Sonic Alert
Contents
1. ra Sonic Alert America s Leader in Visual Alerting Systems Model SBB500SS v3 Sonic Boom Alarm Clock amp Bed Shaker OPERATION INSTRUCTIONS IMPORTANT Please read these instructions carefully before use and retain for future reference See operating instructions on back Use only the supplied or recomended Sonic Alert adaptor to connect the unit Warning To prevent fire or shock hazard do not expose this appliance to rain or moisture Before connecting to mains power make sure that the requirements specified on the apparatus corresponds to the available power BA in that country i e AC100 240V 56 60 Hz The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloth curtains etc No naked flame sources such as lighted candles should be placed on the apparatus It shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Do not place the product in closed bookcases or racks without proper ventilation Where the mains power plug is used as the disconnect device the disconnect device shall remain readily operable MODEL SBB500ss v3 OPERATION INSTRUCTIONS Features 1 Alarm 1 Indicator 9 Fast Min Hour Button 2 PM Indicator 12 or 24 Hour 3 Snooze button Selector Snooze Time 10 Slow Min Hour Adjustment Dimmer Button Control 11 Battery Compartme2. indicator AL1 1 will light up 2 To enable Alarm 2 slide the ALARM MODE SWITCH 12 to AL2 position the alarm indicator AL2 17 will light up 3 To enable both alarms slide the ALARM SELECTOR 1 to AL2 position the alarm indicators AL1 1 and AL2 17 will light up To Select Wake up mode To select the wake up mode slide the Alarm Mode Switch 8 to your desired position a BUZZ for sound b VIB for bed shaker c VIB BUZZ for both sound and bed shaker NOTE once the wake up mode is chosen this will apply to both alarms Alarm Patterns When the alarm is activated alarm pattern of the buzzer flashing display will be out of sync with the vibrator This means that when the buzzer flashing display is ON the vibrator will be OFF and while the buzzer flashing display is OFF the vibrator will be ON ALARM 1 When Alarm 1 is activate it will have 3 beeps for buzzer then the vibrator This pattern is repeated until the alarm is stopped ALARM 2 When Alarm 2 is activate it will have 4 beeps for buzzer then the vibrator This pattern is repeated until the alarm is stopped Adjusting The Alarm Duration Time The default alarm duration time setting is 30 minutes you may adjust the alarm duration between 1 minute and 59 minutes as desired To adjust the alarm duration e Press and hold the AL SET button 5 for six seconds The clock display will show the default ala
3. duct WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE The normal function of the product may be disturbed by Strong Electro Magnetic Interference If so simply reset the product to resume normal operation by following the instruction manual In case the function could not resume please use the product in other location Attention should be drawn to the environmental aspects of battery disposal wa this indicating separate collection for electrical and electroinc equipment SONIC ALERT S 1 YEAR LIMITED WARRANTY The Sonic Boom Alarm Clock Model SBB500ss is warranted against manufacturing defects in materials and workmanship for one 1 year from the date of purchase Within this period Sonic Alert will repair or replace at our option the SBB500ss without charge for parts and labor Simply contact our customer service department to obtain an RA return authorization number and instructions on how to process your product for return Call 1 888 864 2446 or e mail to RMA sonicalert info You ll need a copy of your receipt to process the return authorization Sonic Alert Inc Troy MI 48083 USA Sonic Alert Made in China Sonic Alert Troy MI 48083 www SonicAlert com 1 888 864 2446
4. e desired time The lighted dot 2 located in upper left corner of the clock display indicates the time is PM For AM time this dot will not light up Setting the Alarm Time Setting Alarm 1 1 2 3 Slide the ALARM MODE SWITCH 12 to AL1 position the alarm indicator AL1 1 will light up Press and hold the ALARM SET 5 button and at the same time press the FAST Button 9 or the SLOW button 10 to advance clock display until you reach desired alarm setting Make sure alarm time is correctly set for AM or PM 1 Setting Alarm 2 4 Once alarm AL1 has been set slide ALARM MODE SWITCH 12 to AL2 position the alarm indicator AL2 17 will light up 5 Press and hold the ALARM SET 5 button and at the same time press the FAST Button 9 or the SLOW button 10 to advance clock display until you reach desired alarm setting Selecting 12 or 24 hours format Clock is set to 12 hour as the default setting Press and hold the Fast Button 9 for 6 seconds to enter the hour selection mode release the Fast Button 9 when the display shows 12 H or 24 H Press and release the hour button to toggle between 12 or 24 hours If no selection is made within 4 seconds then the last displayed hour format will be chosen and the display will return to the normal Time mode Alarm Enable Alarms 1 To enable Alarm 1 slide the ALARM MODE SWITCH 12 to AL1 position the alarm
5. nt 4 Volume Wheel 12 Alarm Mode Switch 5 Alarm Set Alarm 13 DC Adaptor Input Duration Adjustment 14 Tone Control Wheel 6 Time Set Button 15 Vibrator Output 7 Alarm Off Button 16 Flashing Light Display 8 Alarm Function Switch 17 Alarm 2 Indicator Test Mode 1 2 3 4 5 Press and hold the Snooze and Time buttons for 3 seconds to enter the Test Mode The display will show 7ES7 to indicate it is in TEST Mode lf within 1 minute no button is pressed then it will exit the Test Mode and return back to the Time Mode Press any button within 1 minute except the Snooze amp Time buttons which has no effect it will exit the Test Mode immediately While in Test Mode sliding the Function Switch will demonstrate the different functions of the clock a Function Switch at OFF it will have a continuous Vee sound to indicate it is in the Test Mode b Function Switch at BUZZ it will demonstrate the buzzer sound c Function Switch at VIB it will demonstrate the vibrator d Function Switch at VIB amp BUZZ it will demonstrate the buzzer sound amp the vibrator After finish with the Test Mode press any button except the Snooze amp Time buttons which has no effect it will exit the Test Mode immediately Setting the Correct Time 1 2 Press and hold the TIME Button 6 and at the same time press the FAST Button 9 or the SLOW button 10 to advance clock display unil you hav
6. rm duration as 30 Release the AL set button e Press the MIN button 10 to adjust the alarm duration to the desired setting from 1 minute to 59 minutes e When the display is showing the desired alarm duration time it will return to the normal clock mode after 3 seconds The new alarm duration time setting becomes the new default and remains in the memory until you change it again Snooze Operation 1 When the alarm turns on in the morning you may press the SNOOZE Button 8 to stop the alarm temporarily The alarm will shut off for 9 minutes or for the predetermined time you select from 1 30 minutes and then turn on again The snooze operation may be repeated indefinitely until the alarm is turned off 2 The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other Adjusting The Snooze Time The default snooze time setting is 9 minutes but you may adjust the snooze time between 1 minute and 30 minutes as desired To adjust the snooze time e Press and hold the SNOOZE Button 8 for four seconds The clock display will show the default snooze time 9 Release the snooze button e Press the SLOW Button 7 to adjust the snooze time to the desired setting from 1 minute to 30 minutes e When the display is showing the desired snooze time it will return to the normal clock mode after 3 seconds The new snooze time setting becomes the new default and remains in the memory until you change it again Sh
7. tery in the back of the clock located under the Battery Compartment Cover 11 The battery needs to be purchased separately Note the LED display will not show during power failure but the clock will still be running and keeping proper time until the power comes back During a power failure the alkaline battery can only keep the clock IC running for up to 30 days During a Power failure the LED display will not show the time NOTE For the best results it is recommended that the battery be changed every 6 months If the clock is not used for a while it is recommended to remove the battery to avoid damage to the clock from battery leakage DC 9V Power Input Attach the DC POWER INPUT 13 to the back of DC9V IN next to VIBRATOR INPUT 15 it is the smaller input of the two NOTE IMPORTANT do not confuse DC POWER INPUT 13 with the VIBRATOR INPUT 15 GENERAL DATA UL listed Power Adaptor AC100 240V 50 60Hz Power Consumption Adaptor Output DC9OVl 650mA CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE THE COVER OR BACK FROM THE PRODUCT NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO YOUR The Lightening flash and arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product SONIC ALERT DEALER The exclamation mark within the triangle is a warning sign alerting you of important instructions accompanying the pro
8. utting Off the Alarm Alarm can be shut off temporary for the day or permanently shut off 1 When alarm goes off press the ALARM OFF 7 button to turn off for the day and come back on at the same time the next day if alarm settings have not changed 2 To shut the alarm off permanently slide the Alarm Function Switch 8 down to the OFF position The alarm will not come on until the Alarm Function Switch 8 is set to VIB BUZZ VIB or BUZZ position NOTE The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other Dimmer Operation There is a 5 level brightness control for the LED display Press the SNOOZE button once to change the display brightness The brightness will cycle from 5 4 3 2 1 2 3 4 5 from bright to dim then from dim to bright NOTE The dimmer function will not work when the clock is in snooze mode Volume Control 1 To adjust the volume rotate VOLUME wheel 4 located on the lower right corner of the clock Tone Control 1 To adjust the TONE turn the TONE wheel 14 located on the top right corner of the clock Bed Shaker Vibrator 1 Attach the bed shaker jack to the back of clock at VIBRATOR INPUT 15 2 To turn on vibrator slide Alarm Function Switch 8 to VIB BUZZ or VIB position 3 Place vibrator between mattress and box spring Battery Backup To use the battery backup you can install a 9 volt alkaline bat
Download Pdf Manuals
Related Search