Instruction Manual
Contents
1. t modify the unit by yourself Use only genuine replacement parts when replace parts Do not wet the unit When your hands are wet don t use and disconnect the unit or pull the power cord While using the unit don t do anything that may cause bodily harm or physical damage Keep the unit out of the reach of children 8 Assemble and disassemble nozzle 1 Place the selected nozzle on the steel tube s air outlet of handle Four fixation points on nozzle must be in steel tube Turn nozzle clockwise with hand till cannot turn Place three fixation foot of spanner in three troughs of nozzle and lock the nozzle with the spanner turn it clockwise When you disassemble the nozzle lock the nozzle with the spanner and turn it anticlockwise to take it out Fixation foot po 3 md Spanner Trough Nozzle Replace the heating element Replace heating element when the unit is cooled down As shown in the diagram unscrew two fixed screws in handle Turn the handle subassembly 1 and remove it out then remove handle housing 1 Move the cooling fan carefully and take out three screws used for fixing PCB Reverses PCB unsolder the heating element s wire from the PCB Pay attention to connection location 6 1 Set temperature Under the condition of switching on power press A or Y button and the display window will show the set temperature Press A button once and the set temperature2. the user or physical damage to the objects involved For your own safety be sure to comply with these precautions Note A Note indicates a procedure or point that is important to the process being described CAUTION When the power is on the air outlet and its surrounding area is very hot Since mishandling may lead to burns or fire be sure to comply with the following precautions Please avoid misuse of the station use the station according to this instruction manual Don t touch the nozzle and its surrounding area Don t use the product near the flammable items Advise other people in the work area that the unit can reach a very temperature and potential danger should be considered Turn the power off when taking breaks or finished using the unit Before replacing parts or installing nozzle turn the power off and allow the unit to cool down to room temperature Disconnect the power plug when not in use for a long time The unit use rated voltage and frequency Please refer to the brand behind the unit It is strictly prohibited to use the unit if it is damaged especially the power cord This machine is equipped with a 3 wires grounding plug and must be plugged into a 3 ternimal grounded socket Do not modify plug or use an ungrounded power socket If an extension cord is necessary only use a 3 wires extension cord that provides grounding Don t knock the handle it maybe damage the handle Don
3. HRS7 Lead Free Rework Station Brushless Fan Soft Airflow Instruction Manual Thank you for purchasing this SMD Rework Station Please read this manual before operating the unit Store this manual in a safe easily accessible place for future reference 10 Replaceable Parts Part Number Part Name Description 47410 PCB 22010 Fan 47404 1 Heating element 110V 47404 Heating element 220V 42328 1 Handle housing 24416 A2084 Nozzle 8 4mm Single 24415 A2127 Nozzle 2 7mm Single 6 Take out heating element and mica paper used for wrapping heating element from steel tube Take care not to break the grounding wire on the steel tube 7 Wrap the new heating element with mica paper and put it into steel tube Make sure the heating element should be put in properly 8 Connect the wire of heating element according to original place 9 Reassemble the handle according to the opposite order of disassembling Note 1 Don t break the grounding wire on the steel tube when replace heating element 2 Don t break the connection wire of fan Mica paper ee ee S ST m Handle subassembly 1 e Si KE SN OH N 8 E Handle housing WARNING In this instruction manual Warning Caution and Note are defined as follows AWarning Misuse may potentially cause death of or serious injury to the user A Caution Misuse may potentially cause injury to
4. age triggering mode and will not be influenced by air volume Large power rapid heating LED display temperature accurate and stable it really realizes lead free desoldering Airflow is adjustable large air volume mild wind Temperature can be easily and conveniently adjusted suitable for many purposes Induction switch inside handle ensures starting working immediately after the handle is held When handle is put on the holder the system will return to standby mode Easy to use Compact Handle s design agile and convenient to operate Various types of nozzles optional With the automatic cooling function it can prolong the life of heating element and protect the unit The housing is made of alloy material It is compact durable and it takes up little space on the workbench Adopt brushless fan a long service life and noise is very low 2 Specification Model QUICK997 Type LED Micro computer Digital display Power consumption 700W Air pump amp Airflow type Brushless fan mild wind Air volume 120L min Max Temperature range 100 C 450 C Display mode LED Digital display resolution 1 C Length of handle assembly 120cm 21 L x 13 2 W x 11 0 H cm Dimension Weight 1 55Kg Noise Less than 45dB 3 Application 1 Suitable for soldering and desoldering various kinds of components such as SOIC QFP PLCC BGA chips 2 It can be used for he
5. at shrinkage paint and sticker removal preheating glue connecting etc 4 Installation If you use the unit for the first time please assemble the handle holder as follows 1 Remove two screws which fix the handle holder on the right side of the unit 2 Direct two holes of handle holder to two corresponding holes on the unit turn and tighten the removed two screws 5 Operation 1 Set the unit properly put the handle on the holder 2 Connect the power linker to the power socket of the unit 3 Plug in the power plug 4 Place appropriate nozzle try to use nozzle of large dimension 5 Turn the power switch to 1 and the display window shows now the unit is in standby status 6 Press the A or Y button to set the working temperature 7 Pick up the handle and keep the nozzle downwards the angle is more than 10 degree the unit starts working immediately Set appropriate air volume with airflow knob and start your work when temperature remains stabilization 8 Handle must be put back on the holder after working Meanwhile the heating current will be cut off and it enters into cold air cooling heating element work mode automatically The unit will be in standby status when temperature is below 100 C 9 Turn off power switch when not in use for a long time Note 1 Try to use lower temperature and large volume airflow while using the unit it can help to prolong the life of heat
6. ing element and ensure the safety of IC 2 After working the handle must be put on the holder and keep the nozzle upwards the angle is more than 10 degree the unit stops heating In order to work normally please do not keep the nozzle upwards
7. will rise 1 C display window will show the set temperature Press V button once and the set temperature will drop UC If press and hold the AT or Y button and not to release the set temperature will rise or drop rapidly After releasing it actual temperature or will be displayed and the unit enters into standby state after the set temperature is displayed for two seconds Note symbol instruction 1 Si cr means temperature at air outlet is below 100 C When the handle is on the holder the unit is in standby mode S E means there is something wrong with the sensor The heater should be replaced heating material and sensor assembly While at work if temperature display is less than 50 C and not to rise any material and sensor assembly Notice to user The air outlet and its surrounding area maybe very hot please take care and not being hurt The heating handle must be put on the holder Never place it on working surface or other places Please make air outlet clear and not being blocked The handle must be placed on the holder after working After the unit cools down below 100 C automatically turn off the unit Keep the object 2mm at least from air outlet Choose appropriate nozzle according to work demand Differences in temperature may exist when different nozzles are used 1 1 Character Closed loop of sensor temperature can be controlled by zero volt
Download Pdf Manuals
Related Search