19 inch HC series TFT LCD Monitor
Contents
1. infig 4 mn Contrast Adjusts screen contrast by using the buttons lt or gt fig 4 Image Control Ea RE AA Auto Adjustment Automatically selects the optimal settings for image parameters image position phase etc by using the V POSITION button MENU fig 4 Position Controls the 5 horizontal position Position Controls the picture s vertical position Clock Sets up the internal clock Larger values make the displayed image appear wider smaller values make it appear compressed Phase Adjusts the internal clock s time lag in order to optimize the screen image lt gt ADJUST MENU ENTER AUTO EXIT Color AZ R Exit This menu lets you select a preset color temperature 9300 6500 by pressing the OSD buttons lt or gt and in fig 4 Changes to the color temperature take immediate effect on screen If you wish to set individual color values select the Custom Color option Then press the MENU button in fig 4 to select the red green and blue settings and set the desired value using the OSD buttons lt or gt and in fig 4 The current settings are automatically saved when you return to the previous level or exit the OSD menu User s Manual OSD Diagram OSD Description OSD Control Ed FIRB AA R Exit H OSD Position Controls the OSD menu s horizontal position 080 POS2. ENTER 1 Active OSD menu or function adjust confirm or 2 Exit OSD menu when in volume OSD status Volume lt gt 1 Activates the volume control when the OSD is OFF 2 Navigate through adjustment icons when OSD is ON or adjust a function when function is activated Auto Adjust button When OSD menu is in off status press this button to activate the Auto Adjustment function The Auto Adjustment function is used to optimized the H Position V Position Clock and Focus NOTES Do not install the monitor in a location near heat sources such as radiators or air dusts or in a place subject to direct sunlight or excessive dust or mechanical vibration or shock Save the original shipping box and packing materials as they will come in handy if you ever have to ship your monitor For maximum protection repackage your monitor as it was originally packed at the factory To keep the monitor looking new periodically clean it with a soft cloth Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution Never use strong solvents such as thinner benzene or abrasive cleaners since these will damage the cabinet As a safety precaution always unplug the monitor before cleaning it User s Manual HOW TO ADJUST A SETTING OSD Diagram OSD Description BRIGHTNESS CONTRAST Brightness Contrast adjustment Fo RB AT R Brightness Adjusts brightness by using the buttons lt gt
3. device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operations CANADA This Class digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulation This device complies with requirement of EMC directive 89 336 EEC with regard to Electromagnetic Compatibility and 73 23 EEC and 93 68 EEC with regard to Low Voltage directive Socket outlet shall be installed near the equipment and shall be easily accessible User s Manual Congratulations The display you have just purchased carries the TCO 03 Displays label This means that your display is designed manufactured and tested according to some of the strictest quality and environmental requirements inthe world This makes fora high performance product DISPLAYS designed with the user in focus that also minimizes the impact on our natural environment some of the features of the TCO 03 Display requirements Ergonomics e Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems Important parameters are luminance contrast resolution reflectance colour rendition and image stability Energy e Energy saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields Noise emi
4. 19 inch HC series TET LCD Monitor 1855 USER S MANUAL User s Manual Before operating the monitor please read this manual thoroughly This manual should be retained for future reference FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help The device complies with Parts 15 of the FCC Rule Operation is subject to the following two conditions 1 this
5. AND PLAY 16 TECHNICAL SUPPORT 18 amp A FOR GENERAL DEFECTIVE 18 ERROR MESSAGE amp POSSIBLE 19 CONNECTOR PIN ASSIGNMENT 20 User s Manual SAFETY NOTICE The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference WARNING To prevent fire or shock hazard do not expose the monitor to rain or moisture Dangerously high voltages are present inside the monitor Do not open the cabinet Refer servicing to qualified personnel only PRECAUTIONS Do not use the monitor near water e g near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Do not place the monitor on an unstable cart stand or table If the monitor falls it can injure a person and cause serious damage to the appliance Use only a cart or stand recommended by the manufacturer or sold with the monitor If you mount the monitor on a wall or s
6. ITION V OSD Position Controls the OSD OSD TIMEOUT menu s vertical position OSD Timeout Determines how long in seconds the OSD menu waits before closing automatically after no action has been performed OTHER Other Ea IRR O A R Ei Language English French German Italian Spanish Japanese Portuguese or Nederlands Korea Simplify Chinese nen Traditional Chinese Input Controls the selection of the input signal The monitor allows you to make the following connections analog graphics card via the 15 pin mini D Sub interface digital graphics card via the 24 pin DVI D interface Speaker Volume Adjusts the monitor loudspeaker output volume Information There is an optional OSD window on off that displays the newly adjusted screen resolution settings PLUG AND PLAY Plug amp Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD It allows the monitor to inform the host system of its identity and depending on the level of DDC used communicate additional information about its display capabilities DDC2B is a bidirectional data channel based on the 2 protocol The host can request EDID information over the DDC2B channel THIS MONITOR WILL APPEAR TO BE NON FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL ORDER FOR THIS MONITOR TO OPERATE PROPERLY THERE MUST BE A VIDEO INPUT SIGNAL This monitor meets the Green monitor standards as set
7. Input 224 Power AC Input User s Manual ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor then adjust the monitor s angle to your own preference Hold the stand so you do not topple the monitor when you change the monitor s angle You able to adjust the monitor s angle from 0 to 20 20 Figure 3 monitor s angle NOTES e Do not touch the LCD screen when you change the angle It may cause damage or break the LCD screen e Careful attention is required to catch your fingers or hands when you change the angle User s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off The other control buttons are located at front panel of the monitor See Figure 4 By changing these settings the picture can be adjusted to your personal preferences e The power cord should be connected Connect the Signal cable from the monitor to the VGA card Press the power button to turn on the monitor position The power indicator will light up Figure 4 External Control Button EXTERNAL CONTROLS Menu Enter Power Button Power Indicator 5 Volume lt 6 Auto Adjustment User s Manual FRONT PANEL CONTROL Power Button Press this button to switch ON OFF of monitor s power Power Indicator Green Power On mode Orange Off mode MENU
8. by the Video Electronics Standards Association VESA and or the United States Environmental Protection Agency EPA and The Swedish Confederation Employees NUTEK This feature is designed to conserve 16 User s Manual electrical energy by reducing power consumption when there is no video input signal present When there is no video input signal this monitor following a time out period will automatically switch to an OFF mode This reduces the monitor s internal power supply consumption After the video input signal is restored full power is restored and the display is automatically redrawn The appearance is similar to a Screen Saver feature except the display is completely off The display is restored by pressing a key on the keyboard or clicking the mouse User s Manual TECHNICAL SUPPORT FAQ Q amp AFOR GENERAL DEFECTIVE PROBLEM amp QUESTION POSSIBLE SOLUTION Power EDIS noton Check if the Power Switch is in the ON position Power Cord should be connected Check if the PC system is Plug amp Play compatible No Plug amp Play Check if the Video Card is Plug amp Play compatible Check if the D 15 plug pin of Video Cable is bent Picture is fuzzy Adjust the Contrast and Brightness Controls Picture bounces or a wave pattern is present in the picture Move electrical devices that may cause electrical interference Computer Power Switch should be in the ON position Computer Video Card should be snugly s
9. eated in its slot Make sure monitor s video cable is properly connected to the computer Inspect monitor s video cable and make sure none of the pins are bent sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED The LED should either turn ON or OFF after hitting the CAPS LOCK key The power LED is ON orange but there s no video or no picture Missing one of the primary colors RED GREEN or BLUE Screen image is not centered Adjust pixel frequency CLOCK and FOCUS or press or sized properly hot key AUTO Picture has color defects Adjust RGB color select color temperature white does not look white Horizontal or vertical Use win 95 98 shut down mode Adjust CLOCK and disturbances on the screen FOCUS or perform hot key AUTO Inspect the monitor s video cable and make sure that none of the pins are bent CLOCK pixel frequency controls the number of pixels scanned by one horizontal sweep If the frequency is not correct the screen shows vertical stripes and the picture has not correct width FOCUS adjusts the phase of the pixel clock signal With a wrong phase adjustment the picture has horizontal disturbances in light picture For FOCUS and CLOCK adjustment use dot pattern or win 95 98 shut down mode pattern User s Manual ERROR MESSAGE amp POSSIBLE SOLUTION CABLE NOT CONNECTED 1 Check tha
10. en 100 240V AC Min 5A The wall socket shall be installed near the equipment and shall be easily accessible User s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem Due to the nature of the fluorescent light the screen may flicker during initial use Turn off the Power Switch and then turn it on again to make sure the flicker disappears You may find slightly uneven brightness on the screen depending on the desktop pattern you use The LCD screen has effective pixels of 99 99 or more It may include blemishes of 0 01 or less such as a missing pixel or a pixel lit all of the time Due to the nature of the LCD screen an afterimage of the previous screen may remain after switching the image when the same image is displayed for hours In this case the screen is recovered slowly by changing the image or turning off the Power Switch for hours When the screen becomes black or flashing or cannot illuminate any more contact your dealer or service center to replace parts Don t repair the screen by yourself User s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 19 TFT Color LCD Monitor Crisp Clear Display for Windows Recommended Resolutions 1280 X 1024 19 monitors EPA ENERGY STAR Ergonomic Design Space Saving Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items LCD Monitor Re
11. ference only the real feature is depended on selected model Screen DVI Cable dual input mode optional User s manual Warranty card User s Manual INSTALLATION INSTRUCTIONS Install Remove Figure 1 Installing and Removing the Base POWER POWER SOURCE gt Make sure that the power cord 15 the correct type required in your area This LCD monitor has an Internal universal power supply that allows operation in either 100 120V AC or 220 240V AC voltage area No user adjustment is required Connect the AC power cord one end to your LCD monitor s AC input socket the other end to wall outlet User s Manual CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below 1 Connect one end of the 15 pin D Sub cable to the back of the monitor and connect the other end to the computer s D Sub port 2 Connect one end of the 24 pin DVI cable Dual input mode optional to the back of the monitor and connect the other end to the computer s DVI port 3 Connect the audio cable between the monitor s audio input the PC s audio output green port 4 Plug the AC power one end to LCD monitor s AC input socket the other end to Wall outlet 5 Turn on your monitor and computer IN Figure 2 Connecting Cables VGA Input 2 DVI Input optional Audio
12. helf use a mounting kit approved by the manufacturer and follow the kit instructions Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of the monitor and to protect it from overheating be sure these openings are not blocked or covered Do not place the monitor on a bed sofa rug or similar surface Do not place the monitor near or over a radiator or heat register Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided The monitor should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Unplug the unit during a lightening storm or when it will not be used for long period of time This will protect the monitor from damage due to power surges Do not overload power strips and extension cords Overloading can result in fire or electric shock Never push any object into the slot on the monitor cabinet It could short circuit parts causing a fire or electric shock Never spill liquids on the monitor Do not attempt to service the monitor by yourself opening or removing covers can expose you to dangerous voltages and other hazards Please refer all servicing to qualified service personnel To ensure satisfactory operation use the monitor only with UL listed computers which have appropriate configured receptacles marked betwe
13. mpany McGrath Environmental Consultants Ltd Contact Person Ms McGrath Clodagh Address 20 Lower John Street Cork Ireland Tel 021 4554833 Fax 021 4505805 Norway Company Bergfald amp Co as Contact Person Mr Solev g ystein Address Solavagsvegen 90 EIDSNES NORWAY Post Code N 6037 Tel 47 40 23 47 05 Fax 47 70 19 40 17 Web Site http www bergfald no bergfald_english html United Kingdom Company ARENA Network Contact Person Dr Tillotson Allen Address Bank Buildings Treforest Estate Pontypridd Rhondda Cynon Taff Kindom Post Code CF37 5UR Tel 01443 844001 Fax 01443 844002 Web Site http www arenanetwork org User s Manual TABLE OF CONTENTS SAFETY NOTICE 7 enter 7 SPECIAL NOTES LCD MONITORS 8 BEFORE YOU OPERATE THE 9 FEATURE 9 CHECKING THE CONTENTS OF THE 9 INSTALLATION INSTRUCTIONS 10 POWER 10 CONTROLS AND 8 11 ADJUSTING THE VIEWING 2 12 OPERATING 5 13 GENERAL 13 FRONT PANEL CONTROL 14 HOW TO ADJUST A SETTING 15 PLUG
14. ssions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 000 e Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium mercury and lead The requirements included in this label have been developed by TCO Development in cooperation with scientists experts users as well as manufacturers all over the world Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in amore user friendly direction Our labelling system started with displays 1992 and is now requested by users and IT manufacturers all over the world For more information please visit www tcodevelopment com User s Manual Recycling Information We the HannStar Display Corp care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life These devices contain recyclable materials which can be re decomposed and re integrated into brand new marvels On the contrary other material can be classified to hazardous and poisoned substances We strongly encourage you to contact the provided information to recycle this product United State http newyork earth911 org Asia http recycle epa gov tw public public4 2 Europe Ireland Co
15. t the signal cable is properly connected If the connector is loose tighten the 8 screws 2 Check the signal cable s connection pins for damage INPUT NOT SUPPORT Your computer has been set to unsuitable display mode set the computer to display mode given in the following table FACTORY PRESET TIMING TABLE VIDEO MODE RESOLUTION HORIZONTAL VERTICAL APPLICABLE FREQUENCY kHz FREQUENCY Hz MODEL 640 x 480 31 469 59 94 800 x 600 1024 x 768 SXGA Pee VGA 55 15 Pin Color Display Signal Cable DESCRIPTION _ TMDS Data 2 13 TMDSData2 14 _ 3 TMDS Data 2 4 Shield 15 050 4 6 DDCData 19 __ Vertical sync 22 _ TMDSDta 21 __TMDSDatat 22 23 20 TMDS Data 1 3 Shield NO LE IE LSE 6 DDCClock 10 12 5 20 User s Manual DESCRIPTION MDS Data 3 5V Power Ground for 5V ot Plug Detect MDS Data 0 MDS Data 0 MDS Data 0 5 Shield MDS Data 5 MDS Data 5 MDS Clock Shield MDS Clock MDS Clock
Download Pdf Manuals
Related Search