USER MANUAL ET16C2E
Contents
1. e means it is in recording status You can use desktop shortcut menu or click main menu gt recording set to enter the recording control interface Schedule Record according to the configuration Manual Click the All button and the corresponding channel starts recording no matter the channel in any state Stop Click the Stop button and the corresponding channel stops recording no matter the channel in any state 3 5 4 Alarm output Please check current channel status o means it is not in alarming status e means it is in alarming status You can use desktop shortcut menu or click Main menu gt alarm output to enter the alarm output interface Configuration Alarm is on according to the configuration Manual Click the All button and the corresponding channel is alarming no matter the channel in any state Stop Click the Stop button and the corresponding channel stops alarming no matter the channel in any state 14 Digital Video Recorder User Manual 3 5 5 PTZ control Operation interface is as follows The functions include PTZ direction control step zoom focus iris setup operation tour between spots trial tour boundary scan assistant switch light switch level rotation and so on Note Decoder A B line connects with DVR A B line The connection is right 2 Click main menu system configuration PTZ setup to set the PTZ parameters 3 The PTZ functions are decided by2. 4 3 Alarm Function Alarm functions include motion detect video loss alarm input and alarm output 4 3 1 Motion Detect When system detects the motion signal that reaches the set sensitivity the motion detect alarm is on and the linkage function is turned on PTZ Activation CAM 1 None CAM 2 None CAM 3 None CAM A Ni CAM 5 None CAM 6 None CAM 7 None CAM 8 None o Cancer Picture 4 4 motion detect Picture 4 5 set the area Picture 4 6 set the time section Picture 4 7 PTZ Activation Channel number Choose the set motion detect channel Enable Means that the motions detect function is on Sensitivity Choose in the six options according to the sensitivity Area Click setup and enter the set area The area is divided into PAL22X18 Green block means the current cursor area Yellow block means the dynamic detect defensive area Black block means the unfenced area You can set the area as followed Drag the mouse and draw the area Period Trigger the motion detect signal in the set time section You can set according to week or set uniformly Each day is divided into four time sections Means the set valid Interval Only one alarm signal is turned on even there are several motion detect signals in the set interval 24 Digital Video Recorder User Manual Alarm output Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on Delay Delay a few moments and stop when
3. Enable Select it to make sure abnormal function workable Show message Automatically alarm cue dialog box come out of the main screen Buzzer In built buzzer will ring when alarm occurs 4 4 System setup Set the system parameters such as general setup code setup network setup network service output mode PTZ control serial port setup and alternate patrol setup 4 4 1 General setup System time Set system data and time Data format Choose the data format YMD MDY DMY Date separator Choose list AMan Menu gt System gt General separator of the data format System Time 2012 03 29 14 11 12 Date Format DST A en Lk Date Separator Time Format 24 HOUR Enable Day of Week O Date Start Jan 7 1st Mon 01 01 End Jan v 1st Mon 7 01 01 Enable Day of Week Date Start 812012 01 01 01 01 End POPE anguage ENGLISH gt HDD Fu Overwrite M DVR 0 OR Cancel Picture 4 11 regular setup Picture 4 12 week setup Picture 4 13 date setup 26 Digital Video Recorder User Manual Time format Choose time format 24 hour or 12 hour Language English or Chinese Hard disk full Choose stop Stop recording when the hard disk is full Choose cover Cover the earliest recording files and continue recording when the hard disk is full DVR Number Only when the address button in the remote controller and the corresponding DVR
4. In the input blank write the preset point number then click Preset button PTZ turns to the corresponding preset point x ENT SS x Ae kb em re vong Geh PTZ Config 0 Function Preset 0 Function Pattern Preset Tour Function nterval Tour erva Preset interval Pattern Border Dune anama Patrol No atrol No Da Pattern Patrol No Border Border Begin Page Switch Picture 3 10 Preset Settings Picture 3 11 PTZ Control Picture 3 12 Tour between point settings Picture 3 13 Scan Setup 2 Tour between Points Multiple preset points connected tour line call tour points the PTZ run around on the line 1 Tour between points settings Tour line is connected by multiple preset points setting procedure is as follows Step 1 In picture 3 10 the Direction key will turn PTZ to designated location click Set button to enter Picture 3 13 Step 2 Click Tour button then write proper values in the Preset box then click Add preset button and complete settings also can add or delete tour which has been set up Step 3 Repeat step 1 and step 2 until all the points in the preset designated tour is set Del Preset Please input preset value in the box click Del Preset button to remove the preset points Del Tour Input the number of tour line click Del Tour button to remove the tour lines set 2 The Calls of Tour between Points In picture 3 10 click Page Switch button enter PTZ control menu
5. and Guest permissions are preview and video playback User admin and guest passwords can be revised while their permissions can t be revised 10 Digital Video Recorder User Manual Password protection If the password is continuous wrong three times the alarm will start If the password is continuous wrong five times the account will be locked The account can be unlocked through reboot or after half an hour the account will be unlocked automatically For your system security please modify your password after first login User Name L Password Please Login ORT Cancer Picture 3 1 Login 3 4 Preview You can right click mouse to choose to switch between the windows The system date time and channel name are shown in each viewing window The surveillance video and the alarm status are shown in each window 3 5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu The menu includes main menu video playback video control alarm output PTZ control color setup TV adjust shut down system window switch 3 5 1 Main menu When you login the system main menu is shown as below Requred Remaining 0 00 KA 1 91 GI wmd Picture 3 2 Main menu Picture 3 3 video playback Picture 3 4 detect the storage Picture 3 5 Recording backup 11 Digital Video Recorder User Manual 3 5 2 Video playback There are two methods for you to play the video files in the
6. brightness contrast saturation You can set different parameters at different time sections 3 5 7 TV adjust Adjust TV output area parameters You can use the desktop shortcut menu or enter main menu gt management tools TV adjust 18 Digital Video Recorder User Manual Output Adjust Top Deflate Bottom Deflate Left Deflate Right Deflate Black vertical Black horizontal Picf re 3 18 TV adjust Picture 3 19 shut down the system 3 5 8 Logout Logout shut down the system or reboot up You can use the desktop shortcut menu or enter main menu logout Quit the menu Offer password next entrance shut down Quit the password Turn off the power supply When press the shutdown button there is schedule hint After three seconds the system is shut down Cancel midway is of no effect reboot Quit the system Reboot up the system 3 5 9 Window switch Preview in single window four windows eight windows nine windows according to the choice 19 4 Main Menu 4 1 Main menu navigation Digital Video Recorder User Manual Main Menu Sub Menu Function Setup Set the recording configuration recording type recording time section Recording Playback Set recording look up recording play video file storage Backup Detect or format backup equipment back the selective files l l Set motion detect alarm channel sensitivity area linkage parameters Motion detection defendi
7. data management alarm affair recording operation user management file management and so on Set the time section to look up and click the look up button The log information will display as a list one page is 128 items Press Page up or Page down button to look up and press delete button to clear all the log information 4 6 4 Edition information Display the basic information such as hardware information software edition issue data and so on 4 7 Shut down system Refer to chapter 3 5 8 35 Digital Video Recorder User Manual 5 FAQs and Maintenance 5 1 FAQs If the problems are not listed please contact the local service or call the HQ service We are willing to offer the service 1 The DVR cannot boot up normally Possible reasons are as followed e The power supply is not correct e Switch power supply line is not in good connection e Switch power supply is damaged e The program uploading is wrong e The hard disk is damaged or the hard disk lines are broken e The front panel is damaged e The main board of the DVR is damaged 2 The DVR reboots automatically or stops working after boot up a few minutes Possible reasons are as followed e The input voltage is not stable or too low e The hard disk is damaged or the hard disk lines are broken e The power of the switch power supply is low e Frontal video signal is not stable e Bad heat radiator or too much dust or bad running circumstances for the DVR e
8. 00 Function Pattern i Direct Aux Ope Interval 3 Light O CD Patrol No 4 hemm v d HS 1 Open Close Aux Num Ope eo oS Zs gle 2 Picture 3 14 Boundary Scan Setup Picture 3 15 Auxiliary Function Control Picture 3 16 PTZ menu settings Picture 3 17 Image colour 17 Digital Video Recorder User Manual 5 Horizontal Rotating Click Horizontally rotating button PTZ begins to rotate horizontally relative to original position of the camera Click Stop button to stop 6 Rotate Click on the Horizontal rotating button PTZ turns around 7 Reset PTZ restart all the data clears to 0 8 Page Switch In picture 3 12 click Page Switch button to enter into picture 3 16 setting auxiliary function Enter Auxiliary number corresponding to auxiliary switch on the decoder Auxiliary Number The operation of corresponding auxiliary switch according to PTZ agreement Page Switch In picture 3 16 click Page Switch button to enter the Picture 3 17 PTZ Main Menu the menu itself can be controlled by the Menu control buttons Enter Menu Enter PTZ menu Exit Menu Exit PTZ menu Direction Button The function buttons to choose PTZ menu Confirm Cancel To choose PTZ menu 3 5 6 Color Settings Set the selective image parameters current channel for single window display and cursor place for multi window display You can use the desktop shortcut menu and enter the interface The image parameters include tonality
9. The SATA port of main board is damaged 3 System cannot detect hard disk Possible reasons are as followed e The hard disk power supply line is not connected e The cables of the hard disk are damaged e The hard disk is damaged e The SATA port of main board is damaged 4 There are no video outputs in single channel or multiple channels and all channels Possible reasons are as followed The program is not matched Please update the program e The image brightness is all 0 Please resume the default setup 36 e There is no video input signal or the signal is too weak e The channel protection or the screen protection is set e The hardware of the DVR is damaged 5 Real time image problems such as the image color or the brightness distortion Possible reasons are as followed Digital Video Recorder User Manual e When using the BNC output the option between the N mode or PAL mode is wrong and the image becomes black and white e The DVR is not matched the monitor impedance e The video transmission distance is too far or the loss of the video transmission line is too large e The color and brightness setting of the DVR is wrong 6 Icannot find the video files in local playback mode Possible reasons are as followed e The data line of the hard disk is damaged e The hard disk is damaged e Update the different program with the origin program files e The recording is not on 7 The local video is not clear Po
10. as shown in picture 3 12 Please input the number of tour in the box then click Tour amp PTZ begins to work on the tour line 3 Pattern PTZ also can work on the preset scan line repeatedly 16 Digital Video Recorder User Manual Pattern setup Step 1 In picture 3 10 click Set button enter picture 3 14 Step 2 Click Pattern button then enter proper values in the scan box Step 3 Click Begin button enter picture 3 10 here you can set the following terms Zoom Focus Iris Direction and soon click Set button to go back picture 3 14 Step 4 Click End button to complete setup Click right button of the mouse to exit 2 Pattern Calls In picture 3 10 click Page Switch button then enter PTZ control menu as shown in picture 3 12 Please enter the number of the scan in the value box then click AutoScan button PTZ begins to work on the scan line 4 Border Scan 1 Boundary Scan Setup Step 1 In picture 3 10 click Direction button to turn the PTZ to preset direction then click Set button to enter Picture 3 15 select Border button then left and return to picture 3 10 Step 2 Please click direction arrows to adjust PTZ direction click Set button to enter Picture 3 15 Select Border then right and return to picture 2 10 Step 3 You have thus completed the setup of position of left and right boundary BT Conia Ge SE E eg ee Eck PTZ Config PTZ Control 06 PTZ Control 07 lor Setting 05 00
11. char string is valid Note The user who possesses the user control purview can modify his her own or other user password Once the group is chosen the user purview is the subclass of the group We recommend that the common user s purview is lower than the advanced user Add group Add user group and set the purview There are different criteria shut down the equipment real time surveillance playback recording setup video file backup and so on Add Group Delete Group GROUP admin M Name jadmin CH E Channel Title Memo administrator group heduie El bi x ua ccount uery System Info uery Log info Clear Log System Update Auto Maintain General Config 1n oor o e Me 37 2 3 4 6 H 9 KE IDs Dopo Dopo Ds Ds Do Po T lud 5 r4 b Picture 4 31 add group Picture 4 32 Delete group Delete user Delete the current user Choose the user and click delete user button Delete group Delete the current group Choose the group click the Delete group button 4 5 3 Online user Look up the network user information in the local DVR You can choose the network user and cut the connection Then the user is locked until next boot strap 4 5 4 TV adjust Refer to chapter 3 2 7 33 Digital Video Recorder User Manual MM 4 Wain Hen inte 267 Tic Main Menu gt Advanced gt Upgrade eege Upgrade Position M Upgrade file Pict
12. l Tour Set tour mode and interval time configuration Hard disk Set appointed hard disk as read write disc read only disc or redundant disc Management tools management clear data resume date and so on User Modify user group or password Add user or group Delete user or group management Break the connection with the already logged in user Lock the account after Online user break until booting up again TV adjust Adjust TV upside downside nearside starboard distance Automatic Set automatic reboot system and automatic deleting files maintenance Resume setup state common setup code setup recording setup alarm setup Resume default network setup network service preview playback serial port setup user p p play p p management 21 Digital Video Recorder User Manual System information Hard disk information Display hard disk capability and recording time Code stream Display code stream information statistics Logs Clear all log information according to the log video and time Version Display edition information Shutdown Log out shut down or reboot 4 2 Recording function 4 2 1 Recording Configuration Set the recording parameters in the surveillance channel The system is set for 24 hours consecutive recording in the first startup You can enter Main menu Recording function Recording setup to set Note There is at least one read write hard disk refer
13. number is matched the remote operation valid Video format PAL or NTSC 4 4 2 Encode setup Set the video audio code parameter video file remote monitoring and so on Set every independent channel s coding parameter in the left part and set the combination coding parameter in the right port Note Combination coding introduces video compression technique which combines and compresses multi channel s video to a special channel Its main using multi channel playback simultaneously DUN multi channel real time surveillance mobile surveillance and so on Channel Choose the channel number Code format Standard H 264 Resolution Resolution type CIF Frame rate P 1 Frame s 25 frames s Code stream control You can choose limited code stream or variable code stream When you choose the variable code stream there are six image quality options Code stream value Set the code stream value to modify the image quality The larger code stream value the better image quality Video Audio When the icons are all in reverse displayed the video file is video and audio multiplex stream 2 Digital Video Recorder User Manual f PPPoE e Enable 1 34599 Picture 4 14 network setup Picture 4 15 code setup Picture4 16 network service Picture 4 17 PPPOE setup 4 4 3 Network setup Network card You can choose cable network card or wireless network card DHCP enable Obtain IP address automatically Note DHCP server
14. the alarm state is turned off The range is 10 300 seconds Record channel Choose the recording channel multiple options supportive Trigger the video signal when the alarm is turned on Note Set in the recording channel and perform the linkage recording Start detecting video files in the corresponding time section PTZ Activation Set the PTZ linkage when the alarm is turned on Note PTZ linkage is set in the shortcut menu PTZ control Set the tour between spots trail tour and so on Show message Pop the alarm information dialog box in the local host computer screen E Mail Means sending an E mail to user when the alarm is turned on Note Set in the network service and send an E Mail Picture 4 8 video loss Picture 4 9 alarm input Picture 4 10 Abnormality 4 3 2 Video Loss When the equipment cannot obtain the channel video signal the video loss alarm is turned on and the linkage function is turned on Set method refer to chapter 4 3 1 4 3 3 Alarm input When the equipment obtains the external alarm signal the alarm function is turned on Set method refer to chapter 4 3 1 25 Digital Video Recorder User Manual 4 3 4 Alarm output Refer to chapter 3 5 4 4 3 5 Abnormality Analyzing and inspecting current software and hardware of the device When some abnormal events happen the device will make a relative answer such as show message and buzzer Event typel Selecting abnormality you want to inspect
15. Digital Video Recorder User Manual Go eveTrace eure USER MANUAL ETIOC2E 16 channel CIF Digital Video Recorder Gg SECURITY SOLUTIONS 1 Digital Video Recorder User Manual DVR User s Installation and Operation Manual Welcome Thank you for purchasing our DVR This manual is designed to be a reference tool for the installation and operation of your system Here you can find information about this series DVR features and functions as well as a detailed menu tree Before installation and operation please read the following safeguards and warnings carefully Important Safeguards and Warnings 1 Do not place heavy objects on DVR 2 Do not let any solid or liquid fall into or infiltrate the DVR 3 Please brush printed circuit boards PCB s connectors fans machine box and so on regularly 4 Before the dust cleaning please Switch OFF the power supply and unplug it 5 Do not disassemble or repair the DVR by yourself Do not replace the components by yourself Environment 1 Please place and use the DVR between 0 40 degree Celsius Avoid direct sunlight Stay away from heat source 2 Do not install the DVR in damp environment 3 Do not use the DVR in smoky and dusty environment 4 Please ensure that the DVR level installation is in a stable workplace 5 Please install in ventilated place Keep the vent clean 6 Use within the rating input and output scope Digital Video Recorder User Manual Table o
16. EE 43 Digital Video Recorder User Manual 1 Product Introduction 1 1 Product overview The series DVR is designed especially for security and defense field which is outstanding Digital Surveillance product It introduces embedded LINUX operating system which is more stable It introduces standard H 264 video compression format and G 711A audio compressed format which ensures the high quality image low error coding ratio and single frame playing It introduces TCP IP network technology which achieves the strong network communication ability and telecommunication ability The series DVR can be used individually or online applied as a part of a safety surveillance network With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability The series DVR can be applied in the bank telecom electric power system judicial system factory storehouse water conservancy and so on 1 2 Main functions Real time surveillance e Analog interface and VGA interface VGA interface is equipped selectively e Surveillance function through monitor or display Storage e Special storage format which ensures the data safety Compression e Real time compression which ensures the audio and video signal stable synchronization Backup e Through SATA interface and USB interface such as USB equipment removable hard disk and so on e Through net download the files in the hard disk Pl
17. ayback e Individual real time video recording as well as searching playback network surveillance recording check downloading and so on e Multi Playback mode zooms at arbitrary region Net operating e Through net tele surveillance in the real time e Tele PTZ control e Tele recording and real time playback Alarm linkage e Multi route relay output which is convenient for the alarm linkage and light control and the sort e Protecting circuits at the alarm input and output interface which protects the main machine from damage 2 Digital Video Recorder User Manual Communication interface e RS485 interface which fulfills the PTZ control e Standard Ethernet network interface which fulfills the telecommunication function Intelligent operating e Mouse action function e Fast copy and paste operating for the same setting Digital Video Recorder User Manual 2 Open package check and cable connections 2 1 Hard Disk Installation Before you use the DVR for the first time the HDD should be installed in 1 2 4 units of HDD can be installed according to the model of DVR LL T Take off the cover Open the DVR Fix the HDD by Cover the housing Fix the housing housing screen connect the data Digital Video Recorder User Manual Description of rear panel Rear panel of 4 channel H 264 DVR T Alarm input e Connection figure of alarm input and output AL A2 AS A4 CMAN L Alarm input Pn Digital V
18. ds or longer to protect the hard disk 6 Please keep the DVR away from heat resource 7 Please keep the DVR ventilated for better heat radiator Please check the system and maintain regularly AR WN 41 Appendix 1 Remote controller operation Serial number 2 3 4 5 6 7 8 Name Multi window button Numeric button Esc Direction button Record control Record mode ADD FN Digital Video Recorder User Manual Function Same function as Multi window button in the front panel Code input number input channel switch Same function as Esc button in the front panel same function as direction button in the front panel Control the record Same function as Record mode Input the number of DVR to control it Assistant function 42 Digital Video Recorder User Manual Appendix 2 Mouse Operation Take right hand as an example The mouse in USB connection is supportive Double click one item 1n the file list to Add or subtract number in the number playback the video Press middle setting Double click the playback video to button Switch the items in the combo box zoom in or out the screen Double left Double click the channel to make it full Page up or down in the list click screen display Double click again to resume the multi Move mouse Choose the widget or move the item in window display the widget Left click Choose the according function in the Drag mouse Set the mo
19. f Contents COMENS TREE TP 3 BE eelere NEEN 5 NER l Product OVi Vie Weak aaeei E 5 We M n UAC L EEN 5 2 Open package check and cable CORDE CLOS EN 7 2 1 Hard Disk Instalati EE 7 E Ee E 10 ES ak Eel TENERE 10 32 RTT OLET TO T NETTO TROUPE NICO EPOR TESTEN RENE 10 SN E mE 10 Ss ductu c NT EMT TC 11 3 5 Desktop shortcut MN ERR ETT OO To S e 11 SN B llorar EE 11 BOLZ Video DIY DUE LL IL eure E E E entree rcrr ONN 12 3 5 3 Record Mode m e nm eeeeeeeeeeem 14 3 5 4 Alarm output arcsec crc ooo oos 14 EE 15 ie OG OWES SIN NR EEEE E E OO AA MY 18 39 EE 18 E EN 19 3 5 9 Window switch NER o esses veuesteienetierdseiratyevairier sweat ener pnestirny austen nesiienyuuentnvenvstensseesrevennssids 19 EE 20 4l eegene 20 2 2 Recordin e EE 22 4 2 1 Recording NEE oos itrrotei bacasuradddvesusduvse dut e epo CUP Dind poS aai naninira a hed X baceneeverimarsadialteseesaadaubactiunta DE EAEE ad UA EEES 22 4 2 2 E E e EE 23 ZUM PEIUS AC EE 23 ESSE EOD E PIDE OPE Tn 24 LN BAT oou DI 24 Ac 2 LOA Bro NER 25 Digital Video Recorder User Manual ENEE 25 4 3 4 Alarm output Mp eeenereeenntneerenerersenntree senate rererrreserrtserrret treet ste r
20. hard disk 1 Inthe desktop shortcut menu 2 Main menu video recording video playback Note The hard disk that saves the video files must be set as read write or read only state Listed files Look up the listed files that accord with the searching criteria File information Look up the found file information File backup Backup the chosen file Click the button and operate as followed Note The storage must be installed before the file backup If the backup is terminated the already existing backup can playback individually Detect Detect the storage connected with the DVR such as hard disk or universal disk Erase Choose the file to delete and click Erase to delete the file Stop Stop the backup Backup Click Backup button and the dialog box is popped up You can choose the backup file according to type channel and time Remove Clear the file information Add Show the file information satisfying the set file attributes Start Pause Click the Play button to start the backup and click the Pause button to stop the backup Button Function Button Function Play pause eg Back ward wi Q ii L 12 an Stop Jh Volume v Z EA Slow play sy Fast play L w OA Previous frame um Next frame E Previous file Lory Next file BE mg i aa Repeat Pay Full screen d back uir Cancel During backup you can exit the page layout t
21. ideo Recorder User Manual Name Description Video input Standard BNC port connected with the Camera Video output Connected with the video input of the monitor Name Description VGA VGA video signal output port connected with a VGA port of a computer monitor Audio output Connected with earphone or cable speaker Audio input port Connected to audio input device 485 AB External RS485 it can connect PTZ or decoder and can Control PTZ via the panel mouse remote control alarm port and network Connected with alarm input and output USB Connected to USB Pen drive or mouse and used for system software upgrade or video file backup NET RJ 45 network port connected to network cable and used for remote browse or control Power Power input is DC 12V 5A 16 Channel DVR Power input is 12V 3A 4 8 channel DVR Digital Video Recorder User Manual 3 Basic operation Note The button in gray display indicates non support 3 1 Turn on Plug the power supply and turn on the power supply switch Power supply indicator light indicates turning on of the video recorder After the startup you will hear a beep The default setting of video output is multiple window output mode If the startup time is within the video setting time the timing video recording function will start up automatically Then the corresponding channel is shining and the DVR is working normal
22. is pre installed IP address Set the subnet mask code Default 192 168 1 10 Subnet mask code Set the subnet mask code Default 255 255 255 0 Default gateway Set the default gateway Default 192 168 1 1 DNS setup Domain name server it translates the domain name into IP address The IP address is offered by network provider The address must be set and reboot then it works TCP port Default 34567 HTTP port Default 80 HS download The high speed download option can be enabled Network transmission strategy There are three strategies self adaption image quality precedence and fluency precedence The code stream will adjust according to the setup Self adaption is the trade off between the image quality precedence and fluency precedence Fluency precedence and self adaption are valid only when the assistant code stream is turned on Otherwise image quality precedence is valid 4 4 4 Network service Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters PPPOE setup 28 Digital Video Recorder User Manual Input the user name and password that ISP Internet service provider provides After saving it reboot up your system Then the DVR will build a network connection based on PPPOE The IP address will change into dynamic IP address above operation is well done Operation After PPPOE dialing successfu
23. lly look up the IP address in the IP address and obtain the current IP address Then use this IP address to visit the DVR through user port NTP setup The NTP server must be installed in the PC f TE 2 NTP x Picture 4 18 NTP setup Picture 4 19 EMAIL setup Picture 4 20 IP purview setup Host computer IP Input the IP address installed NTP server Port Default 123 You can set the port according to NTP server Time zone London GMT 0 Berlin GMT 1 Cairo GMT 2 Moscow GMT 3 New Delhi GMT 5 Bangkok GMT 7 Hong Kong Beijing GMT 8 Tokyo GMT 9 Sydney GMT 10 Hawaii GMT 10 Alaska GMT 9 Pacific time GMT 8 American mountain time GMT 7 American mid time GMT 6 American eastern time GMT 5 Atlantic time GMT 4 Brazil GMT 3 Atlantic mid time GMT 2 Update cycle The same with the NTP server check interval Default 10 minutes DDNS It is the abbreviation of dynamic domain name server Local domain name Provide the domain name registered by DDNS User name Provide the account registered by DDNS Password Provide the password registered by DDNS When the DDNS is successfully configured and start you can connect the domain name in the IP address Note The DNS must be configured in the network setup 29 Digital Video Recorder User Manual Mobile Monitor Enable Port 34599 mmm regm Picture 4 21 DNS setup Picture 4 22 Mobile Monitor Setup Picture 4 23 Output Mode Mobile Monitor Setup To visit
24. ly Note 1 Make sure that the input voltage corresponds with the switch of the DVR power supply 2 Power supply demands 220V 10 50Hz 3 Suggest using the UPS to protect the power supply under allowable conditions 3 2 Turn off There are two methods to turn off the DVR Entering main menu and choosing turn off in the turn off the system option is called soft switching Pressing the power supply switch is called hard switching Illumination e Auto resume after power failure If the DVR is shut down abnormally it can automatically backup video and resume previous working status after power failure e Replace the hard disk Before replacing the hard disk the power supply switch in the rear panel must be turned off e Replace the battery Before replacing the battery the setting information must be saved and the po wer supply switch in the real panel must be turned off The DVR uses button battery The system time must be checked regularly If the time is not correct you must replace the battery we recommend replacing the battery every year and using the same battery type Note The setting information must be saved before replacing the battery otherwise information will be lost 3 3 Login When the DVR boots up the user must login and the system provides the corresponding functions with the user purview There are two user settings The names are admin and ouest These names have no password Admin is the super user purview
25. n button to execute Note write read disk The equipment can write or read data Read only disk The equipment can read data but cannot write data Redundant disk Double backup the video files in the write read disk m Main Menu gt Advanced gt HDD Manage Main Menu Advanced Account A Modify Pwd Read Write Normal 232 881 admin Gui user Normal User Name admin Old New Confirm Picture4 27 hard disk management Picture 4 28 user management Picture 4 29 modify password Picture 4 30 add user 4 5 2 User management Manage the user purview Note 2 The char length is 8 bytes at most for the following user and user group name the blank or behind the char string is invalid The middle blank is valid Legal char include letter number underline subtraction sign dot 3 There is no limit in the user and user group You can add or delete the user group according to user definition 32 Digital Video Recorder User Manual The factory setup include user admin You can set the group as you wish The user can appoint the purview in the group 4 Theuser management include group user The group and user name cannot be the same Each user only belongs to one group Modify user Modify the existing user attribute Modify group Modify the existing group attribute Modify password Modify the user password You can set 1 6 bit password The blank ahead or behind the char string is invalid The middle blank in the
26. ng time section alarm output screen hint recording PTZ tour Abnormality Set alarm message or buzzer for abnormal events such as IP address conflict or full HDD l Set video loss alarm channel linkage parameters depending time section Video loss alarm output screen hint recording PTZ tour Alarm Set alarm input channel equipment type linkage parameters defending time Alarm input section alarm output screen hint recording PTZ tour Alarm output Set alarm output screen hint recording PTZ tour Common Set system time data format language hard disk full time operation machine Configuration number video format output made summer time stay time System configuration Set main assistant coding parameter code mode resolving ability frame Code l rate code stream control image quality type code stream value frame Configuration between value video audio enable 20 Digital Video Recorder User Manual Network Set basic network parameters DHCP and DNS parameters network high configuration speed download System PPPOE NTO E Mail purview DDNS parameter Configuration Output Mode Set channel name purview hint icon state transparency cover area time title channel time fold PTZ configuration Set channel PTZ protocol address baud rate date bit stop bit check e Serial port Set serial port function baud rate date bit stop bit check le configuration configuration l
27. ntral Government or State Government Departments public sector undertakings banks educational institutions multinational organizations international agencies private companies that are registered under the Factories act 1948 and Companies act 1956 The bulk consumers have to ensure that the e waste generated by them is channelized to authorized collection centers or is taken back by the producers They shall maintain records of E waste generated by them in Form 2 and make such records available for scrutiny by the State pollution control or the Pollution control Committee concerned All consumers of electrical and electronic equipment irrespective of their status as bulk consumers or not shall ensure that E waste generated by them is channelized to authorized collection center s or registered dismantler s or recycler s or is returned to the pick up take back services provided by the producers Please refer to our website www godr ej com in the Good amp Green section of CSR module for more details All our products intended to be recycled under the category of E waste as defined above carry a label or stamp of the WEEE symbol A wheelie bin with a cross which states that it falls under the hazardous waste category and is not to be disposed along with normal garbage We seek your support in ensuring environmentally sound management of E waste and aid us in sustaining our earth s natural resources and maintaining the earth s green c
28. o carry out their functions File searching Search the file according to the searching parameter File Type Aii zi Read Write Channel All Start Time W 3 09 04 08 40 00 End Time 09 04 15 00 00 Play Mode Skip Decode Sync Mode re rn Picture 3 6 File searching File type Set the searching file type Channel Set the searching channel Start Time Set the searching time scan Playback control Refer to the following sheet for more information Operation hint Displays the function of the cursor place NOTE Frame by frame playback is only performed in the pause playback mode Special Functions 13 Digital Video Recorder User Manual Digital Video Recorder User Manual Accurate playback Input time H M S in the time column and then click Play The system can operate accurate playback according to the searching time Local zoom When the system is in single window full screen playback mode you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom You can right click mouse to exit 3 5 3 Record Mode EXC A EI E ENER d Alarm Type All 1 Configuration Mode All Schedule Manual Stop Manual Stop Status 12345678 9 10111213141516171819202 SSgggegeeeeeeeegeeeeeee Picture 3 7 Recording Control Interface Picture 3 8 Alarm output Picture 3 9 PTZ Setup Please check current channel status o means it is not in recording status
29. ote The address must be consistent with the dome address Baud rate Choose the corresponding dome baud rate length You can control the PTZ and vidicion Default 115200 Date bit Include 5 8 options Default 8 Stop bit Include 2 options Default 1 Parity Include odd check even check sign check blank check Default void 4 4 7 Serial port setup a Picture 4 24 PTZ setup Picture 4 25 Serial Port Setup Picture 4 26 Tour Setup Serial port function Common serial port is used to debug and update program or set up specific serial port Baud rate Choose the corresponding baud rate length Data bit Include 5 8 options Stop bit Include 2 options Parity Include odd check even check sign check blank check 4 4 8 Tour setup Set the tour display Means that the tour mode is turned on You can choose the single window four windows nine windows sixteen windows tour display or single display Interval Set the tour switch interval The set range is 5 120 seconds 31 Digital Video Recorder User Manual Note 5 9 means turn off on the tour 4 5 Management tools 4 5 1 Hard disk management Configure and manage the hard disk The menu displays current hard disk information hard disk number input port type status and overall capability The operation include setup the write read disk read only disk redundant disk hard disk format resume default Choose the hard disk and click the right functio
30. over intact for the benefit of our future generations 44 ADVICES Design and description of this product are subject to change or renewal without notice Unless allowed in the Copyright Lawit is prohibited to reprint adoptor translate the content hereof without prior witten pemisssion All functions of full edition model are described in this Manual Half edition model is only equipped with some of its functions 45 Digital Video Recorder User Manual
31. riting a CD Possible reasons are as followed e Therewritable machine and the hard disk are shared the same data lines e The data is too much Please stop recording and backup e The data exceeds the backup storage e The backup equipment is not compatible e The backup equipment is damaged 17 The keyboard cannot control the DVR Possible reasons are as followed e The serial port of the DVR is not set correctly 39 Digital Video Recorder User Manual e The address is not correct Digital Video Recorder User Manual e When multiple transformers are connected the power supply is not large enough Please give each transformer individual power supply e The distance is too far 18 Alarm cannot be recessional Possible reasons are as followed e The setting of the alarm is not correct e The alarm output Is turned on manually e The input machine is damaged or the connections are not correct e There are some problems for specific program edition please update the program 19 Alarm is not working Possible reasons are as followed e The setting of the alarm is not correct e The connection of the alarm is not correct e The alarm input signal is not correct e Analarm is connected with two loops synchronously 20 The remote controller is not working Possible reasons are as followed e The remote control address is not correct e The remote control distance is too far or the angle is too large e The ba
32. ssible reasons are as followed e The image quality is too bad e the reading program is wrong Reboot up the DVR e The data line of the hard disk is damaged e The hard disk is damaged e The hardware of the DVR is damaged 8 There is no audio signal in the surveillance window Possible reasons are as followed e tis notan active tone arm e tis notan active squad box e The audio lines are damaged e The hardware of the DVR is damaged There is audio signal in the surveillance window but no audio signal in the playback state 37 Digital Video Recorder User Manual Possible reasons are as followed e Settings the audio is not chosen e The according channel is not connected with the video 10 The time is wrong Possible reasons are as followed e Setting is wrong e The battery is in bad connection or the voltage is too low e The oscillation is damaged 11 The DVR cannot control the PTZ Possible reasons are as followed e There is something wrong with the frontal PTZ e The setting connection or the installation of the PTZ decoder is not correct The connections are not correct The PTZ setting of the DVR is not correct The protocols of the PTZ decoder and the DVR are not matched The address of the PTZ decoder and the DVR are not matched e When multiple decoders are connected the far port of the PTZ decoder line A B must connect a 120 ohms resistance to reduce the reflection otherwise the PTZ con
33. te ents MV DM HIMMEL MEME MEM tre TTT Ter Teeny 26 zm ragioni Pe SOc iene eas 26 EE 26 2X General vj T P 26 E EE 27 4 4 3 Network setup P U 28 EE 28 zh SEG EE d 30 EE E P TA 31 4 4 7 Serial port setup ENTE 31 A ESA KOTT MON E 31 4 5 Management e E 32 ee 32 4 5 2 User CUR MH 32 13 GIU UI SM E 33 zs e d US E 33 43 MAN Ms ON INNING E 34 436 Resume Cl T S 34 Ne 34 4 6 System informat ON RI ETT OT Tom 35 Sad Malo E Ee Ee et SN S T EN 35 SEENEN 35 ZR UNE ee te n EAE D I EE Tn TT erm 35 KEE EE 35 d DoD dO VS LOT ree nc tont E E EE EE Mui mur UR UK anced ve Pcr E E nated tec rcu E ba dm p REN c Aud ar OU re litre Cad nsu de ne DRAN UE 35 VM Ste P NEE Toce 36 SE C 36 vM EUN Igor 4 Appendix 1 Remo te controller e 42 Appendix 2 Mouse E Te
34. the PTZ protocols Step Set the PTZ rotation range Default range 1 8 Zoom click button to adjust the zoom multiple of the camera Focus click Button to adjust the focus of the camera Iris click Button to adjust the iris of the camera Direction control Control the PTZ rotation 8 directions control is supportive 4 directions in front panel is supportive High speed PTZ Full screen shows channel image left press mouse and control PTZ to rotate then rotate the mouse to adjust the zoom multiple of the camera Setup Enter the function operation menu Window switch Switch between different windows Special Function 1 Preset Set a location for the preset calls the preset points PTZ automatically turns to the set position 1 Preset option Set a location for the preset procedure is as follows Step 1 In picture 3 10 clicking the direction buttons will turn into preset position click the set button to enter Picture 3 11 Step 2 Click the Preset button then write the preset points in the input box Step 3 Click Set button return to the picture 3 10 Complete setup that is the preset points and preset position corresponds to the values entered DEL Preset After entering preset points click Del Preset button to remove the preset 15 Digital Video Recorder User Manual 2 Preset point calls In picture 3 10 click Page switch button enter PTZ control interface as shown in picture 3 12
35. the device by mobile please make a router mapping of this port and use CMS to monitor and operate it by protocol Enable Select it to make sure abnormal function workable Port It s a port of mobile monitoring which you ned to make a router mapping of if want to visit it by mobile 4 4 5 GUI display Channel name m Click the channel name modify button and enter the channel name menu Modify the channel name The 16 Chinese characters and 25 letters are supportive Time title m means the selective state Display the system data and time in the surveillance window channel title m means the selective state Display the system channel number in the surveillance window Recording status m means the selective state Display the system recording status in the surveillance window alarm status m means the selective state Display the system alarm status in the surveillance window code stream information m means the selective state The ninth window displays the code stream information in the nine window preview status transparency m Choose the background image transparency The range is 128 255 resolution m set display resolution channel m Choose the set code output channel number 30 Digital Video Recorder User Manual 4 4 6 PTZ setup Channel Choose the dome camera input channel Protocol Choose the corresponding dome protocol PELCOD as an example Address Set as the corresponding dome address Default 1 N
36. the regular recording in the set time section The video file type is R e Detection Trigger the motion detect camera mask or video loss signal When above alarm is set as opening recording the detection recording state is on The video file type is M e Alarm Trigger the external alarm signal in the set time section When above alarm is set as opening recording the detection recording state is on The video file type is A Note Refer to chapter 4 3 to set corresponding alarm function 4 2 2 Video playback Refer to chapter 3 5 2 4 2 3 Video backup You can back up the video files to external storage through setup Note The storage must be installed before the files backup If the backup is terminated the already existing backup can playback individually Detect Detect the storage connected with the DVR such as hard disk or universal disk Erase Choose the file to delete and click erasure to delete the file Stop Stop the backup Backup Click backup button and the dialog box is popped up You can choose the backup file according to the type channel and time 23 Digital Video Recorder User Manual Remove Clear the file information Add Show the file information satisfying the set file attributes Start Pause Click the play button to start the backup and click the pause button to stop the backup Cancel During backup you can exit the page layout to carry out other functions
37. tion detect area menu Right click Pop desktop short cut menu in preview Set the cover area state 43 Digital Video Recorder User Manual INFORMATION ON E WASTE HANDLING AND MANAGEMENT Dear Customer The Ministry of Environment and Forests have published The E waste Management and Handling Rules 2010 which comes in effect from 1 May 2012 E waste is defined as any electrical or electronic component of products in whole or in part or rejects from their manufacturing or repair process which are intended to be discarded These rules apply to every producer consumer or bulk consumer involved in the manufacture sale purchase and processing of electrical and electronic equipment or components as specified in Schedule 1 please refer to our website WWwW godrej com in the Good amp Green section of CSR module for more details Under these rules specific roles and responsibilities are defined for producers consumers and recyclers handling and mana ging E waste E waste is to be managed in an environmentally sound manner which means taking steps to ensure that health and environment are protected from adverse effects of hazardous substance contained in such wastes Rule 6 of the E waste Management and Handling Rules 2010 states that bulk consumers of electrical and electronic equipment shall be responsible for recycling of the e waste generated by them Bulk consumer means bulk users of electronic and electrical equipment such as Ce
38. to chapter 4 5 1 sda USB DISK E mmobiks MMC DISK Remain Tota 1 96 GB 1 97 GB 1 82 GB 1 83 GB Required Remaining 0 00 KB 1 96 GB Backup format H264 Picture 4 1 recording setup Picture 4 2 detect the equipment Picture 4 3 file backup Channel Choose the corresponding channel number to set the channel Choose the AII option to set the entire channels 22 Digital Video Recorder User Manual Redundancy Choose the redundancy function option to implement the file double backup function Double backup is writing the video files in two hard disks When you do the double backup make sure there are two hard disks installed One is read write disk and the other is redundant disk refer to 4 5 1 Length Set the time length of each video file 60 minutes default value Pre Record Record 30 seconds before the action time length is decided by the code stream Mode Set video state schedule manual or stop e Schedule Record according to the set video type regular detection and alarm and time section e Manual Click the button and the corresponding channel starts recording no matter the channel in any state e Stop Click the stop button and the corresponding channel stops recording no matter the channel in any state Time section Set the time section of common recording The recording will start only in the set range Recording type Set recording type regular detection or alarm e Regular Perform
39. trol is not stable e The distance is too far 12 The motion detect is not working Possible reasons are as followed e The time range set is not correct e The motion detect area set is not correct e The sensitivity is too low e Limited by some hardware edition 13 I cannot login via web Possible reasons are as followed e The system is Windows 98 or windows me We recommend updating to Windows 2000sp4 or higher edition or installing the software for low edition e ActiveX is hold back 38 e The edition is not exceeded dx8 1 Update the display card driver e Network connection failure e Network setting issues e Invalid password or user name e The user edition is not matched the DVR program edition 14 The image is not clear or there is no image in network preview state or video file playback state Possible reasons are as followed e Network is not stable e The user machine is resource limited e The region shelter or channel protection is set e Choose the play in team mode in the network setup of DVR e The user has no surveillance purview e The real time image of the hard disk recording machine itself is not clear 15 Network connection is not stable Possible reasons are as followed e Network is not stable e IP address is conflicted e MAC address is conflicted e The network card of the computer or the hard disk recording machine is bad 16 There is something wrong with the USB backup or w
40. ttery is used up e The remote controller or the front panel of the recording machine is damaged 21 The storage time is not enough Possible reasons are as followed e Front vidicon quality is bad The lens is too dirty The vidicon is in backlighting installation e The hard disk capability is not enough e The hard disk is damaged 22 The downloading file cannot play Possible reasons area as followed e There is no media player 40 Digital Video Recorder User Manual e There is no DX8 1 software or higher edition e There is no DivX 503 bundle exe file to play AVI video files e The DivX503bundle exe and ffdshow 20041012 exe files must be installed in the windows XP system 23 I cannot remember the advanced code or network in the local menu operation Please contact the local service or call the HQ service We will offer the service according the machine type and the program 5 2 Maintenance Please brush printed circuit boards connectors fans machine box and so on regularly Please keep the grounding well done to prevent the video or audio signal interfered and the DVR from static or inductive electricity Do not pull out the video signal line or RS 232 port with the power on Do not use the TV in the local video output port VOUT of DVR It will damage the video output circuit easily Do not turn off the switch directly please use the turn off function in the menu or press the turn off button in the panel 3 secon
41. ure 4 33 Resume default Picture 4 34 upgrade information Picture 4 35 hard disk statistics 4 5 5Auto maintenance The user can set the auto reboot time and auto file deleting time limit 4 5 6 Resume default The system resume to the default setup You can choose the items according to the menu 4 5 7 Upgrade Main Meru Info 3BP5 MBH 17 4 All tart Time 2042 03 29 00 A Code stream Picture 4 37 log information Picture 4 38 edition information Picture 4 36 Upgrade Choose USB interface Upgrade file Choose the file which needs upgraded 34 Digital Video Recorder User Manual 4 6 System information 4 6 1 Hard disk information Display the hard disk state hard disk type overall capability residual capability the recording time and so on Clue Means that the hard disk is normal X means that the hard disk is broken down means that there is no hard disk If the user needs to change the damaged hard disk you must shut down the DVR and take up all the damaged hard disks then install a new one behind serial number means the current working disk such as 1 If the corresponding disk is damaged the information will display 4 6 2 Code stream statistics Display the code stream Kb s and hard disk capability MB s in real time It displays as the wave sketch map 4 6 3 Log information Look up system log according to the set mode Log information include System operation configuration operation
Download Pdf Manuals
Related Search