Home

DVR ED2916 - Advanced Technology Video

1. Cancel Figure 27 Network General setup screen Highlight the first box beside Remote Watch bps ips You can select the Transfer Speed from 50Kbps to 1 Gbps Highlight the second box beside Remote Watch bps ips You can select the unit of measure for the transfer speed between bps and ips Press the button to set the transfer speed Highlight the box beside Remote Watch Quality and press the button You can select the Quality from Very High High Standard and Basic Press the button to set the Quality Highlight the box beside Remote Watch Resolution and press the button You can select the Resolution from Very High High and Standard Press the button to set the Resolution NOTE The higher Quality and Resolution settings require higher Transfer Speed settings The transfer speed you set is the maximum speed Depending on the network environment this speed may not be achieved You can limit the network bandwidth settings so that the system does not consume too much network bandwidth Highlight the box beside Network Bandwidth Limit and press the Up and Down arrow buttons to set the desired maximum bandwidth from 100Kbps to 1Gbps NOTE When limiting the network bandwidth the remote watch image on the PC running RAS or WebGuard might not be displayed properly The DVR supports two way audio communication between a local system and a PC running RAS Highlighting the box beside Remote Au
2. c cccccecccecccseeceueeccecueceueecueeceuecsueecaeessueseueesaeessueseaeesauessueesaeessaeeseeesaenegas 74 CID CODY SCI CN toto o ol dia ea 75 A cette ties Er AEE cet atieeee ensue E 76 Digital Video Recorder Chapter 1 Introduction Your color digital video recorder DVR provides recording capabilities for 16 camera inputs It provides exceptional picture quality in both live and playback modes and offers the following features e 16 Composite Video Input Connectors e Compatible with Color NTSC or PAL and B amp W CCIR and EJA 170 Video Sources e Auto Detection for NTSC and PAL e H 264 Codec e Monitor Connectors 1 HDMI 1 VGA e Multiple Search Engines Date Time Calendar Record Table Event e Real time Recording 480 400 Images per Second NTSC PAL with Very High D1 Resolution e Continuous Recording in Disk Overwrite Mode e 2 USB 2 0 Ports e Continues Recording while Transmitting to Remote Site and during Playback e User friendly Graphical User Interface GUI Menu System e Multiple Recording Modes Time lapse Pre event Alarm Motion and Panic e Two way Audio Communication e 4 Channel Audio Recording and 1 Channel Audio Playback e Text Input for ATM and POS e Alarm Connections Include Input Output e Built in Alarm Buzzer e Live or Recorded Video Access via Ethernet e Time Synchronization using industry standard protocol e IR Remote Control e Self diagnostics with automatic notification includi
3. When the DVR is in the Event mode the red icon displays at the top left corner of the screen The DVR will record and displays the icon at the top left corner of the screen when any event occurs When the DVR is in the Pre Event recoding mode the yellow 4 icon displays when there is no event and the DVR is not recording When the DVR is in the Pre Event mode the red and display when any event occurs and the DVR starts recoding When the DVR is in the Time amp Event mode the DVR will follow the Time settings and the O icon displays at the top left corner of the screen The DVR follows the Event settings and the icon displays Highlight the box under the Channels heading and press the button to select which cameras will be recorded Simple Mode Only Highlight the box under the Settings heading and press the button to define the recording settings Schedule 1 Settings Quality Resolution Cancel Figure 15 Schedule Settings Advanced Mode setup screen You can set the ips Quality and Resolution ips Quality Resolution and Dwell for Advanced Mode setup of the recording for any modes you set up in the Mode column If you do not set the ips Quality Resolution and Dwell in the Settings column the DVR will follow the default settings See below for details NOTE Descriptions of the Record icons in the Type column are as follows i Time lapse Time EL Alarm In Motion ba Video Loss Video
4. 5 Water and or Moisture Do not use this equipment near water or in contact with water 6 Placement and Accessories Do not place this equipment on an unstable cart stand or table The equipment may fall causing serious injury to a child or adult and serious damage to the equipment This equipment and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the equipment and cart combination to overturn Do not place this equipment on a closed space Sufficient amount of ventilation air is necessary to avoid increase of ambient temperature which can cause improper operation or the risk of fire 7 Power Sources This equipment should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power please consult your equipment dealer or local power company You may want to install a UPS Uninterruptible Power Supply system for safe operation in order to prevent damage caused by an unexpected power stoppage Any questions concerning UPS consult your UPS retailer 8 Power Cords Operator or installer must remove power and TNT connections before handling the equipment 9 Lightning For added protection for this equipment during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the equipm
5. Export menu press the BACK UP button on the remote control while in the Live Monitoring mode or press and hold the SEARCH button on the front panel for more than three seconds while in the Search mode and the Clip Copy screen appears to allow clip copy setup 74 Digital Video Recorder Clip Copy Data Source Record From First 2013 05 14 07 58 40 To Last 2013 05 14 07 58 40 Channels 1 16 Password lt None gt Dest 1 SanDiskCruzer 8 03 GB File name 20130514 exe Include Text In Data Use Site Info Progress Figure 53 Clip Copy screen You can search video from the first to last recorded images or you can set the start and stop times and dates Highlight the box beside From and press the Play Pause button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the first recorded image When highlighting and pressing the 6 button the bookmark list displays and the bookmark point you selected will be the starting date and time Highlight the box beside To and press the button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the last recorded image When highlighting Le and pressing the button the bookmark list displays and the bookmark point you sel
6. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Digital Video Recorder Table of Contents Chapter T INTO CHO Nes E E E EO 1 A eo a EO e E EA 1 TeCcANICALOVENIE Wi A ide 1 Chapter 2 l stalaU oM usi a A A ee io 3 A E A a ee ee ee eer ee nee 3 FRECUIFSC instalation OO Sino ie ace usted 3 video MPU enais vies dea godess aanstwenaa lass canvas idas lata es 3 Audio IMOUR a adas 4 Ea ay o1U 14 10 0 0 aeeneneateenen tte renee een at otter E eee nent rete ieeetntee eee cee terre ent 4 Facon Re Set SWIC taco laa 4 ys ON AA A A A O 5 INGIWORK POM snoot loto 5 FR O o tc ieiaad 5 O AA A A a O T 5 Power Ord On CON rats ccc aceac orita ilatina deis 6 chapter o COnnQUraulOM esman dd ces hates e lA T FrontFR anel CONTOS sorria a dde in teas 7 Sl A a E EO AOS 7 O ean ates eae temas 7 Alh LEDen aa Moana cata asec E A sedate cu maavoncdesmmeec N a 7 ATTOW BUON S ii A A a aa 8 Paye BoA BURON RRE AC rtene tren etre sree neent annette erent ae etree rent ee reese ree ee tee ee eet 8 MENU BUON torbe tada tii coa 8 PTZ Z0Om BUOM aee a aaa o toa 8 Group Sequence BUON iessen aa a a A 8 A A A O 8 Dis
7. NetFS Highlight Use NetFS and press the button to toggle between On and Off The Title box displays the NetFS site name Use the virtual keyboard to enter the name The Use box allows you to select the usage of the NetFS function e N A It disables the NetFS function e ALL It enables all NetFS functions e Upgrade It allows you to use the upgrade file uploaded on the NetFS site e Setup It allows you to import or export a setup file uploaded on the NetFS site e System Log It allows you to save system log on the NetFS site e Clip Copy It allows you to manually copy video clips to the NetFS site or to automatically copy event detected video clips to the NetFS site e Print It allows you to save images as a PDF file on the NetFS site The Site box displays the NetFS site information The 3 box allows you to delete a NetFS site NOTE When you delete an FTP site in the NetFS setup screen on the Network menu the FTP site in the FTP setup screen on the Notification menu will be deleted too When you change the usage to other than ALL or Clip Copy an FTP notification function will be disabled Highlight the and press the button to register a NetFS site max 16 PRCT RT Highlight the box beside Address and press the button A virtual ae keyboard appears allowing you to enter the NetFS address Port 2115 1 65535 Remote path fee i Highlight the box beside
8. Show System Log Recorded Data 2013 06 10 22 46 12 2013 06 10 22 51 49 Clear All Data Wizard System Shutdown Cancel Figure 8 System General setup screen Highlight the Site box and press the button A virtual keyboard appears that you can use to enter a Site Name Once you have entered your title highlight OK and press the button Highlight the box beside System ID and press the button Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number from 0 to 99 NOTE The System ID number is used to identify the unit when it is connected with other DVRs through the RS485 port You cannot use the same ID number for two or more DVRs that are in the same RS485 network It is possible to have multiple DVRs with System ID 0 that are in the same area as long as they are not part of an RS485 network If this is the case all will be controlled at the same time when using the infrared remote control Highlight the box beside Language and press button A drop down menu displays the available languages Highlight the desired language and press the button 13 User s Manual The box beside Version displays the software version of the DVR To upgrade the software connect a USB device containing the upgrade package file to the DVR If you enabled the NetFS function Network menu gt NetFS ta
9. in this column it indicates the item is a Group Name If there is a in front of the Group Name it indicates that the group has been expanded and all of the User Names within that group are displayed below the Group Name If there is a in front of the Group Name it indicates that the group has been collapsed and all of the User Names within that group are hidden To collapse or expand a group highlight the column in front of the desired group and press the button Highlighting a Group Name and pressing the 4 button allows you to change the authority levels assigned to the group CAUTION Write down the new password and save it in a secure place If the password is forgotten the unit must be reset using the Factory Reset Button and all data settings will be lost Highlighting a User Name and pressing the button allows you to add or change the password assigned to that user You can also change the group to which the user is assigned 23 User s Manual The column can be used to delete a User Name or an entire Group If the XK is grayed out that Group or User cannot be deleted Highlight the ME and press the 4 button You will be asked to confirm that you want to delete the User or Group To delete the User currently logged into the DVR on a local system or a PC running RAS log the user out of the system first and then delete the user To add a Group highlight the Group box and press the button
10. Audio In Out Your DVR can record audio from up to four sources Connect the audio sources to Audio In 1 Audio In 2 Audio In 3 and Audio In 4 as needed using RCA jacks CO km Connect Audio Out to your amplifier NOTE Itis the user s responsibility to determine if local laws and regulations permit recording audio The DVR does not have amplified audio output so you will need a speaker with an amplifier The DVR does not have a pre amplifier for audio input so the audio input should be from an amplified source not directly from a microphone Alarm Input Output NOTE To make connections on the Alarm Connector Strip press and lalalala hold the button and insert the wire in the hole below the button After releasing the button tug gently on the wire to make certain it is connected a To disconnect a wire press and hold the button above the wire and pull AIS AHO AIHAN2 woh a Al 1 to 16 Alarm In You can use external devices to signal the DVR to react to events Mechanical or electrical switches can be wired to the Al Alarm In and GND Ground connectors The threshold voltage of electrical switches for NC Normally Closed is above 2 4 V and for NO Normally Open is below 0 3V and should be stable at least 0 5 seconds to be detected The voltage range of alarm input is from OV to 5V See Chapter 3 Configuration for configuring alarm input os out the wire GND Ground Connect the ground
11. Use Panic Recording Panic Recording Duration No Limit v ips 30 00 ips v Quality High Resolution High e Cancel Figure 13 Record General setup screen Highlighting Recycle and pressing the button toggles between On and Off In the Recycle mode the DVR records over the oldest video data once all available storage space has been used When Recycle 1s turned off the DVR stops recording once all available storage space has been used Highlight the Event Record Dwell box and set the length of time you would like to record for the associated event Y ou can set the dwell from 5 seconds to 30 minutes Refer to Event Actions screen in this chapter for information regarding event recording The DVR can record up to four audio inputs Highlighting Record Audio and pressing the button toggles between On and Off Highlight the slide bar beside Auto Deletion and use the Left and Right arrow buttons or Up and Down arrow buttons to adjust the length of time recorded data will be kept from 1 to 999 days The DVR automatically deletes video recorded earlier than the user defined period under three conditions at midnight whenever the system reboots or whenever the user changes the Auto Deletion settings Selecting Never will disable the Auto Deletion function 27 User s Manual Highlight the slide bar beside Limit Time Lapse Recording and use the Left and Right arrow buttons to adjust the len
12. and a capital letter e g J for NL New Line M for CR Carriage Return Refer to the device manufacturer s documentation for Line Delimiter character s Highlight the box beside Ignore String and press the button Use the virtual keyboard to enter any strings of text that you want the DVR to ignore Refer to the device manufacturer s documentation for text strings that the device sends during transactions so you will know which ones you do not want recorded Highlight the Case Sensitive box and press the button to toggle between On and Off Refer to the device manufacturer s documentation to determine if the text strings are Case Sensitive If the device distinguishes between upper and lower case letters make certain the Case Sensitive box is turned On Highlight the box beside Time Out and press the button Set the length of time to wait for the new text string The DVR will consider a transaction complete if no new text strings are entered between the last text input and the dwell time out You can adjust the Time Out dwell from 5 seconds to 15 minutes Each input can be given a title Highlight the desired Title box and press the button A virtual keyboard appears allowing you to enter a title name Highlight the box under the Actions and press the button The DVR can be set to react to text input Text input can be associated with cameras trigger an Alarm Out connector sound the DVR s internal buzze
13. button You can select the text in devices which you want any reports of text input Highlight the box beside Record Channels and press the button You can select the cameras that you want to search for any reports of event recorded data The DVR will display the events not the camera channels that occurred and that also are recorded on the camera channel that you selected If you do not select a camera channel in this field the DVR will search events that are not associated with cameras You can also toggle On and Off self diagnostic System Events as part of your search The choices are Panic Record Check Recording Check Alarm In Disk Almost Full Disk Bad Disk Temperature Disk S M A R T Fan Error Disk Config Change Once you set your desired search conditions highlight Search and press the button to display the search results in the Event Log Search screen Selecting Cancel exits the screen without saving the changes Record Table Search 2 QBR d gt b 20 34 25 lt Compact View gt x 2013 06 17 3 14 15 16 17 18 19 20 QB KX dd gt b JT 20 34 25 lt Standard View gt 69 User s Manual x 2013 06 17 M w gt E a he o o N 00 No o 1 CAM1 2 CAM2 3 CAM3 4 CAM4 5 CAMS 6 CAM6 7 CAM7 8 CAM8 9 CAM9 10 CAM10 11 CAM11 12 CAM12 13 CAM13 14 CAM14 15 CAM15 16 CAM16 QUERY gt e D nN S wo
14. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS The information in this manual is believed to be accurate as of the date of publication We are not responsible for any problems resulting from the use thereof The information contained herein is subject to change without notice Revisions or new editions to this publication may be issued to incorporate such changes The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSource Guide OpenSourceGuide pdf or as a printed document included along with the User s Manual User s Manual Important Safeguards 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Cleaning Unplug this equipment from the wall outlet before cleaning it Do not use liquid aerosol cleaners Use a damp soft cloth for cleaning 4 Attachments Never add any attachments and or equipment without the approval of the manufacturer as such additions may result in the risk of fire electric shock or other personal injury
15. Selecting 9 Camera Menu Audio toggles audio playback On and Off Recorded audio will be played when the DVR displays a camera with recorded audio in full screen mode e Show Hide Text In Selecting Le Camera Menu Show Text In or Hide Text In shows or hides the text in data on the screen if the video was recorded with text in data e Edit Group Selecting Le Camera Menu Edit Group enters to the Active Cameo mode It is the same as pressing and holding the button for three seconds or longer in any multiview formats Refer to the previous Live Monitoring Active Cameo Mode section for details NOTE The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the search mode Export e A B Clip Copy Selecting El Export gt A B Clip Copy will set the starting point of the video to be clip copied and the icon displays at the bottom left corner of the screen Selecting A B Clip Copy again will set the ending point of the video to be clip copied and displays the Clip Copy screen See the following Clip Copy section for details e Clip Copy Select El Export gt Clip Copy and the Clip Copy screen appears to allow clip copy setup See the following Clip Copy section for details e Print Selecting L Export Print allows you to print a selected image See the following Print section for details Status Selecting M Status in the Search menu allows you to check the status of
16. gt N ui lt Expanded View gt Figure 49 Record Table Search screen Recording information about video images currently displayed on the screen displays on the recording status bar A grey vertical line indicates the current search position To search specific video move the vertical line by using the Left or Right arrow buttons on the front panel or by clicking the mouse on the desired segment If the DVR s time and date have been reset to a time that is earlier than some recorded video it is possible for the DVR to have more than one video stream in the same time range In this case the overlapping time range in the record table will be separated by a yellow vertical line NOTE The recorded data in the time range located after the yellow vertical line is the latest There are three view modes Standard view Expanded view and Compact view Standard view default displays combined recording information of all camera channels currently displayed on the screen In the Standard view mode selecting the dl icon located at the bottom switches to the Expanded view mode The Expanded view displays the recording information of each camera channel currently displayed on the screen Selecting the icon in the Standard view mode switches to the Compact view mode which displays only the toolbar Selecting the dl icon in the Compact view mode switches to the Standard view mode and selecting the icon in the Expanded view mode swit
17. threshold 5VDC Alarm Output 1 relay output terminal blocks 1A Y30VDC NO 78dB at 10cm 86 Digital Video Recorder CONNECTORS Video Input Composite 16 BNC HDMI 1 HDMI Monitor Output VGA 1 VGA Audio In Audio Out Alarm Input Output Ethernet Port RS232 Serial Port RS485 Serial Port IR Port USB Port STORAGE Primary Storage SATA hard disk drive Secondary Storage USB hard disk drive or flash drive Dimensions W x H x D Unit Weight Shipping Weight Shipping Dimensions p F p WxHxD 15 4 x 4 4 x 14 2 390mm x 113mm x 360mm Operating Temperature Operating Humidity Power Adaptor input 100 240 V 50 60Hz 1 5A output 12 Vri SA Power Consumption Approvals When two hard disk drives of 2TB are installed the value was measured Specifications are subject to change without notice V1 1 37
18. when audio communication is available between the DVR and a PC running RAS via Ethernet The icon 44 displays when VNC service is running 54 Digital Video Recorder e Freeze amp Sequence The icon displays while in the Freeze mode and the displays while in the Sequence mode e Screen Group The number of screen group displays when the DVR is not in the 4x4 display mode e Free Space The icon G displays when the DVR is in the Recycle mode and the percentage of available storage space displays when the DVR is not in the Recycle mode Date Time The current date and time information displays User Name The name of the current user logged in displays Background Panel The background panel at the bottom of the screen displays in black Camera No The camera number displays at the top left corner of each camera screen Camera Title The camera title displays at the top left corner of each camera screen Record The record related icons display on each camera screen Audio The icon Y displays on each camera screen for which the DVR can play live audio PTZ The icon P displays on each PTZ camera screen Text In The text input strings display on the screen You can adjust the Display Dwell time sec for the text input strings displayed on the screen You can adjust the transparency of the setup screens by highlighting Transparency and using the Left and Right arrow buttons Highlight
19. 4 Focus Near Far Y Iris Open Close h ax Set Load Preset ey Advanced PTZ Event Monitoring When an event occurs the DVR will display the camera associated with the event and the icon Q displays on screen if Event Monitoring On is selected in the Display setup screen Main Monitor tab How the cameras are displayed depends on the number of cameras associated with the event If one camera is associated with the event the DVR will display the camera full screen If two to four cameras are associated with the event the DVR will display the cameras on a 2x2 screen If five to nine cameras are associated with the event the DVR will display the cameras on a 1 5 1 7 or 3x3 screen If 10 or more cameras are associated with the event the DVR will display the cameras on a 4x4 screen Event monitoring lasts for the dwell time set for event recording After the dwell time has elapsed the monitor returns to the previous screen unless another event has occurred If you want to return to the live monitoring mode before the dwell time has elapsed press the DISPLAY button or one of the camera buttons 61 User s Manual Covert Camera If a camera is set up as Covert 1 in the Camera setup screen General tab that camera will not be displayed unless a user with Covert Camera View authority logs into the system However the camera title and status icons will be displayed on the monitor If a camera is set up as Covert
20. Blind Text In Channels that are not defined will use the setting values of the previous schedule item NOTE When multiple events are detected at the same time from a specific channel the DVR will record event video with the high setting values if the ips Quality Resolution and Dwell values of events are different from each other However the ips will be reset to the supported maximum value when the ips Quality Resolution and Dwell are all set to the highest value Advanced Mode Only 29 User s Manual Highlight the box under the heading and press the 4 button to delete the recording settings You will be asked to confirm that you want to delete the settings Highlight Default and press the button The Default screen appears Default Mode i Quality Resolution 30 00 ips _ Standard _ Standard J 30 00 ips Cancel Highlighting boxes under ips and pressing the button allows you to set the images per second for Time and Event recording You can select from 1 00 to 30 00 ips 25 00 ips PAL Highlighting boxes under Quality and pressing the button allows you to set the recorded image quality for Time and Event recording You can select from Very High High Standard and Basic Highlighting boxes under Resolution and pressing the 4 button allows you to set the recorded image resolution for Time and Event recording You can select from Very High D1 High Half D1 and Standard CIF
21. DVR to have more than one video stream in the same time range In this case you can search overlapping video streams individually segment 2 by selecting a specific segment For example when the DVR o CRO A R has recorded video from one to five o clock and the user changes the time backward from five to three o clock and then continues recording until six o clock there will be two video streams and segments from three to five o clock You can search overlapping video streams by selecting a specific time or time range If you want to search recorded video at four o clock during the overlapping time range using a search menu such as Go to the Date Time select the segment you want to search If you want to search recorded video from four to five o clock during the overlapping time range using a search menu such as Event Log Search Text In Search or Motion Search it is possible for the DVR to have two overlapping start and stop times You will be asked to select one of the pi se io overlapping start and stop times from the search time ranges as follows e From four o clock of the first segment to five o clock of the first segment e From four o clock of the first segment to five o clock of the second segment e From four o clock of the second segment to five o clock of the second segment Error Code Notices Device error Invalid media Bad sector Connecting device failed O h 01
22. Logout admin 2013 06 10 22 49 02 2013 06 10 22 48 45 Setup Change User 2013 06 10 22 48 35 Setup Change User 2013 06 10 22 48 18 Setup Begin 2013 06 10 22 48 13 2013 06 10 22 48 12 Search Begin 2013 06 10 22 48 05 Login admin 2013 06 10 22 48 03 Logout admin 2013 06 10 22 48 01 2013 06 10 22 47 53 Setup Change Record 2013 06 10 22 46 12 Clear Disk Internal 2 1 3 El Export g The System Log screen lists system activities up to 5 000 from the latest that have occurred along with the time and date The EY icon will be displayed in the last column for system activities of the remote site You can scroll through the log pages by using the Up and Down arrows or you can go directly to a log page by entering the log page number in the box at the bottom left of the screen Highlight Close and press the button to exit the screen To export the system log information connect the USB device to the DVR If you enabled the NetFS function Network menu gt NetFS tab you can upload the log information on the registered NetFS site Highlight Export and press the button Select USB Storage or NetFS If you select NetFS select a NetFS site from the registered NetFS site list Highlight the box beside File name and press the button A virtual keyboard allows you to enter the file name Selecting Export will save the log information in txt file format on the USB device or the NetFS site Sy
23. Package is not found 02 Extracting package failed LILO failed ee OIO AIO Rebooting failed 105 Invalid package Remote connection failed wj oOjojo N ajo Remote upgrade is not authorized 03 Saving remote package failed Remote upgrade is cancelled by the user 0 USB device mounting failed oO Remote network error Reading upgrade package on the USB device failed Copying upgrade package on the USB device failed amp 401 402 20 Device is busy Dh Dh _ _ z 83 User s Manual System Upgrade Related Clip Copy Related 403 04 USB device is being used 405 Unsupported file system CCOO 500 System is busy clip copying TO System Log Notices Remote Setup Change Clip Copy User Remote Setup Fail Clip Copy From Setup Begin Clip Copy Cancel Logout VNC server address Setup End Clip Copy Fail 84 Digital Video Recorder Map of Screens MENU SYSTEM General Date Time User Storage System Event RECORD General Schedule Pre Event EVENT Motion Alarm In Video Loss Video Blind Text In CAMERA General PTZ Audio Alarm Out Remote Control NETWORK General AN FEN RTSP WebGuard VNC NetFS Callback Mail N T Schedule DISPLAY 1 0 0 v OS Main Monitor U 85 User s Manual Troubleshooting Possible Solution No Power e Check power cord connections e Confirm
24. Port and press the button Set the port Password number used when accessing the NetFS site by using the Up and Down arrow buttons to increase or decrease the numbers Highlight the box beside Remote path and press the button A virtual keyboard appears allowing you to enter a folder path in the NetFS site 47 User s Manual Highlight the box beside User and Password and press the button A virtual keyboard appears allowing you to enter the user and password used when accessing the NetFS site Highlight the Test box and press the button to test the current NetFS site settings you made VNC NETWORK General WebGuard Use VNC Cancel Figure 33 Network VNC setup screen Highlight Use VNC Virtual Network Computing and press the 4 button to toggle between On and Off You will be able to change the settings if Use VNC is enabled NOTE VNC service allows you to access the DVR and control it remotely using a PC or mobile devices via Ethernet Highlight the box beside Port and press the button Set the port number of the VNC server obtained from your system administrator Highlight the box beside Password and press the button A virtual keyboard appears allowing you to enter the password for VNC connection 48 Digital Video Recorder NOTE Up to three users at a time can access a DVR remotely via VNC service When control
25. UNES Sr dass 48 Notification Callback Setup SCreen cooccccocccccccccconcnconnnconncnnnncnononnnconnnonnnnnnnnnnnnnnnnnnnnnnnncncnos 49 Notification Mail Setup Screen ccooccccccccnccccnccncnccnonnnonnnnnonnnnnnnrnnnnnnnnonnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnos 50 Notification SNS setup Soreni a A ti 52 Notification F TP Setup Screen tadt andan eet eee sie else llas 52 Notification Schedule Setup SCTeen ooocccccccccocnnccccnncconnncnncnnononononnnononnnnnnnnnnnnnonnnnnnnncnonaneninos 53 Display OSD setup screen ocococcncnccnccncnnconcnconnnonnnnnnnnnnnnnnnnnnnnnnnrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnns 54 Display Main Monitor Setup screen ocooocccccncoccccnccncnncnnncnnnnncnnnnnnnnnnnnnonnnnnnnnnnrnnnnnonaninnrnnnnnnnos 55 LIVE Monitoring Melania veritas sane ean aa naar 57 PTZ SOC Camera TS a a ll cal 60 AA a a a A AAEE 61 Event Status Event Status SCIeenN ccccocccccccncconnnooocnnoncnononnnonnnnnnnnnonnnnnnnnnononnnnnonnnonannnnaninnnos 62 Event Status Storage SCreeNM a serrer rero A EU eee eeu 63 select Playback Camera MA 64 ss el AAA o go RRO nS eee MOREL eRe ene a RPE ET See Meee mt nay 65 Event LOG search Scree iee narn E cationic anne se E bac beeaed nk ace E 68 Record Table Search Screens aono aloe eee eae ete et ce ce el od 70 Moton Search Serena nai ias 71 TOXINS Ear SCE CM hte sarewcgerstteectnteteets actus an daa Niedoaecamouucaet deejeudaneebeheesntec ee Pouusuee 72 Bookmarks SCION
26. and plays back video of the selected 5 CAMS camera When in the single screen display format the camera currently displayed on the screen will E ee be selected and when in the PIP display format the camera displayed on the PIP screen will be selected 8 CAMB for the search channel During the Triplex mode the DVR maintains the same display format as it does secs in the live mode A red outline surrounding the video and the camera title indicates the search channel ar ANA While in the Triplex Mode the DVR continues recording cameras as they were set up in the recording 12 CAMI2 schedule Also live monitoring will continue except for the camera that has been selected for playback 13 CAM13 14 CAM14 15 CAM15 16 CAM16 Figure 46 Select Playback Camera menu When playing video for the first time the DVR will display the most recent image When playing video subsequent times the DVR will start playing video from the last recalled image Recorded audio will be played when the DVR displays a camera with recorded audio in full screen mode NOTE Only the administrator and users with Covert Camera View authority can view video from covert cameras The covert cameras in the playback mode are determined by the current camera settings Camera Buttons Pressing the individual camera buttons will cause the selected camera to display full screen Arrow Buttons Pressing the 44 button plays video backward at high speed Pressing the button agai
27. applied to both the live video on the monitors and the recorded video The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the live monitoring mode Search e All Channels Selecting KiJ Search All Channels exits the live monitoring mode and enters the search mode It is the same as pressing the SEARCH button e Triplex Selecting Ej Search Triplex enters the Triplex mode Selecting the camera number plays back video of the selected camera It is the same as pressing the SEARCH button when in one of the multiview formats Setup Selecting E2 Setup in the Live Monitoring menu enters the Main Setup screen Refer to Chapter 3 Configuration for detailed descriptions of system setup Status Selecting M Status in the Live Monitoring menu allows you to check the status of the DVR s system inputs and storage Refer to the following Status Monitoring section for details NOTE Selecting Status will only be enabled for a user who has System Check authority 59 User s Manual Active Cameo Mode You can enter the Active Cameo mode by selecting Edit Group from the Live Monitoring Camera menu or pressing and holding the button for three seconds or longer in any multi view format The yellow outline surrounding the video indicates the active cameo and pressing the arrow buttons moves the active cameo Pressing the Play Pause button exits the Active Cameo mode Select
28. button starts panic recording of all cameras and selecting E or pressing the button again stops panic recording If you set the Panic Recording Duration in the Panic Record setup screen panic recording will stop automatically according to the preset duration as long as His not selected or the PANIC button is not pressed 63 User s Manual NOTE When the DVR is not in the Recycle mode and all available storage space has been used panic recording will not operate Recording Audio If the DVR was set up to record audio it will record audio from up to four inputs when video is recording NOTE Make certain you comply with all local and federal laws and regulations when recording audio Playing Recorded Video If a user who has Search authority logs into the system the user can view recorded image Once video has been recorded you can view it by pressing the SEARCH button The DVR supports the Triplex function monitoring recording and playing back at the same time Pressing the SEARCH button when in one of the multi view formats enters the Triplex mode and displays the Select Playback Camera menu An Channels Selecting All Channels plays back video of all cameras The DVR maintains the same display format as 1t does in the live mode except for the PIP format You can also change the screen layout in the same cos way as you do in the live mode 2 CAM2 3 CAM3 re Selecting the camera number under Triplex enters the Triplex mode
29. clips When the DVR boots it deletes all images and video clips even if they were not uploaded yet JPG format files will be uploaded even when storage space is not enough Schedule NOTIFICATION Notify x x x x x x x x x x x x x x 3 Summary Email Interval Never Cancel Figure 38 Notification Schedule setup screen 53 User s Manual You can add and edit notification schedules on this screen Highlight the and press the button to add a schedule Highlighting the boxes under the Column heading and pressing the button allows you to edit the information in those boxes The Day box allows you to select the days that the notification schedule will be active The choices are Sun Mon Tue Wed Thu Fri Sat M F Hol and All The Range box allows you to set the time that the notification schedule will be active in 15 minute increments from 00 00 to 24 00 Highlight the desired box under the Notify heading and press the button The Schedule Notify menu appears AT You can toggle the entire list On and Off by highlighting Notification and Notification pressing the button You can toggle the individual items On and Off by Mail 1 1 highlighting that item and pressing the button Highlight OK and press LAN 1 lt Range gt the button to accept your changes MLAN 2 lt Range gt MLAN 3 lt Range gt NOTE For the Notify action the notify i
30. different devices and or move PTZ cameras to preset positions Video Loss Video Loss Interval Actions olulola aluo mi 2 alalals fajo bp gt D DD D D D p D oojoo mb o se Ignoring Time Save Cancel Figure 19 Event Video Loss setup screen Highlighting the box under the Video Loss Interval heading allows you to set the duration of a signal loss before the DVR will report a Video Loss The DVR will not consider any signal loss from a camera to be a Video Loss if the detected signal loss is shorter than the interval set on this screen Highlight the box under the Actions and press the button The DVR can be set to react to video loss differently for each camera Each camera can be associated with another camera trigger an Alarm Out connector sound the DVR s internal buzzer notify a number of different devices and or move PTZ cameras to preset positions Highlight Use Ignoring Time and press the button to toggle between On and Off When set to On the DVR will ignore video loss events occurring during the preset period Highlighting Time Setup and pressing the button allows you to set up event ignoring time 33 User s Manual Video Blind Sensitivity a Activation Time J Actions VSNSSASARs gs DDD D D D D D D DDD D D D D Use Ignoring Time Save Cancel Figure 20 Event Video Blind setup scr
31. example 01 and exe to the file name NOTE When naming a file you cannot use the following characters lt gt Highlight Include Text In Data and press the button This will toggle between On and Off When this feature is On you can include text in data when copying video if the video was recorded with text in data Highlight Use Site Info and press the 4 button This will toggle between On and Off When this feature is On you can add the site information to the file name for the video you are backing up NOTE When the site information is added to the file name some special characters lt gt in the site information will be converted to _ 15 User s Manual Once you have given the video clip a file name highlight the Start button and press the button The confirmation screen displaying data size will appear When the storage device does not have enough space the DVR will ask if you want to copy as much of the video clip as possible in the available space Highlight the Continue button and press the button to continue clip copy Once the clip copy starts you can cancel it by selecting Cancel or hide the screen by selecting Close When selecting Close Clip Copy continues and a confirmation screen will display when complete NOTE The file size for clip copy is limited to 30GB When copying video clips larger than 2GB the video clips will be
32. has moved Highlight the box beside Zone and press the button An image from the video appears with a grid overlaid You can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion NOTE Defining the area of the image in which you want to search for motion is nearly identical to setting up the DVR for Motion Please refer to Motion Screen in Chapter 3 Configuration for more detailed instructions on setting up the detection blocks When setting the Museum Search Zone the zone should be placed inside of the border line of the target object If the selected block is placed on the border line the sensitivity of the Museum Search may decrease The zone should be placed or focused on the centre or at least within the outline of targeted object Highlight the box beside Sensitivity and press the button You will be able to select from 1 low sensitivity to 5 high sensitivity Highlight the box beside Min Blocks and press the button You will be able to set the number of sensor blocks that must be activated Once you set your desired search conditions highlight Search and press the button to display the search results in the Motion Search screen Selecting Cancel exits the screen without saving the changes When you search for motion events of another camera you will be asked whether or not you want to delete the previous search results from the list Text In Search Te
33. move the rectangle to another area PTZ Button Pressing the button enters the PTZ Pan Tilt Zoom mode which allows you to control properly configured cameras Enter Button The e Enter button selects a highlighted item or completes an entry that you have made during system setup This button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode Alarm Button Pressing the ALARMI button resets the DVR s outputs including the internal buzzer during an alarm PTZ Control Buttons While in the PTZ mode the PRESET buttons are used to save Presets and load a Preset View the ZOOM buttons are used to Zoom In and Zoom Out and the FOCUS buttons are used for Near Focus and Far Focus Back Up Button Pressing the button allows you to copy video clips Calendar Button In the search mode pressing the CALENDARI button displays the Calendar Search screen Turning on the Power Connecting the power cord to the DVR turns on the unit The unit takes approximately 50 seconds to initialize Initial Unit Setup Before using your DVR for the first time you will want to establish the initial settings This includes items such as time and date display language camera remote control record mode network and password Your DVR can be set up using various screens and dialog boxes User s Manual Throughout the screens you will see A Highlighting the 9 and pressing the button gives you the opportunity to reset tha
34. network Highlight Auto Default and press the button to toggle between On and Off When it is On the DVR will obtain the IP address of the DNS server automatically NOTE Selecting Auto will only be enabled when the DVR is configured for DHCP or an ADSL network Selecting ADSL with PPPoE allows you to set up the ADSL network Highlight the box beside ID and press the 4 button A virtual keyboard appears allowing you to enter the ID for ADSL connection Highlight the box beside Password and press the button A virtual keyboard appears allowing you to enter the password for ADSL connection NOTE Entering the D and Password and highlighting OK reads the current IP address of the DVR configured by the ADSL network If the DVR is configured for DHCP or an ADSL network the IP address of the DVR might change whenever the unit is turned on 43 User s Manual FEN NETWORK Use FEN Cancel Figure 29 Network FEN setup screen Highlight Use FEN and press the button to toggle between On and Off NOTE FEN is the technology that automatically sets up your DVR to work seamlessly for remote viewing via your network internet connection For FEN to work naming your DVR will be required Highlight the box beside FEN Server and press the button A virtual keyboard appears allowing you to enter the IP address or domain name of the FEN server NOTE You will need to get the I
35. or a PC running RAS To add a User highlight the User box and press the button A virtual keyboard appears allowing you to enter the User Name Enter the name and assign the User to a Group and password You can use camera buttons 1 to 9 on the front panel to assign the password The password can be up to 8 digits You will be asked to confirm the password New User Group Administrator Password IE ES Confirm Lo Cancel NOTE In addition to using the front panel buttons or the infrared remote control you can use the virtual keyboard to assign the password To display the virtual keyboard click the button using the mouse not supplied Highlighting the box beside Auto Login allows you to select a User to be automatically logged in when the DVR is powered up It can also be set to never automatically login a user Highlighting the box beside Auto Logout allows you to select from a list of times that the user will be automatically logged out The options are Never 1 min 3 min 5 min 10 min 15 min 20 min 30 min and 1 hr 24 Storage SYSTEM Digital Video Recorder Capacity Format Information Cancel Figure 11 System Storage setup screen The information in the Type column describes the storage device The capacity of the storage device is displayed in the Capacity column The Format column displays whether the device is used for
36. panel or clicking the left mouse button on a camera image when in one of the multiview formats 1 e 2x2 1 5 1 7 3x3 or 4x4 Clicking the left mouse button on the screen again returns to the previous display mode e 2x2 1 5 1 7 3x3 4x4 Selecting EJ Display gt EZ BS EE EE or EE 2x2 1 5 1 7 3x3 or 4x4 displays the cameras in the selected multiview screen mode 2x2 1 5 1 7 3x3 or 4x4 Selecting each display mode 1s the same as pressing the button or scrolling the mouse wheel up and down when in one of the multiview formats 1 e 2x2 1 5 1 7 3x3 or 4x4 e Camera OSD Status OSD Selecting El Display Camera OSD or Status OSD toggles Camera OSD or Status OSD On and Off Previous Group Next Group Selecting W or MA Previous Group or Next Group in the Search menu moves to the previous or next page It is the same as pressing the button Alarm Selecting A Alarm in the Search menu resets the DVR s outputs including the internal buzzer during an alarm Panic Selecting pnl Panic in the Search menu starts panic recording of all cameras and selecting Ed again stops panic recording It is the same as pressing the PANIC button 66 Digital Video Recorder Camera Menu e Zoom Selecting 94 Camera Menu Zoom and choosing the camera number zooms the current playback image of the selected camera on the screen It is the same as pressing the button Selecting Zoom again exits the Zoom mode e Audio
37. recording Record or not Not Using Not formatted indicates the device is not formatted Internal 1 1 00 TB Use As Highlight the box in the Format column for the desired storage device and Record press the button You will be able to format the device for recording When nal selecting Not Using from Use As and highlighting the Format button the device will not be used for recording The Information column displays whether the device is being used or not Other indicates the device has been used for another DVR Highlight the box in the Information column for the desired storage device and press the button Internal 1 1 00 TB Information Model T31000322CS Serial 5VX31VDJ Recorded Data From 2013 06 10 22 46 12 To 2013 06 10 22 58 22 Clear Cancel You will be able to check the model name serial number and the time information about recorded data of the selected storage device If you want to erase recorded data on the selected device highlight Clear and press the button You will be asked whether or not you want to delete the data 25 User s Manual System Event SYSTEM Event Settings Actions System Boot Up Restart Shutdown 00 oo 10 Panic Record Check Recording Check Alarm In Disk Almost Full Disk Full Disk Bad Disk Temperature Disk S M A R T Disk Config Chan
38. registered on the DVRNS server Or http www dvronline net Entering the DVR IP address or the DVR name will be required when logging in NOTE You will need to get the appropriate IP address for the DVR you want to connect to and the WebGuard port number from your network administrator WebGuard only works with Microsoft Internet Explorer and will NOT work with other browsers WebGuard does not work in Microsoft Windows 8 metro UI Select between the WEBWATCH Web monitoring and WEBSEARCH Web search modes Entering ID and PASSWORD and clicking the LOGIN button logs in using the selected mode LOGIN EXIT Y ou will need to enter the DVR IP address in the DVR ADDRESS field when running the WebGuard program by entering http www dvronline net Selecting the Use DVRNS option allows you to enter the DVR name registered on the DVRNS server instead of the IP address You must enter the DVRNS server address and port number in the SETUP setting when selecting the Use DVRNS option NOTE Do NOT close the LOGIN window during the WebGuard operation otherwise it will cause a script error when switching between Web monitoring and Web search modes and you will need to restart the WebGuard program When running the updated WebGuard for the first time Internet Explorer might occasionally load the information of the previous version In this case delete the temporary internet files by selecting Tools gt Intern
39. selects text input strings See the following Text In Search section for details Go To e Go to the First Selecting FJ Go To gt Go to the First displays the first recorded image e Go to the Last Selecting FJ Go To Go to the Last displays the last recorded image e Goto the Date Time Selecting EJ Go To gt Go to the Date Time displays the Go to the Date Time screen Pitan one Move the cursor over the date and time and press the Play Pause button Enter Date Time to go to You can use the Left and Right arrow buttons to highlight the year month day 2013 05 14 08 05 55 hours minutes and seconds Use the Up and Down arrow buttons to change to the date and time you want to search for video Once you have set the date and time you want press the button Then highlight Go and press the button The selected date and time will display If no video was recorded during the selected time a message appears alerting you that no image was recorded at that time The button and arrow buttons can now be used to review the surrounding video Bookmark Selecting EJ Bookmark in the Search menu adds the current playback point to the bookmark list See the following Bookmarks section for details Display e Full Screen Selecting E Display Full Screen and choosing the camera number button displays the selected camera full screen It 1s the same as pressing the individual camera buttons on the front
40. side of the Alarm input and or alarm output to the GND connector NOTE All the connectors marked GND are common NO Normally Open Connect the device to the COM and NO Normally Open connector NO is a relay output which sinks 1A Y30VDC See Chapter 3 Configuration for configuring alarm output Connector Pin Outs Al 1 to 16 Alarm Inputs 1 to 16 Chassis Ground Relay Common Relay Alarm Out Normally Open Factory Reset Switch oC J The DVR has a Factory Reset switch to the left of the HDMI connector on the rear panel This EB switch will only be used on the rare occasions that you want to return all the settings to the original factory settings CAUTION When using the Factory Reset you will lose any settings you have saved To reset the unit you will need a straightened paperclip 1 Turn the DVR off 2 Turn it on again 3 While the DVR is initializing the front panel LEDs will blink When the front panel LEDs blink poke the straightened paperclip into the unlabeled hole to the left of the HDMI connector 4 Hold the reset switch until the DVR s internal buzzer sounds twice 5 Release the reset switch All of the DVR s settings are now at the original settings it had when it left the factory Digital Video Recorder Video Out An HDMI High Definition Multimedia Interface connector is provided so that you can use an HDMI monitor as your main monitor A Hom A VGA connector is provided so that you can us
41. that there is power at the outlet Check camera video cable and connections Check monitor video cable and connections No Live Video Confirm that the camera has power Check camera lens settings Check the current main monitor resolution If hard disk drive is full you will either need to delete video or set the DVR to the DVR has stopped recording Oveni Made The icon displays When the DVR is in the Pre Event recording mode the yellow and display however the DVR is not when there is no event and the DVR is not recording The red and display recording when any event occurs and the DVR starts recording While upgrading the system If the current system version is higher than the upgrade package file version you the DVR keeps rebooting and should reset the DVR first using the Factory Reset When using the Factory Reset the upgrade fails you will lose any settings you have saved Specifications Signal Format NTSC or PAL Auto Detect Video Input Composite 16 inputs 1 Vp p auto terminating 75 Ohms vou HDMI 1920x1080 1440x900 1280x1024 VGA 1920x1080 1440x900 1280x1024 Record Speed Real time 4801ps NTSC 400ips PAL D1 480ips NTSC 400ips PAL 960H Basic Quality e n i Full Duplex 480ips NTSC 400ips PAL CIF Maximum recording speed will decrease about 30 with Standard or more image quality INPUTS OUTPUTS Alarm Input 16 terminal programmable as NC or NO 2 4V NC or 0 3V NO
42. the DVR s system inputs and storage Refer to the previous Live Monitoring Status Monitoring section for details NOTE Selecting Status will only be enabled for a user who has System Check authority Data Source Selecting e Data Source in the Search menu allows you to select the data source to be searched Selecting Record searches recorded data on primary storage installed in the DVR and selecting Other searches recorded data on storage used for another DVR then installed in this DVR Exit Selecting E4 Exit in the Search menu exits the search mode and enters the live monitoring mode 67 User s Manual Event Log Search Event Log Search Time 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 Motion 8 2013 05 14 08 10 52 Motion 7 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 2013 05 14 08 10 52 Motion 2 Option Figure 48 Event Log Search screen The DVR maintains a log of each time the Alarm Input port is activated The Event Log Search screen displays this list Use the arrow buttons to highlight the event for which you would like to see video There is no determined user authority to display the Event Log Search screen however the event video will not be played unless a user with Search authority logs into the sy
43. the Display setup screen Main Monitor tab Camera Menu e PTZ Selecting Le Camera Menu PTZ and choosing the camera number allows you to control the selected camera as long as it has Pan Tilt and Zoom capabilities It is the same as pressing the button Refer to the following PTZ Mode section for details e Zoom Selecting 9 Camera Menu Zoom and choosing the camera number zooms the current image of the selected camera on the screen It is the same as pressing the button Selecting Zoom again in the Camera Menu again exits the Zoom mode Refer to the following Zoom Mode section for details e Audio Selecting 9 Camera Menu Audio toggles audio output On and Off e Color Control Selecting 9 Camera Menu Color Control and choosing the camera number allows you to control brightness contrast hue and saturation for each camera for the selected camera if a user who has Color Control authority logs into the system It is the same as pressing and holding a camera button for a few seconds e Edit Group Selecting Le Camera Menu Edit Group enters to the Active Cameo mode It is the same as pressing and holding the button for three seconds or longer in any multiview formats Refer to the following Active Cameo Mode section for details NOTE Itis important that cameras and monitors are correctly installed and adjusted prior to making any image adjustments using the DVR s controls Any image adjustments you make will be
44. the desired search parameter Refer to the Appendix Text In Search Examples for further information on setting up search parameters The 3 column can be used to delete a set of search parameter or entire sets of search parameters a Highlighting the Option box and pressing the button allows you to select Cave Sencitivo whether or not the search will find only text strings in which the case matches Exact Word find only exact words that match with the word you entered during text in setup Delete Duplicate Transactions or delete transactions duplicated within text input strings Close Highlight Load and press the button to load saved search option settings Select the desired search option settings Highlight Save and press the button to save the current search option settings A virtual keyboard appears that you can use to enter the search option name Once you set your desired search conditions highlight Search and press the 4 button to display the search results in the Text In Search screen Selecting Cancel exits the screen without saving the changes 73 User s Manual Bookmarks The Bookmarks screen can also be accessed by selecting Bookmark in the Search menu Bookmarks Bookmark Channels Figure 52 Bookmarks screen Highlight and press the Play Pause button to add the current playback point to the bookmark list Highlight the Title box and enter the name
45. 2 in the Camera setup screen General tab that camera appears to be Off unless a user with Covert Camera View authority logs into the system The camera title will be grayed out and status icons will not be displayed on the monitor NOTE When a camera is set up as Covert 1 the DVR displays the camera title and status icons on the covert video When set up as Covert 2 the DVR displays only the camera title on the covert video If a user who has Covert Camera View authority logs into the system the user can view video from cameras set to Covert 1 or Covert 2 including the camera titles and status icons Status Monitoring Selecting W Status in the Live Monitoring menu or Search menu displays the Event Status screen Event Status 2 s 4 5 6 7 2 3 5 5 7 2 3 5 6 7 1 J2 3 4 5 6 7 8 2 3 5 6 7 2 3 5 6 7 Panic Record Fan Error Disk Config Change Figure 44 Event Status Event Status screen The Event Status screen displays the status of the DVR s systems and inputs Events will be highlighted and related channels or events will flicker for five seconds when detected H Alarm In Ed Motion fa Video Loss 8 Video Blind and I Text In will be highlighted when each event is detected based on the settings you made in the Alarm In Motion Video Loss Video Blind and Text In se
46. 4 00 The Mode box allows you to set how the alarm reacts during the scheduled time When set to On the Alarm Out is active during the scheduled time When set to Event the Alarm Out is only active when there is an Event during the scheduled time The Channels box allows you to set which alarm outputs will be active You can also select the DVR s internal buzzer The 3 box allows you to delete an alarm output schedule You will be asked to confirm whether or not you really wish to delete the schedule Remote Control DEVICE Alarm Out Remote Control v Cancel Figure 26 Device Remote Control setup screen Highlight the box beside Port and select from None RS232 and RS485 Ifthe RS232 port and RS485 port are in use for PTZ control networking or text input the remote keyboard cannot be configured Highlight Setup and select the correct Baud Rate Parity Data Bits and Stop Bits for the device you are connecting to the DVR Highlight the box beside Remote Control Product and select the device from the list 40 Digital Video Recorder Network Setup General NETWORK WebGuard Remote Watch bpsfips 30 00 ips v ips 720 Kbps 5 6 Mbps Quality Standard Resolution Standard v Network Bandwidth Limit 1 Gbps Remote Audio Channel Select From RAS _JEnable SSL for Transferring Data
47. A virtual keyboard appears allowing you to enter the Group name You can use up to 15 characters including spaces in the group name Enter the name and assign authority levels to the group Highlighting the Authority box and pressing the button will toggle between all authority levels being turned On and Off Highlighting the individual authority level boxes and pressing the 4 button will toggle between that authority level being turned On and Off The authority levels that can be turned On and Off are New Group _JAuthority shutdown MUpgrade Color Control MSystem Check MPTZ Control MAlarm Out Control Covert Camera View Wsearch mM Clip Copy v Setup mM System Time Change M Data Clear mM PTZ Setup mM Alarm Out Setup mM Covert Camera Setup M Record Setup e Shutdown The user can shut the system down on a local system Upgrade The user can upgrade the software on a local system or a PC running RAS Color Control The user can control brightness contrast hue and saturation for cameras on a local system or a PC running RAS System Check The user can view the remote system status or check the remote system status as a batch process on a PC running RAS PTZ Control The user can control the PTZ camera on a local system or a PC running RAS Alarm Out Control The user can reset the DVR s outputs including the internal buzzer during an alarm by pressing the any button on the front
48. Compact View Mode screen will display The individual controls on the toolbar perform the following functions as described below a xz QABR dd gt b TT Y 20 34 25 41 Go to the previous image gt Play Pause Ib Go to the next image 4 Fast backward play Fast forward play Searching Video While in the search mode pressing the IMENUJ button displays the following Search menu on the right edge of the screen Pressing the MENU button again hides the menu You can navigate through menus and items by pressing the arrow buttons LA 1 Search 1 0 Go To gt 2 Bookmark 7 THO 4 Display E o Previous Group TA 7 Next Group Aro Alarm fe Pani y ax amera Menu 12 Export Sr 13 O Status 2 Data Source a3 Exit Figure 47 Search menu NOTE The Search menu also can be displayed by moving the mouse pointer on the right edge of the screen Search Menu Search e Event Log Search Selecting 143 Search Event Log Search selects video from the event log See the following Event Log Search section for details 65 User s Manual e Record Table Search Selecting IS Search Record Table Search selects using a recording table See the following Record Table Search section for details e Motion Search Selecting 39 Search Motion Search selects motion events See the following Motion Search section for details e Text In Search Selecting 539 Search Text In Search
49. DIGITAL VIDEO RECORDER 16 CHANNEL MODEL USER S MANUAL Digital Video Recorder WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance COMPLIANCE NOTICE OF FCC THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE PURSUANT TO PART 15 OF THE FCC RULES THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT THIS EQUIPMENT GENERATES USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE WARNING
50. Digital Video Recorder If you selected the Quick wizard selecting the Next button starts the Quick Setup Wizard Quick Setup Wizard Step 1 3 Date Time Setup Date 2013 06 10 Format y Time 22 52 46 Format y Time Zone GMT 05 00 Eastern Time US amp Canada MlUse Daylight Saving Time Cancel Date Time Setup Date Set the system date and select the date format Time Set the system time and select the time format Time Zone Select your time zone The Time Zone can be selected on the map Use Daylight Saving Time Selecting the box sets the system to use daylight saving time NOTE The Date Time will be set and the clock will start when you click the Next button Quick Setup Wizard Step 2 3 Record Method Setup Which recording method would you prefer to use Motion Event Record Recommended Continuous amp Motion Event Record O Continuous Record Motion Event Record means that the system will record when a Motion Event is detected Generally video quality is more important for Motion Event Recording than it is for Continuous Recording so the system records at a higher quality for Motion Events 17 User s Manual Record Method Setup e Select the desired recording mode from Motion Event Record Recommended Continuous amp Motion Event Record Continuous Record NOTE You should understand each recording mode before setting the DVR s recor
51. ENU button and selecting 4 Advanced PTZ in the menu Speed displaying at the top of the screen displays the Advanced PTZ menu Auto Pan Lc Set the feature you wish to control by selecting it from the menu Refer to the camera manufacturer s Pattern Te instructions for the proper settings Depending on the camera specifications some features may Light not be supported Pump NOTE The Pan Tilt speed can be controlled by using the mouse While in the PTZ mode Wiper Power clicking the left mouse button on the image and dragging the mouse in the pan tilt direction Aux you want to move and then select the speed Move to Origin PTZ Control You can use a mouse for convenient PTZ control Click the left mouse button on the image and move that image in the direction you want to by dragging the mouse Use the mouse wheel to zoom in and out Position the mouse pointer at the bottom of the screen and the following PTZ toolbar will display Clicking ME on the left side exits the toolbar If you want to display the toolbar again position the mouse pointer at the bottom of the screen Change the toolbar location by clicking the empty space on the left side of the toolbar and drag it to where you want it located on the screen Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you want The other controls on the toolbar perform as described below m Zoom In Out lt x
52. Highlighting boxes under Dwell and pressing the button allows you to set the length of time you would like to record for the associated event Advanced Mode Only Pre Event Quality Resolution Dwell E ips 30 00 ips _ Standard _ Standard i 00 min 05 sec Z gt 3 QIK IKK K K K SS NS ES 30 00 ips _ Standard _ Standard y b Orn S 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 00 min 05 sec 4 gt 4 ar ap Arm LA rmL Am L a mL aD aml aml aml aml a 4 Save Cancel Figure 16 Record Pre Event setup screen When the DVR is in the Event Record mode it is possible to have it record images before the event occurs The Pre Event screen allows you to define how to handle pre event recording If you do not have Event set up in the Record Schedule a message will display alerting you to this fact You can turn individual cameras On or Off for pre event recording The image speed can be set from 1 00 to 30 00 ips 25 00 ips PAL image quality can be selectable from Very High High Standard and Basic and image resolution can be selectable from Very High D1 High Half D1 and Standard CIF You can set the amount of time to re
53. P Address or domain name of the FEN Server from your network administrator You can use the domain name instead of IP address if you already set up the DNS Server when setting up the LAN Highlight the box beside Port and press the button Set the port number of the FEN server using the Up and Down arrow buttons to increase or decrease the numbers Highlight the box beside FEN Name and press the button A virtual keyboard appears allowing you to enter the DVR name to be registered on the DVRNS DVR Name Service server Highlight the Check box and press the button to check whether or not the name you entered can be used NOTE The FEN Name you entered should be checked by selecting Check otherwise the FEN changes will not be saved When entering no name or a name already registered on the DVRNS server an error message displays The box beside Status displays the current information of the Rendezvous server and NAT Network Address Translation device 44 Digital Video Recorder RTSP NETWORK General WebGuard Enable RTSP Cancel Figure 30 Network RTSP setup screen Highlight Enable RTSP Real Time Streaming Protocol and press the button to toggle between On and Off You will be able to change the settings if Enable RTSP is enabled Highlight the box beside RTSP Port and press the button Set the port number of the RTSP server obtained from your system adm
54. Video Quality Priority Profile SRP Standard Recording Profile LRTPP Longer Recording Time Priority Profile 18 Digital Video Recorder Quick Setup Wizard Now you have completed setup for basic operation Click the Finish button to finish the wizard or click the Go to Network Setup button to start the Network Setup Cancel Go to Network Setup Select the Finish button to finish the Quick Setup Wizard and select the Go to Network Setup button to start the Network Setup Network Setup Wizard Network Wizard will help configure the DVR for your Network Please make sure to connect an Ethernet cable between your DVR and Router DSL Modem or Cable Modem The wizard includes LAN Setup UPnP Port forwarding Setup FEN Setup DVRNS Setup Click the Next button to start the wizard Cancel If you selected the Go to Network Setup select the Next button to start the Network Setup Wizard Network Setup Wizard Step 1 3 Internet Connection Is your DVR connected to the Internet Yes I will use an Internet connection ONo I will Not use an Internet connection 19 User s Manual Internet Connection Select whether or not your DVR is connected to the Internet Network Setup Wizard Step 2 3 LAN Setup Auto Configuration Get IP Gateway Subnet Mask Use DSL PPPoE Setup Search DNS Server Check Internet connectivity Sea
55. XD Receive Data TXD Transmit Data Male Female GND Ground RS485 Port The DVR can be controlled remotely by an external device or control system such as a control keyboard ia using RS485 half duplex serial communications signals The RS485 connector can also be used to control al PTZ pan tilt zoom cameras Connect RX TX and RX TX of the control system to the and respectively of the DVR See Chapter 3 Configuration and the PTZ camera or remote controller manufacture s manual for configuring the RS485 connection Connector Pin Outs Master Unit Slave Unit o gt TX RX gt To gt TX RX User s Manual Power Cord Connector Connect the connector of the adaptor to the DVR and connect the AC power cord to the adaptor and then to the wall outlet WARNING ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET THE POWER CORD HAS A GROUNDING PIN IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN RECEPTACLE DO NOT MODIFY THE PLUG DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT Your DVR is now ready to operate Refer to Chapter 3 Configuration and Chapter 4 Operation Digital Video Recorder Chapter 3 Configuration NOTE Your DVR should be completely installed before proceeding Refer to Chapter 2 Installation Fron
56. Z mode and press the button again to exit the PTZ mode Select the PTZ camera you wish to control by selecting it from the menu The icon P displays on the PTZ camera screen To use the front panel buttons press the Left and Right arrow buttons to pan left and right Press the Up and Down arrow buttons to tilt the camera up and down Press the aa button to zoom in and press the button to zoom out You can use the lx and IZ buttons to focus the image You can establish preset positions for PTZ cameras Press the to establish Presets You can quickly move PTZ cameras to Preset positions Press the to view an established camera Preset position Figure 42 PTZ Select Camera menu 60 Digital Video Recorder You can save camera position settings as presets so that you can go directly to desired views Once you have the camera at the desired settings press the button and the Set Preset dialog box will appear Select the number you want to assign to the preset and press the Play Pause button Use the virtual keyboard to enter the preset name SetPreset 1 2 3 4 5 6 7 8 9 Press the button to load the PTZ preset and the Move to Preset dialog box will appear Select the desired preset and press the button to load the preset Set Preset lt Set Preset gt lt Move to Preset gt Figure 43 PTZ Preset menu Advanced PTZ While in the PTZ mode pressing the M
57. ack Buttons e Rewind Pressing the button plays video backward at high speed Pressing the button again toggles the playback speed from 44 444 and dea e Play Pause Pressing the button plays back video at regular speed and pressing the button again pauses video The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back video e Fast Forward Pressing the gt gt button plays video forward at high speed Pressing the button again toggles the playback speed from PP gt gt gt and PPPP e Stop Pressing the IM button stops playback and enters the Live Monitoring mode e Backward When in the pause mode pressing the 1 button moves to the previous image e Forward When in the pause mode pressing the Lt button moves to the next image In the Live Monitoring mode pressing any playback button enters to the Search mode 10 Digital Video Recorder Panic Button Pressing the PANIC button starts panic recoding of all camera channels and displays Y on the screen Pressing the button again will stop panic recording Layout Button Pressing the LAYOUT button toggles between different display formats The available formats are 4x4 3x3 1 7 1 5 2x2 and PIP Zoom Button Pressing the button zooms the current image on the screen A PIP with a rectangle temporarily displays showing what area of the screen has been enlarged You can use the arrow buttons to
58. allows you to select your time server from a list of registered time servers NOTE You can use the domain name instead of IP address if you already set up the DNS Server when setting up the LAN Highlight the box beside Interval and press the button Set the time interval for synchronization from 30 minutes to 1 day at various time intervals Last Sync Time displays the last time the DVR was synchronized with the time server Highlight Run as Server and press the button Pressing the button toggles between On and Off When it is On the DVR you are setting up will run as a time server 22 Digital Video Recorder Highlighting Holiday and pressing the button displays the Holiday screen You can set up holidays by highlighting and pressing the button The current date appears Holiday No Highlight the month and day and change them by using the Up and Down arrow buttons Press the button to add the date Dates can be deleted by highlighting the MX beside the date and pressing the button NOTE Holidays that do not fall on the same date each year should be updated once the current year s holiday has passed Cancel SYSTEM Group amp User Administrator Auto Login Never Auto Logout Never Cancel Figure 10 System User setup screen The column is used to collapse and expand user groups If there is a or
59. as in a cameo window This can be done with one camera displayed full screen while displaying the cameo window as a PIP picture in picture or displaying the cameras in a grid pattern with the bottom right window as the cameo NOTE Sequence cannot be used in the 4x4 display mode 99 User s Manual You can adjust the display dwell time by highlighting the box beside Interval and pressing the button You can select dwell intervals ranging from 1 second to 1 minute Highlight Event Monitoring On and press the button Pressing the 4 button toggles between On and Off When it is On the DVR will display the camera associated with the event when an event occurs Highlight the box beside Resolution and press the button You can select from 1280x1024 1440x900 and 1920x1080 for NTSC video and 1280x1024 1440x900 and 1920x1080 60Hz or 50Hz for PAL video NOTE When the individual main monitors are connected to the HDMI and VGA connectors for simultaneous operation it is recommended to use monitors supported with the same resolution If monitors unsupported with the same resolution are connected video cannot be displayed on the monitor with the resolution you have set Highlight Fit To Screen and press the 4 button Pressing the button toggles between On and Off When it is On the DVR will resize video to fit the main monitor screen 56 Digital Video Recorder Chapter 4 Operation NOTE This chapter assu
60. ayed at regular speed You can also narrow your event search by selecting the Option button and setting up the new search condition Text In Search Option From First To Last Channels Generic Text Name Column Load Save Search You can search video from the first to last recorded images or you can set the start and stop times and dates Highlight the box beside From and press the button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the first recorded image When highlighting and pressing the 4 button the bookmark list displays and the bookmark point you selected will be the starting date and time Highlight the box beside To and press the button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the last recorded image When highlighting and pressing the button the bookmark list displays and the bookmark point you selected will be the ending date and time Highlight the Channel and press the button Select the text in devices that you want to search for text input Highlight the Text Input Device box and press the button Select your Text Input Device from the list Highlighting the and pressing the 4 button allows you to add a new set of search parameter Set up
61. b you can download the file from the registered NetFS site Highlight Upgrade and press the button Select USB Storage or NetFS If you select NetFS select a NetFS site from the registered NetFS site list The Upgrade screen appears The screen displays the upgrade package file names that are available The rui indicates that the file is for software upgrades Upgrade Select a package Package Upgrade rui v Install Cancel Select the desired file and press the 4 button Highlighting the Install button and pressing the button will install the selected software package Highlighting the Cancel button and pressing the button will close the window without upgrading the software Ifthe upgrade package file 1s not installed on the DVR properly you will get an error message The system restarts automatically after completing the upgrade CAUTION The USB device must be FAT16 or FAT32 format Y ou can import saved DVR settings or export the current DVR settings To import saved DVR settings connect the USB device containing the setup file dat to the DVR If you enabled the NetFS function Network menu gt NetFS tab you can download the setup file from the registered NetFS site Highlight Setup Import and press the button Select USB Storage or NetFS If you select NetFS select a NetES site from the registered NetES site list Select the desired setup file and press the Import button to
62. ble Search ccccccccscccececeeeccuseeceeeceueecueceucecsuecueessueesaeeseueesseessueeseeessueeseeesaueensas 69 MOON SEALI sasson toe a a a a eo nec aN etre 71 MTS WIT o ia 72 BOOKING KS ss6e e ae drenan 14 AS O a O onc rane E cena sae smaaneiaseteataneonan ons 74 aio AAA uo a O aa tadetec cle 76 O e PI eer eee en er rere 17 USB Hard Disk Dive Preparation spin ds 17 TEXT ASC arch ExXamples a dd E e E o 17 Soare N EXAMP T cidad 17 Search Example Mein dl E E Ea 78 WE ci ltd 79 Web MONITORING MOJO resina A E ad eat 80 Web Search Mode x ccccsainu soacescassagarcagiaseectabatnandbacdsanesdacongnadestanadeandsaadeemeaase aeqnasdecesaaeoaconsiee 81 MS Ovela a a a Rt en en 83 ENOrCOde atk a eee ll ee re ere ee 83 DV SECT Log NOU CCS cool sostiene caia E 84 Map Ol SCEN ra ds it cid coe ib 85 ota A eA Ae o dnt etna ue dend itgemaets exiand eee cnraiieuecees eeacmietee heats 86 SPECINCAUON S APA OOOO O a sane ainenengano A 86 List of Illustrations Figures IVBICAL LON RIAS tal Nin A AA 2 EIQUIO 2 DVR fear panek rai AAA AA 3 FOUSS DVR ONE panel A ET N 7 Figure 4 Inirared remote COn Old le 9 A A TO 12 FOSO LOGOUE screen il si as 12 Foure 7 Setup SCR CI sc aa a e da ob aa 12 Figure 8 System General setup Screen cccccsececcceececceeececceuseecseueeesauseecseueeesseueeessueeeesaueeessaageessaaes 13 Figure 9 System Date Time Setup screen cccccceececceeseeecceeseeceeneeecaucecseaeeessueeessa
63. ches to the Standard view mode Selecting or El located at the bottom zooms the record table Selecting El displays eight hours 12 hours with 1920x1080 resolution 1 minute based and selecting El displays 24 hours 3 minute based at once To move to earlier or later times that are not shown in the current record table screen select the arrows located at the end of the times by using the arrow buttons on the front panel NOTE If the DVR has images recorded in more than one recording mode in the same time range the recording status bar displays recording information in the following priority order Panic gt Pre Event gt Event gt Time The color of the bar indicates different recording modes Red for Panic Yellow for Pre Event Purple for Event and Blue for Time Selecting EB located at the bottom displays the Calendar Search screen Days with recorded video display on the calendar with white numbers You can highlight the days with recorded video by using the arrow buttons Once you have highlighted a day press the Play Pause button to select it The first recorded image of the selected date will pause on the screen Once you have selected the date you want to search review the surrounding video by using the playback controls located at the bottom of the Record Table Search screen Calendar Search Selecting F located at the bottom displays the Search menu 70 Digital Video Recorder e Go To Dis
64. chnician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 15 Safety Check Upon completion of any service or repairs to this equipment ask the service technician to perform safety checks to determine that the equipment is in proper operating condition 16 Field Installation This installation should be made by a qualified service person and should conform to all local codes 17 Correct Batteries Warning Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 18 Tmra A manufacturer s maximum recommended ambient temperature Tmra for the equipment must be specified so that the customer and installer may determine a suitable maximum operating environment for the equipment WEEE Waste Electrical amp Electronic Equipment Correct Disposal of This Product Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources
65. cord prior to the event by adjusting the Dwell You can set the Dwell from 5 seconds to 30 minutes The longer the dwell set the fewer maximum ips can be set NOTE When the DVR is in the Time or Time amp Event mode it ignores the pre event settings and follows the time settings 30 Digital Video Recorder Event Setup Motion No Sensitivity Zone Min Blocks Zone View Actions as J e Jo on J O oA E J e J on J O GA as J e J on O GA oos J e Jo on J O oA as J e J on J O oA as o es J on J O oA as o es J on J O GA oos J e J on O oa oas J e J on O oA oas J es J on J O oA oas J e J on O oA oas J es J on J O oa as J es o aa J O oA oas J e J on J O oA as o es o aa J O oA 313 192 1i g Q Motion Ignoring Interval 2 sec v Daytime Setup Save Cancel lt J lt SSI SES h h lt I X K K K K Figure 17 Event Motion setup screen Your DVR has built in video motion detection Video motion detection can be turned On or Off for each camera Motion Detection 1 Sensitivity Highlighting the box under the Sensitivity heading and pressing the button Daytime 3 allows you to adjust the DVR s sensitivity to motion for Daytime and Nighttime Nighttime 3 independen
66. corder Device Setup Audio DEVICE Associated Camera Enable Audio Out Figure 24 Device Audio setup screen The DVR can record up to four audio inputs Highlight the box beside the input and press the button A list of cameras appears and you can select which camera you want associated with that audio input Highlight Enable Audio Out and press the button This toggles between enabling and disabling audio out Alarm Out DEVICE Alarm Out Remote Control Dwell Time 5 sec z Figure 25 Device Alarm Out setup screen Highlighting the box beside Dwell Time and pressing the button allows you to set the dwell time of the alarm output Dwell times range from 5 seconds to 30 minutes Each alarm output can be given its own title by highlighting Title and pressing the button A virtual keyboard appears allowing you to enter the title 39 User s Manual You can add and edit alarm output schedules on this screen Highlight the and press the button to add a schedule Highlighting the boxes under the Column heading and pressing the button allows you to edit the information in those boxes The Day box allows you to select the days that the alarm schedule will be active The choices are Sun Mon Tue Wed Thu Fri Sat M F Hol and All The Range box allows you to set the time that the alarm schedule will be active in 15 minute increments from 00 00 to 2
67. creen Highlight Use WebGuard Service and press the button to toggle between On and Off See Appendix WebGuard for detailed descriptions of the WebGuard service Highlight the box beside Port and press the button Set the port number used when accessing WebGuard by using the Up and Down arrow buttons to increase or decrease the numbers NetFS It allows you to register NetFS sites for the following functions e Upload or download of files for upgrade import export of a setup file log export or file print on an FTP site or from an FTP site Related settings are as follows Setup in the live monitoring mode gt System menu gt General tab gt Upgrade Import Export or System Log Export setting Export in the search mode gt Print e Upload of clip copy files on a FTP site Related settings are as follows Export in the search mode gt A B Clip Copy or Clip Copy e FTP notification of an event detection system event excluded Related settings are as follows EZ Setup in the live monitoring mode gt Notification menu gt FTP tab gt FTP setting Setup in the live monitoring mode gt Event menu gt Actions Notify FTP setting NOTE FileZilla and smallFtp servers are currently supported This feature is supported only in the passive mode of an FTP site 46 Digital Video Recorder NETWORK General WebGuard Use NetFS Cancel Figure 32 Network
68. cus Near Focus Far M E Set Preset Go to Preset Digital Video Recorder Click the ES to save the current image as a bitmap or JPEG file format Click the BH to set up the image drawing mode OSD display and beep on off You can adjust the display speed by changing the image drawing mode select OSD information to be displayed on the screen and turn the DVR s internal buzzer on and off from a remote site 12 The event status window at the bottom displays a list of events that were detected from the remote site 13 Selecting a camera on the screen and clicking the right mouse button displays the text menu screen Gace e Change Camera Title Changes the camera name e Enable Audio Enables audio communication with the remote site When the audio control panel displays click the L to send audio to the connected remote site and Aspect Ratio click the button again to stop sending audio Click the to monitor live audio from Anti Aliasing Screen the connected remote site through the attached speaker and click the button again stop monitoring live audio Clicking both 3 and allows two way communication Clicking the disables audio communication e Aspect Ratio Changes the image aspect ratio e Anti Aliasing Screen Enhances image display quality by eliminating stair stepping aliasing effects in the enlarged image Enable Audio NOTE Acamera name change in the Web Watch mode does not affect the camera name se
69. ding method Quick Setup Wizard Step 3 3 Record Video Quality Setup Which video quality profile would you prefer to use High Video Quality Priority Profile HVQPP O Standard Recording Profile SRP O Longer Recording Time Priority Profile LRTPP The HVQPP provides the highest video quality recording at that highest frame rate but requires more hard disk space than the LRTPP Please see the User s Manual for details Cancel Record Video Quality Setup e Select the desired video quality profile from Higher Video Quality Priority Profile Standard Recording Profile Longer Recording Time Priority Profile NOTE The higher quality setting requires more storage space The recording resolution will be set to Very High when selecting High Video Quality Priority Profile High when selecting Standard Recording Profile and Standard when selecting Longer Recording Time Priority Profile NOTE The recording quality and recording speed of each camera channel will be set as show below according to the Record Method and Record Video Quality you set IE HVOPP RTPP Motion Event Record Very High 30 ips High 5 ips Standard 3 ips Continuous amp Motion Very High 30 ips Time High 5 ips Time Standard 3 ips Time Event Record Very High 30 ips Event Very High 30 ips Event High 5 ips Event Continuous Record Very High 30 ips High 5 ips Standard 3 ips Record Video Quality HVQPP High
70. dio Channel and pressing the button allows you to select the audio channel that sends audio to the remote site Selecting Select From RAS will send audio of the channel selected from RAS NOTE Depending on network conditions audio might be interrupted or out of synchronization during transmission Highlight Enable SSL for Transferring Data and press the button to toggle between On and Off When it is On the security of data except video and audio transmitted for remote monitoring or remote recording can be enhanced by using the SSL Secure Sockets Layer authentication When using the SSL function the DVR cannot be connected with a remote program or a network keyboard which does not support the SSL function CAUTION The remote connection will be disconnected temporarily after changing the SSL settings 41 User s Manual NOTE While the SSL function is enabled the network transfer speed you selected may not be achieved This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org LAN NETWORK WebGuard Type Manual IP Address 192 168 1 129 MAC Address 00 03 22 12 F2 AF Gateway 192 168 1 254 Subnet Mask 255 255 255 0 DNS Server 0 0 0 0 Port Number Setup Use UPnP Cancel Figure 28 Network LAN setup screen Highlight the box beside Type and press
71. display mode is the same as pressing the button or scrolling the mouse wheel up and down when in one of the multiview formats 1 e 2x2 1 5 1 7 3x3 or 4x4 NOTE In the 1 5 or 1 7 display mode the main channel indicates the channel displayed on the large screen which is displayed in the top left You can select the camera you want to display on the main channel screen Select a channel on the screen and click the right mouse button to display the Camera Menu Selecting Go To Main swaps the selected channel with the main channel This function is supported only in the 1 5 and 1 7 display modes and can be activated from any of channel screens except the main channel screen e Camera OSD Status OSD Selecting E3 Display gt Camera OSD or Status OSD toggles Camera OSD or Status OSD On and Off Previous Group Next Group Selecting M or M4 Previous Group or Next Group in the Live Monitoring menu moves to the previous or next page It is the same as pressing the GROUP button Freeze Selecting k Freeze in the Live Monitoring menu will freeze the current image on the screen until you select 4 again It is the same as pressing the Play Pause button Pressing any button except for the MENU and PANIC buttons while in the Freeze mode can also exit the Freeze mode While in the Freeze mode the icon displays in bottom left corner if Freeze is selected in the Display setup screen OSD tab Alarm Selecting a Alarm in the Live M
72. e Logout screen displays asking you to confirm whether or not you want to log out the current user Are you sure you want to log out admin Figure 6 Logout screen Setup Screen a System Record Event 4 Camera Device Network Notification Display Figure 7 Setup screen 12 Digital Video Recorder Press the MENU button or move the mouse pointer on the right edge of the screen and then select k24 Setup in the Live Monitoring menu to enter the setup screen While setting up the DVR there will be many opportunities to enter names and titles When making these entries a Virtual Keyboard will appear Use the arrow keys to highlight the character you want in the name or title and press the 4 button That character appears in the title bar and the cursor moves to the next position Pressing 4 toggles between the upper and lower case keyboards 4 backspaces and Ak deletes entered characters Pressing toggles between different keyboard layouts You can use up to 31 characters including spaces in your title Special characters can be created using and a capital letter e g J for NL New Line M for CR Carriage Return Special characters are commonly used by text input devices and will be useful when performing Text In Searches System Setup General SYSTEM Site ll System ID 0 a Language English gt Version 1 0 0 Upgrade Setup Import Export
73. e a standard multi sync computer monitor as your main monitor Use the cable supplied with your monitor to connect it to the DVR NOTE Connect the monitor before the DVR boots so that video can be displayed on the monitor with the resolution you have set during system setup If you want to use both the HDMI and VGA Monitor connectors one of the monitors should be connected before the DVR boots and the other monitor should be connected after the DVR boots Network Port paa The DVR can be networked using the 10Mb 100Mb 1Gb Ethernet connector Connect a Cat5 cable with an RJ 45 jack to the DVR connector The DVR can be networked with a computer for remote monitoring searching configuration and software upgrades See Chapter 3 Configuration for configuring the Ethernet connections CAUTION The network connector is not designed to be connected directly with cable or wire intended for outdoor use RS232 Port An RS232 port is provided to connect remote control devices such as a control keyboard PTZ cameras or text in devices can also be connected to the RS232 port See Chapter 3 Configuration and the PTZ camera BEI eee text in device or remote controller manufacturer s manual for configuring the RS232 connection Connector Pin Outs Master Unit Slave Unit RX gt TXD TX gt To gt RXD GND gt To gt GND NOTE Refer to the following for pin out details for the 9 pin connector of the slave unit dE E R
74. e screen format to select the desired display mode Click the Bl to enter the time lapse search mode which allows you to search for recorded data by hour time and then play back images found within the time parameters The Timetable window located minute at the bottom displays the time information for the image of the date selected on the calendar second If more than one video stream in the same time range you can select the video stream you want to search Clicking a specific time displays the image recorded at that time on the screen Selecting the E allows you to display an image from a specific time So To Cancel 9 Click the Eal to enter the event search mode which allows you to search for event log entries using specific conditions and play back the images associated with those event entries Click the E to set up the image drawing mode and OSD display You can adjust the display speed by changing the image drawing mode and select OSD information to be displayed on the screen Click the B to save any video clip of recorded data as an executable file or click the E to save the current image in a bitmap or JPEG file format NOTE When saving as an executable file selecting the Exclude Player option will reduce the file size and its saving time You can download the Player program to review the video clip by entering the following information in the address field of Internet Explorer When using the DVRNS h
75. earch for Coke with a Qty Quantity of more than 1 and Hotdog with an amount totaling amount over 8 the following search condition can be set 78 Text In Search Option From To Channels Generic Text v Cancel Name Value Coke Hotdog Search Cancel Digital Video Recorder WebGuard WebGuard allows you to access a remote DVR monitor live video images and search recorded video using Internet Explorer web browser anytime from virtually anywhere Computer system requirements for using the WebGuard program are e Operating System Microsoft Windows XP Service Pack 3 Microsoft Windows Vista Service Pack 1 Microsoft Windows 7 Home Premium Professional Ultimate or Microsoft Windows 8 Pro Enterprise e CPU Intel Pentium HI Celeron 600MHz or faster e RAM 128MB or higher e VGA 8MB or higher 1024x768 24bpp or higher e Internet Explorer Version 6 0 or later 32 Bit Start Internet Explorer on your local PC You can run the WebGuard program by entering the following information in the address field http IP address port number The DVR IP address and the WebGuard port number default 12088 set in the Network setup screen WebGuard tab Or http DVRNS server address DVR name The DVRNS server address and the DVR name
76. ecorder Highlight the box beside To and press the 4 button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the last recorded image When highlighting and pressing the button the bookmark list displays and the bookmark point you selected will be the ending date and time Highlight the box beside Check Time Overlap and press the button It toggles between On and Off You will only be able to turn the Check Time Overlap on or off if a user defined date and time is set to From and To If the DVR s date and time have been reset 1t is possible for the DVR to have more than one overlapping start and stop time When set to On you will be asked to select one of the overlapping start and stop time When set to Off the DVR will display search results from all start times to all stop times Highlight the box beside Alarm In and press the button You can select the alarm inputs that you want to include in your search Highlight the box beside Motion and press the button You can select the cameras for which you want any reports of motion Highlight the box beside Video Loss and press the button You can select the cameras for which you want any reports of lost video Highlight the box beside Video Blind and press the button You can select the cameras for which you want any reports of blind video Highlight the box beside Text In and press the
77. ected will be the ending date and time Highlight the box beside Channels and press the 4 button You can select the cameras that you would like to include in your video clip Highlight the box beside Password and press the button A virtual keyboard appears allowing you to enter the password for reviewing the video clips Highlight the box beside Dest and press the button You can select the storage device or a NetFS site on which you would like to record the video clip If you enabled the NetFS function Network menu gt NetFS tab and set the Use setting to ALL or Clip Copy you can copy video clips to the NetFS site If you select NetFS select a NetFS site from the registered NetFS site list CAUTION The USB device for clip copy must be FAT 16 or FAT32 format NOTE When copying video clips on a NetFS site you cannot check the disk volume of the NetFS site for the video clips to be uploaded The DVR displays the volume as 30GB regardless of the actual disk volume If upload fails after video clips are copied the copied video clips will be deleted If the same file exists video clips will not be copied The DVR automatically assigns a file name to the video clip However you can give the video clip file a different name Highlight the box beside File Name and press the button A virtual keyboard appears Enter a file name for the video you are backing up and select Close The DVR will automatically add the camera number for
78. een The DVR checks to see if anything is blinding a camera Highlighting the box under the Sensitivity heading allows you to adjust the DVR s sensitivity to video blind for Black and White independently from 0 Never and 1 least sensitive to 15 most sensitive NOTE Video blind might NOT be detected for a camera with a very noisy image especially when set for low sensitivity values Highlighting the box under the Activation Time heading allows you to set the duration before the DVR will report a Video Blind The DVR will not consider any blinded camera to be a Video Blind if the detected blindness is less than the Activation Time set on this screen Highlight the box under the Actions and press the button The DVR can be set to react to video blind differently for each camera Each camera can be associated with another camera trigger an Alarm Out connector sound the DVR s internal buzzer notify a number of different devices and or move PTZ cameras to preset positions Highlight Use Ignoring Time and press the button to toggle between On and Off When set to On the DVR will ignore video blind events occurred during the preset period Highlighting Time Setup and press the button allows you to set up event ignoring time 34 Digital Video Recorder Text In o CON a a a win Setup Y Title Actions Save Cancel Figure 21 Event Text In setup screen The DVR ca
79. elect the percentage level of disk usage at which you want the DVR to trigger an alert Percentage levels range from 80 to 99 Highlight the Settings box beside Disk Bad and press the button Select percentage level of bad disk sectors at which you want the DVR to trigger an alert Percentage levels range from 10 to 90 26 Digital Video Recorder Highlight the Settings box beside Disk Temperature and press the button Select the temperature of hard disk drive at which you want the DVR to trigger an alert if the temperature exceeds the defined threshold Refer to the hard disk drive manufacturer s documentation for the correct temperature setting The DVR can be set to react to system events Highlight the Actions box beside the desired event and press the button System events can be associated with an Alarm Out connector sound the DVR s internal buzzer and or notify a number of different devices NOTE Alarm Out action cannot be set to System Boot Up Restart Shutdown and Panic Record events Mail notify is the only option available for the System event Alert Window notify cannot be set to System Boot Up Restart and Shutdown events For the Notify action to work the DVR should be registered in the RAS Remote Administration System Recording Setup General RECORD MRecycle Event Record Dwell 5 sec Record Audio Auto Deletion HA 0 E Never Limit Time Lapse Recording Never
80. elected camera to display full screen Buttons 1 to 9 are also used to enter passwords In the PTZ mode pressing the button 1 zooms in the screen and the button 2 zooms out the screen pressing the button 3 focuses near and button 4 focuses far and pressing the button 5 moves to the preset and button 6 saves the preset HDD LED The HDD LED flickers when the DVR is recording or searching video on the hard disk drive Alarm LED The Alarm LED is lit when alarm output or internal buzzer 1s activated User s Manual Arrow Buttons These buttons are used to navigate through menus and GUI You can also use them to change numbers by highlighting a number in the menu and using the Up and Down arrow buttons to increase or decrease the number s value These buttons are also used to control Pan and Tilt when in the PTZ mode When in the PIP display format pressing the Up and Down arrow buttons moves the position of the small screen counter clockwise and clockwise and pressing the Left and Right buttons changes the PIP screen size In the playback mode pressing the d button plays video backward at high speed Pressing the button again toggles the playback speed from 44 444 and 4444 The screen displays 44 444 and 4444 respectively Pressing the PP button plays video forward at high speed Pressing the button again toggles the playback speed from gt gt PPP and PP gt P gt P The screen displays gt gt PPP and PPP respectively When in t
81. ent due to lightning and power line surges 10 Overloading Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock 11 Objects and Liquids Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the equipment 12 Servicing Do not attempt to service this equipment yourself Refer all servicing to qualified service personnel 13 Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or the plug has been damaged B If liquid is spilled or objects have fallen into the equipment C If the equipment has been exposed to rain or water D If the equipment does not operate normally by following the operating instructions adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation If the equipment has been dropped or the cabinet damaged When the equipment exhibits a distinct change in performance this indicates a need for service 14 Replacement Parts When replacement parts are required be sure the service te
82. et Options gt General tab and then run WebGuard again There might be a problem that the bottom of WebGuard page is cropped due to the address or status bars In this situation it is recommended that websites open windows without address or status bars by changing the internet setting Go to the Tools gt Internet Options gt Security tab gt Click the Custom level button gt Select Enable for the Allow websites to open windows without address or status bars option When running WebGuard in the Microsoft Windows Vista or higher operating system it is recommended to start Internet Explorer with elevated administrator permissions Click the right mouse button on the Internet Explorer icon and select the Run as administrator option from the context menu Otherwise some functions of the WebGuard might be limited to use 79 User s Manual NOTE There might be a problem with screen display or screen update due to low image transmission speed when using the Microsoft Windows Vista or higher operating system In this situation it is recommended that you disable the Auto Tuning capability of your computer Run the Command Prompt with elevated administrator permissions Go to the Start Menu gt Accessories gt Command Prompt gt Click the right mouse button and select the Run as administrator option Then enter netsh int tcp set global autotuninglevel disable and hit the enter key Restart your computer to apply the changes I
83. f you want to enable the Auto Tuning capability again enter netsh int tcp set global autotuninglevel normal after running the Command Prompt with elevated administrator permissions Restart your computer to apply the changes Web Monitoring Mode WebWatch is a remote web monitoring program that allows you to monitor live video transmitted in real time from the remote DVR 10043 ADMONO Contrast Brightness T Web Watch Windows Internet Explorer e http 10 0 12 26 12088 watch htm 10 0 10 95 2008 11 03 3 57 10 0 10 95 2008 11 0 10 0 10 95 2008 11 0 0 5 A gt 03 Click the gj to log out the WebGuard program Click the to access to the web search mode Position the mouse pointer on the WebWatch logo to see the version of the WebGuard program The DVR information window displays the login information of WebGuard Click the screen format to select the desired display mode When changing the screen format the selected camera on the current screen will be located in the first cell of the new layout Click the camera button to select the camera to be viewed Click the El to adjust the brightness contrast saturation and hue of monitoring image Click the to control pan tilt and zoom of the camera from a remote site Click the to control alarm out devices at the remote site Saturation Hue Move Buttons ON OFF ON OFF a Zoom Out Zoom In Iris Close Iris Open Al Undo Fo
84. fected by the Motion Ignoring function Highlighting Daytime Setup and pressing the button allows you to set up the Daytime range Highlight the box beside Daytime and press the 4 button Use the Daytime 09 00 18 00 Up and Down arrow buttons to set the Daytime range The DVR will consider the remaining time range as the Nighttime Daytime Setup Alarm In Title Type 9 Alarm In 7 Alarm In 8 989085888 zZ o zZ Z Z Z Z Z Z Z Z2 Z 2Z2 2Z 2Z Z o oO aoja a O OQ O O OO IET ETIET a le fe le fe le le la le fa le fa le la k k k Alarm In 16 Save Cancel Figure 18 Event Alarm In setup screen 32 Digital Video Recorder The alarm terminal strip on the back of the DVR has inputs associated with each alarm You can set up each input on the Alarm In screen You can turn each input On or Off by highlighting the alarm number and pressing the button Each input can be given a title Highlight the desired Title box and press the button A virtual keyboard appears allowing you to enter a title name Each input can be set as NO normally open or NC normally closed Highlight the box under the Actions and press the button You can set the actions the DVR will take whenever it senses an input on one of its alarm input connectors Alarm input can be associated with cameras trigger an Alarm Out connector sound the DVR s internal buzzer notify a number of
85. g changes Reverse All Zone View OK Cancel a a You can adjust the minimum number of detection blocks that must be Dime activated to trigger a motion alarm Highlighting the box under the Min Mra Blocks heading and pressing the 4 button allows you to adjust the minimum number of detection blocks for Daytime and Nighttime independently Smaller numbers provide greater sensitivity because fewer detection blocks must be activated Turning Zone View On will allow you to observe how the DVR is reacting to motion When in the motion viewing mode the detection zone of video will be displayed Any detected motion within the zone will be displayed in red Highlight the box under the Actions and press the button The DVR can be set to react to motion differently for each camera Each camera can be associated with another camera trigger an Alarm Out connector sound the DVR s internal buzzer notify a number of different devices and or move PTZ cameras to preset positions You can control excessive event logging and remote notification of motions detected after the motion dwell time by adjusting the motion ignoring dwell intervals Highlight the box beside Motion Ignoring Interval and press the button A list of intervals ranging from 1 to 10 seconds or Never appears The DVR will not log and notify motion events occurred during the preset interval range NOTE The record action for motion events will not be af
86. ge o wN o o D D D D D D D D D 0 0 000 0D 0 oo oo oo Fan Error Cancel Figure 12 System System Event setup screen The DVR can be configured to run self diagnostics and report the results Highlight the Settings box beside the desired event System Check Recording Check Alarm In Disk Almost Full Disk Bad or Disk Temperature and press the button Highlight the Settings box beside System and press the button You can select the interval that you want the DVR to run self diagnostics on the system You can select from 1 hr to 30 days or Never Highlight the Settings box beside Check Recording and press the button The Check Recording screen appears Arcane Highlighting Schedule On and pressing the 4 button toggles On Schedule On and Off When set to On you can select the day time range and interval that you want the DVR to run self diagnostics on the recorder The Interval can be selectable from 1 min to 7 days or Never Highlight the and press the button to add a schedule item The XK box allows you to delete a check recording schedule o Highlight the Settings box beside Check Alarm In and press the button You can select the interval that you want the DVR to run self diagnostics on Alarm Inputs You can select from 1 hr to 30 days or Never Highlight the Settings box beside Disk Almost Full and press the button S
87. gh menus and items by pressing the arrow buttons CAM E WT m aa Col z H iw Sa A Login Logout T A Wy E fu E eg A KE Display moy Eno a Previous Group Next Group Freeze Alarm Panic Sequence 9 Camera Menu 09 Search 1 Setup 42 Status Figure 41 Live Monitoring menu NOTE The Live Monitoring menu also can be displayed by moving the mouse pointer on the right edge of the screen 57 User s Manual Live Monitoring Menu Login Logout Selecting E Login in the Live Monitoring menu accesses the Login screen and you will be asked to select a User and enter the password to log into the system Selecting 8 Logout in the Live Monitoring menu displays the Logout screen asking you to confirm whether or not you want to log out the current user Display e Full Screen Selecting E Display Full Screen and choosing the camera number button displays the selected camera full screen It 1s the same as pressing the individual camera buttons on the front panel or clicking the left mouse button on a camera image when in one of the multiview formats 1 e 2x2 1 5 1 7 3x3 or 4x4 Clicking the left mouse button on the screen again returns to the previous display mode e PIP 2x2 1 5 1 7 3x3 4x4 Selecting EJ Display gt IS ES E3 EE EE or EE PIP 2x2 1 5 1 7 3x3 or 4x4 displays the cameras in the selected multiview screen mode PIP 2x2 1 5 1 7 3x3 or 4x4 Selecting each
88. gth of the maximum storage time for time lapse recording from 1 to 99 days The Limit Time Lapse Recording feature will function when the storage device has enough space to record video data longer than the preset period When this feature is On the DVR records over the oldest time lapse video once all available storage has been used in the Recycle mode so more event video can be saved Selecting Never will disable the Limit Time Lapse Recording function NOTE When the storage device does not have enough space to record video data longer than the preset Limit Time Lapse Recording period the DVR records over the oldest video data time lapse or event video as it would in the Recycle mode even if this feature is turned On The maximum storage time is only an estimate because the amount of space required to store video varies depending on many factors such as motion and image complexity Highlighting Use Panic Recording and pressing the button toggles between On and Off Highlight the Panic Recording Duration box and set the duration of panic recording Panic recording will stop automatically after the preset duration as long as the PANICI button is not pressed to stop the panic recording You can set the dwell from 5 minutes to 1 hour Select No Limit if you want to stop panic recording manually Highlighting the Panic Recording ips and pressing the button allows you to set the images per second for Panic recording You can se
89. he pause mode pressing the gt button moves to the next image and pressing the button moves to the previous image Play Pause Button In the live monitoring mode pressing the button freezes the current screen and the screen displays icon When in the playback mode pressing the button plays back images at regular speed or pauses playing video Pressing the button selects a highlighted item or completes an entry that you have made during system setup The LED around the button is lit when the unit is On MENU Button In the Live Monitoring mode and Search mode pressing the MENU button displays the menu icons on the right edge of the screen Pressing the button again hides the menu icons During menu setup pressing the button closes the current menu or setup dialog box Pressing and holding the MENU button for three seconds or longer enters the cameo mode and allows you to change the screen layout Refer to the following Live Monitoring Active Cameo Mode section for details PTZ Zoom Button Pressing the PTZ Z0OM button zooms in the current image in double on the screen You can use the arrow buttons to move the rectangle to another area Pressing the Play Pause button zooms in the image in rectangle Pressing and holding the button for three seconds or longer enters the PTZ Pan Tilt Zoom mode and the PTZ icon flickers Pressing the button again exits the PTZ mode Pressing the arrow buttons or MENU bu
90. i 1 95 1 s 1 95 total 16 85 Thank you In the above text in data you can find that the comparison value is located at 17th Unit price mark will be ignored automatically 28 Qty and 40 amount characters including spaces from the left In this case you can enter 17 28 and 40 in each Column box For example if you want to search for Coke with a Qty Quantity of more than and Hotdog with an amount totaling over 8 the following search condition can be set 11 User s Manual Text In Search Option From To Channels First Last Generic Text v Name Value Column Coke 1 28 7 X Hotdog 8 40 Search Example Il 3 4 5 Search 6 123456789012345678901234567890123456789012345678901234567890 Thank you In the above text in data you can find that the comparison value is located at 17th Unit price mark will be ignored automatically 28 Qty and 40 amount characters including spaces from the left but the value of amount category is located on a different line from Item In this case you can enter 17 28 and 40 in each Column box Qty 2 20 1 s 2 20 1 s 3 50 3 s 1 95 1 s total and enter 1 in the Line box for the next line For example if you want to s
91. import the selected settings and change the DVR settings accordingly Highlight Include Network Setup and press the button to toggle between On and Off When set to Off the network settings will not be changed Setup Import Select a setup file File name my registry dat include Network Setup Cancel To export the current DVR settings connect the USB device to the DVR If you enabled the NetFS function Network menu gt NetFS tab you can upload the setup file on the registered NetFS site Highlight Setup Export and press the button Select USB Storage or NetFS If you select NetFS select a NetFS site from the registered NetES site list Highlight the box beside File name and press the button A virtual keyboard allows you to enter the file name Selecting Export will save the current settings in dat file format on the USB device or the NetFS site Setup Export File name DOA E mers z Export Cancel NOTE Even after changing the DVR settings by importing saved settings the time related settings Date Time Time Zone and Daylight Saving Time will NOT be changed CAUTION The USB device must be FAT16 or FAT32 format 14 Digital Video Recorder Highlight Show System Log and press the button to display the System Log System Log Time Type 2013 06 10 22 49 15 Setup Begin 2013 06 10 22 49 10 2013 06 10 22 49 06 Login admin 2013 06 10 22 49 03
92. ing Exit Group Edit in the cameo menu displayed when pressing the button also exits the Active Cameo mode The active cameo mode will remains in effect for 15 seconds 1f there is no further operation In active cameo mode press the button for the camera you want to display in the active cameo After setting the camera number to active cameo the DVR moves the active cameo to the next cameo When the camera number exists on the current screen the active cameo is changed with the existing camera number When the camera number does not exist on the current screen the active cameo is replaced by the camera number You can change the screen layout in this way Zoom Mode You can enlarge an area of the video by pressing the button on the front panel For a few seconds after pressing the button a rectangle displays on the screen A rectangle shows the area that will be enlarged You can move the rectangle around using the arrow buttons Pressing the Play Pause button in the Zoom mode enlarges the area in rectangle Exit the Zoom mode by pressing the button While in the Zoom mode the icon amp displays if Zoom is selected in the Display setup screen OSD tab PTZ Mode Ifa user who has PTZ Control authority logs into the system the user can control PTZ cameras The DVR will control cameras with Pan Tilt and Zoom capabilities Press and hold the button on the front panel for three seconds or longer to display the PTZ camera menu and enter the PT
93. ing OSD Margin and pressing the button displays how OSD text will 0 be displayed on the monitor You can adjust the horizontal and vertical margins so that text and icons will not be hidden beyond the edges of the monitor Cancel OSD Margin Horizontal Vertical Main Monitor DISPLAY Sequence Mode Full Sequence Interval 3 sec _JEvent Monitoring On Resolution 1280 X 1024 it To Screen Cancel Figure 40 Display Main Monitor setup screen Highlight the box beside Mode and press the button You can select between Full Sequence and Cameo Sequence Pressing the SEQUENCE button causes the DVR to sequence cameras and the DVR can sequence cameras in two modes Full and Cameo In the Full mode the DVR sequences through the cameras and displays them full screen In the Cameo mode the bottom right window in a multi screen format sequences through the cameras NOTE Any cameras that are Off have lost video or are set to Covert unless the user has authority to view covert cameras will be excluded from the Cameo sequence You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts pages so that all the cameras will be displayed You can also set up the DVR to display one camera or a group of cameras all the time while cycling through the remaining camer
94. ing a USB hard disk drive under Windows XP Window Vista and Window 7 is almost identical to Windows 2000 Connect the USB hard disk drive to your computer using the USB Cable Turn on your computer The USB device icon should display on the Taskbar If the USB hard disk drive is partitioned or has data it will show up in My Computer as a hard disk drive icon Check the file system by right clicking on the icon and checking under Properties gt General gt File System Ifthe file system is NOT FAT32 format format the USB hard disk drive using the FAT32 format 5 Ifthe USB hard disk drive is not partitioned go to Administrative Tools in Control Panel and launch Computer Management Open Disk Management in Storage and right click an unallocated region of the USB hard disk drive Then click Create Partition 6 Inthe Create Partition wizard click Next then Primary Partition and follow the instructions on the screen Make sure that the FAT32 1s selected for the file system ie ie NOTE The partition size should be less than 32GB because of Microsoft limitations After formatting is complete the USB hard disk drive will be added to My Computer 7 Connect the USB hard disk drive to the DVR Text In Search Examples Search Example 1 2 3 4 5 6 123456789012345678901234567890123456789012345678901234567890 Item Unit price Qty amount Coke 2 20 1 s 2 20 Fanta 2 20 1 s 2 20 Hotdog I 3 50 3 s 10 50 Peps
95. ing the System ID If the system ID is 1 to 16 you must to press the ID button and then press the number button 1 to 16 10 amp 6 in order to control that DVR Ifthe System ID of two or more DVRs is set to 0 those DVRs will react to the infrared remote control at the same time Camera Buttons Pressing the individual camera buttons will cause the selected camera to display full screen Buttons 1 to 9 are also used to enter passwords Sequence Button When in the Live Monitoring mode pressing the button displays live channels sequentially Freeze Button Pressing the button freezes the current live screen Arrow Buttons These buttons are used to navigate through menus and GUI You can also use them to change numbers by highlighting a number in the menu and using the Up and Down arrow buttons to increase or decrease the number s value These buttons are also used to control Pan and Tilt when in the PTZ mode When in the PIP display format pressing the Up and Down arrow buttons moves the position of the small screen counter clockwise and clockwise Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode Menu Button In the Live Monitoring mode and Search mode pressing the IMENU button displays the menu icons on the right edge of the screen Pressing the button also hides the menu icons During menu setup pressing the button closes the current menu or setup dialog box Playb
96. inistrator Highlight the box beside RTP Start Port and press the button Set the start port number of the RTP server obtained from your system administrator Highlight the box beside RTP End Port and press the button Set the end port number of the RTP server obtained from your system administrator Highlight Use Mobile and press the button to toggle between On and Off When set to on you can access a remote DVR using a Blackberry or other mobile devices NOTE Selecting Use Mobile sets the WebGuard service to be enabled automatically regardless of your WebGuard settings When using NAT Network Address Translation or firewall services opening all UDP ports allows you to access a DVR using Blackberry and Android devices You can access a remote DVR and monitor live video images using media players such as VLC Player supporting RTSP service Start the media player on your local PC and enter rtsp ID Password IP address RTSP port number trackID channel number or start Internet Explorer on your Blackberry or other mobile devices and enter http IP address Webguard port number Some media players might play video properly depending on network conditions RTSP service might not be supported depending on the type of media player 45 User s Manual WebGuard NETWORK General RTSP Use WebGuard Service Cancel Figure 31 Network WebGuard setup s
97. isplays Network Setup Wizard You have now completed your network setup Click Finish to complete the setup wizard Select the Finish button to finish the Setup Wizard Highlight System Shutdown and press the button The Shutdown screen displays asking you to confirm whether or not you want to shut the system down After selecting Shutdown and pressing the button a screen will appear telling you when it 1s safe to disconnect power Are you sure you want to shut down Shutdown Date Time SYSTEM Date 2013 06 10 E Format E Time 22 57 28 Format Time Zone GMT 05 00 Eastern Time US amp Canada v MUse Daylight Saving Time Time Sync Holiday Cancel Figure 9 System Date Time setup screen 21 User s Manual Highlight the first box beside Date and press the 4 button The individual sections of the date will highlight Use the Up and Down arrow buttons to change the number Use the Left and Right arrow buttons to move between month date and year Once you have the correct date press the button Highlight the Format box beside Date and press the button Select from the three available date formats and press the button to save your selected format Highlight the first box beside Time and press the button The individual sections of the time will highlight Use the Up and Down arrow buttons to change the nu
98. l Highlight the Mail and press the button to add a mail Recipient 50 Digital Video Recorder Highlight Use and press the button to toggle between On and Off Assign the Recipient to a Group and enter the Recipient s Display Name Recipient Use Group default group Display Name Highlight the box beside Address and enter the Da A recipient s e mail address and mail server provider Highlighting allows you to select the mail server provider from a list of registered SMTP mail server providers Highlight the box under the Attach Type heading and press the button to change the image file format attached to an email NOTE Attaching a image file to an email will not be available for the Text In event Highlight SMTP Setup and press the 4 button The SMTP Setup screen appears Highlight the box beside SMTP Server and press the button A virtual keyboard appears that you can use to enter the IP address E j or domain name of the SMTP server Highlighting allows E you to select your SMTP server from a list of registered SMTP SMTP Setup SMTP Server Port Authentication lt None gt _ Servers Sender J Test NOTE You will need to get the IP Address or domain name of the SMTP Server from your network administrator Cancel NOTE You can use the domain name instead of IP add
99. lect from 1 00 to 30 00 ips 25 00 ips PAL Highlighting the Panic Recording Quality and pressing the button allows you to set the recorded image quality for Panic recording You can select from Very High High Standard and Basic Highlighting the Panic Recording Resolution and pressing the button allows you to set the recorded image resolution for Panic recording You can select from Very High D1 High Half D1 and Standard CIF Schedule RECORD RECORD 1 i 00 00 24 00 J 3 1 All 00 00 24 00 2 Camera 1 16 A xi Default Default lt Simple Mode gt lt Advanced Mode gt Figure 14 Record Schedule setup screen You can program the DVR to record only during certain times based on time day of the week and holidays The smallest time segment you can use is 15 minutes Highlighting Schedule On and pressing the button toggles between On and Off In the Schedule On mode the DVR records video based on the schedule established in the Schedule screen When turning Schedule recording Off you will be asked to confirm your decision and displays at the top left corner of each camera screen Panic rec
100. ling the DVR remotely using a keyboard shortcut keys perform the following functions as described below o ey Function O teat Gots Pressing the lt or h key moves to the left in the menu It is the same as pressing the Left arrow button on the front panel 3 or T Pressing the gt or i key moves to the right in the menu Itis the same as pressing the Right arrow buttons on the front panel Pressing the or k key moves up in the menu Itis the same as pressing the Up arrow POR button on the front panel J or Pressing the J or j key moves down in the menu It is the same as pressing the Down arrow button on the front panel Pressing the m or 20 key displays the Live Monitoring menu or Search menu on the screen It is the same as pressing the button on the front panel Pressing the Enter or Return key selects the highlighted item or completes an entry that Enter or Return you have made during system setup It is the same as pressing the Play Pause button on the front panel m or 28 Windows d or PageUp or Pressing the d or PageUp or PageDown key toggles between different display formats PageDown It is the same as pressing the button on the front panel For Home Pressing the c or Home key allows you to copy video clips It is the same as pressing and holding the butto
101. ll mail accounts being turned On and Off The column is used to collapse and expand recipient groups If there is a or in this column it indicates the item is a Group Name If there is a in front of the Group Name it indicates that the group has been expanded and all of the Recipient Names within that group are displayed below the Group Name If there is a in front of the Group Name it indicates that the group has been collapsed and all of the Recipient Names within that group are hidden To collapse or expand a group highlight the column in front of the desired group and press the button The 4 column can be used to delete a Recipient Name or an entire Group If the MK is grayed out that Group or Recipient cannot be deleted Highlight the M and press the button You will be asked to confirm that you want to delete the Recipient or Group Highlight the Group and press the button to add a recipient Group and select the image file format attached to an email Highlight the box beside Group and press the button A virtual keyboard appears allowing you to enter the Group name New Group mail group_1 Group oOo E Highlight the box beside Attach Type and press the 4 button You oe rl can select between CBF and JPG When selecting CBF the DVR will attach an event detected video clip to an email When selecting JPG the DVR will attach the event detected image file JPEG format to an emai
102. mber Use the Left and Right arrow buttons to move between hour minutes and seconds Once you have the correct time press the button Highlight the Format box beside Time and press the button Select from the three available time formats and press the button to save your selected format NOTE The clock will not start running until you have highlighted Save and pressed the button Highlight the box beside Time Zone and press the button Select your time zone from the list and press the button NOTE The Time Zone can also be selected on the map below by pressing the Left and Right buttons or scrolling the mouse wheel up and down Highlight Use Daylight Saving Time and press the button Pressing the button toggles between On and Off Highlighting Time Sync and pressing the button displays the Time Sync screen You can set up time synchronization between the DVR and standard time servers that are available in most time zones and countries or between the DVR and another DVR Time Sync MAutomatic Sync Time Server Interval Last Sync Time un as Server Cancel Highlight the box beside Automatic Sync and press the button This toggles between On and Off Highlight the box beside Time Server and press the button A virtual keyboard appears that you can use to enter the IP address or domain name of the time server Highlighting
103. mes your DVR has been installed and configured If it has not please refer to Chapters 2 and 3 The DVR s controls are similar toa VCR As with a VCR the main functions are recording and playing back video However you have much greater control over recording and playing back video You can establish recording schedules based on time of day and day of the week The DVR allows you to search through the recorded video using much more sophisticated tools than those available with VCRs Additional DVR features that are not available with VCRs are remote control and viewing and recording video at the same time you are watching previously recorded video The front panel controls are described in Chapter 3 Configuration Turning on the Power Once you have installed the DVR following the instructions in Chapter 2 Installation it is ready to record Live Monitoring As soon as the DVR completes its initialization process it will begin showing live video on the attached monitor and playing live audio through the attached speaker The default mode is to display all cameras at once Pressing any camera button will cause that camera to display full screen It displays live video and plays live audio until the user enters another mode While in the live monitoring mode pressing the IMENU button displays the following Live Monitoring menu on the right edge of the screen Pressing the MENUJ button again hides the menu You can navigate throu
104. n be set to react to text input from devices such as ATMs Automated Teller Machines and POS Point of Sale 1 e cash registers This screen allows you to configure the DVR for each text in device Highlight the box under the Setup heading and press the button Selecting the Setup heading changes all the parameters excluding Port settings of all the text input channels NOTE The system performance might be affected when a large quantity of text inputs are detected from several channels at the same time Text In 1 Text In Product Generic Text e Transaction Start JAny Character Transaction End _ O more line s me Line Delimiter Ignore String _JCase Sensitive Time Out 10 min 00 sec H Cancel Highlight the box beside Port and press the button Select from None RS232 RS485 USB Serial 1 8 and LAN 1 16 NOTE If you have set the Port as None you will not be able to make any changes to the screen When using the USB to serial text in device do NOT remove the USB cable from the port while the system is running Text in data might be lost when the text in buffer is filled by simultaneous text in transactions from all 16 LAN channels Highlight Setup and press the button Use the ATM or POS manufacturer s recommended settings when configuring the RS232 RS485 USB Serial or LAN ports Highlight the box beside Text In Produc
105. n on the front panel for three seconds or longer while the Search mode Pressing the F5 key refreshes the current VNC screen Notification Setup Callback NOTIFICATION Schedule IP Address Cancel Figure 34 Notification Callback setup screen The DVR can be set up to contact a computer running RAS Remote Administration System when an event occurs Highlight the box under the No heading and press the Y button to toggle between On and Off You will only be able to change the IP addresses if No is enabled 49 User s Manual Highlight the IP Address box that you want to change and press the button Use the arrow buttons to enter the IP address of the computer you want contacted during an event You can enter up to five IP addresses Highlight the box beside Retry and enter the number of times you would like the DVR to try contacting the computer Y ou can select from 1 to 10 retries Mail NOTIFICATION Schedule Attach Type SMTP Setup Cancel Figure 35 Notification Mail setup screen The DVR can be set up to send an email when an event occurs The Mail Group and Recipient can be turned On or Off by highlighting the boxes beside the individual mail group and recipient accounts and pressing the button Highlighting the box beside Group amp Recipient and pressing the button will toggle between a
106. n toggles the playback speed from 44 444 and 4444 Pressing the PP button plays video forward at high speed Pressing the button again toggles the playback speed from gt gt PPP and PPP When in the pause mode pressing the gt button moves to the next image and pressing the ll button moves to the previous image Play Pause Button Pressing the button plays back images at regular speed or pauses playing video Cameo Button Pressing and holding the MENU button for three seconds or longer enters the cameo mode and allows you to change the screen layout 64 Digital Video Recorder Search Button Pressing the SEARCH button enters the search mode and pressing the button again exits the search mode When entering the search mode video is paused Pressing the Play Pause button plays back video at regular speed The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back video Zoom Button Pressing the ZOOM button zooms in the current image on the screen Display Button Pressing the button toggles different display formats The available formats are 2x2 1 5 1 7 3x3 and 4x4 Group Button Pressing the GROUP button changes the screen from the current camera group to the next camera group and the screen displays page number You can use a mouse for convenient playback control Position the mouse pointer on the playback screen and the following Record Table Search
107. nd press the button to test emailing with the current settings you made 51 User s Manual SNS NOTIFICATION Callback Schedule Cancel Figure 36 Notification SNS setup screen The DVR can be set up to post a message via SNS Social Network Service when an event occurs You can add and edit the SNS account on this screen The SNS account can be turned On or Off by highlighting the boxes under the No heading and pressing the button To add an SNS account highlight the and press the 4 button Highlight Type Twitter the box beside Type and press the button Selecting Twitter from the User Name Type allows you to post a tweet on Twitter when an event occurs Password Mm Highlight the box beside User Name Password and press the 4 button A virtual keyboard appears allowing you to enter the user name and password Confirm P The SNS accounts can be deleted by highlighting the ME beside the account and pressing the button NOTE Posting a tweet might fail because of Twitter limitations FTP NOTIFICATION Callback Upload File Cancel Figure 37 Notification FTP setup screen 52 Digital Video Recorder The DVR can be set up to upload event detected image or video clip on an FTP site when an event occurs The FTP box displays the FTP site information The Upload File box displa
108. ng hard disk drive S M A R T protocol Technical Overview In addition to replacing both a time lapse VCR and a multiplexer in a security installation your DVR has many features that make it much more powerful and easier to use than even the most advanced VCR The DVR converts analog NTSC or PAL video to digital images and records them on a hard disk drive Using a hard disk drive allows you to access recorded video almost instantaneously there is no need to rewind tape The technology also allows you to view recorded video while the DVR continues recording video Digitally recorded video has several advantages over analog video recorded on tape There is no need to adjust tracking You can freeze frames fast forward fast reverse slow forward and slow reverse without image streaking or tearing Digital video can be indexed by time or events and you can instantly view video after selecting the time or event Your DVR can be set up for event or time lapse recording You can define times to record and the schedule can change for different days of the week and user defined holidays The DVR can be set up to alert you when the hard disk drive is full or it can be set to record over the oldest video once the disk is full Your DVR uses a proprietary encryption scheme making it nearly impossible to alter video You can view video and control your DVR remotely by connecting via Ethernet There are two USB ports that can be used to upgrade the
109. of the registered bookmark Use the virtual keyboard to enter the bookmark name The column can be used to delete a Bookmark NOTE Up to 64 bookmarks can be registered Use the arrow buttons to highlight the bookmark point for which you would like to see video The selected bookmark will display on the screen by pressing the 4 button Clip Copy Video clips can be copied on an external USB hard disk or flash drive The copied video clips can be viewed on computers running Microsoft Windows 2000 XP Vista or 7 Refer to the Appendix USB Hard Disk Drive Preparation for information on preparing the external drive for clip copy Selecting A B Clip Copy in the Search Export menu or pressing the button on the remote control during playback will set the starting point of the video to be clip copied and the icon displays at the bottom left corner of the screen Selecting A B Clip Copy in the Search Export menu or pressing the button again will set the ending point of the video to be clip copied by displaying the Clip Copy screen Pressing and holding the button on the remote control for more than three seconds while in the Search mode or Live Monitoring mode initiates the One Touch Clip Copy function The last recorded image will be the ending point of video to be clip copied and the system will automatically begin to calculate the possible video data size that the selected storage media can handle Select Clip Copy in the Search
110. onitoring menu resets the DVR s outputs including the internal buzzer during an alarm Panic Selecting m Panic in the Live Monitoring menu starts panic recording of all cameras and selecting E again stops panic recording Itis the same as pressing the PANIC button Sequence Selecting Lu Sequence in the Live Monitoring menu causes the cameras to display sequentially It is the same as pressing and holding the button for three seconds or longer When in one of the multi view formats selecting E will cause the DVR to go through predefined screen layouts Full Sequence Or the bottom right screen will display live cameras sequentially Cameo Sequence For example if you select D4 in the 2x2 format the DVR changes pages as follows 58 Digital Video Recorder 12 _ 516 ebo rafia 1121 314 7 8 asie 3 4 lt Full Sequence gt ap o AUR s Hal ao A a A 1012 3 4 316 EIR lt Cameo Sequence gt Selecting O again in the Live Monitoring menu exits the Sequence mode While in the Sequence mode the 7 icon displays in bottom left corner if Sequence is selected in the Display setup screen OSD tab If all the cameras in a page are Off or have lost video or are set to Covert unless the user has authority to view covert cameras that page will be excluded from the sequence NOTE The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence monitoring should be selected in
111. onnect a PostScript printer or external hard disk drive or flash drive to one of the USB ports If you enabled the NetFS function Network menu gt NetFS tab you can upload the images on the registered NetFS site Highlight the box beside Printer Model and press the button Selecting PostScript Printer will print images on a PostScript printer connected to the DVR Selecting File Printer will save the current image as a PDF file on se diet LA gt an external USB hard disk drive or flash drive or a NetFS site Printer Model PostScript Printer v NOTE Images saved as PDF files can be printed on any printer connected to your PC Highlight the box beside Paper Size and press the button You can select the paper size Figure 54 Print screen Once you have selected the printer model and paper size highlight the Print button and press the button Select USB Storage or NetFS If you select NetFS select a NetFS site from the registered NetFS site list A message appears asking you if you want to print the current image Highlight the Continue button and press the button to print NOTE If your printer only supports an LPT connection parallel use an LPT to USB converter cable The printer cable is not provided 76 Digital Video Recorder Appendix USB Hard Disk Drive Preparation NOTE The following description is for preparing a USB hard disk drive under Windows 2000 Prepar
112. ording will function even when Schedule is turned off Y displays during panic recording Highlight the Schedule Mode box and press the button You can select between Simple Mode and Advanced Mode Selecting Advanced Mode allows you to set up individual recording schedule for each event NOTE Changing the schedule mode will reset all event and action statuses Highlight the and press the button to add a schedule item 28 Digital Video Recorder Highlight the box under the Day heading and press the button to change the days that the scheduled recording will take place Choose from Sun Mon Tue Wed Thu Fri Sat M F Hol and All Highlight the box under the Range heading and press the button to change the time range that the scheduled recording will take place The smallest time segment you can use is 15 minutes Highlight the box under the Mode heading and press the button to change the recording mode that will be used Choose from No Record Time Event and Time amp Event Simple Mode Only When the DVR is in the No Record mode it will not record during the preset day and time range as long as the PANIC button is not pressed Use the No Record mode when you do NOT want the DVR to record during certain times When the DVR is in the Time mode the icon displays at the top left corner of the screen The DVR will record and displays the icon at the top left corner of the screen during the scheduled times
113. panel on a local system or alarm out control button on a PC running RAS Cancel e Covert Camera View The user can view video from cameras set as Covert while in the Live Monitoring or Search mode on a local system or a PC running RAS e Search The user can access the Search mode on a local system or a PC running RAS e Clip Copy The user can copy video clips on a local system or a PC running RAS e Setup The user without Setup authority cannot establish any system settings excluding system shutdown and logout on a local system or a PC running RAS System Time Change The user can change the system date and time on a local system or a PC running RAS Data Clear The user can clear all video data or format disks on a local system or a PC running RAS PTZ Setup The user can establish all PTZ settings on a local system or a PC running RAS Alarm Out Setup The user can establish all Alarm Out settings on a local system or a PC running RAS Covert Camera Setup The user can establish all Covert Camera settings on a local system or a PC running RAS Record Setup The user can establish all Record settings on a local system or a PC running RAS Setup Import The user can import saved DVR settings from a local system or a PC running RAS Setup Export The user can export the current DVR settings to a local system or a PC running RAS VNC Setup The user can establish all VNC settings on a local system
114. play BULON eroticos oasis accio seiflaci n 9 cd A o O II oacectidtedlaccectncace cece Ge dune eee 9 USE AI a o oe 9 Remote GOntrol BUON Sat dodo 9 O asm E EAS aang alent aot Gna EA Santa ESEE 10 Camera BUMOMS lt a bi 10 SUECO BUM io a 10 A A O A TR ne eae 10 Arrow BUON tias 10 A NO 10 Playback BUNONS da aida 10 MR AAA A A A 11 Layout BURTON ta is ca tacon 11 LO DUO A a ia 11 A necaaiatunenancacaneaontquamaaiaaderabaaaenabnsaindaciamenuhineane TE 11 Ener ES A A ema etme 11 A A A EE 11 PIZ COMO ls UO NS POO0 N N0 PP pabenaccanenan seid atac eine atneiatenas sohnaumsiateaanbiataans 11 Back UD DUNO a Bae att 11 Calend a Ne CRO ia a 11 Turning onthe POWER 11 Mal Unt Seip aie e dr 11 User s Manual DCI ee e e o ane 12 A ences race Sa arecake E E a EE 13 Oyo e EAE eaten ee i on oe eee ee ae ee ee er ten eee ee eee eee ee ee eer 13 Belial A e o o seen sacred tee cans 21 A sects eee ve deb toes a E ay dared een og dais oa Roe yoke a gaa E E tens E 23 o A A eee eee eee 25 SVSICMMEVENE EA AE al E do 26 RECOrdng CU AAA eta E a een aeeaind 2 GING Fal ea Py taance E esata aan sanpasuasatesasanasearoesanaaeeeeamaaes 2 A dll E eslemaunton deat tas aalesetaawncls men yadeoseataxasman is 28 Pre EVOA pusrcira A nds 30 Hs A e e E ac oe scmuaana nant aanodancesenaasecsanmeasete 31 MOIO ess n nace edueetruad Wea thee deeiOuwcueautenn aes EE 31 PAULI MA LARA PECES PO POE O TE 32 A ee ee ee en ee eT 33 Mi 1 mer meeneters one
115. plays the first or last recorded image or searches by date and time see the previous Searching Clip Copy Video Go To section of this chapter for more details cee e Clip Copy Clips a video segment and saves it see the following Clip Copy section for more details stowPlay Print Prints the current playback image e Zoom Zooms the current playback image e Slow Play Plays video at low speed x1 2 x1 3 x1 4 x1 6 and x1 8 The individual playback controls at the bottom perform the following functions as described below 41 Go to the previous image gt Play Pause Ik Go to the next image 4 Fast backward play Fast forward play Selecting W located at the bottom displays the Bookmarks screen See the following Bookmarks section for details Selecting ME in the top left corner exits the Record Table Search screen Motion Search Motion Search 2013 05 14 09 05 00 Option Figure 50 Motion Search screen The Motion Search can be selected from the Search menu while the DVR displays the camera full screen The Motion Search screen displays a list of motion events Use the arrow buttons to highlight the event for which you would like to see video and press the Play Pause button to display the video associated with the selected event on the small search screen Highlighting Close and pressing the 4 button will extract the video associated with the Motion event and di
116. r notify a number of different devices and or move PTZ cameras to preset positions 36 Digital Video Recorder Camera Setup General CAMERA General PTZ b Title Use A 720 720 720 720 720 720 J 720 ATTE Figure 22 Camera General setup screen Y ou can turn the camera number On or Off and you can change the Title of each camera using the virtual keyboard You can also determine which cameras will display on the monitors by selecting Normal Covert 1 or Covert 2 from a drop down list in the Use column NOTE When selecting the Covert 1 the DVR displays the camera title and status icons on the covert video When selecting the Covert 2 the DVR displays only camera title on the covert video A user who does not have Covert Camera View authority cannot view video from cameras set to Covert 1 or Covert 2 in both the live monitoring and playback modes You can select the width resolution supported by the camera between 720 and 960 by highlighting the box under the Mode heading and pressing the button NOTE The system restarts automatically after changing the resolution settings When selecting the 960 Mode the total recording speed and playback speed will decrease 37 User s Manual PTZ CAMERA Product Port RS232 y Setup Save Cancel Figure 23 Camera PTZ setup screen NOTE You will only be able to set up PTZ de
117. rch UPnP PortForwarding LAN Setup Select between Auto Configuration and Manual Configuration for network configuration and then select the Test button to test the network configuration you selected NOTE Selecting Auto Configuration allows the DVR to automatically obtain LAN parameters IP address Gateway Subnet Mask and DNS Server address Selecting Manual Configuration allows you to set up LAN parameters manually The network configuration you set should be tested by selecting Test otherwise the Next button will cannot be selected and you cannot move to the next step e Use DSL PPPOE Setup Selecting the box allows you to set up the DSL network Entering the ID and password for DSL connection 1s required Network Setup Wizard Step 3 3 FEN Setup FEN is the technology that automatically sets up your DVR to work seamlessly for remote viewing via your network Internet connection Simply connect the DVR to your network router and you will be networking in no time You need to name your DVR FEN to work Now enter the DVR name you created to access this DVR NO SPACES Cancel 20 Digital Video Recorder FEN Setup e FEN Name Enter the DVR name to be registered on the DVRNS DVR Name Service server NOTE The FEN Name you entered should be checked by selecting Test otherwise the FEN changes will not be saved When entering no name or a name already registered on the DVNRS server an error message d
118. reen ooocccoonccoconncconnnoncncnonnconannnnnnnnnnncnnnnnnnonnnnnnnnnnnnnnnrnnnncnnnnnnnannnonens 35 Figure 22 Camera General Setup Screen cccccccceeeecceeeeecceeeccceseecauseecceeeesseueeesseeessaueeessneensssaes 37 vi User s Manual Figure 23 Figure 24 Figure 25 Figure 26 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35 Figure 36 Figure 37 Figure 38 Figure 39 Figure 40 Figure 41 Figure 42 Figure 43 Figure 44 Figure 45 Figure 46 Figure 47 Figure 48 Figure 49 Figure 50 Figure 51 Figure 52 Figure 53 Figure 54 Camera P TZ Setup Screen dt 38 Devices Audio setup Screen ii a a 39 Device Alarm Out setup SCreen ocococncccccnccccnnccnnnccncnnnnnnnonannnnnrnnnnnnnnnnnnnnnnnnnnnrnnonnnnnnnnnnnnnninos 39 Device Remote Control setup Screen occconccccccnccccnncccnncnnncnnnncnnonnnnnonnnonnnnnnnnnnnnnnnnnnnnnonacinnns 40 Network General setup SCION cccccceececeneecceeeceececeecesseeeeseeeeseeeeseacessaeeesseesseeesaneessaees 41 Network LAN Setup SCrECN encanta E a aa 42 Network FEN Setup Scree Nr agade das 44 Network RTSP setup SCIreen cccccccccceececeececseeeeceeeeceeeeeceucessaeeeseeeeseusessaeessaeeeseeeeseeeeseas 45 Network WebGuard Setup Screen occccocccccccnccccncconnnononnnononnnnncnononnnnonnnnnncnnnnnnnonnnnnnnnnnonnnnnnos 46 Network NGIFS renu a El 47 Network
119. ress if you already set up the DNS Server when setting up the LAN Highlight the box beside Port and press the button Use the arrow buttons to enter the SMTP Server port number obtained from your system administrator The default port number is 25 Highlight Use SSL TLS and press the button to toggle between On and Off When it is On the DVR can send an email via an SMTP server requiring SSL Secure Sockets Layer authentication NOTE This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org Highlight the box beside Authentication and press the button An Authentication screen appears Highlight Use and press the User button to toggle between On and Off Highlight the box beside User Password q Password and press the button A virtual keyboard appears allowing oK you to enter the user ID and password Authentication Highlight the box beside Sender and enter the sender s e mail address Use the virtual keyboard to enter the e mail address Highlight the box beside Display Name and enter the Sender s Display Name Highlight the box beside Sender Display Name pi Te Address and enter the sender s e mail address and mail server provider Highlighting allows you to select the mail server provider from a list of registered mail server providers Highlight the Test box a
120. s e Good The storage condition is normal e Bad Data cannot be written on or read from the storage device e N A Storage conditions are normal however the S M A R T monitoring is not working or supported NOTE When the storage condition is Bad the Event Status Storage screen displays and you can check the storage condition for details Once the Bad message displays replacing the hard disk drive is recommended usually within 24 hours Temperature and S M A R T information will be available only for internal hard disk drives supporting the SMART Self Monitoring Analysis and Reporting Technology monitoring program Recording Video Once you have installed the DVR following the instructions in Chapter 2 Installation it is ready to record The DVR will start recording based on the settings you made in the Record setup screen See Chapter3 Configuration Recycle On or Recycle Off The factory default is Recycle On It does this by recording over the oldest video once the hard disk is full Setting the DVR to Recycle Off causes it to stop recording once the hard disk is full Although you will be able to record without changing the unit from its original factory settings you will want to take advantages of the DVR s many tools See Chapter 3 Configuration for detailed descriptions of the recording mode options Panic Recording Selecting A Panic in the Live Monitoring menu or pressing the PANICI
121. s otherwise the DVR cannot be connected with the PC running RAS or WebGuard CAUTION When changing the port settings you must change the port settings on the PC running RAS as well Refer to the RAS manual for details 42 Digital Video Recorder Highlight Use UPnP and press the button to toggle between On and Off When it is On port forwarding from the NAT Network Address Translation device to the DVR will be enabled automatically via UPnP Universal Plug and Play service This function will be especially useful when accessing a port on a private IP address NOTE For the UPnP service to work the NAT device should support the UPnP Port Forwarding function and the function should be set to enabled You cannot change the port settings when Use UPnP is On Highlight the Status box and press the button to display the port numbers forwarded from the NAT device via UPnP service Highlight the Test box and press the 4 button to test the current LAN settings you made NETWORK NETWORK General General FEN RTSP e ADSL with PPPoE Port Number Setup Port Number Setup se UPnP se UPnP Selecting DHCP from the Type and highlighting Save button reads the current IP address of the DVR configured by DHCP Dynamic Host Configuration Protocol
122. s for video clip copying or system upgrades Position external drives close enough to the DVR so that you can make the cable connections usually less than 6 feet Use the USB cable provided with the hard disk drive to connect it to the DVR A USB mouse not supplied can be connected to one of the ports You can use the mouse to navigate through the screens and menus much like you would on a computer A PostScript USB printer not supplied can be connected to one of the ports You can print selected images resulting from a search Refer to Chapter 4 Operation Searching Video A USB to Serial converter can be connected to the USB port Multiple text in devices can be used with a USB to Serial converter Remote Control Buttons O ID Button 2 Camera Buttons Sequence Button Freeze Button Arrow Buttons Menu Button Playback Buttons Panic Button Layout Button Zoom Button PTZ Button 12 Enter Button 43 Alarm Button PTZ Control Buttons ds Back Up Button Calendar Button 006060 06060 000 Q DVR REMOTE CONTROLLER Figure 4 Infrared remote control User s Manual NOTE For simplicity the button descriptions in this manual refer to the front panel buttons ID Button If a DVR System ID is set to 0 the infrared remote control will control that DVR without any additional operations Refer to the System General setup screen in this chapter for further information on sett
123. save in units of 2GB For example 3 individual 2GB files will be created when saving a 6GB video clip However the file size for the One Touch Clip Copy is limited to 2GB You can use other functions on the DVR while video is being backed up To do this highlight the Close button and press the button You can return to the Clip Copy screen at any time to check the progress Y ou do not need to install any special software on your personal computer to review the video clips Refer to RAS manual for instructions on how to review video clips you have copied NOTE During Clip Copy you cannot shut the system down clear data on the storage device or format the storage device CAUTION Do NOT disconnect the USB cable or the power from the external drive while copying video clips If the external drive is shut down or the USB cable is disconnected while copying video clips THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL DRIVE COULD BE DAMAGED and you will get an error message the next time you try to copy video clips You will need to power down the DVR and restart it to get rid of the error message Once the file system of the USB hard disk drive has been corrupted this error message cannot be dismissed Even after restarting the DVR it may automatically restart while preparing to clip copy You must recover the file system using the recovery program or you must reformat the hard disk drive Print You can print images on a printer C
124. sies Meese ste tte Uta E emt ne Ta er ee reece eee vere 34 A A E ute Caste ec ean ee Mat ieee ie 35 Camera SOU oaths cate antes tn phate tc 37 Generala EPA O 37 A sh cee A P san ssat tan ath canst EET A T T E A ET esse TA 38 Device RD A PS hed ee 39 A e eee eee eer eee te 39 E Geena a a II en ea ee ee eer eno 39 Remote CONTO a a taco cena odios 40 NeEWOK sed tl lotes 41 A esata rat aiet O ease bane 41 A a Meare nigel E E EEE O E 42 RE Nison E O E A 0 44 A A eee 45 Webcard orerar TT T linds 46 Ne to EPR no O 0 0 a T E 46 VNO oresonn eng A dt id as 48 Rojo AA staaiatuai Glen ueticgace ale a a a ie 49 CAMA ie 49 A O O 50 SS A nanan caases od 52 A AEE AE AE EEEN TE mics ec a ase ee tenes seaman beanie NE ATE T E 52 SOCIO A OO 53 DIS DIAY SCD dle E nene bn 54 A A data E N 54 MAR MONO o ea ie 55 SA o A ee ee 57 Torning on ANO PO WE ns la odos did 57 eu en A e ee ee renee Serer ree ee enter nee err es 57 LVS MONROE Men Ulises idas 58 PACING Cameo NOE testa cia dodo E 60 ZOON MOGE a e o a a rl est de 60 PIZ MOGE ooa A A A E A e ree 60 Event MONO IO eseria E td nau E A E E 61 COVEN Camera crna A a oo 62 SAS Monto Ade tai E 62 RECOrdING MALO e a OO 63 Panie Recording ias 63 Digital Video Recorder RECON pe 218 o POP CR nee eo A ee ei en tee ene ree eee ene ee ene er ne en eee 64 Playing Recorded VICO cuido Adee eee 64 Y O a 65 A act oes a el matia cans Seas Aan 65 Event Log SS AN CIN sis rascal a 68 Record Ta
125. splay the first image of the event Pressing the button will start playing the event video segment Pressing SEARCH returns to live monitoring You can also narrow your event search by selecting the Option button and setting up the new search condition Motion Search Option First To Last Type Motion Search Zone 192 Block s Sensitivity 3 Min Blocks You can search video from the first to last recorded images or you can set the start and stop times and dates User s Manual Highlight the box beside From and press the button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the first recorded image When highlighting and pressing the button the bookmark list displays and the bookmark point you selected will be the starting date and time Highlight the box beside To and press the button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the last recorded image When highlighting and pressing the button the bookmark list displays and the bookmark point you selected will be the ending date and time Highlight the box beside Type and press the button You can select between Motion Search and Museum Search Motion Search detects motion in the defined area Museum Search detects if a defined object
126. stem Pressing the Play Pause button will extract the event video and display the first image of the event Pressing the E button will start playing the event video segment Pressing SEARCH returns to live monitoring NOTE Itis possible that no recorded image displays on the current screen Press the button and change the screen mode to 4x4 You will be able to easily see the camera have recorded video during target time You can also narrow your event search by selecting the Option button and setting up the new search condition Event Log Search Option From First To Last Alarm In System Event Motion Panic Record Check Recording Check Alarm In Video Blind Al Disk Almost Full Disk Bad Disk Temperature Disk S M A R T Disk Config Change Video Loss Text In Record Channels Fan Error You can search video from the first to last recorded images or you can set the start and stop times and dates Highlight the box beside From and press the button to toggle between On and Off When set to Off you can enter a specific Date and Time When set to On the search will be from the first recorded image When highlighting and pressing the button the bookmark list displays and the bookmark point you selected will be the starting date and time 68 Digital Video R
127. stem Log Export File name i Cancel NOTE When opening the saved txt file setting to the proper character encoding and using fixed width fonts will be required to read the file properly The box beside Recorded Data From To displays the time information of recorded data Highlighting Clear All Data and pressing the button will clear all video data You will be asked to verify that you wish to clear all data before the DVR erases the video data Clear All Data will not clear the System Log 15 User s Manual Highlight Wizard and press the button The Wizard setup screen appears The Wizard setup guides you through configuring the system for basic operation Select wizard Setup wizard Setup wizard will help you to setup your DVR Please select one of the options below Quick wizard DVR setup wizard O Network wizard Network setup wizard Cancel Select either Quick wizard or Network wizard and select the Next button to start the selected setup wizard NOTE Selecting the Cancel button throughout the screens exits the Quick Setup Wizard without saving your changes and returns to the main setup screen Quick Setup Wizard You are about to start the Quick Setup Wizard This Wizard will guide you through Date Time Setup Recording Method Setup Recording Video Quality Setup Network Setup Optional Click the Next button to start the wizard 16
128. system or copy video clips to external hard disk and flash drives User s Manual HDMI Monitor VGA Monitor Sensors 1 16 Cameras 1 16 5 wW oy AO Audio Input 1 4 ON USBHDD Flash Drive i LIS ro gt ee 68 SS ee KA or Flashing Light Alarm a Siren Audio Output 9 Digital Video Recorder J RAS O WebGuard IR Remote Control ATM POS Remote Keyboard Mouse Network Figure 1 Typical DVR installation Digital Video Recorder Chapter 2 Installation Package Contents The package contains the following Digital Video Recorder Power Adaptor and Power Cord User s Manual This Document RAS Software CD and User s Manual Infrared Remote Control Required Installation Tools No special tools are required to install the DVR Refer to the installation manuals for the other items that make up part of your system 0 000 Figure 2 DVR rear panel Video Input Audio In Out Alarm Input Output Factory Reset Switch Video Out Network Port RS232 Port RS485 Port Power Cord Connector Your DVR can be used with either NTSC or PAL equipment NOTE You cannot mix NTSC and PAL equipment For example you cannot use a PAL camera and an NTSC monitor Video Input O O 0000 30800008 Connect the coaxial cables from the video sources to the BNC Video In connectors O User s Manual
129. t and press the button Select your device from the list 35 User s Manual NOTE The following description is for a Generic Text Device The screen changes for different types of text input devices and there will be different parameter boxes for you to enter information Highlight the box beside Transaction Start and press the button Use the virtual keyboard to enter the Transaction Start string Refer to the device manufacturer s documentation for the text string that the device first sends when a transaction starts If you want the DVR to react to any character sent from the text input device you will want to turn On Any Character Highlight Any Character and press the button to toggle between On and Off NOTE If Any Character is turned On you will not be able to enter any text in the Transaction Start box Highlight the box beside Transaction End and press the button Use the virtual keyboard to enter the Transaction End string Refer to the device manufacturer s documentation for the text string that the device sends when a transaction ends Highlight the more line s box and press the button Select the number of additional lines of text that you want the DVR to record You can choose from 0 to 10 Highlight the box beside Line Delimiter and press the button Use the virtual keyboard to enter the character s that the device uses to indicate the end of a line Special characters can be created using
130. t Panel Controls Figure 3 DVR front panel Camera Buttons 2 HDD LED Alarm LED Arrow Buttons Play Pause Button Menu Button PTZ Zoom Button Group Sequence Button Search Button Display Button Panic Button 42 USB Port The front panel looks and operates much like a VCR combined with a multiplexer Many of the buttons have multiple functions The buttons on the infrared remote control while laid out differently perform the same functions as those on the front panel The following describes each button and control Take a few minutes to review the descriptions You will use these to initially set up your DVR and for daily operations NOTE A separate Alarm button on the front panel is not provided Pressing any button on the front panel resets alarm output including the internal buzzer when the alarm is activated However when you are in the menu or PTZ mode you have to exit the menu or PTZ mode first to reset alarm output The infrared sensor on the DVR is just to the right of the arrow buttons Make certain that nothing blocks the sensor or the remote control will not function properly When you use wireless communication devices such as Wi Fi or Bluetooth near the DVR the remote control might not function properly You can also use a USB mouse not supplied to navigate through the screens and menus much like you would on a computer Camera Buttons Pressing the individual camera buttons will cause the s
131. t screen to 1ts default settings Highlighting This page or All pages and pressing the button resets the current page or all pages of the screen to its or their default settings Do you want to load default setup After you are finished with any setup screen you can highlight Save and press the button to save the changes and exit the screen If you do not wish to save the changes highlight Cancel and press the button to exit the screen Press the MENU button or move the mouse pointer on the right edge of the screen and then select EJ Login in the Live Monitoring menu to enter the setup screens The Login screen appears Select a User and enter the password by pressing the appropriate User admin combination of Camera number buttons and then the button There Password eO is no default password when logging in the admin user for the first ok canca time Ifyou do not know the password click the button for guidance Figure 5 Login screen NOTE To assure the secure management of the system setting up a password is strongly recommended If you cannot use the front panel buttons click the button using the mouse to enter a password and the virtual keyboard displays See instructions below for using the virtual keyboard To log the user out of the system press the MENU button or move the mouse pointer on the right edge of the screen and then select F Logout in the Live Monitoring menu Th
132. t up on the remote site Leaving the Camera Title blank causes the camera name set up on the remote site to display The fi icon will display on each camera screen when audio communication is available between the WebGuard system and a DVR Web Search Mode WebSearch is a remote web search program that allows you to search recorded video on the remote DVR NOTE The remote site connection in the Web Search mode will automatically be disconnected if there is no activity for 30 minutes 7 Web Search Windows Internet Explorer le http 10 0 12 26 12088 search htm QA D Click the KA to log out the WebGuard program 2 Click the A to access to the web monitoring mode 3 Position the mouse pointer on the WebSearch logo to see the version of the WebGuard program User s Manual 4 The DVR information window displays the time information of recorded data on the remote DVR and login information of WebGuard Click the M to blur sharpen equalize and interpolate playback images Click the _ to zoom amp Blur out or zoom in the recorded image Click the to adjust the brightness of the recorded images Seen Equalize NOTE Image processing works only in the pause mode Interpolation 6 The playback function buttons include fast backward pause play fast forward go to the first peed image go to the previous image go to the next image and got to the last image 7 Click th
133. tem you select should be enabled MEAN 4 angia in the Notification setup screen and the DVR should be registered in the MLANS lt Range gt RAS Remote Administration System MSNS Summary 1 1 NOTE The Notify action for system events you made in the System Event setup screen on the System menu will not be affected by your Notification Schedule settings Highlight the box beside Summary Email Interval and select the interval that you want the DVR to send a summary email The DVR will send an email containing a summary of events detected during the preset interval Display Setup OSD DISPLAY Status Camera Remote Control _ No Zoom Record MNetwork MPTZ Freeze amp Sequence MText In Screen Group Display Dwell 10 sec Free Space Date Transparency gt User Name OSD Margin Background Panel Figure 39 Display OSD setup screen Highlighting an item and pressing the button toggles that item On and Off When an item is On there is a checkmark in the box beside it The following items can be turned On or Off e Remote Control The icon amp displays when the DVR can be controlled by the infrared remote control e Zoom The icon amp displays on the enlarged video e Network The icon j displays when the unit is connected to a network via Ethernet The icon displays on each camera
134. the button You can select the type of network configuration from Manual DHCP and ADSL with PPPoE Select the desired type and press the button Selecting Manual from the Type allows you to set up LAN parameters manually Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the number The factory default LAN settings are IP Address 192 168 1 129 Gateway 192 168 1 254 Subnet Mask 255 255 255 0 NOTE You will need to get the appropriate IP Address Gateway and Subnet Mask from your network administrator Highlight the box beside DNS Server Press the Up and Down arrow buttons to set the IP address of the DNS server Highlight the Port Number Setup box and press the button The Port Number Setup screen appears NOTE You will need to get the appropriate Port Numbers for each RAS and WebGuard related program Admin Callback Watch and Search from your network administrator Change the numbers by highlighting them and using the Up and Down Port Number Setup 8000 12000 Remote Admin 8200 arrow buttons to increase or decrease the number The factory default Remote Callback 8201 gt Port settings are UGC ane H Remote Admin 8200 di ii da Remote Callback 8201 Remote Watch 8016 Remote Search 10019 NOTE The system restarts automatically after changing the port settings Do NOT use the same port number for two different program
135. tly There are five settings with 1 being the least sensitive and 5 being the most sensitive You can define the area of the image where you want to detect motion e g a doorway Highlight the box under the Zone heading and press the button The Motion Zone screen displays The Motion Zone screen is laid over the video for the selected camera You can set up motion zones by selecting or clearing blocks NOTE You can set up motion zones one block at a time in groups of 16 individual block groups A block group is positioned within the image area using the Up and Down arrow buttons and individual blocks within the block groups are selected or cleared using the camera buttons Press the button to display the menu screen The menu on the setup screen has the following functions 31 User s Manual Select Activates highlighted blocks to detect motion Clear Clear Deactivates highlighted blocks so that they will not detect motion ARTES Reverse Activates inactive highlighted blocks and deactivates active highlighted blocks Select All Select All Activates all blocks to detect motion Clear All Clear All Deactivates all blocks so that they will not detect motion Reverse All Activates inactive blocks and deactivates active blocks Zone View Displays any detected motion within the zone in red OK Accepts changes and closes Zone setup Cancel Exits Zone setup without savin
136. tton allows you to control properly configured cameras Group Sequence Button When in the live mode pressing the GROUP SEQUENCE button changes the screen from the current camera group to the next camera group and the screen displays the page number Pressing and holding the button for three seconds or longer displays live channels sequentially Search Button Pressing the SEARCH button enters the search mode and pressing the button again exits the search mode When entering the search mode video is paused Pressing the Play Pause button plays back video at regular speed The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back video In the Search mode pressing and holding the SEARCH button for three seconds or longer allows you to copy video clips When in one of the multi view formats pressing SEARCH button enters the Triplex mode The DVR supports the Triplex function monitoring recording and playing back at the same time Digital Video Recorder Display Button Pressing the DISPLAY button toggles between different display formats The available formats are PIP 2x2 1 5 1 7 3x3 and 4x4 Panic Button Pressing the PANIC button starts panic recoding of all camera channels and displays Y on the screen Pressing the button again will stop panic recording USB Port Two USB ports on the front panel are provided to connect external hard disk or flash drive
137. ttp DVRNS server address DVR Name ClipPlayer exe The DVRNS server address and the DVR name registered on the DVRNS server When not using the DVRNS http IP address port number ClipPlayer exe The DVR IP address and the WebGuard port number default 12088 set in the Network setup screen WebGuard tab Click the 54 to print the current image on a printer connected to your computer Click the to reload the recording data The Timetable displays recorded data of the selected camera by time in hour segments 800 Selecting a camera on the screen and clicking the right mouse button displays the text menu screen e Change Camera Title Changes the camera name Change Camera Title i f e Enable Audio Plays audio while playing back recorded video that has recorded Enable Audio BER audio Single Screen Layout Only Aspect Ratio e Aspect Ratio Changes the image aspect ratio Anti Aliasing Screen e Anti Aliasing Screen Enhances image display quality by eliminating stair stepping aliasing effects in the enlarged image NOTE Acamera name change in the Web Search mode does not affect the camera name set up on the remote site Leaving the Camera Title blank causes the camera name set up on the remote site to display 82 Digital Video Recorder Time Overlap If the DVR s time and date have been reset to a time that is re re e E A earlier than the existing recorded video it is possible for the
138. tup screen on the Event menu E Check Alarm In and Check Recording will be highlighted when each event is detected based on the settings you made in the System Event setup screen on the System menu Panic Record will be highlighted while the DVR is in the panic recording mode Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and the level of disk usage reaches the Disk Almost Full percentage you made in the System Event setup screen on the System menu Disk Full will be highlighted when the DVR is not in the Recycle mode and all available storage space has been used Disk Config Change will be highlighted when the DVR reboots after the hard disk drive has been replaced Fan Error will be highlighted when the cooling fan to the left of the power cord on the rear panel is not working for more than four seconds 62 Digital Video Recorder Highlighting the Storage tab will display the hard disk drive status Event Status Disk Bad Temperature Internal 1 Good 0 Good 40 C Internal 2 Good 0 Good 39 C Figure 45 Event Status Storage screen The Type column displays the type of storage device The Disk Bad column displays the percentage of bad sectors Not formatted indicates the device is not formatted The Temperature column displays the temperature of the storage device The S M A R T column displays Good Bad or N A depending on storage condition
139. usesseueeessansensnsaes 21 Figure 10 System User Setup Screen cceccccceeeceeeeeeeeeeaeeeeeseeeeeeaeeeeseeeeeeseeeeesseeeeesaeeeeesaaeeeesaeeeeesanes 23 Figure 11 System Storage Setup screen ccceccccssececceescecceuececseseeeecaucecseeeesseeeeseaeeesssaueeesseneessaaes 25 Figure 12 System System Event Setup screen cccceececcsseeccceseeeeceeececceuseecseaseessuseeesseuseessensesssages 26 Figure 13 Record General Setup screen ccccseccccceseecceececceuseecseeecsauscecsaueeessaeessaueeesseueeesseneeesssaes 27 Figure 14 Record Schedule Setup screen ccccccseeceeceeeeeeeeeeeeeeaeeeeesaeeeeeseeeeeseeeeeesaaeeeeseeeeesaeseeesaaes 28 Figure 15 Schedule Settings Advanced Mode Setup screen occccooccccccnnccnccnccnncnonononnncnnnononcnnnnaninnonos 29 Figure 16 Record Pre Event Setup screen ccccccccsseccssececesececeuceceueeseueeecseceseueesseusessueeensetensesensaess 30 Figure 17 Event Motion Setup Serial 31 Figure 18 Event Alarm n Setup SCreen ccooncccononnnccnononcncnnnnconannnoncnnnnnnnnononnonnnnnnnnnnnnnnrnnnnnrnnnnnnnannnonens 32 Figure 19 Event Video LOSS Setup SCreenN oocccconccoccnccoonccnonnncanononcnnnnnncnnnnnonanononnnnnnnnnnnnnnnnnnnrnnnnennnnnes 33 Figure 20 Event Video Blind setup screen cccccccsececesecessececesceneueeseeeeceeseteueessaeessuesensusensaeeeseaees 34 Figure 21 Event Text ln Setup sc
140. vices if the PTZ port is set to RS232 or RS485 AUTODOME BOSCH C CC501 TOA CDC 2500 Costar CDC2400 DynaColor CRD J6416 Chilsung CRR 1660s Fine CRX 1401 ERAESEEDS D protocol Pelco Dennard2060 Dennard DMP 1223 Tokina DRX 500 Dongyang Unitech DY 255RXC Dongyang Delta Dome ll Ultra IV Sensormatic Fastrax HiTron Fastrax2 HiTron Fastrax llE HiTron G3 Basic AutoDome Philips GRU604A LG Honeywell HDC 655 Honeywell HSD 25X LG Honeywell HSDN 251 Honeywell IRX 100 IDIS KD6 Ultrak WN 7 Casian Men LA Highlight the box in the Product column for the PTZ camera you wish to configure and press the button A list of PTZ devices appears Select your camera from the list and press the E button You will need to connect the camera to the RS232 or RS485 connector on the back of the DVR following the camera manufacturer s instructions You can assign IDs to each camera by highlighting the box under the ID heading and pressing the button Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number The PTZ ID number can be set from 0 to 256 Highlight the Setup box and press the button The Port Setup window appears 38 Port Setup RS232 Baud Rate 9600 Data Bit Stop Bit Parity Cancel Configure the port s setting based on the PTZ camera manufacturer s instructions Digital Video Re
141. xt In Search Time Transaction 2013 05 14 08 22 14 Unit price Qty amount 2013 05 14 08 22 13 Unit price Qty amount 2013 05 14 08 22 12 Unit price Qty amount 2013 05 14 08 22 11 Unit price Qty amount 2013 05 14 08 22 10 Unit price amount 2013 05 14 08 22 08 Unit price amount 2013 05 14 08 22 07 Unit price amount 2013 05 14 08 22 06 Unit price amount 2013 05 14 08 22 05 Unit price amount 2013 05 14 08 22 04 Unit price amount 2013 05 14 08 22 03 Unit price amount 2013 05 14 08 22 02 Unit price amount 2013 05 14 08 22 01 Unit price amount 2013 05 14 08 22 00 Unit price amount 2013 05 14 08 21 58 Unit price amount Option Figure 51 Text In Search screen The DVR maintains a log of each time there is Text Input The Text In Search screen displays this list Use the arrow buttons to highlight the event for which you would like to see video 12 Digital Video Recorder Pressing the Play Pause button will extract the video associated with the Text Input and display the first image of the event Pressing the button will start playing the event video segment Pressing SEARCH returns to live monitoring NOTE Itis possible that no recorded image displays on the current screen Press the button and change the screen mode to 4x4 You will be able to easily see the camera have recorded video during target time Text Input information will be overlaid on the image while the recorded video is pl
142. ys the file format to be uploaded on the FTP site Highlight the and press the button to register a FTP site max 5 Site Info NOTE Highlight the box beside Site and press the button A list of the Site registered FTP sites is displayed Select an FTP site from the list If the eee Use setting of the NetFS site is set to other than ALL or Clip Copy you ees cannot select the FTP site You can change the Use setting or register other Rimis pal FTP sites in the NetFS setup screen on the Network menu User Highlight the box beside Upload File and press the button You can select between CBF and JPG When selecting CBF the DVR will upload an event detected video clip on the FTP site When selecting JPG the DVR will attach the event detected image file JPEG format on the FTP site Cancel The Site Info box displays the FTP site information For the FTP notification to work properly the related settings should be configured e Network menu gt NetFS tab gt Use setting e Event menu gt Actions Notify FTP setting When you delete an FTP site in the NetFS setup screen on the Network menu the FTP site in the FTP setup screen on the Notification menu will be deleted too If many event occurs during a short period images may not be uploaded on the FTP site The FTP notification is not supported for system events If upload fails several times it deletes the images or video

DVR ED2916 - Advanced Technology Video

Contents

Download Pdf Manuals

Related Search

Related Contents