room air conditioner split type - user`s manual
Contents
1. Check that the condensation water can run off unhindered It may cause water damage if the condensation water cannot run off properly The air conditoner must be earthed in accordance with the local codes e For electrical safety purposes we recommend that you install an earth leakage circuit breaker lf the power cord is damaged it must be replaced by the manufacturer its service agent or similary qualified persons in order to avoid a hazard NAMES OF PARTS A Names of parts Indoor unit NOTE The indoor unit you purchased would like one of the following There is a slightly difference on front panel and display window but the features are the same For the models adopting quick couplings O O O Oo O auto defrost run er A Outdoor unit Air inlet rear Air inlet side G J 2 2 2 1 Indoor unit Outdoor unit 1 Front panel 11 Connective cable 2 Air inlet 12 Connective pipe 3 Air filter under the panel 13 Stop valve 4 Air outlet 14 Quick male coupling 5 Horizontal air flow grille NOTE 6 Mile air 7 louver inside All the pictures in this 7 Display panel manual are for explanation 8 Connecting pipe purpose only Your air 9 Drain hose conditioner may be slightly 10 Quick female coupling different The actual shape shall prevail NOTE This type of air conditioner provides aseries of front panel The indoor unit you purchased may be look like on2. is regulated while dehumidifying by repeating turning on and off of the cooling operation or fan only The fan speed is LOW Optimal operation To achieve optimal performance please note the following Adjust the air flow direction correctly so that it is not directed on people Adjust the temperature to achieve the highest comfort level Do not adjust the unit to excessive temperature levels Close doors and windows on COOL or HEAT modes or performance may be reduced Use TIMER ON button on the remote controller to select a time you want to start your air conditioner Do not put any object near air inlet or air outlet as the efficiency of the air conditioner may be reduced and the air conditioner may stop running Clean the air filter periodically otherwise cooling or heating performance may be reduced Do not operate unit with horizontal louvre in closed position Care and maintenance CARE AND MAINTENANCE Before mainatenance eTurn the system off before cleaning To clean wipe with a soft dry cloth Do not use bleach or abrasives NOTE Power supply must be disconnectd before cleaning the indoor unit ZX CAUTIONS Acloth dampened with cold water may be used on the indoor unit if it is very dirty Then wipe it with a dry cloth e Do not use a chemically treated cloth or duster to clean the unit e Do not use benz
3. to clear the registered hours otherwise the C indicator will display and flash again for another 15 seconds at the next time of starting the unit 12 Replacing filter reminding function Optional After 2880 hours of operation the indoor display window will display and flash nF this feature is a reminder to replace the Air Filter for more efficient operation After 15 seconds the system will revert back to the previous display again When the nF indicator appears and flashes please press the LED button on remote controller for 4 times or press the Manual control button for 3 or more times to clear the registered hours otherwise the nF indicator will display and flash again for another 15 seconds at the next time of starting the unit E Troubleshooting guide TROUBLESHOOTING TIPS Stop the air conditioner immediately if one of the following faults occur Disconnect the power and contact the nearest customer service center OPERATION RUN indicator or other indicators continue flashing and this flash can t be fixed by disconnecting the power and then connect it in again Fuse blows frequently or circuit breaker trips frequently Trouble Other objects or water penetrate the air conditioner The remote controller won t work or works abnormally If one of the following code appears on the display area E0 E1 E2 E8 or PO P1 P2 P3 Malfunctions Cause What sh
4. The design and specifications are subject to change without prior notice for product improvement Consult with the sales agency or manufacturer for details CS019U R16 2020001A4237 20141119 Before using your air conditioner please read this manual carefully and keep it for future reference SPLIT TYPE ROOM AIR CONDITIONER DO Oa AAA PN CONFORTFRESH AIR CONDITIONING USER S MANUAL Read This Manual Inside you will find many helpful hints on how to use and maintain your air conditioner properly Just a little preventative care on your part can save you a great deal of time and money over the life of your air conditioner You ll find many answers to common problems in the chart of troubleshooting tips If you review the chart of Troubleshooting Tips first you may not need to call for service CONTENTS SAFETY PRECAUTIONS Warming scr celeste eae thats tata a raat tanec ea act e a dat a 3 GC AUTION siceset EEEE E E E A E E A rant onatetwamesngn Abe Nesmaneues cube 4 NAMES OF PARTS IMGQOOR JUNI cit setececs Acs ccsveueesicewcchvuvacauoangenavasauncdcesouaaccewcualesiaetaaaaiaidencendstidcvundeandescavassstaieebannacnesarvande outdoor unit madd dication VAMP zseni a eaa erd N e aT Mibedcadsd salvage aTa 6 OPERATING INSTRUCTIONS Operating temperature iodinea eaea oa ira iE TE N a a cea awautes 7 Manual operatio sseisenirneaaien seinnse aE EAN AANA EAA EEEN NEE EAA AASTATE ANA ANANIA ESRAR 7 Airflow dire
5. angle of the horizontal louver should not be set too small as COOLING or HEATING performance may be impaired due to too restricted air flow area Do not move the horizontal louver manually otherwise the horizontal louver will be out of sync Please cease operating unplug power for a few seconds then restart the air conditioner 8 OPERATING INSTRUCTIONS How the air conditioner works SLEEP operation e 7 hours timer off Cooling SLEEP operation 7 hours timer off Set 1C 2F Temperature 1 2 F 1 I hour 1hour Heating AUTO operation When you set the air conditioner in AUTO mode it will automatically select cooling heating cooling heating models only or fan only operation depending on what temperature you have selected and the room temperature The air conditioner will control room temperature automatically round the temperature point set by you If the AUTO mode is uncomfortable you can select desired conditions manually SLEEP operation When you push SLEEP button on remote controller during cooling heating cooling amp heating models only or AUTO operation the air conditioner will automatically increase cooling or decrease heating 1 C 2 F per hour for the first 2 hours then hold steady for the next 5 hours after that it will switch off This characteristic maintains both enery saving and comfort in night operation DRYING operation The temperature
6. cause an electric shock 5 Install the air freshening filter back into position 6 Insert the upper portion of air filter back into the unit taking care that the left and right edges line up correctly and place filter into position Replacement of air filter and air freshening filter 1 Remove the air filter 2 Remove the air freshening filter 3 Install a new air freshening filter 4 Reinstall the air filter and securely close the front panel Preparation for extended non operation If you plan to idle the unit for a long time perform the following 1 Clean the indoor unit and filters 2 Operate the fan for about half a day to dry the inside of the unit 3 Stop the air conditioner and disconnect power 4 Remove the batteries from the remote controller The outdoor unit requires periodic maintenance and cleaning Do not attempt to do this yourself Contact your dealer or service provider Pre season inspection Check that the wiring is not broken off or disconnected e Clean the indoor unit and filters e Check that the air filter is installed Check if the air outlet or inlet is blocked after the air conditioner has not been used for a long time A Caution Do not touch the metal parts of the unit when removing the filter Injuries can occur when handling sharp metal edges Do not use water to clean inside the air conditioner Exposure to water can destroy the insulation lea
7. ction COMON cvsccsicacdiccesacndeardacsuateaeesdssadiecsinceadenn A i E E Aa 8 How the air conditioner WOKS cscsaccccacasasciccacestsscasccuncdadsesanesieadacencdacaattaccuscedieeasansiucesatncencdactaeas 9 CARE AND MAINTENANCE Before MainteNaNCe cies Geeta ates telah dete tid ND RR ROO Secs attest ca aidan adel ea a aaen 10 Cleaning the unit eee Cleaning the air filter and air freshening filter Replacement of the air filter and air freshening filter Preparation for extended non operation 00c0 0 11 Pre season INSPOCHOM si c ciacanccsccngsancnsteasansuneanesrsdnaasenes niaaa cons iaaa aea ras o aaa aerianas 11 TROUBLESHOOTING TIPS Normal function of the air conditioner Troubleshooting guide A 1 ED AOA NEEDS A TAAN N ENE AD ereere When using this air conditioner in the European countries please read the following information This appliance ican be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision DISPOSAL Do not dispose of this product as unsorted municipal waste Collection of such waste separately for special treatment is nec
8. densation Please sets the vertical air flow louver to its maximum angle vertically to the floor and set HIGH fan mode 3 Optimum performance will be achieved within these operating temperature Manual operation Units are equipped with a switch to run emergency operation mode It can be accessed by opening the front panel This switch is used for manual operation in case the remote controller fails to work or maintenance necessary Hold the panel sides and lift the front panel up to an angle until it remains fixed witha Panel clicking sound a Once you push the manual button the operation mode is shifted in an order as AUTO COOL OFF The temperature will be set at 24 C 76 F and the fan on Auto After operation close the panel firmly to its original position o AUTO COOL CAUTION Manual switch This switch is used for testing purposes only You had better not choose it To restore the remote controller operation use the remote controller directly Airflow direction control Vertical louver OPERATING INSTRUCTIONS Adjust the air flow direction properly otherwise it might cause discomfort or cause uneven room temperatures Adjust the horizontal louver using the remote controller Adjust the vertical louver manually To set the vertical air flow Up Down direction Perform this func
9. ding to possible electric shock When cleaning the unit first make sure that the power and circuit breaker are turned off Do not wash air filter with hot water at more than 40 C 104 F Shake off moisture completely and dry it in the shade Do not expose it directly to the sun it may shrink TROUBLESHOOTING TIPS Normal function of the air conditioner The following events may occur during normal operation 1 D Protection of the air conditioner Compressor protection e The compressor can t restart for 3 4 minutes after it stops Anti cold air Cooling and heating models only e The unit is designed not to blow cold air on HEAT mode when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached A When heating has just started B Defrosting C Low temperature heating e The indoor or outdoor fan stop running when defrosting Cooling and heating models only Defrosting Cooling and heating models only Frost may be generated on the outdoor unit during heat cycle when outdoor temperature is low and humidity is high resulting in lower heating efficiency of the air conditioner During this condition air conditioner will stop heating operation and start defrosting automatically The time to defrost may vary from 4 to 10 minutes according to the outdoor temperature and the amount of frost built up on the outdoor unit A white mist coming out from
10. e ON OFF button on the remote controller For the unit with Auto restart feature when the power restores the unit restarts automatically with all the previous settings preserved by the memory function For some models the machine is special designed with Auto restart function for the open angle of the horizontal louver Power failure during operation or pressing the ON OFF button on the remote controller will stop the unit completely When the power restores or pressing the ON OFF button on the remote controller again the unit restarts automatically with all the previous settings including the open angle of the horizontal louver by the memory function So we strongly suggest that the open angle of the horizontal louver should not be settoo small in case the condensedwater forms and drops fromthe horizontal louver Press the AUTO COOL button under the front panel and the open angle of the horizontal louver will be restored to the standard angle when the condensed water forms on the horizontal louver 11 Cleaning filter reminding function Optional After 240 hours of operation the indoor display window will display and flash CL this feature is a reminder to clean the Air Filter for more efficient operation After 15 seconds the system will revert back to the previous display again When the ov indicator appears and flashes please press the LED button on remote controller for 4 times or press the Manual control button for 3 or more times
11. e of the following BS o o o o auto defrost run timer Signal receptor 68 a D B 000 Defrost Auto Operation Timer C Operation a Defrost lt gt Timer Auto D 88 Q NAMES OF PARTS Indication lamp AUTO indication lamp This indicator illuminates when the air conditioner is in AUTO operation DEFROST Indication lamp kh For cooling amp heating model only This indicator illuminates when the air conditioner starts defrosting automatically or when the warm air control feature is activated in heating operation DIGITAL DISPLAY e Displays the temperature settings when e the air conditioner is operational e Displays the room temperature in FAN mode Displays the self diagnostic codes Displays the special functions in the following ways for some models only e Displays Qf for three seconds when e Timer ON Fresh Swing Turbo or Silence feature is activated Displays DF for three seconds when T e imer OFF is set Displays OF forthree seconds when e Fresh Swing Turbovor Silence feature is cancelled Displays dE under defrosting operation Displays eF when anti cold air feature is activated under heating mode Displays T during self clean operation if app
12. er a S e Never actuate any switches with a wet hand It may cause an electric shock Never use the device for any other purpose than the intended use Never place food precision instruments plants animals paint etc on the unit e Do not expose plants or animals directly to the air flow e Never clean the air conditioner with water Never use combustible cleaning agents as these could cause a fire or deformation e Never place any burning objects close to the device if they could be directly affected by the emitted air e Never step onto the outdoor unit and never place anything on it Never use an unsteady or rusty base Never install the air conditioner in places where combustible gas can be emitted Emmitted gas may collect and cause an explosion e Never allow the air conditioner to run for too long with the doors or windows open or if the humidity is very high on SAFETY PRECAUTIONS e f the air conditioner is to be used in conjunction with other heaters the air should be refreshed periodically otherwise there is a risk of lack of oxygen e Always pull out the power plug if the unit is not going to be used for any lengthy period of time Collections of dust can cause fire e Always switch off the air conditioner and pull out the power plug during a storm Electrical parts may get damaged e Check that the drainage line is correctly connected If not water will escape
13. essary It is prohibited to dispose of this appliance in domestic household waste For disposal there are several possibilities A The municipality has established collection systems where electronic waste can be disposed of at least free of charge to the user B When buying a new product the retailer will take back the old product at least free of charge C The manufacturer will take back the old appliance for disposal at least free of charge to the user D As old products contain valuable resources they can be sold to scrap metal dealers Wild disposal of waste in forests and landscapes endangers your health when hazardous substances leak into the ground water and find their way into the food chain SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage the following instructions must be followed Incorrect operation due to ignoring of instructions may cause harm or damage The seriousness is classified by the following indications WARNING This symbol indicates the possibility of death or serious injury a CAUTION This symbol indicates the possibility of injury or damage to property E Meanings of symbols used in this manual are as shown below Strictly prohibited Be sure to follow the instructions y o S e Do not extend the cable and never use multiple plugs A poor electrical connection poor insulation or voltage which is higher than per
14. ine thinner polishing powder or similar solvents for cleaning These may cause the plastic surface to crack or deform Never use water hotter than 40 C 104 F to clean the front panel it could cause deformation of discoloration Cleaning the air filter and air freshening filter A clogged air filter reduces the cooling efficiency of this unit Please clean the filter once every 2 weeks 1 Lift the indoor unit panel up to an angle untilit stops with a clicking sound 2 Take hold of the handle ofthe air filter and lift it up slightly to take it out from the filter holder then pull it downwards 3 Remove the AIR FILTER from the indoor unit Clean the AIR FILTER once two weeks Clean the AIR FILTER with a vacuum cleaner or water then dry it up in cool place 4 Remove the Air Freshening Filter from its support frame on some models The optional filter include Plasma Dust Collector Silver lon filter Bio filter Vitamin C filter 3M air purifier filter etc The removing and installation methods are slightly different see the pictures marked and on the left Clean the air freshening filter at least once a month and replace it every 4 5 months Clean it with vacuum cleaner then dry it in cool place CARE AND MAINTENANCE Air freshening filter Do not touch the Plasma Dust Collector Filter within 10 minutes after opening the front panel it may
15. licable Displays F P under 8 C heating operation if applicable OPERATION RUN indication lamp The indicator flashes once every second after power is on and illuminates when the air conditioner is in operation TIMER indication lamp The indicator illuminates when TIMER is set ON OFF OPERATING INSTRUCTIONS A NOTE This manual does not include Remote Controller Operations see the lt lt Remote Controller Instruction gt gt packed with the unit for details Operating temperature Mode i n z z i i Temperature Cooling operation Heating operation Drying operation 10 C 32 C 50 F 90 F Room temperature iese suse lt 21000Btu h models F 90F ERE Serer 32 F 86 17 C 32C 62 T 90T 221000Btu h models Outdoor temperature 18 C 43 C 11 C 43 C 52 F 109 F 64 F 109 F lt 21000Btu h models 5 C 43 C 23 F 109 F 7C 24C 18 C 43 C 64 F 109 F For the models with low 20 F 76F gt 21000Btu h models temperature cooling system 21C 52 C 70F 126F 21 C 52C 70T 1267 For special tropical models For special tropical models NOTE 1 If air conditioner is used outside of the above conditions certain safety protection features may come into operation and cause the unit to function abnormally 2 Room relative humidity less than 80 If the air conditioner operates in excess of this figure the surface of the air conditioner may attract con
16. mitted can cause fire Do not expose your body directly to the cool air for prolonged period Never poke fingers sticks or other objects in the air inlet and outlet vents e Never attempt to repair relocate modify the air conditioner yourself Always contact your service provider if required Never pull the plug out by pulling on the cable Hold the plug firmly and pull it out of the plug socket otherwise there is a risk of damaging the cable e Do not operate your air conditioner in a wet room such as a bathroom or laundry room WARNING Remove all dirt from the power plug and plug it firmly Soiled plugs can cause fire or an electric shock In the event of any abnormalities such as smell of burning immediately swithch off the device and pull the plug Contact your service provider Always switch off the device and pull the plug before you start to clean it Use specified power cord Contact the authorized installer for installation of this unit Contact an authorized service technician for repair or maintenance of this unit This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the air condition
17. mpressor will start again when the indoor temperature rises on COOL mode or falls on HEAT mode For cooling and heating models only to the set point e TROUBLESHOOTING TIPS 7 The air conditioner runs Anti mildew function after turning off the unit When turning off the unit under COOL AUTO COOL FORCED COOL and DRY mode the air conditioner will run Anti mildew function for about 10 minutes then stop the operation and turn off the unit automatically 8 Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity relative humidity higher than 80 Adjust the horizontal louver to the maximum air outlet position and select HIGH fan speed 9 Heating mode For cooling and heating models only The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heating operation When the outdoor temperature falls heat drawn in by the air conditioner decreases accordingly At the same time heat loading of the air conditioner increases due to larger difference between indoor and outdoor temperature If a comfortable temperature can t be achieved by the air conditioner we suggest you use a supplementary heating device 10 Auto restart function Power failure during operation will stop the unit completely For the unit without Auto restart feature when the power restores the OPERATION indicator on the indoor unit starts flashing To restart the operation push th
18. ould be done Unit does not start Power cut Unit may have become unplugged Fuse may have blown Wait for power to be restored Check that plug is securely in wall receptacle Replace the fuse Battery in Remote controller may have been exhausted Replace the battery The time you have set with timer is incorrect Wait or cancel timer setting Unit not cooling or heating Cooling heating Inappropriate temperature setting Set temperature correctly For detailed method please refer to Using remote control section models only room very well Air filter is blocked Clean the air filter while air flowing lout from the air conditioner Doors or Windows are open Close the doors or windows Air inlet or outlet of indoor or outdoor unit has been blocked Clear obstructions away first then restart the unit Compressor 3 or 4 minutes protection has been activated Wait If the trouble has not been corrected please contact a local dealer or the nearest customer service center Be sure to inform them of the detailed malfunctions and unit model Notes Do not attempt to repair the unit yourself Always consult an authorised service provider
19. the indoor unit e Awhite mist may generate due to a large temperature difference between air inlet and air outlet on COOL mode in an indoor environment that has a high relative humidity Awhite mist may generate due to moisture generated from defrosting process when the air conditioner restarts in HEAT mode operation after defrosting Low noise of the air conditioner e You may hear a low hissing sound when the compressor is running or has just stopped running It is the sound of the refrigerant flowing or coming to a stop You can also hear a low squeak sound when the compressor is running or has just stopped running This is caused by heat expansion and Cold contraction of the plastic parts in the unit when the temperature is changing e Anoise may be heard due to louver restoring to its original position when power is turned on Dust is blown out from the indoor unit This is a normal condition when the air conditioner has not been used for a long time or during first use of the unit A peculiar smell comes out from the indoor unit This is caused by the indoor unit giving off smells permeated from building material from furniture or smoke The air conditioner turns to FAN only mode from COOL or HEAT For cooling and heating models only mode When indoor temperature reaches the temperature setting on air conditioner the compressor will stop automatically and the air conditioner turns to FAN only mode The co
20. tion while the unit is in operation Use the remote controller to adjust the air flow direction The horizontal louver can be moved at a range of 6 for each press or swing up and down automatically Please refer to the REMOTE CONTROLLER OPERATION MANUAL for details To set the horizontal air flow direction left right Move the vertical louver manually to adjust the air flow in the direction you prefer IMPORTANT Before adjusting the vertical louvers the supply power must be disconnected For some models the vertical louver can be adjusted by using the remote controller Please refer to the REMOTE CONTROLLER OPERATION MANUAL for details NOTE Best working conditions the energy efficiency can be affected if not set under these conditions The best angle of louvers is the default angle of cooling mode e The best way of setting the angle of louvers at heating mode is run the unit for 5 minutes and then use the remote controller to set the louvers at the default angle of cooling mode CAUTION e Do not operate the air conditioner for long periods with the air flow direction set downward in cooling or dehumidifying mode Otherwise condensation may occur on the surface of the horizontal louver causing moisture to drop on to the floor or on furnishings When the air conditioner is started immediately after it was stopped the horizontal louver might not move for approximately 10 seconds e Open
Download Pdf Manuals
Related Search