DJ Lase Performance 150 RGY / 250 RVP / 200 GVC showlaser
Contents
1. Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice This section provides an overview of the symbols and signal words used in this user manual th mann MUSIC IS OUR PASSION General notes Signal word DANGER WARNING NOTICE Warning signs A th mann MUSIC IS OUR PASSION This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a pos sible dangerous situation that can result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a pos sible dangerous situation that can result in material and environmental damage if it is not avoided Type of danger Warning high voltage Warning laser radiation General notes Warning suspended load Warning danger zone A th mann MUSIC IS OUR PASSION Safety notes 2 Safety notes Intended use This device is intended to be used for the projection of laser light effects It has been designed exclusively for show applications Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from imp2. environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device M Clean with a soft cloth using normal glass cleaning products B Always dry the parts carefully th mann MUSIC IS OUR PASSION 52 Protecting the environment 11 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive WEEE Do not dispose with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility th mann MUSIC IS OUR PASSION 53 Notes th mann 54 Musikhaus Thomann Hans Thomann Stra e 1 96138 Burgebrach Germany www thomann de
3. fixed positions on Y axis showlaser Channel Value 128 191 192 255 Y axis rotation 0 127 128 191 192 255 X axis rotation 0 127 128 191 192 255 Z axis rotation 0 127 128 191 Function Clockwise moving effect speed increasing from slow to fast Anti clockwise moving effect speed increasing from slow to fast 0 to 359 fixed Y axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast 0 to 359 fixed X axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast 0 to 359 fixed Z axis position Clockwise rolling effect speed increasing from slow to fast DJ Lase Performance 150 RGY 250 RVP 200 GVC 37 Channel Value 192 255 Colour selection 0 31 32 63 64 95 96 127 128 255 250 RVP item no 255906 Channel 1 38 Value Mode selection 0 27 28 55 Function Anti clockwise rolling effect speed increasing from slow to fast Original pre programmed colour Red Green Yellow Colour rolling Function Laser off Auto show red violet pink showlaser Channel Value 56 83 84 112 168 196 224 111 139 140 167 195 223 251 252 255 0 255 Zoom 0 127 128 170 169 209 Function Auto show violet Au
4. switched off immediately To unlock the switch and resume operation turn the knob clockwise th mann MUSIC IS OUR PASSION 19 Installation DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug th mann MUSIC IS OUR PASSION 20 Setup 5 Setup Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections DANGER Laser radiation During installation follow the instructions in Laser safety basics on page 9 NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers th mann MUSIC IS OUR PASSION 21 Setup Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 110 Q W th mann MUSIC IS OUR PASSION 22 Setup DMX indicator If the indicator is flashing in the DMX mode no DMX signal is received Maybe the DMX con troller is not
5. switched on or there is a cabling error If the indicator lights permanently the device receives a valid DMX signal Connections in master slave When you configure a group of devices in master slave mode the first unit will control the mode other units for an automatic sound activated synchronized show This function is ideal when you want to start a show immediately Connect the DMX output of the master device to the DMX input of the first slave device Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on th mann MUSIC IS OUR PASSION 23 Connections and controls 6 Connections and controls Front panel DJ Lase Performance 150 RGY SI PPVLL SE th mann MUSIC IS OUR PASSION 24 LED POWER Shows that the device is turned on LED MUSIC Shows that a sound or music signal is being detected Laser aperture Connections and controls th mann MUSIC IS OUR PASSION 25 Connections and controls Rear panel th mann 26 Power switch Fuse holder Plug for mains cable with fuse holder the input voltage range is printed below LOCK Safety key switch Turns the laser output on or off 8 REMOTE Connection for optional remote safety switch emergency stop An adapter for safety switches equipped with phone jacks is included in the delivery 9 INPUT DMX input 10 OUTPUT DMX output N QO w BR DJ Lase Performance 15
6. 0 RGY 250 RVP 200 GVC 27 14 15 16 17 18 28 FUNC button Opens the main menu UP button Increments the displayed value by one DOWN button Decrements the displayed value by one ENTER button Chooses between the options of the selected mode Display MIC Microphone used for the sound mode Fan Eyelet for safety cable showlaser Operation 7 Operation 7 1 Starting up the device Perform the following steps to start up the device Verify that all required laser safety precautions have been taken Make sure that there is no one in the reach of the laser beam Insert the safety key into the lock 7 If not already connected connect the device to the mains 6 CEE oe Using the main switch 4 turn the device on After a few seconds the fan and the motors start to work The display shows the current operation mode The device is now opera tional Turn the safety key 7 to the ON position to turn the laser beam on 5 th mann MUSIC IS OUR PASSION 29 Operation 7 2 Main menu th mann MUSIC IS OUR PASSION 30 Press FUNC to activate the main menu and to select one of the operation modes When the display flashes use the UP and DOWN buttons to change the displayed value When the display shows the desired value press ENTER To go back to the main menu without any changes press FUNC or wait for one minute All previously made settings are sav
7. 181 A BE 214 221 u 222 229 190 197 230 237 th mann 238 245 MUSIC IS OUR PASSION 47 8 Technical data Item no Laser medium Laser power Laser classification acc to EN 60825 1 2007 Beam diameter at aperture Pulse data Divergence each beam 48 DJ Lase Performance 150 RGY 255905 Green 532 nm Nd YVO4 DPSS Red 650 nm LD GaAlAs Green gt 50 mW Red gt 100 mW 3B lt 5mm All pulses lt 4 Hz gt 0 25 s lt 2 mrad DJ Lase Performance 250 RVP 255906 Violet 405 nm GaAlAs Red 650 nm LD GaAlAs Violet gt 150 mW Red gt 100 mW showlaser DJ Lase Performance 200 GVC 255907 Violet 405 nm GaAlAs Green 532 nm Nd YVO4 DPSS Violet gt 150 mW Green gt 50 mW Divergence total light Number of DMX chan nels Mains power supply Fuse Power consumption Dimensions WxDxH Weight DJ Lase Performance 150 RGY DJ Lase Performance 250 RVP lt 160 9 100 240 V AC 50 60 Hz 5 mm x 20 mm 1 A 250 V slow characteristic 15 W 266 mm x 185 mm x 100 mm 2 6 kg DJ Lase Performance 150 RGY 250 RVP 200 GVC DJ Lase Performance 200 GVC 49 Troubleshooting 9 Troubleshooting DANGER Laser radiation inside During troubleshooting follow the instructions specified in Laser safety basics on page 9 Only qualified personnel may carry out service work on the open device Suitable laser protection glasses a
8. Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside th mann MUSIC IS OUR PASSION 10 Safety notes DANGER Electric shock caused by short circuit Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a registered electrician DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician th mann MUSIC IS OUR PASSION 11 Safety notes DANGER Laser radiation avoid exposure to beam The device contains a class 3B laser classified according to EN 60825 1 Do not look into the laser beam The laser beam can injure your eyes when you directly look into it Do not expose yourself to the laser beam The laser beam can cause
9. d show pink Sound controlled show cyan Sound sensitivity Press FUNC until the display shows S 6 and starts flashing This menu is used to set the sensi tivity of the microphone Using the UP and DOWN buttons you can now choose between S 0 sensitivity 0 music mode disabled and S 7 low sensitivity to S 9 high sensitivity Press ENTER to store the setting DMX mode Press FUNC until the display shows 001 You can now set the number of the first DMX channel used by the device DMX address Use the UP and DOWN buttons to select a value between 1 and 512 Press ENTER to store the value and to start the operation in DMX mode Ensure that this channel number fits to the configuration of your DMX controller Since the device uses nine DMX channels the highest usable DMX start address is 504 showlaser 32 Operation Master Slave mode Press FUNC until the display shows SLA In this mode the device exactly follows the opera tion of the master it is connected to Press ENTER to confirm and to start the operation in Master Slave mode Self test mode Press FUNC until the display shows tSt In this mode the device performs a short self test Press ENTER to start a continuous self test To finish the continuous self test press FUNC 7 3 Stop the device Perform the following steps to stop the device 1 Turn the safety key 7 to the OFF position to t
10. e moving effect speed increasing from slow to fast DJ Lase Performance 150 RGY 250 RVP 200 GVC 43 Channel 5 44 Value Y axis moving 0 127 128 191 192 255 Y axis rotation 0 127 128 191 192 255 X axis rotation 0 127 128 191 192 255 Z axis rotation Function 128 different fixed positions on Y axis Clockwise moving effect speed increasing from slow to fast Anti clockwise moving effect speed increasing from slow to fast 0 to 359 fixed Y axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast 0 to 359 fixed X axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast showlaser Channel Value 0 127 128 191 192 255 Colour selection 0 31 32 63 64 95 96 127 128 255 Function 0 to 359 fixed Z axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast Original pre programmed colour Violet Green Cyan Colour rolling DJ Lase Performance 150 RGY 250 RVP 200 GVC 45 Operation 7 6 Pattern list 0 7 16 23 32 39 J 40 47 160 wy RR m7 Sie IN 104 111 N 140 127 128 135 136 143 th mann 46 Operation 182 189 152 159 160 167 176
11. ed even if you disconnect the device from the power supply Auto show mode Display Aut Aul Au2 Au3 Sou Sol Press FUNC until the display shows Aut The device operates in stand alone mode and dis plays a pre programmed show that can optionally be controlled by the built in microphone Using the UP and DOWN buttons you can now choose between the show types shown in the table below Press ENTER to store the value and to start the operation in Auto Show mode Show DJ Lase Performance 150 RGY DJ Lase Performance 250 RVP DJ Lase Performance 200 GVC Item no 255905 Item no 255906 Item no 255907 Auto show green red yellow Auto show red violet pink Auto show green violet cyan Auto show red Auto show violet Auto show green Auto show green Auto show red Auto show violet Auto show yellow Auto show pink Auto show cyan Sound controlled show green red Sound controlled show red violet Sound controlled show green yellow pink violet cyan Sound controlled show red Sound controlled show violet Sound controlled show green DJ Lase Performance 150 RGY 250 RVP 200 GVC 31 Display Show DJ Lase Performance 150 RGY DJ Lase Performance 250 RVP DJ Lase Performance 200 GVC Item no 255905 Item no 255906 Item no 255907 So2 Sound controlled show green Sound controlled show red Sound controlled show violet S03 Sound controlled show yellow Sound controlle
12. ee DJ Lase Performance 150 RGY 250 RVP 200 GVC showlaser th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann Thomann GmbH Hans Thomann Stra e 1 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 28 07 2015 ID 255905 Table of contents na vu RA WN Table of contents Generalnotes nourrie nent tien et 5 Safety NOTES riura ninini iaria aadis idari iiaei aissard 8 Features EE ME EEE 15 installati icnn 16 Sep AE 21 Connections and controls 24 Operation di D nk 29 7 1 Starting up the device rennes 29 72 M inimenu eisen iar nissan t hr ran h eennen R RARR a 7 3 Stopthe device at 7 4 Menu diagrammes 7 5 Functions in DMX mode ss 35 7 0 Patten IST RSR an en nn nee en nent 46 Technical data ee andere 48 th mann MUSIC IS OUR PASSION Table of contents 9 Troubleshooting isnesninedninnnenennnnnenieennideneden 50 1O ei 4 1 11117 aoi eee Dole er en tes 52 11 Protecting the environment 53 th mann MUSIC IS OUR PASSION 1 General notes Symbols and signal words General notes This user manual contains important information on safe operation of the device Read and follow all safety notes and all instructions Save this manual for future reference Make sure that it is available to all persons using this device If you sell the device include the manual for the next owner
13. re required for any activities at the device In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting th mann MUSIC IS OUR PASSION 50 Symptom Remedy Device not working no light fan not working Check the power connection and main fuse No response to the DMX controller 1 If the display shows a flashing number for example 001 no DMX signal is being received Verify that the DMX controller is switched on Check the DMX connectors and cables to see if they are properly linked 2 If the display does not flash and there is no response check the address set tings and DMX polarity 3 Try using another DMX controller 4 Check whether the DMX cables run near or parallel to high voltage cables that may cause damage or interference to the DMX interface circuit If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de DJ Lase Performance 150 RGY 250 RVP 200 GVC 51 Cleaning 10 Cleaning DANGER Laser radiation During cleaning follow the instructions specified in amp Laser safety basics on page 9 To avoid laser emission remove the safety key before you start to clean the device Optical lenses Clean the exterior of accessible optical lenses periodically to optimise light output The fre quency of cleaning depends on the operating
14. res The showlaser is specially suited for discos clubs bars stages etc Its control via the DMX interface allows smooth integration into light shows Special features of this device Control via DMX 9 channels and buttons plus display on the unit itself Built in automatic show programmes Sound control Master slave mode 32 different patterns Two laser diodes with the corresponding mixed colour 150 RGY red green yellow 250 RVP red violet pink 200 GVC green violet cyan th mann MUSIC IS OUR PASSION 15 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively You can install the device on the wall ceiling or floor A mounting bracket is included in the package DANGER Laser radiation During installation follow the instructions in Laser safety basics on page 9 To avoid laser emission remove the safety key before you start to install the device th mann MUSIC IS OUR PASSION 16 Installation WARNING Stray laser radiation Inadequately secured additional components may cause stray laser radiation Make sure that all additional components are adequately secured WARNING Laser radia
15. roper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety th mann MUSIC IS OUR PASSION Laser safety basics Safety notes Laser safety requirements are based on DIN EN 60825 1 The corresponding accident preven tion regulation of the Accident Prevention and Insurance Association in Germany is BGV B2 This device contains a class 3B laser It is equipped with a safety key Always remove the key when the device is not attended by a trained operator As an operator you are responsible for the safety of all persons present Familiarize yourself with the laser safety regulations that apply in your country To ensure safe operation it is important to pay attention to the following instructions Prior to commissioning the company operator must appoint a qualified person as laser pro tection officer in writing and notify the operation of the laser equipment to the Accident Pre vention and Insurance Association and to the authority responsible for occupational safety In the event of public use the complete laser equipment must be approved by an expert e g the Technical Control Board TUV prior to commissioning th mann MUSIC IS OUR PASSION Safety notes Safety DANGER Danger for children
16. se rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast 0 to 359 fixed Z axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast Original pre programmed colour Red Violet DJ Lase Performance 150 RGY 250 RVP 200 GVC 41 Channel Value 96 127 128 255 200 GVC item no 255907 Channel 1 42 Value Mode selection 0 27 28 55 56 83 84 111 112 139 140 167 168 195 Function Pink Colour rolling Function Laser off Auto show green violet cyan Auto show green Auto show violet Auto show cyan Sound controlled show green violet cyan Sound controlled show green showlaser Channel Value 196 223 224 251 252 255 0 255 Zoom 0 127 128 169 170 209 210 255 X axis moving 0 127 128 191 192 225 Function Sound controlled show violet Sound controlled show cyan DMX mode This setting enables the function of the other DMX channels Pattern selection as shown in the pattern list 100 to 5 fixed zoom Zooming in effect speed increasing from slow to fast Zooming out effect speed increasing from slow to fast Zooming in and out effect speed increasing from slow to fast 128 different fixed positions on X axis Clockwise moving effect speed increasing from slow to fast Anti clockwis
17. skin burns In this context take extreme care when using converging optical instruments WARNING Eye damage caused by high light intensity Never look directly into the light source th mann MUSIC IS OUR PASSION 12 Safety notes WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights NOTICE Laser radiation risk of fire Keep the area exposed to laser radiation free from flammable substances NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames th mann MUSIC IS OUR PASSION 13 Safety notes NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire th mann MUSIC IS OUR PASSION 14 Features 3 Featu
18. tion safety switch required The laser beam must be defeatable any time during operation to avoid hazards by faults unsafe operation conditions or disturbance within the audience Therefore you have to connect a safety switch emergency shut off to the unit by which you can switch off the laser any time even from a remote observation point e g FOH position th mann MUSIC IS OUR PASSION 17 Installation WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a safety cable or a safety chain NOTICE Risk of overheating The distance between the light output and the illuminated surface must be more than 0 5 m 19 7 in Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F th mann MUSIC IS OUR PASSION 18 Installation NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers Safety switch emergency stop Connect the optional remote control safety switch to the socket 8 of the device An adapter for safety switches equipped with phone jacks is included in the delivery If you press the switch the laser beam will be
19. to show red Auto show pink Sound controlled show red violet pink Sound controlled show violet Sound controlled show red Sound controlled show pink DMX mode This setting enables the function of the other DMX channels Pattern selection as shown in the pattern list 100 to 5 fixed zoom Zooming in effect speed increasing from slow to fast Zooming out effect speed increasing from slow to fast DJ Lase Performance 150 RGY 250 RVP 200 GVC 39 Channel 40 Value 210 255 X axis moving 0 127 128 191 192 225 Y axis moving 0 127 128 191 192 255 Y axis rotation 0 127 128 191 192 255 Function Zooming in and out effect speed increasing from slow to fast 128 different fixed positions on X axis Clockwise moving effect speed increasing from slow to fast Anti clockwise moving effect speed increasing from slow to fast 128 different fixed positions on Y axis Clockwise moving effect speed increasing from slow to fast Anti clockwise moving effect speed increasing from slow to fast 0 to 359 fixed Y axis position Clockwise rolling effect speed increasing from slow to fast Anti clockwise rolling effect speed increasing from slow to fast showlaser Channel 7 Value X axis rotation 0 127 128 191 192 255 Z axis rotation 0 127 128 191 192 255 Colour selection 0 31 32 63 64 95 Function 0 to 359 fixed X axis position Clockwi
20. urn the laser beam off and remove the key Keep the safety key under control 2 Using the main switch 4 turn the device off 3 Optionally disconnect the device from the mains 6 th mann MUSIC IS OUR PASSION 33 Operation 7 4 Menu diagram th mann 34 7 5 Functions in DMX mode 150 RGY item no 255905 Channel 1 Value Mode selection 0 27 28 5 56 8 84 1 Tove 140 168 196 224 5 3 11 139 167 195 223 251 Function Laser off Auto show green red yellow Auto show red Auto show green Auto show yellow Sound controlled show green red yellow Sound controlled show red Sound controlled show green Sound controlled show yellow DJ Lase Performance 150 RGY 250 RVP 200 GVC 35 Channel 36 Value 252 255 0 255 Zoom 0 127 128 169 170 209 210 255 X axis moving 0 127 128 191 192 225 Y axis moving 0 127 Function DMX mode This setting enables the function of the other DMX channels Pattern selection as shown in the pattern list 100 to 5 fixed zoom Zooming in effect speed increasing from slow to fast Zooming out effect speed increasing from slow to fast Zooming in and out effect speed increasing from slow to fast 128 different fixed positions on X axis Clockwise moving effect speed increasing from slow to fast Anti clockwise moving effect speed increasing from slow to fast 128 different
Download Pdf Manuals
Related Search