English - Visual Tools
Contents
1. Take into account that you will see the dome appear on the screen several seconds after its activation due to the latency of communications 5 2 Digital input screen The Input List screen shows the digital inputs current status in the connected VS unit This is an informative screen and it doesn t allow operation of the digital inputs Pom Inputs list O Entrada 6 Entrada 7 Entrada 8 Each digital input appears with a status icon activated red deactivated green following of its name Some mobiles depending on the screen will not show the complete digital input list you can browse the list with the mobile cursors User manual 12 5 3 Digital output screen The Output list displays the current digital outputs status in the connected VS unit Pom Outputs list Alerta HD Each digital output is shown by an icon displaying the current status and its name When the output is activated the icon appears in red when it is deactivated it appears in green The manual outputs are displayed without square brackets and their status can be changed activate deactivate To make these changes open the menu and select the desired option The outputs with their name between square brackets are automatic and only shows their status These can t be operated if you try to operate them the application will show an error message This digital output is not manual lf ts is bracketed the output cann2. This results in very irregular image display with frequent frozen images and very poor motion rendition Unfortunately nothing can be done to improve the application in these areas One must wait until the mobile phone service provider improves the situation or switch to a different service provider User manual 16 VS PHONE ENGLISH Installation and quide DOCPHONEVSOOUMEN_090909v1 3
3. Settings Security Certif Management or the equivalent menu in your device and specify Application Installation Yes Additionally certain phones e g Nokia 6630 require you to enable the on line verification of certificates This can be configured in the Application Manager Download Applications On Line Verification of Certificates Enable Problems during operation The most common causes of error that stop the PhoneVSPlus application from working properly are related to difficulties with the Internet communication of the mobile phone Especially e Internet Access Point PhoneVSPlus is a streaming application This means that it must receive a continuous data stream and display its contents while receiving additional data Many Internet Access Points of mobile phone operators allow only a request response type of protocol i e connection is open full data stream is received and connection is closed afterwards This is a typical behaviour of the WAP access points In order to work properly PhoneVSPlus requires an access point allowing continuous data streaming This is usually the same access point used for receiving mail in the mobile phone e Poor performance in certain areas There are areas in which the data access through the mobile phone works very poorly in particular in 3G communication The mobile phone can indicate the presence of a proper 3G signal but the mobile phone does not get regular access to data communication
4. ask for authorization to connect to internet with a message similar to this one Do you want to allow PhoneVSPlus application to send and receive data To allow the PhoneVSPlus application to proceed you should answer Yes The mobile phone will ask to select an access point You must select the Internet Access Point Do not select the WAP access point or access through a content supplier because the application will not work User manual The latency is very important when connecting to a VS video server A 3G connection offers less latency than a GPRS connection Another significant point for the connection is the current mobile phone coverage which will affect directly the connection speed There are two points that are affected by the latency and the coverage The first one is the image reception speed and the second one is the preset change in a dome camera The PhoneVSPlus application consists of four screens Live Video Digital Inputs Digital Outputs and Information When connecting to a VS unit live video screen is shown by default To change to a different screen open the menu and select the screen you wanted to see Entrada 3 Entrada 4 Entrada 5 Entrada 6 Entrada 7 Entrada 8 5 List Servers The data of each screen can be updated through the option Update To end the connection press the menu option List Servers User manual 10 5 1 Live video screen It may take several seconds un
5. PHONE VS Installation and User s guide ENGLISH INDICE oh ORN N O INTRODUCTION EA AAi 1 INSTALLATION AND SET UP 22 Saa aaa Sara SE a daS Eaa a da 2 REGISTERING THE APPLICATION 2 222 dodsteasasdcsananutebessassatecsdededecnswassanscuueucsausvanate 4 CONNECTION CONFIGURATION sisccstecesscataaneascivaraessucivadantuceuesataancaccisaeasesdeivadantveeeasateeedsocautvaaiceivdecs 6 CONNECTION EENE EA 9 S EVE VIDEO SCREEN cle 11 52 DIOTALINPUT 12 5 9 DIGITAL OUTPUT SCREEN ae 13 5 4 INFORMATION SCREEN niei R E a 14 ERROR MESSAGES sie EAN 15 TROUBLESHOOTING 2 16 Tall PROBLEMS DURINGINSTALLA TION 16 7 27 PROBLEMS DURING OPERATION alee 16 1 Introduction PhoneVSPlus is an application for mobile phones that allows the connection to VS units range with an Internet connection Through a simple interface you can connect to the VS units that you desire and see live video get information about digital inputs and outputs and check the hard disk status the recordings and the custody key Phone
6. VSPlus is an application protected by a software licence Each PhoneVSPlus needs a licence number that will be provided by the distributor There is a 30 days trial period during which you can test the application in your mobile phone without licence User manual 1 2 Installation and set up The main requirement for the application installation is that the mobile phone has Java J2ME with profile MIDP 2 0 and configuration CLDC 1 0 and it must be NOKIA To check if your mobile phone has this feature please consult the phone manufacturer The application has been tested in several NOKIA models For further information about the models please consult the note PhoneVSPlus mobile phone models available in our web page To install the application follow these steps 1 Start the web browser application from your mobile phone 2 Select in navigation options delete cache Once deleted select the option go to a Web address or go to a URL Write the following web address http ohonevs dnsvideo net app and select the PhoneVSPlus 1 2 application that is on the web page 4 Once selected you will be asked to allow the application installation in your mobile phone Accept the application will be installed in the usual place in which new applications are installed on your phone this varies from one phone to another Once the installation has ended it will appear this icon in your mobile phone Depend
7. ce available When the free Space is fewer than 5 the text Total appears in orange e Recording it shows the date and time of the first and the last recording of the connected VS unit This is the way to estimate how long the unit has been working User manual 14 6 Error messages When there is a problem the application shows an error message that will appear in the screen as follows Connection Error List Servers The following list indicates the most common errors and its probable causes e Video Server not found This error is caused by a wrong IP address specification for the video server unit Check if the IP address is correct by connecting to it from a web browser in a PC or using the phone web server You will not be able to see the login page of the VS unit but you will be able to verify the connection e Nota Video Server This error usually indicates that we are connecting to Web server that is not a VS unit or that the specified port is wrong Make sure that you have specified the right port in the right format IP_address port e Authorization Failure This error is usually caused by an incorrect password Make sure that you specify the correct user and the right password in the Edit Server screen e No video received This message could be caused by an error in the remote VS server that is not providing a proper video stream Image Error This message indicates an unexpected error in the
8. ing on each model this icon will appear in the menu in the application folder etc Select it to start the application There will appear a window showing the application name and version PhoneVSPlus 1 3 2006 The application starts for the first time in test mode from this moment there are 30 to register As long as it is not registered this screen will appear showing the days remaining for the activation If the application is not activated in this period it will stop working User manual 2 Trial version Days 30 Use the test period to be sure that the application works properly in your mobile phone before deciding to purchase To start the application click on the menu option Two options will appear e Register allows the registration of the application through an activation licence e Continue allows the use of the application during the test period Trial version Days lett 30 1 Gist User manual 3 3 Registering application To register the application you must get a licence that will be provided by the distributor The licence includes an activation number that is necessary for the registration process Start the application and select in the status screen the Register option A new window will be displayed to introduce the activation number A message will appear asking for permission to connect to the network You must grant permission to the application and then you
9. ld be completed are the following e Name VS unit name IP Port DNS or IP address and connection port Ei dvr videmo net 82 port can be omitted if the standard port 80 Userld Select one of the three provided levels Password This is the password that corresponds to the user level selected before If the standard password hasn t been modified you do not have to type it Otherwise introduce the new password taking into account that the application is case sensitive After completing the video server data open the menu and select the option to store the information To discard the changes select the Cancel option Fal te Edit Server Data Hame IP port dvr viderno net oA Userld operator Supervisor administrator Password When the data has been introduced and validated the server list screen will appear like that In mobile phones like NOKIA N95 the DNS address doesn t work so they use an IP address User manual 7 PPh erver List empty empty empty empty empty empty You can repeat the previous process up to eight different units To delete the data of a VS server just delete the IP port field User manual 8 To connect to a VS unit in the list first select it then open the menu and choose the option Connection alll 1 When the option Connection is selected the phone will
10. must select the Internet access point The following screen will appear showing a waiting message while the on line registration process is taking place Status Registering Application Wait Exit Menu User manual 4 After a few seconds the screen will show the result of the registration process by displaying one of these messages Registration successful Registration failure If the registration is successful you can start enjoying your application with no limit If the registration fails please contact technical support to identify the reasons for failure While the problem is solved you can still use the application during the rest of the trial period lf you need to change your phone you should register the new one with the same PhoneVSPlus licence Please contact your distributor to carry out the corresponding licence change User manual 5 4 Connection configuration Once the installation has finished the first screen is Server List The unit names that PhoneVSPlus can connect with appear here Initially the list of accessible VS devices has eight empty slots To introduce the units data open the menu and select the option Edit Server F alll 2 aA There will appear the Edit Server Data screen where the video server connection data can be introduced Userld operator Supervisor administrator Password User manual 6 The data field that shou
11. ot be operated To change the window open the menu and select the desired option User manual 13 5 4 Information screen The information screen shows the name of the VS unit connected at present its date and local time and the status of the custody key hard disk and recording S416L visual Tools 1071 2007 00 00 13 42 e Name date and time current name date and time of connected VS unit appears at the top of the screen e Custody key this shows when the unit has the custody key locked or unlocked If it s locked the text appears in red e Disk status this shows the status of the disk Depending on the significance of the status the text will change its colour When the status Is critical the text appears in red a dangerous status in orange and a normal status in black From highest to lowest seriousness these are the possible status o Unknown start up disk status the information from the VS unit has been not received yet o Not installed the units hasn t disk RAM memory unit o All fails All the disk fails o Unknown disk the disk does not come from the manufacturer o Atleast one fails some of the disks have failed but at least one works o Maintenance some of the disks need maintenance o Old format the hard disk has an old partitioning it must be formatted to be updated o Ok working ok Total it shows all the disk space in Mb and the free spa
12. process of receiving an image from a VS server It can be caused by abnormal behaviour of the VS server or instabilities in the communication network e Connection Error This message usually signals a problem when opening a connection to a VS server This situation takes place the first time a VS server is selected or when a new camera is requested e Register Error This message indicates communication problems with the license server when registering the application connection is lost Is possible a change in the VS configuration has been made Please connect again When the PhoneVSPlus is connected to a VS unit and it changes the configuration the connection is lost and it should be restarted User manual 15 7 Trouble shooting 7 1 7 2 The two main areas of trouble shooting are related to problems during installation and problems during operation Problems during installation Authentication PhoneVSPlus 1 2 is a certified application This means that it will not install in mobile phones not having the right security certificate i e a VeriSign class 3 certificate Furthermore the certificate must be configured to allow for installation of new applications signed with a certificate rooted in the VeriSign certificate Many mobile phones have more than one VeriSign certificate To enable proper installation you have to ensure that the VersiSign certificates allow the installation of new applications go to
13. til the live video screen shows information depending on the connection type and the latency At the top of the image it appears the connected VS unit name at the bottom on the left side is displayed the camera name and on the right side both the camera number and the number of received images since the application started are shown When the camera Is a dome it is indicated through a text that appears at bottom centre The camera name can have several colours indicating its status Repose Camara verde Recording Camarai rojo Signal fails Camara amarillo Not installed 1 gris The letter before the camera number shows the visualization mode C indicates camera mode Example C1 indicates that the images are from camera 1 T indicates tour mode In this mode an automatic tour is made through all the cameras of the connected VS unit To select a camera use the menu option List Cameras that over lays on the live video screen a list of cameras and their status or just type the camera number on the mobile keyboard To select cameras from 10 to 16 first type an asterisk followed by the camera number To select the tour mode press cero 0 When a camera 15 a dome the application can select the first 10 presets Once the dome 15 selected to go to a preset press the hash key and then the preset number To select the preset 10 press 0 User manual 11
Download Pdf Manuals
Related Search