"user manual"
Contents
1. TOTEM TOTEM AMUSEMENT CO LTD OTEM AMUSEMENT CO LTD User Manual of Totem Timer Controller V1 1 Function Instruction Refer to the port instruction please connect all loads and lines well Connect to external power LED displays 0000 LS m W Deposit coins LED displays the aggregate value When coins deposited are enough after several seconds or directly press START button output port OUT has current LED displays the total service time and this time will be counted down If press START button for 3 seconds during service port OUT will automatically cut off the remaining time will be deleted to 0 4 When time is up port OUT will automatically cut off If there is balance the balance will automatically be deleted to 0 after 30 seconds gt Programming modes 1 Press SET button to select P1 P7 to program parameters Press SW1 add SW2 reduce to adjust parameters then press SET to next programming Press CLR to exit programming 2 Unit service time programming P1 and P2 2 1 press Set button to select P1 LED displays P1 2 2 press SW1 add SW2 reduce to adjust second 0 59 seconds is avaliable 2 3 press SET enter into minute programming P2 2 3 pressSW1 add SW2 reduce to adjust minute 0 120 minutes is avaliable E G when there is programming 30 in Pland 01 in P2 it means the service time is 1 minute and 30 seconds after get enough amount 3 Muni charge programming P3 3 1 press Set butt2. on to select P3 LED displays P3 3 2 press W1 add SW2 reduce to adjust charge 1 200 is avaliable 3 3 press SET enter to next programming E G When there is programming 010 in P3 it means port OUT will not output current until deposit 10 units of coins at least 4 Aggregate value checking P4 4 1 press Set button to select P4 LED displays P4 4 2 Then LED displays the first 4 digits of amount 2 seconds later it displays the last 4 digits E G When LED displays 0020 then 0500 it means the aggregate value is 200500 units 5 Aggregate value Deleting P5 5 1 press Set button to select P5 LED displays P5 5 2 press SW1 button for 2 seconds then the value will be automatically deleted to 0 ADD 2 F NO 379 Fuhua RD Panyu district 511400 Guangzhou China Tel O086 20 84621887 fax 0086 20 84666478 6 TOTEM TOTEM AMUSEMENT CO LTD OTEM AMUSEMENT CO LTD Delay service time programming P6 6 1 press Set button to select P6 LED displays P6 6 2 press SW1 add SW2 reduce to adjust the service time 0 30 second is avaliable E G When there is programming 05 in P6 it means output port OUT automatically has current 5 seconds later after deposit enough coins when you don t press START button gt 7 limit coins depositing optional the defaulted is 0000 means no limit 7 1 press SET button to select LED displays P7 7 2 press SW1 to select limit LED displays 0001 press SW2 to select no limit LED dis
3. plays 0000 7 3 press CLR button to exit E G When there is programming 0001 in P7 it means after deposit enough coins and the port OUT starts to electrify the coin acceptor will forbid receiving coins When there is programming 0000 in P7 it means after deposit enough coins and the port OUT starts to electrify the coin acceptor will continue receiving coins 8 Recover the defaulted value When standby LED displays 0000 press both SW1 and CLR for 2 seconds It displays PP then will recover the defaulted value Ports instruction INPUT input voltage it s based on the working voltage of loads max AC220V max 10A OUT output voltage max 10A IN ADC connect to INPUT can output voltage to the external transformer OUT ADC supply working voltage to main board Input voltage AC12V or DC12V Input current gt 600mA RES connect to Start button COIN connect to coin acceptor Port COIN receives BYTE signal 2400bps E 8 1 Coin acceptor should be on NC position ADD 2 F NO 379 Fuhua RD Panyu district 511400 Guangzhou China Tel O086 20 84621887 fax 0086 20 84666478
Download Pdf Manuals
Related Search