User`s Manual
Contents
1. User s Manual RP 916 Panel Protector for EIZO 54 cm 21 3 inch class LCD Monitors Surface of the panel protector catches the dirt dust or finger prints easily Please use the enclosed gloves while installing and removing the panel protector Please use the supplied masking tape and be careful not to scratch the LCD panel or the cabinet with the panel protector during installation Also please do not remove the panel protector often It may scratch or result in damage to the LCD panel When using LCD monitor with optional panel protector it is preferable to avoid using downwards In this condition the panel protector might become bend or slip out from the monitor If using the Integrated Front Sensor after installation of a panel protector be sure to execute correlation using RadiCS RadiCS LE Refer to each User s Manual for details Installation Before installation please remove dust and stains from the LCD panel Separator Tape blue 1 Strip the tape from the separator and adhere it on each edge of the cabinet on the right and left Adhere the tape on long sides of the cabinet 2 Set the panel protector into the grooves of the panel frame the lower first 1 then the upper 2 The panel protector has a cut to fit on the sensor Align the cut with the sensor position when installing the panel protector If installed in the wrong orientation the sensor may be damaged 3 With the enclosed tool Lever se2. r for Panel Protector Gloves Cleaning Cloth User s Manual Masking tape 4 pieces 2 sets ELZLI EIZCI Corporation 153 Shimokashiwano Hakusan Ishikawa 924 8566 Japan Phone 81 76 277 6792 Fax 81 76 277 6793 EIZCEI Europe GmbH Helmut Grashoff Strasse 18 41179 M nchengladbach Germany Phone 49 2161 8210210 Fax 49 2161 8210150 EIZO t T 924 8566 XII ELT 13 Bit http www eizoglobal com http www eizo co jp Copyright 2015 EIZO Corporation All rights reserved 1st Edition November 2015 Printed in Japan OONOL944A1 U M RP916 AL
3. t the tabs of the panel protector into the side grooves 4 tabs Put the lever on the tabs of the panel protector and move it toward the LCD panel to install Position the protector into the LCD panel tightly without leaving an opening 4 Strip the tape from the cabinet Removing Put the lever on the tabs of panel protector and move it toward the cabinet to remove Cleaning This product comes with a special cleaning cloth designed to remove stains from the panel If necessary stubborn stains can be removed by moistening part of the cloth with water to enhance its cleaning power Please be sure to keep the panel protector immobilized while cleaning it Otherwise it may scratch the surface of the LCD panel To hold the panel protector by hand use gloves or a soft cloth to avoid dust or finger prints Chemicals such as alcohol and antiseptic solution may cause gloss variation tarnishing and fading of the cabinet or panel and also quality deterioration of the image Never use any solvents or chemicals such as thinner benzene wax and abrasive cleaner which may damage the cabinet or panel Tips The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface Specification Surface treatment Anti Reflective Coating Both sides Coating strength Reflectivity Less than 1 Light transmission More than 95 0 96 Dimension Weight 436 3 mm W x 328 4 mm H x 1 2 mm D Approx 210 g Accessories Leve
Download Pdf Manuals
Related Search