user guide for more information regarding creating opening and working with Mobile Packs Note Creating a Mobile Pack from a DMS ERP PLM UCM system and updating your backend system from a Mobile Pack are only supported with the Web Version and require the AutoVue Mobile product installed with the Web Version Note Defining markup policy is only supported with the Web Version However defined markup policies are valid when you are marking up a Mobile Pack using the Desktop Version MCAD Functionality e Enhanced the look and feel of the 3D workspace e Added a second light profile with 2 positional light sources e Added support for gradient background for 3D workspace Gradient background can be set from the Configure dialog box e Added support for adding image background for 3D workspace Image background can be set from the Configure dialog box e Improved 3D Axes look e Added reflective and reflective wire rendering modes to give 3D models a metallic look e Added support for missing XRefs notification in the model tree See MCAD Formats on page 19 to identify the formats that use this functionality 18 February 28 2011 Added support for file properties on model tree nodes This is displayed as another tab in the Entity properties dialog See MCAD Formats on page 19 to identify the formats that use this functionality Added support for PM
22. hen enabled when you open and close a file AutoVue generates a streaming file Subsequent rendering of this file reads the streaming file Syntax Metafiles Enabled lt 0 1 gt Specify path to the folder where streaming files None will be stored Syntax Metafiles Folder C AutoVue StreamingFiles Specify the size limit for the folder where 0 streaming files will be stored When set to 0 there is no size limit for the folder When set to a number this will be the size limit for the folder in MegaBytes Syntax Metafiles ControlSize 512 Enable disable the support for streaming file 1 creation When set to 1 streaming file writing creation and reading is allowed When set to 0 streaming file writing is disabled and streaming file reading is allowed Syntax Metafiles WriteEnabled 0 Enable disable creation of streaming files for 0 PDF format When set to 0 streaming file will not be generated for PDF When set to 1 streaming file will be generated for PDF February 28 2011 Export Options Parameter Description Default EXPORTTESSELLATIONTO Control the mesh density when converting to 3D 0 L STL Meshes are more dense if tolerance value is smaller Syntax Export Options EXPORTTESSELLATIONTOL val where val can be 0 01 0 005 0 001 0 0001 Auto VueMobile Parameter Description Default FileStreamEncryption Specify Encryption algorithm for both Markup RC4 and M
23. hical elements Set to 0 to convert to PDF annotations GUILOCALE Specifies the locale to use for the AutoVue GUI enlfrideljalkoltwizh Note If no locale is set AutoVue automatically detects the machine s OS and sets the GUI to the specified locale Options en English fr French de German ja Japanese ko Korean tw Traditional Chinese zh Simplified Chinese 9 February 28 2011 REPLACEMENTFONTS fontl fon Specifies a list of replacement TrueType fonts to use when required 12 fontn TrueType fonts do not have the required glyphs This option applies to all 2D vector formats containing non English TrueType text Specify a semicolon separated list of font face names PRESERVE2DMOUSETOOL lt 0 If set to 1 it preservers mouse status when switching between 2D 1 documents Markup Options Configure a variety of Markup options such as symbol for markup dimensions Markup Options Parameter Description Default TRUEBACKGROUND Used when a highlight markup is applied on a colored background for 0 lt Ol1 gt example graphic filled cell areas in office document tables Set to 1 for a dithered highlight markup Set to 0 for a normal highlight markup Overlay Options Configure Overlay options that apply to laying files over the current active document Options Parameter Description Default CONVERTWMFT Specifies if the WMF should be converted to EMF This is option is us
24. ile and run avsetup exe If you obtained the CD for AutoVue run avsetup exe that is in the win32 folder Follow on screen instructions to complete the installation Functionality Enhancements e Developed a new streamlined user interface for Auto Vue e Redesigned icons e Rearranged menu items based on usability studies e Added support for multiple look and feel schemes See ini option GUILOOK in section New INI File Settings on page 24 e Renamed Cimmetry Metafile to AutoVue Streaming File e Added support for streaming file for the Desktop Version Streaming file is a file format that is developed by Oracle that helps accelerate the display of large or complex designs and ensures optimized performance and 17 February 28 2011 high speed data delivery Streaming file speeds up subsequent loads of the file This is disabled by default Go to the Configure dialog to enable creation of streaming files e Enhanced 3D look and feel See MCAD Functionality on page 18 for more on 3D look and feel and other 3D enhancements e Enhanced Markup functionality Added filtering of markup tree added text box entity See Markup Functionality on page 19 AutoVue Mobile Developed AutoVue Mobile to enable viewing and marking up of design documents in a disconnected mode AutoVue Mobile also enables you to share design documents and markups with your partners or suppliers that do not have access to your backend systems Using AutoVue Web Vers
25. ion you can create a Mobile Pack for a file from your backend DMS ERP PLM UCM system Once the Mobile Pack is created you can provide it to your suppliers partners or you can access the file from a disconnected environment You can use AutoVue Desktop Version in order to view and markup the file in the Mobile Pack when there is no access to the Web Version If you added markups to the Mobile Pack you can update your backend system with the markups from the Mobile Pack using AutoVue Web Version When creating a Mobile Pack you can include the base file all the external resources fonts xrefs needed to fully display the file and associated markups in the Mobile Pack You can choose to include the streaming file instead of the base file You can also include PDF or TIFF renditions in addition to the base streaming file when creating the Mobile Pack You can also create policies to govern whether or not users that access the Mobile Pack can create new markups modify existing markups or delete markups Once a Mobile pack is created you can view the drawing and markups by viewing the Mobile Pack You can create new markups or consolidate existing markups into one markup or create a master markup that loads automatically when you view the Mobile Pack When you have access to your DMS ERP PLM UCM system you can update all the markups from the Mobile Pack into the backend system These markups will be imported into the system and will be associated with t
26. le hyperlinks or attachments or both See New INI File Settings on page 24 General Enabled interface for customized resource resolution DLL to give integrators more flexibility to locate external resources Sample source code and DLL is located in the integrat VisualC reslocate directory Added INI option ResLocateDII to enable the custom resource resolution DLL See New INI File Settings on page 24 Added new INI options to the ActiveX control to control visibility of the layers and blocks dialog boxes See descriptions for Layers and Blocks in New INI File Settings on page 24 Options should be set in ActiveX s INI file default avx ini Consolidated all Service Pack releases for 19 2 into this 19 3 release Documentation A document for performance related ini options PerformanceRecommendations pdf is included This document provides some guidelines that can help improve file load and manipulation performance It is located in lt AutoVue Installation Directory gt docs Formats Desupported in AutoVue 19 3 Due to low customer demand Oracle AutoVue has dropped support for some file formats This allows Oracle AutoVue to on formats that matter most in our key markets Below is the list of file formats that are de supported in release 19 3 CAD amp Vector based Engineering Formats e Anvil 22 February 28 2011 e CALCOMP e Generic CADD e STEP KOSDIC e VDA FS Electronic Design EDA Formats e Cadence Alle
27. le integer range 0 100 VISIBLE lt 0I1 gt Specifies the visibility of the shapefile 1 Set to 1 to make the shapefile visible when initially loading the CSI shapefile project Set to 0 to make the shapefile invisible when initially loading the CSI shapefile project 13 February 28 2011 POINTTYPE Specifies what shape to use when drawing a point Custom Note If a POINTTYPE is not provided for the a given LAYER section then the POINTTYPE provided in PROJECTPROPERTIES section is used Possible values e Circle e Triangle e Square e Star e Dot e Plus e Cross e Diamond e Custom POINTSIZE Specifies what size to use when drawing a point 7 FILENAMF file path ECAD Options Note If a POINTSIZE is not provided for the a given LAYER section then the POINTSIZE provided in PROJECTPROPERTIES section is used You can assign num any integer greater than 0 Specifies the name of the ESRI shapefile drawing Specify configuration options for ECAD ECAD ECAD_3D_CUTOUTDRILLHOLE Specifies whether to cut drill holes out of the 3D model of the board 0 S lt 011 gt Set to 1 to cut out drill holes Set to 0 to disable drill holes Note Setting this option to 1 increases the amount of memory required to load the 3D model Also for DMU purposes this option should be set to 1 to correctly check for interference for parts that go through the drill holes ECAD_SHOW_NATIVE_HIGHLI Specifies whether Auto
28. log method and layer icon from GUI Set 0 to enable Option valid for ActiveX only Syntax Disable Layers lt 0 1 gt Set 1 to disable ShowBlocksDialog method and block icon from GUI Set 0 to enable Option valid for ActiveX only Syntax Disable Blocks lt 0 1 gt 0 Markup Options Parameter Description Default NOTENAME_AUTOGEN ATTACHMENT_MAX_SIZE EnableOLEEntity Set to 0 to disable auto numbering of note entities Set to 1 to enable auto numbering Syntax Markup Options NOTENAME_AUTOGEN lt 0 1 gt Specify the maximum size for attachment markup entities When creating attachment markup entities if attachment size exceeds an error message appears to indicate that attachment size exceeds the limit Syntax Markup Options ATTACHMENT_MAX_SIZE lt value gt value is in MegaBytes Set to 1 to re enable OLE markup entity When set to 1 OLE entity creation is available through the menu Markups gt Add Entity gt More gt OLE Entity OLE markup entity is disabled by default in version 19 3 Syntax Markup Options EnableOLEEntity lt 0 1 gt 1 0 no limit March 04 2011 Metafiles Parameter Description Default Enabled Folder ControlSize WriteEnabled WriteEnabledPDF Set to 1 to enable generation of streaming files 0 Streaming file format is developed by Oracle AutoVue to improve performance for subsequent loading of files W
29. n drop down in the installer only lists the languages that are native to the OS If you wish to run the installer in a language that is not displayed in the drop down you can do so by running the installer using the following command line argument avsetup exe 1 lt locale gt where lt locale gt can be EN FR JA DE KO ZH or TW For example avsetup exe l1 JA e Ifyou are performing a network installation of Oracle AutoVue Desktop Version for example accessing Oracle AutoVue Desktop Version over the network you must install the Microsoft Visual C 2008 x86 Redistributable Package on each of the machines accessing Oracle AutoVue over the network http www microsoft com downloads details aspx displaylang en FamilyID 9b2da534 3e03 4391 8a4d 074b9f2bcl1lbf System Requirements e Windows XP 32 bit e Windows Vista 32 bit e The installation requires about 400MB of free space Note The memory requirement is dependent on the size and complexity of files you try to view with AutoVue AutoVue Installation Upgrading AutoVue If you have an older version of Oracle AutoVue installed on your computer you must uninstall it before proceeding with the new installation Before uninstalling your previous version of AutoVue make sure to save a backup copy of any specific settings and content that you would like to push forward into your new version This can include the following e AutoVue settings from the avwin ini file locate
30. obile Pack password protection Syntax Auto VueMobile FileStreamEncryption lt RC4 3DES gt March 04 2011 Copyright 1989 2009 Oracle and or its affiliates All rights reserved Portions of this software Copyright 1996 2007 Glyph amp Cog LLC Portions of this software Copyright Unisearch Ltd Australia Portions of this software are owned by Siemens PLM 1986 2008 All rights reserved This software uses ACIS software by Spatial Technology Inc ACIS Copyright 1994 1999 Spatial Technology Inc All rights reserved Oracle is a registered trademark of Oracle Corporation and or its affiliates Other names may be trademarks of their respective owners This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws Except as expressly permitted in your license agreement or allowed by law you may not use copy reproduce translate broadcast modify license transmit distribute exhibit perform publish or display any part in any form or by any means Reverse engineering disassembly or decompilation of this software unless required by law for interoperability is prohibited The information contained herein is subject to change without notice and is not warranted to be error free If you find any errors please report them to us in writing If this software or related documentation is delivered to the U S
31. odel This will result in improvements in file load performance Set to 1 to enable display of 3D model Option applies to the following PCB formats e Zuken CADSTAR e Cadence Specctra e Altium Designer Protel e OrCAD Layout ODB Mentor BoardStation e IDF e Mentor Expedition e Zuken CADIF e Cadence Allegro Syntax ECAD ECAD_LOAD_3D_PAGE lt 1 0 gt 9A February 28 2011 Options Parameter Description Default GUILOOK 3DPerformancePreference lt 0 1 gt EnableOfficeMarkups DEFAULTFILEUNITS Option supports different look and schemes for 2005 the AutoVue GUI toolbars menus buttons and icons Syntax Options GUILOOK lt 2000 2003 2005 XP gt For example when GUILOOK 2000 the look and feel of AutoVue matches the Windows 2000 theme This option orients the optimization in the 1 product towards speed or memory If set to 1 the optimization is assigned to the speed performance If set to 0 the optimization is assigned to memory usage This option impacts only the loading process of EDA 3D and CATIA 4 CATIA 5 Pro ENGINEER Autodesk Inventor SolidDesigner Mechanical Desktop ACIS IGES and STEP 3D models Enable disable creation of markups for office 0 documents Set to 1 to enable markups for office formats Set to 0 to disable markups for office formats Syntax Options EnableOfficeMarkups lt 0 1 gt Specify the unit to use if native file doe
32. ort for AutoCAD 2010 Added support for MicroStation 8i Added support for DWF 3D Performance improvement for Microstation 8 3D and Microstation 7 3D Added support for hyperlinks associated with WebCGM drawings Enhanced parts display in block lists to match the order and representation of Cocreate drafting Added new INI option ACADDEFAULTSHAPEFONT to allow users to specify default shape font for AutoCAD drawings See New INI File Settings on page 9 Added support for user defined bigfont code page for AutoCAD Bigfont information should be added to BIGFONTCODEPAGES section of acadfont map which is located in lt install folder gt avwin directory Bigfont code page mapping is only needed for AutoCAD versions 2007 and up For more information on mapping refer to the instructions provided in acadfont map Improved support for non English text in AutoCAD Improved display of dimensions in Microstation 8 General bug fixes for e AutoCAD e MicroStation e Cocreate Drafting e Autodesk DWF e CGM e HPGL e Shapefile EDA Formats Added support for Allegro PCB Layouts versions 16 3 16 2 and 16 0 Added support for Allegro Design Entry HDL 16 3 16 2 and 16 0 Added support for Altium Designer versions 6 6 6 7 6 8 and 6 9 Summer 2008 Winter 2009 and Summer 2009 Added support for Zuken Cadstar versions 10 00 and 11 00 Added support for P CAD 2006 Added support for locating external reference files for non archived Allegro projec
33. patternl gt lt pattern2 must be preceded by a description and a number specifying the number gt lt pattern6 gt of patterns for the style Example DGNSTYLEDASHDOT style1 5 1 1 0 1 2 style2 3 2 2 2 In this example two line styles index 1 and index 2 are defined the line styles provided by this parameter replaces the default seven standard styles A line that uses style index that has not been provided is displayed as a solid line for example a line with style3 when only two styles have been defined SolidWorks Options Configure the option for SolidWorks files Options SWSHOWVIEWPORTBORDER Set to 1 to view the border bounding box of 2D views ina SolidWorks 0 drawing Set to 0 so that no border is drawn 16 February 28 2011 AutoVue 19 3 July 20 2008 Packaging e Renamed AutoVue Desktop Edition to AutoVue Desktop Version e Renamed AutoVue Web Edition to AutoVue Web Version e Added support for offline collaboration via the AutoVue Mobile product Refer to AutoVue Mobile on page 18 for more information e Ifyou have a network installation of AutoVue Desktop Version i e accessing AutoVue Desktop Version over the network you must install the Microsoft Visual C 2005 SP1 Redistributable Package on each of the machines accessing Auto Vue over the network http www microsoft com downloads details aspx familyid 200b2fd9 ae1a 4a1 4 984d 389 36f85647 amp displaylang en System Requi
34. r specified in AutoVue is used 1 File colors are ignored and only default colors are used 2 Default colors are used only for elements without file defined colors 3 Default colors are used for elements without file defined colors and to replace color BLACK Enable or disable loading of attributes for IFC 1 files Set to 1 to display all supported entity properties for an IFC file Set to 0 to display only the default entity properties which are Display Mode Name and Visibility Syntax Options IFCREADPROPERTIES lt 1 0 gt IFCLoadInvisibleSpaces Enable or disable loading of internal spaces 1 boundary geometry Set to 1 to enable loading of internal spaces boundary geometry Set to 0 to disable loading of internal spaces boundary geometry Syntax Options IFCLoadInvisibleSpaces lt 1 0 gt IFCWINDOW_TRANSPARE NCY Specify the transparency level for windows in 55 IFC files Value is an integer between 0 no transparency and 100 full transparency Syntax Options IFCWINDOW_TRANSPARENCY 55 28 March 04 2011 Parameter Description Default J2KRESOLUTION Set to HIGH to display with a high resolution This could cause a decrease in performance Other values LOW MEDIUM and DYNAMIC You can also set JEKRESOLUTION values to num or num where num is a number between 1 and 100 Setting the value to num gives the same result as DYNAMIC but increases the re
35. rements e Microsoft Windows 2003 32 bit Windows XP 32 bit or Vista 32 bit e A hard disk with at least 400 MB of hard disk space Note The memory requirement is dependent on the size and complexity of files you try to view with AutoVue Installation If you have an older version of AutoVue installed on your computer we recommend that you uninstall it before proceeding with the new installation Before uninstalling your previous version of AutoVue make sure to save a backup copy of any specific settings and content that you would like to push forward into your new version This can include the following e AutoVue settings from the avwin ini file located in the C windows directory by default e Custom translation tra files located in the avwin directory of your AutoVue installation e Custom markup symbol libraries located in the avwin Symbols directory of your AutoVue installation e Thumbnails Cache if any located in the avwin Folders directory of your AutoVue installation If you decide to move these settings content forward to your new installation of AutoVue they can for the most part be copied to the same relative locations in your new installation However for the AutoVue settings in avwin ini it is best to manually copy the specific settings that you would like to keep as the newer version of AutoVue may have important new settings If you obtained AutoVue from the download site extract the contents of the zip f
36. riant views Set to 1 to disable variant views Set to 0 to enable variant views Note This option currently only supports Cadence Allegro projects IGES Options Configure options for IGES files Options Parameter Description Default IGESLOADDRAFTFIRST Specify whether to display a 2D projection of the 3D model before the full 0 011 3D model has finished loading Set to 0 to wait for the 3D model to finish loading Set to 1 to display the 2D page first before the full 3D model has finished loading IGESLOADSUBFIGURED Specify whether to display subfigure definition entities when subfigure 0 EFINITIONS 011 instances are not found Subfigure definition entities are used to store a group of entities that occur repeatedly in a file subfigure instances Set to 0 so that subfigure definition entities are not found Set to 1 to display subfigure definitions when subfigure instances are not found Note Option is for IGES 3D files apr eee February 28 2011 Oracle AutoVue 20 0 0 Desktop Version Packaging e Oracle AutoVue Desktop Version installer has been updated Instructions for non interactive installation have been updated Refer to the Installation and Administration Manual for updated instructions e AutoVue Installer can be run in one of AutoVue supported languages English EN French FR German DE Japanese JA Simplified Chinese ZH or Traditional Chinese TW However the language selectio
37. rom AutoVue 20 0 0 Customers who work with this format are encouraged to remain with their AutoVue 19 3 x version and not update to 20 0 0 Customers will be notified when support for IGES 3D has been re introduced Removed support for LHA archive format February 28 2011 Features Desupported in AutoVue 20 0 0 e Removed support for the following INI options e USEEXCHANGE e MEIOFORCE19 1MARKUPCOMPATIBILITY e DNGPLOTTERDRIVER e DGNUSEPLOTTERSETTINGS e DGN8LSTYLERSC e PDFDPIRESOLUTION e PDFCACHELEVEL e CATIASSHOWPMIWITHME e CATIASSHOWPMI e FIXPRINTING e In Markup mode it is not possible to anchor a text box to another markup entity e The INI option TRA_NAME that can be used to set the locale for the AutoVue GUI has been disabled A new INI option called GUILOCALE has been created to enable users to specify AutoVue GUI locale See section New INI File Settings on page 9 INI Options Updated in AutoVue 20 0 0 ANTIALIAS e CONTRAST e VISIOPAGEBKCOLOR e 3DPERFORMANCEPREFERENCE e DGN_FAST3D Refer to the Installation and Administration Manual for information regarding these options New INI File Settings General Options Configure options that apply to parameters such as fonts performance and color Options Parameter Description Default CONVERTPDFTHROUGHPRINTI Specifies whether markups should be included as graphical 1 NG lt 0I1 gt elements in the PDF or added as annotations to the PDF Set to 1 to add as grap
38. s not 1 contain units information Syntax Options DEFAULTFILEUNITS lt 1 2 4 5 7 8 9 10 11 12 13 14 15 gt where 1 inches 2 millimeters 4 twips 5 centimeters 7 meters 8 kilometers 9 feet 10 yards 11 miles 12 mils 13 miles 10 14 microns 15 microinches February 28 2011 Parameter Description Default FastPMIRendering lt 0I1 gt ResetRotateandFlip ACAD_PENSETTINGSAFFE CTLINEWIDTH CustomDocFontSubstitution OutlookLinkFlag DownloadWebResources This option affects the rendering of PMI Text If set to 1 the rendering time of the PMI Text is decreased The quality of the small text will be degraded since it is rendered just as box or line made on the contour of the text As a result performance is improved When you zoom in entities will be rendered completely If set to 0 the rendering time remains the same Syntax Options FASTPMIRENDERING lt 0 1 gt This option allows the user to choose rotation and flip settings when viewing files Syntax Options ResetRotateAndFlip lt 0 1 gt 1 render file with no rotation and no flipping If native file itself is rotated or flipped native file settings take precedence and file is rendered with saved rotation flip 0 render file with the rotation and flip settings defined in AutoVue GUI or in AutoVue INI file Option is for AutoCAD drawings When set to 0 pen settings do not affect non zero
39. solution by a factor of num where num is a value from 1 to 100 up to the maximum possible resolution of the image Note that this will decrease performance Setting to num gives the same result as DYNAMIC but decreases the resolution by a factor of num where num is a value from 1 to 100 down to the lowest possible resolution of the image Note that this will increase performance Syntax Options J2KRESOLUTION lt DYNAMIC HIGH MEDIUM LOW num num gt DYNAMIC ProELoadCosmeticWires SWWIRECOLORVISIBLE Set to 0 to turn off display of cosmetic wires Set to 1 to enable display of cosmetic wires Syntax Options ProELoadCosmeticWires lt 0I1 gt Specify color to use for drawing solidworks wireframe models for Solidworks drawings Value should be an integer value specifying the RGB color Syntax Options SWWIRECCOLORVISIBLE 0 0 Black TextBitmapRendering lt 0I1 gt If set to 1 render small text glyphs using bitmaps If set to 0 text is not rendered using bitmaps Note This option may affect most text in PDF TrueType text in ME10 and PostScript text in CATIAS ResLocateDll Set this to the name of the custom resource resolution DLL with which you have defined your own localization callback Syntax Options ResLocateDII ExampleDLL dll empty February 28 2011 Disable Parameter Description Default Layers Blocks Set 1 to disable ShowLayersDia
40. ts DxDesigner Expedition ODB and Mentor BoardStation files There is now no need to specify XRefs path if the resources are located at the base file path Added support for OrCAD Layout and Capture version 16 2 Reintroduced support for GDS IT General bug fixes for e Allegro PCB Layouts e Allegro Design Entity HDL e P CAD e DxDesigner e Expedition e Mentor BoardStation Office Formats Added support for Adobe Acrobat PDF 9 0 Added support for PowerPoint 2007 Added support for text and shape hyperlinks for PowerPoint files Jus February 28 2011 Added support for Smart Art for PowerPoint XML Improved support for Word e Added support for default Asian line spacing e Added support for search copy and paste e Added support for auto numbering Improved chart support for Excel Improved support for PDF transparency and soft masks General bug fixes for e Adobe Acrobat PDF e Powerpoint e Word e Excel e RTF Raster Formats Re introduced support for JEDMICS Archive Formats Added support for TAR and GZIP formats Documentation The following documents have been updated in 20 0 0 Formats Desupported in AutoVue 20 0 0 Installation and Administration Manual User s Manual Acknowledgments Supported File Formats Product Limitations Release Notes VCET API Manual Markup Control API Manual Product Variations Feature Matrix ActiveX Feature Matrix Support for IGES 3D has been removed f
41. ual Acknowledgments Supported File Formats Release Notes Product Variations Feature Matrix 2 February 28 2011 The Product Limitations document prdlim pdf is no longer bundled with AutoVue The list of limitations is available as a KM Note https support us oracle com oip faces secure km DocumentDisplay jspx id 1301144 1 Desupported Features Options e INI options DOCVIEW and DOCVIEWSHOWHEADERS have been desupported in release 20 0 1 INI Options Updated in AutoVue 20 0 1 e Extended the usage of the CODEPAGE option to be used in DXF files e MINMANAGEDIMAGESIZE has been renamed to MINCACHEDIMAGESIZE Refer to the Installation and Administration Manual for information regarding these options 3 February 28 2011 New INI File Settings AutoCAD Options Configure options for AutoCAD files Options Parameter Description Default DISABLE3DMODEL Specifies whether the 3D model should be disabled or not 0 011 Set to 0 to include the 3D model in the design Set to 1 to disable the 3D model As a result it is not included in the design and streaming file size is reduced Note The option is only applicable for DWG release 2000 files and above ECAD Options Configure options for ECAD files ECAD Parameter Description Default ECAD_DISABLE_VARIA Specifies whether to enable or disable variant views This option can be used 0 NTS 011 to improve performance if the project contains multiple va
Download Pdf Manuals
Related Search