33-10530 Manual - MCM Electronics
Contents
1. Supports HDMI 1 3 Video Audio format and HDCP 1 2 with video HDMI Interface encryption 30 meters Line of Sight LOS 5 1 5 9GHz with DFS function O T S 2 5mm Phone Jack External IR Build in Infrared Remote control IR function Blaster Receiver Module Working temperature 0 C 70 C 146 x 95 W x25 H each uni2. Limits Additional Provisions Part 15 Subpart E Unlicensed National Information Infrastructure Devices This device complies with relative criteria CE certification EN 60950 1 2006 Information technology Equipment Safety Part 1 General requirements EN 300440 01 V1 6 1 Electromagnetic compatibility and Radio spectrum Matters ERM Short range devices Radio equipment to be used in the 1 GHz to 40 GHz frequency range Part 1 Technical characteristics and test methods EN 301489 03 V1 4 1 Electromagnetic compatibility and Radio spectrum Matters ERM Electro Magnetic Compatibility EMC standard for radio equipment and services Part 3 Specific conditions for Short Range Devices SRD operating on frequencies between 9 kHz and 40 Ghz EN 301489 17 V2 1 1 Electromagnetic compatibility and Radio spectrum Matters ERM Electro Magnetic Compatibility EMC standard for radio equipment Part 17 Specific conditions for Broadband Data Transmission Systems EN 301893 V1 5 1 Broadband Radio Access Networks BRAN 5 GHz high performance RLAN Harmonized EN covering the essential requirements of article 3 2 of the R amp TTE Directive TRADEMARK INFORMATION TRADEMARK INFORMATION HDMI The HDMI Logo and High Definition Multimedia Interface are trademarks of HDMI Licensing LLC 2 Introduction 2 1 Overview The Model 33 10530 WHDI Video Transceiver System includes both a transmitter and receiv
3. Stellar abs WHDI Video Transceiver System Model 33 10530 User s Manual Table of Contents 1 Important information 1 2 Introduction 4 2 1 Overview 4 2 2 Main features 4 2 3 Packing Content 4 2 4 Control Functions 5 A Wireless HD transmitter 5 1 LED pattern on front panel 5 2 Interfaces on rear panel 5 B Wireless HD receiver 6 1 LED pattern on front panel 6 2 Interface on rear panel 6 3 Application Installation 7 8 4 Standby Function 8 5 Product Specifications 8 IMPORTANT INFORMATION Please read this user manual before you use the Stellar Labs 33 10830 Transmitter Receiver set It contains important operating information regarding the reliable use of this product Distributed Exclusively by MCM Electronics www mcmelectronics com Safety Precautions WARNING RISK OF ELECTRICAL SHOCK DO NOT OPEN WARMING TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE THE COVER NO USER SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED PERSONNEL A DANGER Be careful with electricity e Power to all connected products must be switched OFF before installation This includes televisions monitors projectors DVD players etc e To prevent electric shock be sure this unit is connected to the proper type of electrical outlet e Make certain the power cord is routed well so that it will not be stepped on or pinched by heavy items e Avoid overloading electrical outlets or extension cords as thi
4. e the HDMI interface is selected on the HDTV set Lr L L ws mum a Receiver s Projector pa HD LCD TY A WARNING Don t move the transmitter or receiver once they are connected LED Connection States Table x indicates LED is on indicates Green LED is flashing 6 Power Video Link Power Video Link ae ae ae C x x 4 Standby Function When the transmitter and receiver are both powered on the red LED will light immediately The green link LED will blink until the transmitter and receiver compete the link process The green link LED will then remain on When the HDMI source and HDMI monitor are both turned on the green video LED will light at this time the sender is sending the HDMI signal to the receiver If either the video monitor or video source is turned off after a time period of one minute the set will go into standby mode and the link LED will turn off On the side where the HDMI device was turned off the video LED will also turn off 5 Important Operation Notes IR Remote Control This set is capable of accepting IR commands at the receiver and sending them to the IR emitter plugged into the transmitter This enables source devices such as BluRay players cable or satellite boxes to be controlled at the location of the monitor or projector Note that the target for the IR control is on the front panel of the Wireless Receiver and this must be kept in mind when loca
5. er This set can transmit uncompressed 1080p 60Hz Deep Color A V signal up to 30m 98 The transmitter connects to the HDMI output of a variety of high definition devices including cable satellite or HD set top boxes Blu ray or DVD players game consoles and PC media centers The receiver is this connected to the HDMI input of any LCD LED DLP or plasma display or projector 2 2 Main features Operating frequency range 4 9 5 9GHz DFS function Compact portable size Build in Omni directional antennas Over 30m whole house range LOS with no latency IR remote control repeating 2 3 Package contents Immediately upon arrival check to verify the following items are included Main unit Sender and receiver set Pa d i E p nhs bs is _ l paltry ae al ma ha r a j m a Accessories 2 C a USB Cable A A Users manual IR emitter al 2 AC Adaptors 5V 3A User Manual 2 4 Control functions A Transmitter Tie J ii S Link LED video LED USB Interface Power LED Power LED Red indicates power on Video LED Green indicates HDMI connection is established Link LED Green indicates Wireless link between sender and receiver is established USB Slot used for firmware upgrade Interface on rea
6. r panel HOM Interface DC IN Jack DC Jack For connection of power adaptor IR Slot For connection of included IR emitter HDMI Interface input For connection of HDMI media source B Receiver Remote Sensor atthe back ofthe window lt ea E Ey Li o 2 _ Te lt as n pa P Egr s m il ian O a Link LED Video LED USB Interface Power LEQ Power LED Red indicates power on Video LED Green indicates HDMI connection is established Link LED Green indicates Wireless link between sender and receiver is established USB Slot used for firmware upgrade Interfaces on rear panel SS es aa a lt _ooc SoS gt oo cS SS Ss Ds e SS CS oS oS ee SS oS oS SS ee ee ppe HOMI Interlace DGIN Jask DC Jack For connection of power adaptor HDMI Interface output For connection to HDMI monitor television or projector 3 Application Installation Set up the connection of the Transmitter and Receiver Connect the transmitter multimedia player with HDMI cable Connect Infrared IR extender blaster to WD 200T and player device Stick the Blaster head to player device IR receive window mg E ee ee ee a 2 m Haih i F ee et r 1 Fe Serer O whe i Transmitter i 3 l ND rhea ja i jja Dim Rap OYO Pirm 2 Connect the receiver to the monitor or projector with the HDMI cable and make sur
7. s could result in electric shock or fire e For protection from lightning if this unit will be left unattended for a long period of time it should be disconnected from the power source WARNING e This product should not be exposed to moisture Objects containing liquids should not be placed on the product e Put the receiver transmitter in a property ventilated area away from direct sunlight or any source of heat e To reduce the risk of fire or electric shock do not expose the receiver transmitter to rain or moisture SPECIAL NOTICE This product should not be used in airports or medical facilities where potential interference with critical equipment could occur e This product should not be used in locations where wireless signal causes abnormal video or audio interference 1 Place it on the table or desk steadily Don t try to move it when connected 2 This device should stay away from refrigerator washing machine or other metal furniture and crowded locations e This product has been tested and manufactured to comply with national safety rules However there is no guarantee that interference will not occur in some particular installations e This device is susceptible to interference from 5GHz wireless devices such as routers e Optimal Range between transmitter and receiver is 30m open area 2 DECLARATION OF CONFORMITY This device complies with Part 15C and Part 15E of FCC Rules Part 15 Subpart C Radiated Emission
8. ting the receiver near the monitor Note that the IR remote control does not function while the units are in Standby mode If you are at the location of the monitor or projector that monitor or projector must be turned on to wake the wireless transmitter and receiver from Standby mode Then the IR extender will function properly Syncing the Transmitter and receiver Once the transmitter and receiver are linked it is not advised to move or relocate either unit If the receiver located at the monitor or projector is left in standby mode and power is interrupted at the transmitter for example to move it from a BluRay player to a PC or laptop it may be necessary to reset power to both the receiver and transmitter in order for them to link to each other Use with laptop computers Many laptop computers will automatically deactivate the HDMI output while the output is not in use When connecting the laptop to the HDMI Transmitter it may be necessary to check the laptop to ensure the HDMI output is activated Range Typical range of this device is 30m 98 based on open line of sight LOS installation This unit is capable of transmitting through walls and floors of most residences however overall range will be decreased In cases of range issue it is best to locate the transmitter and receiver in open areas with few obstructions General Specifications Supported Video Resolution 1080p 720p 1080i 576i 576p 480p
Download Pdf Manuals
Related Search