Analog 7`` Square (Hotplate) Magnetic Stirre
Contents
1. 12300085 Analog 7 Square Hotplate Magnetic Stirre User Manual MS7 S Analog 7 Square Plate Magnetic Stirrer MS7 H550 S Analog 7 Square Hotplate Magnetic Stirrer Please read the User Manual carefully before use and follow all operating and safety instructions www scilogex com SCILOGEX Contents Preface Service Warranty 1 Safety Instructions 2 Sper use 3 Inspection 3 1 Receiving Inspection 3 2 Listing of Items 4 Control and Display 4 1 Control Elements 5 Trial Run 6 Faults 7 Maintenance and Cleaning 8 Associated Standards and Regulations 9 Technical Data 10 Ordering Information OmMmANANIADANAANA nA A UY DN N N o Analog 7 Square Hotplate Magnetic Stirrer Preface Welcome to the Analog 7 Square Hotplate Magnetic Stirrer Users should read this Manual carefully follow the instructions and procedures and be aware of all the cautions when using this instrument Service When help needed you can always contact the Service Department of manufacturer supplier for technical support in the following ways SCILOGEX LLC 500 Four Rod Road Suite 122 Berlin CT 06037 USA Tel 1 860 828 5614 Fax 1 860 828 5389 E mail info scilogex com Website Http www scilogex com Please provide the customer care representative with the following information e Serial number on the rear panel e Description of problem i e hardware or software e Methods and procedures adopted2. RT 550 Hotplate model Max power input of motor W 18 Temperature display C Scale Hotplate model Max power output of motor 10 The safety temperature range 100 580 Hotplate model W of the hotplate C Analog 7 Square Hotplate Magnetic Stirrer Dimensions mm Weight kg 5 3 Permitted ambient temperature C 5 40 Permitted relative humidity 80 Stection class acc to DIN 60529 IP21 RS232 interface Yes 215 360 112 Table 3 10 Ordering information Cat No Descriptions 813221009999 813221019999 MS7 H550 S Analog 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate USA plug 110V 50Hz 60Hz MS7 H550 S Analog 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate Cn plug 220V 50Hz 60Hz 813221029999 813221039999 MS7 H550 S Analog 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate Euro plug 220V 50Hz 60Hz MS7 H550 S Analog 7 Square Hotplate Magnetic Stirrer glass ceramics hotplate UK plug 220V 50Hz 60Hz 813211009999 MS7 S Analog 7 Square Plate Magnetic Stirrer glass ceramics plate USA plug 110V 50Hz 60Hz Analog 7 Square Hotplate Magnetic Stirrer MS7 S Analog 7 Square Plate Magnetic 813211019999 Stirrer glass ceramics plate Cn plug 220V 50Hz 60Hz MS7 S Analog 7 Square Plate Magnetic 813211029999 Stirrer glass ceramics plate Euro plug 220V 50Hz 60Hz MS7 S Analog 7 Square P
3. ctory default setting e Temperature can switched on not reach set point Check whether the safety temperature value is set too low e Stir speed can not reach set point Check whether the stirring bar breakaway monitoring is ON Excessive medium viscosity may cause abnormal speed reduction of the motor e Heating or stirring function do not start when knob is pressed Check whether the unit is in the mode setting program Exit from the mode setting and restart the heating stirring functions Lf these faults are not resolved please set the instruments to factory default setting or take the unit to technical service center Analog 7 Square Hotplate Magnetic Stirrer 7 Maintenance and Cleaning Proper maintenance can keep instruments working properly and lengthen its lifetime Do not spray cleanser into the instrument when cleaning Unplug the power line when cleaning Only use recommended cleansers Dyes Isopropyl alcohol Water containing tenside Isopropyl Construction materials alcohol Water containing tenside Isopropyl ti Cosmetics alcohol Foodstuffs Water containing tenside Fuels Water containing tenside Wear the proper protective gloves during cleaning of the instrument Before using other method for cleaning or decontamination the user must ascertain with the manufacturer that this method will not harm the instrument Analog 7 Square Hotplate Magnetic Stirrer Send in th
4. e case of service the instrument back in the packaging carton Storage packing is not sufficient for the back dispatch Use additionally a suitable transportation packing The enamel makes the hotplate easier to care for and more resistant to acids and bases Because of it however the hotplate is also more susceptible to extreme fluctuations in temperature and the force of impact This can result in cracks forming or the coating flaking off Warning Cut off power when maintenance and cleaning 8 Associated standards and regulations Construction in accordance with the following safety standards EN 61010 1 UL 3101 1 CAN CSA C22 2 1010 1 EN 61010 2 10 Construction in accordance with the following EMC standards EN 61326 1 Associated EU guidelines EMC guidelines 89 336 EWG Instrument guidelines 73 023 EWG e The above standards will be available from July 2011 9 Technical data Analog 7 Square Hotplate Magnetic Stirrer Speed range rpm 0 1500 Voltage VAC 100 120 200 240 Rotary speed display Scale Frequency Hz 50 60 Speed display accuracy rpm 1 Power W un model Hotplate material Glass ceramic Stirring point position quantity 1 Dimensions of workplate mm 184 184 Max stirring quantity H20 1 20 Dimensions of heating mm 176 176 Max magnetic bar L mm 80 10 Heating power W 1000 Hotplate model Motor type Brushless motor Temperature range C
5. ent in explosive atmospheres with hazardous substances or under water Gradually increase the speed reduce the speed if Stirring bar breaks away due to high speed The instrument is not running smoothly or container moves on the base plate Temperature must always be set to at least 50 C lower than the fire point of the media used Be aware of hazards due to Flammable materials or media with a low boiling temperature Overfilling of media Unsafe container Process pathogenic materials only in closed vessels Check the instrument and accessories prior to each use Do not use damaged components Safe operation is only guaranteed with the accessories described in the Accessories chapter Accessories must be securely attached to the device and can not come off by themselves Always disconnect the plug before fitting accessories Ensure that the external temperature sensor is inserted in the media to a depth of at least 20 mm When using metal vessels do not place the temperature sensors on the bottom of the vessel This can cause media Analog 7 Square Hotplate Magnetic Stirrer excessively high temperatures to be measured especially in with poor conductivity e The tip of the measuring sensor must be at least 5 mm from vessel bottom a distance of 10 mm is ideal e The instrument can only be disconnected from the main power supply by pulling out the main or the connector plug e The voltage stated on the label must c
6. he a tirring function i itched Speed control Knob Sy stirring function is switche ON or OFF by pushing the knob Set the rated temperature The Temperature control knob heating function is switched Hotplate LED BEM Hotplate LED Safe temperature control Knob ON or OFF by pushing the knob When the heating function is switched ON the LED Heat is lit When the stirring function is switched ON the LED Stir is lit Set safety temperature stop heating when exceed secure temperature Power Switch Switch ON or OFF the instrument Table 2 Trial run Make sure the required operating voltage and power supply voltage match Ensure the socket must be properly grounded Plug in the power cable ensure the power is on and begin initializing Add the medium into the vessel with a stirring bar Place vessel on the work plate Set the rated stirring speed and begin Set the rated temperature and start heating Begin the heating and stirring functions If these operations above are normal the device is ready to operate If these operations are not normal the device may be damaged during transportation please contact manufacturer for technical support 6 Faults e Instruments can not be power ON Check whether the power cable is plugged in Check whether the fuse is broken or loose e Fault in power on self test Switch OFF the unit then switch ON and reset the instruments to fa
7. late Magnetic 813211039999 Stirrer glass ceramics plate UK plug 220V 50Hz 60Hz Accessories MS135 2 Red quarter pie 11 holes 4 ml 18900002 reaction vessel 015 2mm 20mm depth MS135 3 Purple quarter pie 4 holes 20 18900003 ml reaction vessel 28mm 24mm depth 18900004 MS135 4 Blue quarter pie 4 holes 30 ml reaction vessel 28mm 30mm depth 18900005 MS135 5 Black quarter pie 4 holes 40 ml reaction vessel 28mm 43mm depth 18900048 MS135 6 Green quarter pie 6 holes 8ml reaction vessel 17 75mm 26mm depth 18900049 MS135 7 Golden quarter pie 4 holes 16ml reaction vessel 21 6mm 31 7mm depth Table 4 SCILOGEX LLC 500 Four Rod Road Suite 122 Berlin CT 06037 USA Tel 1 860 828 5614 Fax 1 860 828 5389 E mail info scilogex com Website Http www scilogex com
8. orrespond to the main power supply e Ensure that the main power supply cable does not touch the hotplate Do not cover the device e The instrument may only be opened by experts e Keep away from high magnetic field 2 Proper use The instrument is designed for mixing and or heating liquids in schools laboratories or factories e Observe the minimum distances between the devices between the device and the wall and above the assembly min 100 mm gt 100mm This device is not suitable for using in residential areas or other constraints mentioned in Chapter 1 3 Inspection 3 1 Receiving Inspection Unpack the equipment carefully and check for any damages which may have arisen during transport Please contact manufacturer supplier for technical support Note If there is any apparent damage to the system please do not plug it into the power line 3 2 Listing of Items The package includes the following items Item Qty Main unit 1 Power cable 1 User Manual 1 Table 1 Analog 7 Square Hotplate Magnetic Stirrer 4 Control 4 1 Control elements LED Heat Hotplate model l i Heating Knob Hotplate model Stirring Knob Safe Temperature Button LED Stir Figure 1 ji I l A IT MINO Ne a Kt Power Switch Figure 2 Analog 7 Square Hotplate Magnetic Stirrer Items Default settings Set the rated rotary speed T
9. to resolve the problems e Your contact information Warranty You have purchased a Scilogex instrument This instrument is warranted to be free from defects in materials and workmanship under normal use and service for a period of 24 months from the date of invoice The warranty is extended only to the original purchaser It shall not apply to any product or parts which have been damaged on account of improper installation improper connections misuse accident or abnormal conditions of operation For claims under the warranty please contact your local supplier You may also send the instrument directly to manufacturer enclosing the invoice copy and by giving reasons for the claim 1 Safety Instructions Warning e Read the operating instructions carefully before use e Ensure that only trained staff works with the instrument Risk of burn e Caution when touch the housing parts and A the hotplate which can reach temperature of 550 C e Pay attention to the residual heat after switching off Protective ground contact e Make sure that socket must be grounded protective ground contact before use When working wear personal safety guards to avoid the risk from Splashing and evaporation of liquids Release of toxic or combustible gases Set up the instrument in a spacious are on a stable clean non slip dry and fireproof surface Do not operate the Analog 7 Square Hotplate Magnetic Stirrer instrum
Download Pdf Manuals
Related Search