Instruction Manual
Contents
1. Return the ceiling tile into the ceiling grid Fig 8 coe aN X he O Nier N www ETiLED us Please contact 1 216 468 0232 for further assistance 5 Care and Cleaning CAUTION Before attempting to clean the fixture disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box Clean the fixture with a soft dry cloth Do not use any cleaners with chemicals solvents or harsh abrasives Troubleshooting Problem Possible Cause Solution The fixture will not light The power is off Ensure the power supply is on The circuit breaker is off Ensure the circuit breaker is in the on position The fuse blows or the circuit breaker trips when the light is turned on The wires are crossed or the Check the wire connections power wire is grounding out Contact a qualified electrician or call the ETi SSL Customer Service Team at 1 216 468 0232 SOLID STATE LIGHTING INC Questions problems missing parts call ETi SSL Customer Service 8 30 a m 5 p m EST Monday Friday 1 216 468 0232 WWW ETILED US Retain this manual for future use www ETiLED us Please contact 1 216 468 0232 for further assistance2. e equipment NOTICE Do not use with dimmers Warranty WHAT IS COVERED The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion provided that the product has not been damaged through misuse abuse accident modifications alterations neglect or mishandling WHAT IS NOT COVERED This warranty shall not apply to any product that is found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result of an accident misuse abuse negligence alteration faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this is considered normal wear and tear The manufacturer does not warrant and specifically disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The
3. lation to a suspended ceiling grid Attaching the earthquake clips to the fixture body Attach the earthquake clips B on the fixture body two clips on two sides C Fig 1 c nl Fig 1 Installing the backlit troffer Nn 2 into the ceiling grid Pe gt S Remove 2 ceiling tiles Fig 2 Insert the troffer into the ceiling grid attach the earthquake clips to the ceiling grid Fig 3 www ETiLED us Please contact 1 216 468 0232 for further assistance Making the electrical connections Open the driver box of the troffer Fig 4 Connect the white wire from the mains power supply to the white wire from the outlet box Fig 5 Connect the black wire from the mains power supply to the black wire from the outlet box Fig 5 Connect the ground wire from the mains power supply to the ground wire from the outlet box Fig 5 Cover the wire connections using the wire connectors not provided Fig 6 Wrap the wire connections with electrical tape for a more secure connection Insert the wires back inside the driver box of the troffer Insert the backlit panel into the ceiling grid Fig 7
4. manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Contact the ETi SSL Customer Service Team at 1 216 468 0232 or visit www etiled us www ETiLED us Please contact 1 216 468 0232 for further assistance 2 Pre Installation PLANNING INSTALLATION Read all instructions before assembly Before starting installation of this fixture or removal of a previous fixture disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box To avoid damaging this product assemble it on a soft non abrasive surface such as carpet or cardboard This fixture can be installed in one method 1 lays into a suspended ceiling NOTE Keep your receipt and these instructions for proof of purchase TOOLS REQUIRED Wire Safety Ladder Gloves Strippers Goggles Flathead Phillips Electrical Wire Screwdriver Screwdriver Tape Cutters HARDWARE INCLUDED A NOTE Hardware not shown to actual size AA Part Description Quantity B Earthquake clips 4 PACKAGE CONTENTS Part Description Quantity A Vx17 2 x2 orl x4 1 Backlit Troffer B Earthquake clips 4 www ETiLED us Please contact 1 216 468 0232 for further assistance 3 Instal
5. o comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help assembly and installation Failure to do so could lead to electric shock fire or other injuries which could be hazardous or even fatal working on is shut off Either remove the fuse or turn off WARNING Ensure the electricity to the wires you are A the circuit breaker WARNING Changes or modifications not expressly A approved by the party responsible for compliance could void the user s authority to operate th
6. ts SOLID STATE LIGHTING Models 54304141 INC 54301141 amp 54302141 USER MANUAL LED INTERIOR BACKLIT TROFFERS Questions problems missing parts call ETi SSL Customer Service 8 30 a m 5 30 p m EST Monday Friday 1 216 468 0232 WWW ETILED US THANK YOU Thank you for purchasing our LED product For additional information or assistance please call us at 216 468 0232 or log on to our website at www etiled us Visit us online to see our full line of LED products Thank you for choosing ETi SSL Table of Contents Table Of Contents cccccccccscssececeeeceeeseeeeeeeseseseensuensees 2 Hardware Included Safety Information aeeccesce sees coseecesceacciecsecctecewecacsatcesceveuaes 2 Package CONTENUS ccccccccccccececceccececceccescecercescesercenees Warranty seeeaneaeeaeeneeaeeneeaneneeateneenanenananeneeanenteanenteatenaeas 2 Installation to a Suspended ceiling cssssssscceseeeeeeeee 5 Pre INStallatiOn ccccesssssseeeeeeeecessnssneeeeeeeeeenneneneeenenes 3 Care and Cleaning easscsssssscsssssesssessseseccsssssessseeseeeesseesess 6 Planning Installation uss sssssissssssersessssesernisnsiarsessessessns 3 Troubleshooting ssssssssuunsennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnan 7 Tools Required eseni 3 Safety Information WARNING Carefully read and understand the information given in this manual before beginning the NOTICE This equipment has been tested and found t
Download Pdf Manuals
Related Search