DIABLO OVERDRIVE
Contents
1. HANDBUILT IN GERMANY WWW OKKO FX COM OKKOFXOGMX DE DIABLO OVERDRIVE USER MANUAL FEED has a double function as a pre gain control and affects the amount of bass in the input signal You know the problem an overdrive sound regardless of whether it s an amp or a pedal gets muddy rapidly if the input signal is bass heavy that s why the treble booster was invented The solution the Feed control thins out the signal when turned counter clock wise You ll hear the result right away even the fattest neck humbucker sounds transparent without ever getting muddy 1 2 o clock is a good starting point BODY takes affect on mids and compression Turn it to the left for a more transparent and open or the right for a fatter singing sound Actually could have called this knob FEEL GAIN controls the intensity of distortion Set it to the desired level of distortion and roll back the guitar volume for cleaner tones DIABLO GAIN only controls the 2nd gain level This control works in addition to the GAIN control If the gain is already set to maximum the doesn t add distortion anymore just a slight fattening of the sound TONE is useable throughout its whole range from dark to bright You can further fine tune the sound with the internal trimpots see below LEVEL I m sure you ll find out what this control does HEADROOM SWITCH activates an internal voltage doubling circuit LO for a sof2. ter tone and more compression good for pickups with low output and playing at bedroom level HI louder less compressed more dynamic and punchy sound with tighter bass better suited for more powerful pickups in front of an already distorting amp and for playing on stage volume INTERNAL TRIMPOTS PRESENCE controls the high frequencies Decrease for a smoother tone or increase for a cutting sound BASS controls the bass and lower mid frequencies POWER The Diablo can be run on a 9v battery or a power supply The power supply has to be a regulated 9VDC adapter with the 2 1 mm barrel plug and negative center pin standard for the very most pedals of Boss Ibanez Fulltone and many other pedals G The headroom switch activates an internal circuit that electronically doubles the supplied voltage i e 18 volts from a 9 volts battery or power supply DO NOT SUPPLY MORE THAN 9 VOLTS OR WRONG POLARITY you may damage the pedal DO NOT SUPPLY AC you will definitely damage the pedal
Download Pdf Manuals
Related Search