Electro 196 II - Eliminator Lighting
Contents
1. Electro 196 II L E D 84 Red 51 Green and 60 Blue 2 8lbs 1 3kgs 6 14 H x 8 07 W x 6 8 D 2 Amp Supply Voltage 120V a 4 P Working Position Any Safe position Duty Cycle None DMX Channels 8 El XAR 0 196K Colors Multiple Colors Warranty 1 Year CAUTION Please read and Caution Never open unit when in use understand these instructions Always disconnect main power before before installing or operating replacing fuse Remember to always this unit replace with the exact same type fuse IS unit Operating Instructions The Electro 196 II has been tested at the factory there is no assembly required The unit is ready to be plugged into a power outlet This unit is a 8 channel DMX intelligent LED par can It can be run as a stand alone unit DMX controlled unit or in a Master Slave configuration While in Stand Alone or a Master Slave configuration you can run the auto mode sound active mode or control the colors and intensity manually For stand alone mode Master Slave configuration and DMX Control see other side 1 Year Limited Warranty Eliminator Lighting warranty is valid from the date of purchase Our 1 year limited warranty covers manufacturing defects only Serial number place of purchase with dated valid receipt must be submitted at time of service Eliminator Lighting warranty does not cover items or parts prone to wear and tear lamps fuses brushes and belts Eliminator Lighting warranty2. is only valid with in the United States Eliminator Los Angeles CA www EliminatorLighting com Stand Alone Manual Mode 1 Plug the fixture in dipswitch controls are as follows Dipswitch 1 is Red Dipswitch 2 is Green Dipswitch 3 is Blue Dipswitch 4 is Yellow Dipswitch 5 is Navy Blue Dipswitch 6 is Purple and Dipswitch 10 will change between Red Green and Blue 2 When dipswitches 1 2 3 4 5 6 or 10 are ON dipswitches 7 8 and 9 will control the intensity Stand Alone Auto Mode 1 Plug the fixture in and use dipswitches 7 8 and 9 to run Auto Mode and control the intensity Stand Alone Sound Active Mode 1 When all dipswitches are OFF the fixture will run in Sound Active Mode Master Slave Operation Auto Mode or Sound Active This function will allow you to link up to 16 units together and operate without a controller In Master Slave operation one unit will act as the con trolling unit and the others will react to the controlling units operation Any unit can act as a Master or as a Slave 1 Using standard XLR microphone cables daisy chain your units together via the XLR connector on the rear of the units Remember the Male XLR connector is the input and the Female XLR con nector is the output For longer cable runs we suggest a terminator at the last fixture 2 The dipswitch settings for Master Slave mode is as follows For Sound Active mode the Master unit must have all dipswitches in the Off po
3. o be off or strobing values 2 99 Eliminator Los Angeles CA www EliminatorLighting com
4. sition and the slave units dipswitch 1 On For Auto Mode the Master unit must have dipswitch 10 On and the slave units dipswitch 1 On Universal DMX Control This unit allows you to use any universal DMX 512 controller to control the different DMX traits A DMX controller allows you to create unique programs tailored to your individu al needs 1 The Electro 196 II Il uses eight DMX channels 2 To control your fixture in DMX mode follow the set up specifications that are included with your DMX controller 3 Set your desired DMX address using the dipswitches 4 Use the controller s faders to control the various DMX fixture traits 5 For longer cable runs more than a 100 feet use a terminator on the last fixture 6 For help operating in DMX mode consult the manual included with your DMX controller z CHANNEL 4 RED LED S GROUP 3 DMX TRAITS 0 255 INTENSITY 0 100 AE i amp MODES CHANNEL 5 GREEN LED S GROUP 1 eee o _ o 2 99 STROBING SLOW FAST ee ere 100 127 CLOSED CHANNEL 6 GREEN LED S GROUP 2 128 191 AUTO MODE SLOW FAST 0 255 INTENSITY 0 100 CHANNEL 2 RED LED S GROUP 1 0 255 INTENSITY 0 100 epee INTE Ye t00 CHANNEL 8 BLUE LED S GROUP 2 CHANNEL 3 RED LED S GROUP 2 0 255 INTENSITY 0 100 0 255 INTENSITY 0 100 When Channel 1 is between the values of 100 255 all other channels will not work To use chan nels 2 8 channel 1 either has t
Download Pdf Manuals
Related Search