kl 864 kl 864/001 kl 864/001
Contents
1. The terminal board is on the rear panel of the appliance Open the terminal board cover by obtaining leverage with a screwdriver on the two side fins Loosen the cable gripper screw and allow the cable to pass through it Arrange the conductors so that the earth conductor is the last to detach from its terminal if the cable goes into a state of faulty traction Connect the phase conductor to the terminal marked with the letter L the neutral conductor to the terminal marked with the letter N and the earth conductor to the terminal marked with the symbol Tighten the ring nut of the cable gripper and close the terminal board cover The appliance must be connected to an equipotential system whose efficiency must first be checked according to current legal regulations This connection must be made between different appliances by using the appropriate terminal marked with the symbol The equipotential conductor must have a minimum diameter of 2 5 mm The equipotential terminal is at the rear of the appliance Connection to water mains mod KL 1010 The appliance must be supplied with softened drinking water with a hardness value of 0 5 F to 3 F It is obligatory to use water softener to reduce the formation of scaling inside the proofing chamber The water pressure must be in the range of 100 to 200 kPa 1 0 2 0 bar The connection to the water supply is done using the 3 4 threaded solenoid valve on the back at the bottom of the appli2. Directive 2004 108 EC CEI EN 61000 3 2 CEI EN 61000 3 3 Machine Directive 2006 42 EC Directive on the general safety of products 2001 95 EC Directive on the restriction in the use of dangerous substances in electrical and electronic appliances 2002 95 EC Directive on waste from electrical and electronic appliances 202 96 EC Camposampiero 04 04 2012 Signature of a Representativ of the Board of directors page 3 _ _ TECNOEKA Srl use and instruction manual _ _ page 4 _ Proofer rev 4 Index Technical service MODD KL 823 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 KL 1010_ 2 General warnings 3 Technical specifications 4 Instructions for the installer 5 Use instructions for the user 6 Residual risks for the user 7 How to use the control panel 8 Routine cleaning and maintenance 9 Technical assistance 10 Informations to the consumers 11 Wiring layout 12 The Warranty page5_ _ TECNOEKA Srl use and instruction manual _ 1 Technical service A technical check up once or twice a year helps prolong the life of the appliance and guarantees better operation Make sure that assistance is carried out solely and exclusively by qualified personnel For any spare parts orders or for any information about the appliance always mention the serial number and model data indicated on the technical data plat
3. ance fitting a mechanical filter with a cut off cock before connecting the filter allow a certain amount of water to flow out in order to remove any waste from the pipe page 7 _ _ TECNOEKA Srl use and instruction manual _ 5 Use instructions for the user This appliance is not intended for use by persons including children with reduced phycal sensory or mental capabilities or lack of experience and knowledge Unless they have beengiven supervision or instruction concerning use of appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance For the first use we advise you to run the appliance load free for at least 15 20 minutes In this way any unpleasant smells due to residual work grease are eliminated This appliance must be used solely for the purpose for which it was expressly designed i e heating and leavening frosted foods Do not enter salt or salty food in proofing chamber Salt can irreparably damage the appliance Manufacturer denies any responsibility for damages 6 Residual risks for the user Keep away from the machine personnel not trained to use it The appliance contains electrical parts and must never be washed with a jet of water or steam The appliance is electrically connected before attempting any cleaning operation cut power to the appliance Do not use the door handle to move the appliance the glass panel may b
4. e applied page9_ _ TECNOEKA Srl use and instruction manual _ 11 Wiring layout WIRING LAYOUT MODD KL 822 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 N L m gt R1 16 Kev M Power terminal board L1 Thermostat indicator light IG Power line switch R1 Heating elements T Control thermostat _ page 10 m FzZ _ Proofer _ rev 4 MODD KL 823 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 KL 1010_ WIRING LAYOUT MOD KL 1010 L N M T Q R1 AAA E A S R2 Key Power terminal board S Thermostat indicator light Power line switch R1 R2 Heating elements Control thermostat Humidifier switch Humidifier solenoid valve page 11 _ _ TECNOEKA Srl use and instruction manual _ 12 The Warranty Your appliance is covered by warranty The seller will replace or repair and his decision will be final free of charge for the customer only those parts that are defective due to a manufacturing fault on condition that under penalty of forfeiture for domestic equipment the customer notifies the fault within two months from the date when he she discovered it and anyway within 2 years form the date of purchase for professional equipment the customer notifies the fault within 8 days from the date when he she discovered it and anyway within 12 months from the date of purchase by registered letter wit
5. e at the rear 2 General warnings Very importanti keep this instruction book together with the appliance for future consultation These warnings were drafted for your safety and for that of others Please read them carefully before installing or using the appliance If on receipt of the goods the packaging is damaged write the following on the delivery note REVERSE THE RIGHT TO CONTROL THE GOODS specify the damage and get the driver to sign in acceptance send a claim in writing to the seller within 4 calendar days from the date of receipt No claim shall be accepted after such period The appliance is intended for professional use and must be utilised by qualified personnel trained to use it Any modification which may be necessary on the electrical system to enable installation of the appliance must be carried out solely by competent personnel It is dangerous to modify or attempt to modify the characteristics of this appliance Never clean the appliance with direct water jets because if any water enters it could limit the machine s safety Before doing any maintenance or cleaning jobs disconnect the appliance from the electrical mains and allow it to cool Do not attempt to carry out the periodic controls or any repairs by yourself Contact the nearest Service Centre and use only original spare parts N B Improper or incorrect use and failure to observe the installation instructions shall release th
6. e floor near to where the appliance could be located the vapours released by this acid could corrode and damage the appliance s outer housing in steel 9 Technical assistance Before leaving the factory the appliance was completely regulated and tested by expert specialised personnel to guarantee the best operating results All repairs and settings must be performed with utmost care and attention respecting national safety regulations in force Always contact your retailer or our nearest Service Centre giving details of the problem the appliance model and the serial number on the rating plate on the rear panel For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the cover or going to www tecnoeka com 10 Informations to the consumers Further to Directive 2002 96 EC the symbol of the crossed rubbish skip on the appliance means that at the end of its life the product must be disposed of separately from the other rubbish The user must hand the appliance to a specialised waste collection centre for electric and electronic equipment The separate collection of the rubbish and subsequent treatment recovery and disposal help to produce other equipment using recycled materials reducing the negative effects on the environment and public health which would be caused by incorrect management of the rubbish Should the user dispose of the product abusively administrative sanctions would b
7. e manufacture from all responsibility In this connection the directives in the POSITIONING paragraph must be strictly observed 3 Technical specifications KL 864 Appliance model KL 822 KL 823 KL 833 KL 864 001 KL 898 KL 1010 KL 864 002 Dimensions of appliance mm 600x500x850 680x500x850 680x630x850 815x630x850 920x750x870 970x905x720 LxDxH Weight of appliance K9 25 26 31 40 41 45 Heating power kw 1 2 1 2 1 2 2 4 2 4 2 4 Power supply 50 60 Hz voltage V 230 Appliance class l Power cable 2 diameter 3x1 5 mm Type of cable HO7RN F Electric cable connection Type Y The technical data plate is positioned on the rear panel of the appliance _ page 6 _ Proofer _ rev 4 MODD KL 823 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 KL 1010_ 4 Instructions for the installer The following instructions are aimed at the qualified installer to ensure that he carries out the installation adjustment and maintenance operations as correctly as possible and according to current legal regulations Any operation must be performed with electrical power cut to the appliance Before using the appliance carefully remove the special adhesive film protecting the parts in Stainless steel Do not leave any glue residues on the surfaces If necessary remove them at once with an appropriate solvent Positioning Posit
8. eka USE AND INSTRUCTION MANUAL MODD KL 822 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 KL 1010 rev 4 TECNOEKA S r l Via I Nievo n 12 B 35012 Camposampiero Padova Italy Tel 39 049 9300344 39 049 5791479 Fax 39 049 5794387 www tecnoeka com E mail info tecnoeka com _ TECNOEKA Srl use and instruction manual _ XASgq PRODOTTI Fam 3 CONSERVAZIONE LIEVITATORE LEka MANUALI D USO Lievitatore LEkaWnstruction manual KL822 KL823 KL833 KL864 KL864_001 KL864_002 KL898 KL1010 GB rev 4 doc _ page 2 _ Proofer _ rev 4 MODD KL 823 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 KL 1010_ Prodotti mirati per Ristorazioni Pasticcerie Panetterie e Gastronomie TECNOEKA Srl Via Nievo 12 B 35012 Camposampiero PD Tel 39 049 5791479 39 049 9300344 Fax 39 049 5794387 eKa www tecnoeka com info tecnoeka com CE DECLARATION OF CONFORMITY Annexed document Il A of directive 2006 42 EC Manufacturer TECNOEKA Srl Address Via I Nievo 12 B 35012 Camposampiero Pd Type of product Proofer Model KL 822 KL 823 KL 833 KL 864 KL864 001 KL 864 002 KL 898 KL 1010 TECNOEKA Srl declares that the above mentioned products conform to the safety regulations under CEI EN 60335 1 Low voltage directive 2006 95 EC ISTAT CEI EN 55014 1 Electromagnetic compatibility
9. h acknowledgement of receipt and enclosing the invoice or receipt proving the purchase Apart from the case when the customer cannot produce the invoice or receipt proving the purchase or when the above mentioned terms are not complied with the warranty is expressly excluded in the following cases 1 faults or breakage caused by the transport 2 wrong or incorrect installation of the product for instance because of insufficient draught of the flue or exhausts in light of the instructions given in the user s handbook supplied with the product 3 inadequate or abnormal electrical hydraulic and or gas supplies 4 carelessness negligence or incompetence in using the product in light of the instructions given in the user s handbook supplied with the product 5 use of the product for uses different from the one for which it was built or anyway in a manner not compliant with the instructions given in the user s handbook supplied with the product 6 tampering with the product 7 adjustments and or maintenance and or repairs carried out by unauthorised personnel and or with non original spare parts 8 inadequate or careless maintenance of the product in contrast with the user s handbook supplied with the product 9 damages caused by fire natural disasters and accident as well as by any cause not attributable to TECNOEKA SRL The warranty explicitly excludes varnished or enamelled parts knobs handles movable or removable p
10. ion the appliance perfectly horizontally the feet are adjustable at a distance of not less than 10 cm from the side and rear walls to enable natural ventilating air to circulate freely around it The appliance is not suitable for embedding Electrical connection The appliance must be connected to the electrical mains according to current legal regulations Before making the connection make sure of the following the voltage and frequency values of the power supply system match the values on the technical data plate affixed on the appliance the limiting valve and the system are able to support the appliance s load see the technical data plate the power supply system has an adequate earth connection according to current legal regulations a single pole switch with minimum between contacts aperture of the overvoltage category Ill 4000 V sized to the load and conforming to current legal regulations is fitted between the appliance and the mains in the direct connection to the mains the single pole switch used for connection is easy to reach when the appliance is installed the yellow green earth wire is not interrupted by the switch the power supply when the appliance is operating must not deviate from the rated voltage value by 10 if the supply cable is damaged then it must be replaced by the manufacturer or by your technical support or by a qualified person to avoid any risk Connection of power cable
11. lastic parts bulbs glass parts refractories and any accessories TECNOEKA SRL cannot be held responsible for any damages either direct or indirect caused by the product breaking down or following its non use Any repairs carried out during the warranty do not cause said warranty to be extended or renewed Nobody is authorised to modify the terms and conditions of the warranty or to issue new verbal or written warranties The warranty is valid only for appliances installed in the European Union Any dispute shall be settled by the competent Court in Padua Warning for the Buyer 1 the cooking appliance is designed only for cooking purposes while the heating appliance is designed only for heating domestic environments 2 TECNOEKA S r l does not install the appliances the seller shall be responsible for any installation carried out 3 TECNOEKA S r l cannot be held responsible for any damages either direct or indirect to people pets or property caused by the appliance breaking down or following its non use The Manufacturer cannot be held responsible for any inaccuracies due to misprints or mistakes in copying in this handbook The Manufacturer reserves the right to modify the products as he deems fit also in the interest of the user without affecting the vital characteristics of functionality and safety _ page 12
12. reak 7 How to use the control panel Key to the symbols on the control panel ON OFF switch key To electrically power up the appliance green eye OFF red eve ON Temperature knob To vary the heating temperature for values from 30 C and 50 C Humidifier buttom Mod KL 1010 To produce humidity inside the proofing chamber while the appliance is operating and the chamber is hot Control thermostat indicator light The indicator light of the control thermostat goes OFF whenever the selected temperature is reached in the leavening compartment It lights up again when the thermostat is tripped to re establish this temperature _ page 8 _ Proofer _ rev 4 MODD KL 823 KL 823 KL 833 KL 864 KL 864 001 KL 864 002 KL 898 KL 1010_ 8 Routine cleaning and maintenance WARNING Cut power to the appliance before every operation General cleaning Clean the appliance when it is cool To clean the steel parts do not use products containing chlorine sodium hypochlorite hydrochloric acid etc even if diluted Use specific off the shelf products or a little hot vinegar Rinse thoroughly with water and dry with a soft cloth Clean the glass door with hot water only and do not use rough cloths Do not wash the appliance with direct jets of water because if water enters this could limit the appliance s safety Do not use corrosive substances e g hydrochloric acid to clean th
Download Pdf Manuals
Related Search