User`s Manula & Operating Instructions
Contents
1. key and the sensitivity will be changed from dE1 dE2 dEN3 dE4 dE5 dE6 and dE7 the default setting is dEN4 Please note Q For the sensitivity of counterfeit detection the smaller the number the higher the sensitivity a If mis alarm frequently occurred please decrease the sensitivity of counterfeit detection i e increase the number if the machine M2300U User s Manual amp Operating Instructions 9 often fails to report the dubious notes please increase the sensitivity i e decrease the number 2 5 Memory of the last setting The currency counter has the function of automatically saving the parameters of the last setting When each function and its parameters have been set press the START RESET key and the present setting is saved The machine will be working under the new setting after being turned on next time 10 M2300U User s Manual amp Operating Instructions 3 Error Codes and their elimination 3 1 Error codes displayed after the self test of the machine their meanings and their elimination Emor Code Eror Position Einenon FE1 FE2 FE3 FE4 FES FE6 FE7 FE8 FE9 Feeding Sensor Left Counting Sensor Right Counting Sensor Clear the dust and turn on the machine again Stacker Sensor Speed Sensor UV Sensor Left Magnetic Sensor Right Magnetic Sensor Check the corresponding magnetic head Middle Magnetic Sensor M2300U User s Manual amp Operating Instructions 112. 3 2 When the machine stops upon the detection of dubious banknote the error codes and their elimination are as follows Take out the half note and press HF X Half note START RESET to continue the counting Check the notes mis alarm could occur if db X Double bills the notes are very old press START RESET to count the bills again Take out the banknotes on the stacker CH X Chain notes put on the input hopper and press START RESET to count the bills again Take out the shorter longer note and dd X Notes of different denomination press START RESET to continue the counting Take out the banknotes on the stacker JA Jamming put on the input hopper and press START RESET to count the bills again Take out and check the dubious note SU X UV suspected note and press START RESET to continue the counting Take out and check the dubious note Sd X Magnetic suspected note and press START RESET to continue the counting Both UV and M ti ted Take out the counterfeit note and press D j E EEE START RESET to continue the counting Please note a The number behind the error code shows the credibility of the detection of the dubious notes The bigger the number the higher the credibility When the machine stops and alarms when counting the first three banknotes they should be taken out of the stacker put back to the input hopper and count again by pressing the START RESET
3. 12 M2300U User s Manual amp Operating Instructions 4 Repair and Maintenance Give the machine everyday cleaning and a thorough cleaning to the surface of the sensors and the parts inside every week M2300U User s Manual amp Operating Instructions 13 Notes 14 M2300U User s Manual amp Operating Instructions Notes M2300U User s Manual amp Operating Instructions 15 Notes 16 M2300U User s Manual amp Operating Instructions
4. Total TOTAL POS TWEIGH INTERNATIONAL LT M2300U Bank Note Counter United Kingdom Revision O February 2006 M 8 0 ISO 9001 Registered INTERNATIONAL To Certificate No 10976 M2300U Bank Note Counter User s Manual amp Operating Instructions M 8 0 Copyright 2006 Total Postweigh International Ltd United Kingdom Revision O February 2006 Total Postweigh International Ltd 1 Skelgillside Alston Cumbria CA9 3TR www postweigh com Tel 44 1434 381182 Fax 44 1434 382035 All trademarks in this guide are acknowledged and are the property of their respective owners 2 M2300U User s Manual amp Operating Instructions Important Information Please read this instruction manual carefully before the operation Notice a Reliable grounding is required for the socket connected with the machine a The voltage of the power supply connected with the machine should be within the stipulated range a Please turn off the machine and pull out the plug when opening the back cover of the machine or cleaning the dust M2300U User s Manual amp Operating Instructions 3 1 General Introduction Thank you for choosing currency counter Model M2300U The following specifications are for your better understanding of the machine 4 DOU O OU O DOUDB Counting speed Countable paper size Thickness Detection of suspected notes Display modes Preset Batch Number Input Hopper Capacit
5. e adjusted For the details of operation please refer to Section 2 4 2 3 2 Speed adjustment The machine gives the user 4 speed levels to choose from including 600pcs m 900pcs m 1200pcs m and 1500pcs m To choose the desired speed press the function key SPEED Generally to make the machine works under the best condition 900pcs m is recommended as the default speed Please note when counting under 1500pcs m the indicator light of magnetic detection is automatically off and the machine will not conduct the magnetic detection 2 3 3 Accumulation of effective counting value Press the key the indicator light above is on and the count display will show the total of all the effective counting value i e except for the dubious bill which is not counted into the effective value since the machine is turned on And the machine will continue to count from the total value 2 3 4 Batch presetting The batch presetting can be achieved by directly pressing the keys on the batch keypad When the batch number is reached the machine will stop for the user to take out the bills and so that it can continue the batch operation Please note a Continuous batch counting is only applicable under the state of auto counting a The preset batch under manual counting can only do the batch counting for one time 8 M2300U User s Manual amp Operating Instructions 2 3 5 Batch number clearance Press CLEAR key to clear the prese
6. on 2 2 1 Front panel operation 1T10190101 01 OIS OAO OO a Batch keypad The ten batch keys are to set the batch number the user desires And the CLEAR key is to clear the batch number on the parameter batch display a Main Function keys UV MG START RESET SPEED D MANUAL gt w to detect the UV or magnetic or both suspected banknote during the process of counting to withdraw from the state of parameter presetting to clear the count display to 0 and to start the manual counting to set the counting speed to accumulate all the effective value on the count display the machine is within the adding mode when the indicator light above is on to switch ON and OFF the manual counting function The machine is within the manual counting mode when the indicator light above is on 6 M2300U User s Manual amp Operating Instructions a Auxiliary function keys Press 7 on the batch keypad for four times to enter the auxiliary function setting to adjust the sensitivity of UV detection to adjust the sensitivity of magnetic detection to set the sensitivity of paper width to adjust the sensitivity of paper density 2 2 2 How to position the feeding chink adjusting knob with a coin a Turn the coin clockwise to to enlarge the feeding chink counter clockwise to to decrease the feeding chink a When the bills can not be counted smoothly enlarge the feeding chink
7. t batch number on the batch parameter And the machine withdraws from the batching state 2 4 Setting the auxiliary functions Press 7777 i e 7 for four times to change the parameters of the machines and the batch parameter display will show SEt 2 4 1 Press 1 to enter the setting of UV detection The sensitivity of UV detection is adjustable by continuously pressing the 1 key and the sensitivity will be changed from SU1 to SU15 the default setting is SU7 The smaller the number follows SU the higher the sensitivity of UV detection 2 4 2 Press 2 to enter the setting of Magnetic detection The sensitivity of Magnetic detection is adjustable by continuously pressing the 2 key and the sensitivity can be changed from Sd1 to Sd15 the default setting is Sd7 The smaller the number follow Sd the higher the sensitivity of Magnetic detection 2 4 3 Press 3 to enter the setting of width difference of the banknotes The sensitivity of width difference detection is adjustable by continuously pressing the 4 key and the sensitivity will be changed from dd1 dd2 dd3 dd4 dd5 dd6 and dd7 the default setting is dd4 When the width difference between the bills is detected to be over the set parameter the machine alarms and stops counting 2 4 4 Press 4 to enter the setting of banknotes density The sensitivity of banknote density is adjustable by continuously pressing the 4
8. to when the machine stops with signals like db CH displayed decrease the feeding chink to Please note don t rotate the adjusting knob to a large degree and only the inching movement is applicable 2 2 3 How to adjust the paper guide a The width of the paper guide should be in accordance with that of the bills that the machine is to count a When there s width difference between the bills please adjust the paper guide to suit the present width of the bills so as to avoid mis alarm 2 3 Setting the main functions 2 3 1 Counterfeit detection After the self test for two seconds the machine proves to be in the normal condition and both the indicator lights for UV and magnetic counterfeit detection are on Press the key the indicator light of MG is turned off and the machine counts with UV detection function only Press again both the indicator lights of UV and MG are turned off the machine counts without counterfeit detection Press the key the 3 third time both the counterfeit indicator lights are on showing the function of counterfeit detection through UV and magnetic ink is enabled M2300U User s Manual amp Operating Instructions 7 Please note a It is suggested that the first note of the bill bundle should be a 70 new bill without pollution so as to be considered as the standard for auto identification a The sensitivity of the two methods of counterfeit detection can b
9. y Output Stacker Capacity Dimensions Net weight Power supply 600 900 1200 and 1500 pcs m 50 x 110 95 x 185 mm 0 07 0 2 mm Half notes double notes chain notes UV and magnetic suspected notes Four digit LED count display Three digit LED parameter batch display Ten digit numeric key pad Approx 200 bills 350 bills with extension clips Movable guides Approx 200 bills 265 x 235 x 190 mm 6 5 KGS 220V 50HZ or 110V 6OHZ as per user s requirement M2300U User s Manual amp Operating Instructions 2 Operation 2 1 Turning on the machines Please ensure that the power supply you are using is with the same parameter as the ones on the back of the machine The machine will proceed automatic checkout for 2 two seconds If the machine is in normal condition the count display shows 0 Put the bills on the input hopper the machine will automatically start to count Please note a When the code signals are displayed during the process of turning on the machine and counting bills please adjust them with reference to 3 1 a With memory chips installed the parameter setting of the machine is out of your own choice The default configuration are Auto counting add function Is disabled auto recognition of different width counting speed 900 notes per minute and the magnetic and UV detection are on M2300U User s Manual amp Operating Instructions 5 2 2 General Operati
Download Pdf Manuals
Related Search