User`s manual FLIR DM93
Contents
1. Figure 5 1 Disconnected component 4 5 5 11 Set the function switch to the A position Insert the black probe lead into the negative com terminal and the red probe lead into one of the following positive terminals e A for high current measurements e mA for low current measurements Use the button to select AC DC or AC DC voltage measurement e The indicator will be displayed for AC measurements The indicator will be displayed for DC measurements N e The indicator will be displayed for AC DC measurements Connect the probe leads in series with the part in accordance with Figure 5 1 Read the current value on the display Extended functionality In addition to the basic measurements the meter can be set to different modes for extended functionality T559824 r AH 9541 9541 en US 19 netzerotools com netzerotools com 5 Operation 5 11 1 Selecting the mode The mode icons applicable for the selected measurement type are displayed in the lower part of the display When a mode is enabled the icon is framed D KR ER wp P Hz A E dm HR Giz Figure 5 2 Mode icons AC voltage measurements Peak mode and Silent mode are enabled 1 Press the 4 or P button to navigate to the desired mode icon The currently selected icon will flash OK 2 Press the L button to enable the selected flashing mode 3 Press the A or W button to step through the mode options Refer2. 0 0 c eee 19 5 11 Extended Na 19 5 12 Normal hold mode and Auto hold mode 24 5 13 Locked MOG EO 25 5 14 Streaming measurement data using Bluetooth 25 6 ADUANA 26 6 1 Cleaning and storage 0c cece eee 26 6 2 Battery dagu SA 26 7559824 r AH 9541 9541 en US v netzerotools com netzerotools com Table of contents 6 3 Fuse replacements u aeg 26 6 4 Disposal of electronic waste c cece ee eee 26 7 Technical specifications 7 1 General specifications 7 2 Electrical specifications 8 Technical support 9 AUEI 9 1 FLIR Global Limited Lifetime Warranty 36 9 2 FLIR Test and Measurement Limited 2 Year War iazraSeg da arrak is tag sa niet Aleks tee 37 7559824 r AH 9541 9541 en US vi netzerotools com netzerotools com 1 Disclaimers 1 1 Copyright 2013 FLIR Systems Inc All rights reserved worldwide No parts of the software including source code may be re produced transmitted transcribed or translated into any language or computer language in any form or by any means electronic magnetic optical manual or otherwise without the prior written permission of FLIR Systems The documentation must not in whole or part be copied photocopied reproduced translated or transmitted to any electronic medium or machine readable form without prior consent in writing from FLIR Systems Names and mark
3. Table 7 9 Capacitance Range Resolution Accuracy 40 00 nF 10 pF 1 2 20 dgt 400 0 nF 100 pF 4 000 uF 1 nF 0 9 2 dgt 40 00 uF 10 nF 400 0 uF 100 nF 4 000 mF 1 uF 1 2 20 dgt 40 00 mF 10 uF 2 0 20 dgt T559824 r AH 9541 9541 en US netzerotools com 33 netzerotools com 7 Technical specifications Input protection 1000 V DC or 1000 VAC RMS Table 7 10 Temperature Range Resolution Accuracy 328 F to 2192 F 0 1 F 1 0 36d 200 C to 1200 C 0 1 C 1 0 20d Input protection 1000 V DC or 1000 VAC RMS Note Accuracy specification assumes the ambient temperature is stable to 1 C 1 8 F For ambient temperature changes of 5 C 9 F the rated accu racy applies after 1 hour T559824 r AH 9541 9541 en US netzerotools com 34 netzerotools com 8 Technical support 7559824 r AH 9541 9541 en US netzerotools com 35 netzerotools com 9 Warranties 9 1 FLIR Global Limited Lifetime Warranty A qualifying FLIR Test and Measurement product the Product purchased either directly from FLIR Commer cial Systems Inc and affiliates FLIR or from an author ized FLIR distributor or reseller that Purchaser registers on line with FLIR is eligible for coverage under FLIR s Lim ited Lifetime Warranty subject to the terms and conditions in this document This warranty only app
4. A AA R oHm Fs __ 20 noo non ed SOO ETT Wa PHA OH Bm mr Riche a 3 EREAGAKO dr BEA EU 1 Secondary display 2 Main display 3 Bar graph matches the reading on the main display 4 5 Display icons and indicators Indicates that the meter is measuring stabilized voltage Indicates that the measured voltage is greater than 30 V AC or DC Indicates that the Auto select mode is active gt a Slk Indicates that the meter is displaying maximum reading values Indicates that the meter is displaying minimum reading values 4 A Indicates that the meter is displaying the average reading v EO Indicates that the meter is displaying peak maximum values 7559824 r AH 9541 9541 en US 11 netzerotools com netzerotools com 4 Description Indicates that the meter is displaying peak minimum values K Indicates that the meter is in Auto range mode m 33 ya Indicates that the meter is in Hold mode Indicates that the meter is in Locked mode DO Indicates the active memory location 1 99 BEN Indicates the battery voltage status APO Indicates that the auto power off function is enabled Indicates that the meter is measuring AC current or voltage Indicates that the meter is measuring DC current or voltage Indicates that the meter is measurin
5. NetZeroTools netzerotools com User s manual FLIR DM93 True RMS Industrial Multimeter Flir DM93 Industrial Digital Multimeter True RMS netzerotools com netzerotools com netzerotools com netzerotools com User s manual FLIR DM93 7559824 r AH 9541 9541 en US netzerotools com netzerotools com netzerotools com netzerotools com Table of contents 1 DisclaiMei Sopian cece ee ecee ences nerea eee a E 1 1 1 leiala 1 1 2 eU LAKE 1 1 3 Documentation updates 00 cce cece eee eee 1 1 4 Disposal of aue 1 2 Safety LAAEN 2 2 1 FCC Sala 5 2 2 Industry Canada compliance ceeeeeee eee 6 3 Lula LEN 7 3 1 Key SOEK een 7 4 BIGA UEN 8 4 1 Meter descriptions 8 4 2 Function switch we aieieavaake neces 9 4 3 Function Haura E 10 4 4 Display ala 11 4 5 Display icons and indicators c cece cece 11 5 EGUAN 14 5 1 Powering the GIG eeren green zergen nen 14 5 2 Auto Manual select mode cc cece cece eee 14 5 3 Auto Manual aA 15 5 4 Voltage measurements cece cece eee eee eens 15 5 5 Resistance measurements 0 00 cece cece cece eee eee 16 5 6 Gontinuityitest u a ee aaa 16 5 7 DIOGSHEST u u a Mente cotta Sait td Cae ratte ane 17 5 8 Capacitance measurements ccceeeee eee eee 18 5 9 Type K temperature measurements 0 cece eee 18 5 10 Current measurements
6. temperature through a thermocouple adapter The type of meas urement is selected by the button E The meter can measure current through the probe inputs 4 3 Function buttons e Use the button to select Auto select or Manual select mode see section 5 2 Auto Manual select mode page 14 e In Manual select mode press the button to change the operat ing mode e Use the button to select Auto range or Manual range mode see section 5 3 Auto Manual range mode page 15 e In Manual range mode press the button to change the range scale e Press the button to toggle between Normal and Hold mode see section 5 12 Normal hold mode and Auto hold mode page 24 e Press and hold the button for 5 seconds to enable disable Locked mode see section 5 13 Locked mode page 25 ry IEE p Vv Use the selector pad to enable extended functionality modes and to navigate in mode options Press the button to exit an extended functionality mode T559824 r AH 9541 9541 en US 10 netzerotools com netzerotools com 4 Description e Press the button to enable disable the display backlight e Press and hold the button for 2 seconds to enable disable the work light Press the button to enable disable METERLiINK Bluetooth communication see section 5 14 Streaming measurement data using Bluetooth page 25 4 4 Display description eea 1 4
7. 0 4d GE dete 1000V 05 2q 4 0 444 Unspeci Unspeci fied fied 1 Below 10 of range add 10d to accuracy 2 Frequency range 1k to 2k Hz Input protection 1000 V DC or 1000 V AC RMS Input impedance e mV 1 MQ lt 100 pF e V 10 MQ lt 100 pF Bandwidth 40 Hz to 20 kHz Minimum resolution 1 uV in the 40 mV range CMRR NMRR common normal mode rejection ratio 7559824 r AH 9541 9541 en US 29 netzerotools com netzerotools com 7 Technical specifications e VAC CMRR gt 60 dB at DC 50 Hz 60 Hz e VDC CMRR gt 100 dB at DC 50 Hz 60 Hz NMRR gt 50 dB at DC 50 Hz 60 Hz AC conversion type AC coupled true RMS responding calibrated to the sine wave input For non sine waves add the following crest factor corrections e Fora crest factor of 1 4 2 0 add 1 0 to the AC accuracy e Fora crest factor of 2 0 2 5 add 2 5 to the AC accuracy e Fora crest factor of 2 5 3 0 add 4 0 to the AC accuracy Table 7 2 Current Resolution of specifications in the 3 digit mode Mode Range Accuracy 40 00 mA 400 0 mA 0 2 1d DC 4 000 A 10 00A 0 2 2d 40 Hz to 70 70 Hzto 1 1 kHz to 10 Hz kHz kHz 40 00 mA 1 0 2d 2 0 4d 2 0 4d2 400 0 mA AC 4 000 A 1 0 2d 2 0 4d Unspecified 10 00 A 1 Below 5 of the AC range add 20 dgt to the accuracy 2 Below 10 of range add 10 d to accuracy Input protection Equipped with a high energy fuse e mA 440
8. 7559824 r AH 9541 9541 en US 7 netzerotools com netzerotools com 4 Description 4 1 Meter description SELIR om3 N e Figure 4 1 Front view LCD display Function buttons see section 4 3 Function buttons page 10 Selector pad Function switch see section 4 2 Function switch page 9 Probe input terminals ron T559824 r AH 9541 9541 en US netzerotools com netzerotools com 4 Description Figure 4 2 Rear view Probe clips Tilt stand Work light Battery compartment cover PON 4 2 Function switch LoZ The meter can measure voltage through the probe inputs A low impedance load is placed across the inputs to stabilize the measurement OFF The meter is in full power saving mode SO The meter can measure high voltage V through the probe inputs mV The meter can measure low voltage mV through the probe inputs 7559824 r AH 9541 9541 en US 9 netzerotools com netzerotools com 4 Description Qe The meter can measure resistance continuity or diode polarity through the probe inputs The type of measurement is selected by the button dar The meter can measure capacitance through the probe inputs or
9. A WARNING Do not replace the batteries or the fuses before you remove the test leads This can cause damage to the instrument and can cause injury to persons A WARNING Do not use the device if the test leads and or the device show signs of dam age Injury to persons can occur A WARNING Be careful when you do the measurements if the voltages are more than 25 VAC rms or 35 VDC There is a risk of shock from these voltages Injury to per sons can occur A WARNING Do not do diode resistance or continuity tests before you have removed the power from capacitors and other devices under test during a measurement Injury to persons can occur T559824 r AH 9541 9541 en US netzerotools com netzerotools com 2 Safety information A WARNING Do not use the device as a tool to identify live terminals You must use the cor rect tools Injury to persons can occur if you do not use the correct tools A WARNING Make sure that children cannot touch the device The device contains danger ous objects and small parts that children can swallow If a child swallows an object or a part speak with a physician immediately Injury to persons can occur A WARNING Do not let children play with the batteries and or the packing material These can be dangerous for children if they use them as toys A WARNING Do not touch expired or damaged batteries without gl
10. Hold A mode where auto hold mode and normal hold mode can be set For more information about these modes see section 5 12 Normal hold mode and Auto hold mode page 24 EA Use the selector pad to select and enable Setup mode 1 2 Press the or W button to cycle through the mode options APO b Lit Cntin AHold and RESET shown on the secondary display 7559824 r AH 9541 9541 en US 23 netzerotools com netzerotools com 5 Operation OK 3 Press the button to activate the displayed option e APO Press the 4 or P button to change the auto power off time b Lit Press the 4 or P button to change the auto backlight off time Cntin Press the or P button to change the continuity threshold e A Hold Press the 4 or P button to set up auto mode and normal mode On means that the hold mode is auto hold mode Off means that the hold mode is normal hold mode OK RESET Press the L button to reset the settings to the factory default 5 11 11 Silent mode In Silent mode the alert beeper is disabled Silent mode does not affect the con tinuity beeper ie Use the selector pad to golei and enable Silent mode 5 12 Normal hold mode and Auto hold mode The meter has two types of hold modes e Normal hold mode e Auto hold mode 5 12 1 Normal hold mode In Normal hold mode the meter freezes and displays the last reading from the main display and continues to display this value To enter exit Normal ho
11. Industry Canada licence exempt RSS standard s Op eration is subjectto the following two conditions 1 this device may not cause in terference and 2 this devicemust accept any interference including interference that may cause undesired operation of thedevice A CAUTION Exposure to Radio Frequency Radiation To comply with RSS 102 RF exposure compliance requirements for mobile configurations a separation distance of at least 20 cm must be maintained be tween the antenna of this device and all persons This device must not be co located or operating in conjunction with any other antenna or transmitter T559824 r AH 9541 9541 en US 6 netzerotools com netzerotools com 3 Introduction Thank you for choosing a FLIR DM93 digital multimeter This device is shipped fully tested and calibrated and with proper use will pro vide years of reliable service 3 1 Key features 4000 40 000 counts extra large digital dual display Auto selection AC DC in voltage and current modes On screen menu selection and navigator key drive Variable frequency drive mode low pass filter 0 05 DCV accuracy Low Z measurement Auto hold Peak hold measurement dB dBm measurement 20 000 record automatic data recording capacity 99 record manual data record recall memory Indoor use only 2000 m 6561 Bluetooth interface with software included Safety Category Rating CAT IV 600V CAT IIl 1000V
12. range mode the meter automatically selects the most appropriate meas urement scale In Manual range mode the desired range scale is set manually Auto range mode is the default mode of operation When a new function is se AUTO lected with the function switch the starting mode is Auto range and the BS indi cator is displayed To enter Manual range mode press the button To change the range press the button repeatedly until the desired range is displayed AUTO To enter Auto range mode press and hold the button until the 82 indica tor is displayed 5 4 Voltage measurements 1 Gei e function switch to one of the following positions e Vior high voltage measurements e mV for low voltage measurements e LoZ for voltage measurements using the meter s low input impedance mode The LoZ indicator is displayed 2 Insert the black probe lead into the negative com terminal and the red probe lead into the positive tou terminal 7559824 r AH 9541 9541 en US 15 netzerotools com netzerotools com 5 Operation 3 Use the button to select AC DC or AC DC voltage measurement e The indicator will be displayed for AC measurements The indicator will be displayed for DC measurements N The indicator will be displayed for AC DC measurements 4 Connect the probe leads in parallel to the part under test 5 Read the voltage value on the display 5 5 Resistance measurements A WARNING Do not do diode r
13. setting e Range 10 50 e Increment 1 e Default 30 Q 5 7 Diode test A WARNING Do not do diode resistance or continuity tests before you have removed the power from capacitors and other devices under test during a measurement Injury to persons can occur Qs 1 Set the function switch to the oe position 2 Use the button to select the diode test function The indicator will be displayed 3 Insert the black probe lead into the negative com terminal and the red probe VmvQ lead into the positive Lai terminal 4 Touch the tips of the probe across the diode or semiconductor junction under test Make a note of the value on the display 5 Reverse the polarity of the probes by interchanging the probe test locations 6 Touch the tips of the probe across the diode or semiconductor junction under test Make a note of the new value on the display 7559824 r AH 9541 9541 en US 17 netzerotools com netzerotools com 5 Operation 7 The diode or semiconductor junction can be evaluated as follows e If one of the readings displays a value typically 0 400 V or 0 900 V and the other reading displays OL the component is good e If both readings display OL the component is open e If both readings are very small or 0 the component is shorted 5 8 Capacitance measurements A WARNING Do not take capacitance measurements before you have removed the power from the capacitor or other devi
14. the or W button to change the memory location Use the orP but ton to change the memory location to the beginning or end Press the button to exit the view function e RATE Press the 4 or P button to change the sampling rate OK SEND Press the L button to send the data via Bluetooth The main display will show the percentage of data transfer 0 to 100 Atthe end of the transfer the main display will show End press OK to return to the previous screen During data transfer pressing the CANCEL button will halt the data transfer The key pad will also be locked and only the CANCEL button will be active e START Press the button to start the Automatic Data Recorder EE Press the button again to pause the Automatic Data Recorder Press and hold the button to stop the Automatic Data Recorder 5 11 10 Setup mode In Setup mode you can define the settings for various meter options Auto power off indicated by the text APO A mode where the time period after which the meter enters sleep mode can be set The range is 1 to 30 mi nutes or Off The factory default is 10 minutes Auto backlight off indicated by the text b Lit A mode where the time period after which the backlight turns off can be set The range is 1 to 30 minutes or Off The factory default is 5 minutes Continuity threshold indicated by the text Cntin A mode where the threshold for continuity tests can be set Auto hold indicated by the text A
15. 10 mV m 400 00 mV 100 mV 100 mV 4 0000 V 1V 1V 40 000 V 10V 10V V 400 00 V 100 V 100 V 1000 V 600 V Unspecified 40 000 mA 10 mA p mA Unspecified 400 00 mA 100 mA 4 0000 A 1A d A Unspecified 10 000 A 6A Table 7 6 Resistance Resolution of specifications in the 3 digit mode Range Resolution Accuracy 400 0 Q 100 mQ 0 2 2 dgt 4 000 kQ 10 40 00 KQ 100 0 2 1 dgt 400 0 KQ 100 Q 4 000 MQ KO 1 0 1 dgt 40 00 MQ 10kQ 2 0 20 dgt Input protection 1000 V DC or 1000 V AC RMS Maximum open circuit voltage Approx 2 5 V Maximum short test current Approx 0 1 mA T559824 r AH 9541 9541 en US netzerotools com 32 netzerotools com 7 Technical specifications Table 7 7 Continuity check Resolution of specifications in the 3 digit mode Range Resolution Accuracy 400 0 Q 100 mQ 0 2 2 dgt Input protection 1000 V DC or 1000 V AC RMS Maximum open circuit voltage Approx 2 5 V Maximum short test current Approx 1 mA Continuity threshold Default lt 30 Q Continuity response time 10 ms for lt 10 Q 200 ms for gt 10 Q Continuity indicator 2 KHz tone buzzer Table 7 8 Diode test Range Resolution Accuracy 2 000 1mV 1 5 2 dgt Input protection 1000 V DC or 1000 VAC RMS Maximum open circuit voltage Approx 2 5 V Maximum short test current Approx 1 mA
16. 2 x 7 4 with holster Safety Complies with IEC 61010 1 CAT IV 600 V CAT III 1000 V IEC 61010 2 033 The Bluetooth range is 10m 32ft maximum 7559824 r AH 9541 9541 en US 27 netzerotools com netzerotools com 7 Technical specifications CAT Application field l Circuits not connected to mains ll Circuits directly connected to a low voltage installation I Building installation IV Source of the low voltage installation EMC EN 61326 1 Pollution degree 2 Shock vibration Per MIL PRF 28800 for a Class 2 instrument Drop protection 1 5 m 5 7 2 Electrical specifications e Accuracy is of reading number of digits dgt at 18 28 C 64 4 82 4 F lt 80 RH e For specifications in the 4 digit mode multiply the number of digits by 10 e For the best measurements use the REL A function to compensate for offsets 7559824 r AH 9541 9541 en US 28 netzerotools com netzerotools com 7 Technical specifications Table 7 1 Voltage Resolution of specifications in the 3 34 digit mode Mode Range Accuracy 40 00 mV 0 05 3d 400 0 mV bG 4 000 V 40 00 V 0 05 1d 400 0 V 1000 V 40 Hz to 70 Hz to 1 kHz to 5 kHz to 70 Hz 1 kHz 5k Hz 20 kHz 40 00 mV 9 5 2d 1 0 4d 2 0 4d dek 400 0 mV 4 000 V 0 5 2d 1 0 4d 2 0 4d Sa AC 40 00 V o o i 400 0V 0 5 2d 1
17. 6 4 Disposal of electronic waste As with most electronic products this equipment must be disposed of in an envi ronmentally friendly way and in accordance with existing regulations for elec tronic waste Please contact your FLIR Systems representative for more details 7559824 r AH 9541 9541 en US 26 netzerotools com netzerotools com 7 Technical specifications 7 1 General specifications Maximum voltage applied to any terminal 1000 V DC or 1000 V AC RMS Display count 4000 40 000 Polarity indication Automatic positive implied negative indicated Over range indication OL Measuring rate 10 samples per second Power requirements 6 x1 5 V AAA alkaline batteries Battery life Approx 100 hours with alkaline batteries backlight work light and Bluetooth are off Low battery voltage Approx 7 0 V Auto power off Default 10 minutes Operating ambient temperatures and relative humidity e 10 C to 30 C 14 F to 86 F lt 85 RH e 30 C to 40 C 86 F to 104 F lt 75 RH e 40 C to 50 C 104 F to 122 F lt 45 RH Storage temperature and relative humidity 30 C to 60 C 22 F to 140 F 0 80 RH batteries not fitted Temperature coefficient 0 1 x specified accuracy C lt 18 C gt 28 C Operating altitude 2000 m 6550 Calibration cycle once per year Weight 465 g 1 Ibs including batteries Dimensions H x W x L 52 mm x 83 mm x 188 mm 2 0 x 3
18. BLE BATTERIES FLIR FURTHER EXPRESSLY DISCLAIMS ANY WARRANTY COVERAGE WHERE THE ALLEGED NONCONFORMITY IS DUE TO NOR MAL WEAR AND TEAR OTHER ALTERATION MODIFI CATION REPAIR ATTEMPTED REPAIR IMPROPER USE IMPROPER MAINTENANCE NEGLECT ABUSE IMPROPER STORAGE FAILURE TO FOLLOW ANY PRODUCT INSTRUCTIONS DAMAGE WHETHER CAUSED BY ACCIDENT OR OTHERWISE OR ANY OTHER IMPROPER CARE OR HANDING OF THE PRODUCTS CAUSED BY ANYONE OTHER THAN FLIR OR FLIR S EXPRESSLY AUTHORIZED DESIGNEE THIS DOCUMENT CONTAINS THE ENTIRE WAR RANTY AGREEMENT BETWEEN PURCHASER AND FLIR AND SUPERSEDES ALL PRIOR WARRANTY NE GOTIATIONS AGREEMENTS PROMISES AND UNDERSTANDINGS BETWEEN PURCHASER AND FLIR THIS WARRANTY MAY NOT BE ALTERED WITH OUT THE EXPRESS WRITTEN CONSENT OF FLIR 6 WARRANTY RETURN REPAIR AND REPLACE MENT To be eligible for warranty repair or replacement Purchaser must notify FLIR within thirty 30 days of dis covering of any apparent defect in materials or workman ship Before Purchaser may return a Product for warranty service or repair Purchaser must first obtain a returned material authorization RMA number from FLIR To obtain the RMA number Owner must provide an original proof of purchase Purchaser is solely responsible for complying with all RMA instructions provided by FLIR including but not limited to adequately packaging the Product for shipment to FLIR and for all packaging and shipping costs FLIR will pay for returning to
19. ECTIVE PRODUCTS IN A MANNER AND BYA SERVICE CENTER AUTHORIZED BY FLIR IF THIS REMEDY IS ADJUDICATED TO BE IN SUFFICIENT FLIR SHALL REFUND PURCHASER S PAID PURCHASE PRICE AND HAVE NO OTHER OBLI GATION OR LIABILITY TO BUYER WHATSOEVER 5 WARRANTY EXCLUSIONS AND DISCLAIMERS FLIR MAKES NO OTHER WARRANTY OF ANY KIND WITH RESPECT TO THE PRODUCTS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER CHANTABILITY FITNESS FOR A PARTICULAR PUR POSE EVEN IF PURCHASER HAS NOTIFIED FLIR OF ITS INTENDED USE FOR THE PRODUCTS AND NON INFRINGEMENT ARE EXPRESSLY EXCLUDED FROM THIS AGREEMENT THIS WARRANTY EXPRESSLY EXCLUDES ROUTINE PRODUCT MAINTENANCE SOFTWARE UPDATES AND REPLACEMENT OF FUSES OR DISPOSABLE BATTERIES FLIR FURTHER EXPRESSLY DISCLAIMS ANY WARRANTY COVERAGE WHERE THE ALLEGED NONCONFORMITY IS DUE TO NORMAL WEAR AND TEAR OTHER ALTERATION MODIFICATION REPAIR ATTEMPTED REPAIR IMPROPER USE IMPROPER T559824 r AH 9541 9541 en US 37 netzerotools com netzerotools com 9 Warranties MAINTENANCE NEGLECT ABUSE IMPROPER STOR AGE FAILURE TO FOLLOW ANY PRODUCT INSTRUC TIONS DAMAGE WHETHER CAUSED BY ACCIDENT OR OTHERWISE OR ANY OTHER IMPROPER CARE OR HANDING OF THE PRODUCTS CAUSED BY ANY ONE OTHER THAN FLIR OR FLIR S EXPRESSLY AU THORIZED DESIGNEE THIS DOCUMENT CONTAINS THE ENTIRE WAR RANTY AGREEMENT BETWEEN PURCHASER AND FLIR AND SUPERSEDES ALL PRIO
20. LIR evaluate and service or repair a Product not cov ered under warranty which FLIR may agree to do in its sole discretion Before Purchaser returns a Product for non warranty evaluation and repair Purchaser must con tact FLIR to request an eval uation and obtain an RMA Purchaser is solely responsible for complying with all RMA instructions pro vided by FLIR including but not limited to adequately packaging the Product for shipment to FLIR and for all packaging and shipping costs Upon receipt of an author ized non warranty return FLIR will evaluate the Product and contact Purchaser regarding the feasibility of and the costs and fees associated with Purchaser s request Pur chaser shall be responsible for the reasonable cost of FLIR s evaluation for the cost of any repairs or services authorized by Purchaser and for the cost of repackaging and returning the Product to Purchaser Any non warranty repair of a Product is warranted for one hundred eighty days 180 days from the date of return shipment by FLIR to be free from defects in materials and workmanship only subject to all of the limitations exclu sions and disclaimers in this document T559824 r AH 9541 9541 en US 38 netzerotools com netzerotools com netzerotools com Net 0 netzerotools com 577 6389 A note on the technical production of this publication This publication was produced using XML the eXtensible Markup Language For more information
21. Purchaser any Product that FLIR repairs or replaces under warranty T559824 r AH 9541 9541 en US 36 netzerotools com Tools 800 577 6389 netzerotools com 9 Warranties FLIR reserves the right to determine in its sole discretion whether a returned Product is covered under Warranty If FLIR determines that any returned Product is not covered under Warranty or is otherwise excluded from Warranty coverage FLIR may charge Purchaser a reasonable han dling fee and return the Product to Purchaser at Purchas er s expense or offer Purchaser the option of handling the Product as a non warranty return 7 NON WARRANTY RETURN Purchaser may request that FLIR evaluate and service or repair a Product not cov ered under warranty which FLIR may agree to do in its sole discretion Before Purchaser returns a Product for non warranty evaluation and repair Purchaser must con tact FLIR to request an eval uation and obtain an RMA Purchaser is solely responsible for complying with all RMA instructions pro vided by FLIR including but not limited to adequately packaging the Product for shipment to FLIR and for all packaging and shipping costs Upon receipt of an author ized non warranty return FLIR will evaluate the Product and contact Purchaser regarding the feasibility of and the costs and fees associated with Purchaser s request Pur chaser shall be responsible for the reasonable cost of FLIR s evaluation for the cost of any r
22. R WARRANTY NE GOTIATIONS AGREEMENTS PROMISES AND UNDERSTANDINGS BETWEEN PURCHASER AND FLIR THIS WARRANTY MAY NOT BE ALTERED WITH OUT THE EXPRESS WRITTEN CONSENT OF FLIR 6 WARRANTY RETURN REPAIR AND REPLACE MENT To be eligible for warranty repair or replacement Purchaser must notify FLIR within thirty 30 days of dis covering of any apparent defect in materials or workman ship Before Purchaser may return a Product for warranty service or repair Purchaser must first obtain a returned material authorization RMA number from FLIR To obtain the RMA number Owner must provide an original proof of purchase Purchaser is solely responsible for complying with all RMA instructions provided by FLIR including but not limited to adequately packaging the Product for shipment to FLIR and for all packaging and shipping costs FLIR will pay for returning to Purchaser any Product that FLIR repairs or replaces under warranty Net Tools 800 571 6389 FLIR reserves the right to determine in its sole discretion whether a returned Product is covered under Warranty If FLIR determines that any returned Product is not covered under Warranty or is otherwise excluded from Warranty coverage FLIR may charge Purchaser a reasonable han dling fee and return the Product to Purchaser at Purchas er s expense or offer Purchaser the option of handling the Product as a non warranty return 7 NON WARRANTY RETURN Purchaser may request that F
23. about XML please visit http www w3 org XML A note on the typeface used in this publication This publication was typeset using Linotype Helvetica World Helvetica was designed by Max Miedinger 1910 1980 LOEF List Of Effective Files T501024 xml en US AH 9541 2013 10 31 T559824 r AH 9541 9541 en US netzerotools com 40 netzerotools com netzerotools com Tools 800 577 6389 Net netzerotools com Publ No Release Commit Head Language Modified Formatted 5 T559 82 T559824 AH 9541 9541 en US 2013 10 31 2013 10 31 4 netzerotools com
24. ata an 1 Use the selector pad to select E and enable Manual Data Recording mode 2 Press the or W button to cycle through the mode options SAVE LOAD and CLEAR shown on the secondary display OK 3 Press the button to activate the displayed option e SAVE The data on the main display is saved to the memory location shown by the EO indicator in the upper part of the display e LOAD The data stored in the memory location shown by the EO indica tor is displayed Use the A or W button to change the memory location Press the button to exit the load function e CLEAR The data in all memory locations is cleared 5 11 9 Automatic Data Recording mode In Automatic Data Recording mode the meter records measurement data at the user programmed sampling rate The recorded data can be recalled at a later time for review Up to 20 000 records can be recorded into memory The sam pling rate can be set to a value in the range 1 to 600 seconds ra 1 Use the selector pad to select rey and enable Automatic Data Recording mode 2 Press the or W button to cycle through the mode options VIEW RATE SEND and START shown on the secondary display 7559824 r AH 9541 9541 en US 22 netzerotools com 5 netzerotools com Operation Press the L button to activate the displayed option e VIEW The secondary display shows the current memory location The main display shows the data stored in the current memory location Use
25. ce or circuit during a test Injury to persons can occur 1 Set the function switch to the 64 position 2 Use the button to select capacitance measurement The F Farad unit will be displayed 3 Insert the black probe lead into the negative com terminal and the red probe VmvQ lead into the positive Loz amp terminal 4 Touch the tips of the probe across the part under test 5 Read the capacitance value on the display Note For very large capacitance values it may take several minutes for the measurement to settle and the final reading to stabilize 5 9 Type K temperature measurements 1 Set the function switch to the 64 position 2 Use the button to select temperature measurement The F or C unit will be displayed 3 While observing the polarity insert the thermocouple adapter into the nega tive com terminal and the positive UET terminal 4 Touch the tip of the thermocouple to the part under test Keep the thermo couple tip on the part until the reading on the display stabilizes 5 Read the temperature value on the display 7559824 r AH 9541 9541 en US 18 netzerotools com netzerotools com 5 Operation 6 To avoid electrical shock disconnect the thermocouple adapter before turn ing the function switch to another position 5 10 Current measurements Current is measured by disconnecting the part under test and connecting the probe leads in series with the part see Figure 5 1
26. e Qualifying PRODUCTS THAT ARE NOT REGISTERED ON LINE WITHIN SIXTY 60 DAYS OF THE PURCHASE DATE WILL HAVE A LIMITED ONE YEAR WARRANTY FROM DATE OF PURCHASE 2 QUALIFYING PRODUCTS Upon registration Test and Measurement products that qualify for coverage under FLIR s Limited Warranty are VS70 Videoscope VSAxx Articulation Camera VSCxx Camera VSSxx Probe Spool VST handset MRO2 Pin Extension Probe and TAxx not including accessories which may have their own warranty 3 WARRANTY PERIODS The applicable Limited War ranty Period measured from the Purchase data are Products Limited Warranty Period VS70 VSAxx VSCxx TWO 2 Years VSSxx VST MRO2 TAxx Any Product that is repaired or replaced under warranty is covered under this Limited Warranty for one hundred eighty days 180 days from the date of return shipment by FLIR or for the remaining duration of the applicable Warranty Period whichever is longer 4 LIMITED WARRANTY In accordance with the terms and conditions of this Limited Warranty and except as ex cluded or disclaimed in this document FLIR warrants from the Purchase Date that all fully registered Products will conform to FLIR s published product specifications and be free from defects in materials and workmanship during the applicable Warranty Period PURCHASER S SOLE AND EXCLUSIVE REMEDY UNDER THIS WAR RANTY AT FLIR S SOLE DISCRETION IS THE REPAIR OR REPLACEMENT OF DEF
27. emove the positive lead before removing the negative lead 5 1 Powering the meter 1 Set the function switch to any position to switch on the meter 2 Ifthe battery indicator EE shows that the battery voltage is low or if the me ter does not power on replace the battery See section 6 2 Battery replace ment page 26 5 1 1 Auto power off The meter enters sleep mode after a programmable number of minutes of inactiv ity see section 5 11 10 Setup mode page 23 The meter beeps three times 10 seconds before powering off Press any button or turn the function switch to prevent the meter from powering off The auto power off time out is then reset 5 2 Auto Manual select mode In Auto select mode the meter attempts to automatically select the proper oper ating mode based on the input signal If the function switch is set to the LOZ v mv or A position the meter attempts to determine if the AC or DC mode should be used 7559824 r AH 9541 9541 en US 14 netzerotools com netzerotools com 5 Operation Auto select mode is the default mode of operation When a new function is se lected with the function switch the starting mode is Auto select and the D indi cator is displayed To enter Manual select mode press the button To manually select the op erating mode press the button repeatedly To enter Auto select mode press and hold the button until the D indicator is displayed 5 3 Auto Manual range mode In Auto
28. epairs or services authorized by Purchaser and for the cost of repackaging and returning the Product to Purchaser Any non warranty repair of a Product is warranted for one hundred eighty days 180 days from the date of return shipment by FLIR to be free from defects in materials and workmanship only subject to all of the limitations exclu sions and disclaimers in this document 9 2 FLIR Test and Measurement Limited 2 Year Warranty A qualifying FLIR Test and Measurement product the Product purchased either directly from FLIR Commer cial Systems Inc and affiliates FLIR or from an author ized FLIR distributor or reseller that Purchaser registers on line with FLIR is eligible for coverage under FLIR s Lim ited Warranty subject to the terms and conditions in this document This warranty only applies to purchases of Qualifying Products see below purchased and manufac tured after April 1 2013 PLEASE READ THIS DOCUMENT CAREFULLY IT CON TAINS IMPORTANT INFORMATION ABOUT THE PROD UCTS THAT QUALIFY FOR COVERAGE UNDER THE LIMITED WARRANTY PURCHASER S OBLIGATIONS HOW TO ACTIVATE THE WARRANTY WARRANTY COVERAGE AND OTHER IMPORTANT TERMS CON DITIONS EXCLUSIONS AND DISCLAIMERS 1 PRODUCT REGISTRATION To qualify for FLIR s Lim ited Warranty Purchaser must fully register the Product di rectly with FLIR within Sixty 60 DAYS of the date the Product was purchased by the first retail customer the Purchase Dat
29. esistance or continuity tests before you have removed the power from capacitors and other devices under test during a measurement Injury to persons can occur Set the function switch to the a position 2 Ensure that the meter is set to resistance measurement The Q unit will be displayed If the or gt indicator is displayed press the button repeatedly until the unit is displayed 3 Insert the black probe lead into the negative com terminal and the red probe VmvQ lead into the positive Loz amp terminal 4 Touch the tips of the probe across the circuit or component under test 5 Read the resistance value on the display 5 6 Continuity test AN WARNING Do not do diode resistance or continuity tests before you have removed the power from capacitors and other devices under test during a measurement Injury to persons can occur Qs 1 Setthe function switch to the da position 7559824 r AH 9541 9541 en US 16 netzerotools com netzerotools com 5 Operation 2 Use the button to select continuity measurement The di indicator will be displayed 3 Insert the black probe lead into the negative com terminal and the red probe lead into the positive HEIN terminal 4 Touch the tips of the probe across the circuit or component under test 5 If the resistance is 30 5 Q nominal or less the meter beeps Note This threshold is user selectable in the SET UP menu under the Cntin
30. for one hun dred eighty days 180 days from the date of return ship ment by FLIR or for the remaining duration of the applicable Warranty Period whichever is longer 4 LIMITED WARRANTY In accordance with the terms and conditions of this Limited Lifetime Warranty and ex cept as excluded or disclaimed in this document FLIR warrants from the Purchase Date that all fully registered Products will conform to FLIR s published Product specifi cations and be free from defects in materials and work manship during the applicable Warranty Period PURCHASER S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY AT FLIR S SOLE DISCRE TION IS THE REPAIR OR REPLACEMENT OF Net DEFECTIVE PRODUCTS IN A MANNER AND BYA SERVICE CENTER AUTHORIZED BY FLIR IF THIS REMEDY IS ADJUDICATED TO BE INSUFFICIENT FLIR SHALL REFUND PURCHASER S PAID PURCHASE PRICE AND HAVE NO OTHER OBLIGATION OR LIABIL ITY TO BUYER WHATSOEVER 5 WARRANTY EXCLUSIONS AND DISCLAIMERS FLIR MAKES NO OTHER WARRANTY OF ANY KIND WITH RESPECT TO THE PRODUCTS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER CHANTABILITY FITNESS FOR A PARTICULAR PUR POSE EVEN IF PURCHASER HAS NOTIFIED FLIR OF ITS INTENDED USE FOR THE PRODUCTS AND NON INFRINGEMENT ARE EXPRESSLY EXCLUDED FROM THIS AGREEMENT THIS WARRANTY EXPRESSLY EXCLUDES ROUTINE PRODUCT MAINTENANCE SOFTWARE UPDATES AND REPLACEMENT OF MANUALS FUSES OR DIS POSA
31. g AC DC current or voltage DI Indicates that the continuity function is active gt t Indicates that the diode test function is active fp VFD mode icon wg Cp Peak mode icon EE a Min Max Avg mode icon EZA TO Frequency mode icon une ER Relative mode icon ey CH 4000 40 000 digit selection LEE Bm dBm mode icon gem IE 99 point Manual Data Recording mode icon EZ 7559824 r AH 9541 9541 en US 12 netzerotools com netzerotools com 4 Description fog 20 000 point Automatic Data Recording Sampling mode icon EA Setup mode icon edi KTE Silent mode icon ut 4 5 1 Probe indicator When the probe leads are not plugged into the correct jack sockets for the meas urement selected by the function switch PROBE is displayed 4 5 2 Out of range warning If the input is over under the full scale range in Manual range mode or if the sig nal has exceeded the maximum minimum input in Auto range mode OL is displayed T559824 r AH 9541 9541 en US 13 netzerotools com netzerotools com 5 Operation Note Before operating the device you must read understand and follow all in structions dangers warnings cautions and notes Note When the meter is not in use the function switch should be set to the OFF position Note When connecting the probe leads to the device under test connect the nega tive lead before connecting the positive lead When removing the probe leads r
32. ld mode press the button In Hold mode the D indicator is displayed 5 12 2 Auto hold mode In Auto hold mode the secondary display freezes the last reading from the main display and continues to display this value The current reading is displayed on the main display The held reading on the secondary display will not change un less the difference between this held reading and any new reading is greater than 50 digits Auto hold limit 7559824 r AH 9541 9541 en US 24 netzerotools com netzerotools com 5 Operation e Function switch in V position lt 0 1 V e Function switch in LoZ position lt 0 1 V e Function switch in mV position lt 1 mV e Function switch in other positions no limit To enter exit Auto hold mode press the button In Auto hold mode the D indicator is displayed and flashing 5 13 Locked mode In Locked mode the meter ignores all button presses except USO The auto power off function see section 5 1 1 Auto power off page 14 is disabled in Locked mode Press and hold the button for 3 seconds to enter exit Locked mode In Locked mode the D indicator is displayed 5 14 Streaming measurement data using Bluetooth 5 14 1 General Some IR cameras from FLIR Systems support Bluetooth communication and to those cameras you can stream measurement data from the meter The data is then merged into the result table in the IR image Streaming measurement data is a convenient way to add imp
33. lies to purchases of Qualifying Products see below purchased and manu factured after April 1 2013 PLEASE READ THIS DOCUMENT CAREFULLY IT CON TAINS IMPORTANT INFORMATION ABOUT THE PROD UCTS THAT QUALIFY FOR COVERAGE UNDER THE LIMITED LIFETIME WARRANTY PURCHASER S OBLI GATIONS HOW TO ACTIVATE THE WARRANTY WAR RANTY COVERAGE AND OTHER IMPORTANT TERMS CONDITIONS EXCLUSIONS AND DISCLAIMERS 1 PRODUCT REGISTRATION To qualify for FLIR s Lim ited Lifetime Warranty Purchaser must fully register the Product directly with FLIR within Sixty 60 DAYS of the date the Product was pur chased by the first retail customer the Purchase Date Qualifying PRODUCTS THAT ARE NOT REGISTERED ON LINE WITHIN SIXTY 60 DAYS OF THE PURCHASE DATE WILL HAVE A LIMITED ONE YEAR WARRANTY FROM DATE OF PURCHASE 2 QUALIFYING PRODUCTS Upon registration Test and Measurement products that qualify for coverage under FLIR s Limited Lifetime Warranty are MR7x CM7x CM amp x DMxx VP5x not including accessories which may have their own warranty 3 WARRANTY PERIODS For purposes of the The Lim ited Lifetime Warranty Lifetime is defined as seven years 7 after the product is no longer manufactured or ten years 10 from date of purchase whichever is greater This Warranty is only applicable to the original owner of the Products Any Product that is repaired or replaced under warranty is covered under this Limited Lifetime Warranty
34. mA 1000 V IR 10 kA fuse Bussmann DMM B 44 100 e A 11 A 1000 V IR 20 kA fuse Bussmann DMM B 11A Input impedance e mA 1 Qat mA input e A 10mQ atA input Bandwidth 40 Hz to 10 kHz 7559824 r AH 9541 9541 en US 30 netzerotools com Tools 800 577 6389 netzerotools com 7 Technical specifications Minimum resolution 1 A in the 40 mA range Maximum measuring time 1 minute at A input 10 minutes at mA input Rest time is 20 minutes minimum AC conversion type The AC conversion type is the same as for the voltage Table 7 3 AC additional specifications Mode Range Accuracy AC DC AC accuracy 1 0 VFD AC accuracy for 40 Same as VandA 400 He Peak hold AC accuracy 3 0 100 dgt for 40Hz to 1kHz Low Z Same as V Accuracy 1 0 The cut off frequency of VFD 800 Hz 3 dB point Attenuation characteristic of VFD Approx 24 dB Table 7 4 Frequency Counter Range Resolution Accuracy 400 00 Hz 0 01 Hz 4 0000 kHz 0 1 Hz 5 dgt 40 000 kHz 1 Hz 100 00 kHz 10 Hz Minimum sensed frequency 5 Hz 7559824 r AH 9541 9541 en US 31 netzerotools com netzerotools com 7 Technical specifications Table 7 5 Frequency counter sensitivity o Tools 800 571 6389 Function Range Sensitivity Sensitivity peak to peak peak to peak 5 Hz to 10 kHz 10 100 kHz ij 40 000 mV 10 mV
35. orresponding icons are displayed 4 l aA v 3 Press the button to pause the Min Max Avg mode Press again to continue or 5 11 5 Frequency mode ACVand ACA only In Frequency mode the frequency is displayed in the main display and the period is displayed in the secondary display Frequency mode is available when measur ing AC voltage or current ys 1 Use the selector pad to select Hz and enable Frequency mode 5 11 6 Relative mode In Relative mode the difference A between the current reading and a stored reference value is displayed in the main display The reference value is displayed in the secondary display rm Use the selector pad to select A and enable Relative mode The reference value is stored when the L button is pressed 5 11 7 dBm mode ACVonly The decibel dB is a logarithmic unit that expresses the magnitude of a physical quantity relative to a specified or implied reference level In dBm mode the meter displays AC voltage measurements in dB or dBm on the secondary display dB and dBm are defined as follows e dB 20 log Vac 1 e dBm 20 log Vac 0 7746 7559824 r AH 9541 9541 en US 21 netzerotools com netzerotools com 5 Operation E 1 Use the selector pad to select Em and enable dBm mode 2 Press the or W button to toggle between the display of dB and dBm 5 11 8 Manual Data Recording mode The meter has 99 memory locations for the storage of measurement d
36. ortant information to an IR image For example when identifying an overheated cable connection you may want to know the current in that cable The Bluetooth range is 10m 32ft maximum 5 14 2 Procedure 1 Pair the IR camera with the instrument Refer to the camera manual for infor mation on how to pair Bluetooth devices 2 Turn on the camera 3 Turn on the meter 4 Press the on the meter to enable Bluetooth 5 Choose the variable that you want to use voltage current resistance etc Results from the meter will now automatically be displayed in the result table in the top left corner of the IR camera screen 7559824 r AH 9541 9541 en US 25 netzerotools com netzerotools com 6 Maintenance 6 1 Cleaning and storage Clean the meter with a damp cloth and mild detergent do not use abrasives or solvents If the meter is not to be used for an extended period remove the batteries and store them separately 6 2 Battery replacement 1 To avoid electrical shock disconnect the meter if connected to a circuit re move the probe thermocouple leads from the terminals and set the function switch to the OFF position before attempting to replace the batteries Unscrew and remove the battery compartment cover 3 Replace the six standard AAA batteries observing correct polarity 4 Secure the battery compartment cover b 6 3 Fuse replacement The fuses are accessed via the battery compartment cover
37. oves Injury to persons can occur A WARNING Do not cause a short circuit of the batteries This can cause damage to the in strument and can cause injury to persons A WARNING Do not put the batteries into a fire Injury to persons can occur A CAUTION Do not use the device for a procedure that it is not made for This can cause damage to the protection T559824 r AH 9541 9541 en US netzerotools com netzerotools com 2 Safety information This symbol adjacent to another symbol or terminal indicates that the user must refer to the manual for further information This symbol adjacent to a terminal indicates that under normal use hazardous voltages may be present Double insulation D b E dile LISTED UL listing is not an indication or a verification of the accuracy of the meter 2 1 FCC Complicance This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential instal lation This equipment generates u
38. s appearing on the products herein are either registered trademarks or trademarks of FLIR Sys tems and or its subsidiaries All other trademarks trade names or company names referenced herein are used for identification only and are the property of their respective owners 1 2 Quality assurance The Quality Management System under which these products are developed and manufactured has been certi fied in accordance with the ISO 9001 standard FLIR Systems is committed to a policy of continuous de velopment therefore we reserve the right to make changes and improvements on any of the products with out prior notice Net Is 800 571 6389 1 3 Documentation updates Our manuals are updated several times per year and we also issue product critical notifications of changes on a regular basis It only takes a few minutes to register online In the down load area you will also find the latest releases of manuals for our other products as well as manuals for our historical and obsolete products 1 4 Disposal of electronic waste As with most electronic products this equipment must be disposed of in an environmentally friendly way and in ac cordance with existing regulations for electronic waste Please contact your FLIR Systems representative for more details T559824 r AH 9541 9541 en US netzerotools com netzerotools com 2 Safety information Note Before operating the device you must read under
39. ses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encouraged to try to cor rect the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help 7559824 r AH 9541 9541 en US 5 netzerotools com netzerotools com 2 Safety information A CAUTION Exposure to Radio Frequency Radiation To comply with FCC IC RF exposure compliance requirements a separation distance of at least 20 cm must be maintained between the antenna of this de vice and all persons This device must not be co located or operating in con junction with any other antenna or transmitter A WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 2 Industry Canada compliance This device complies with
40. stand and follow all in structions dangers warnings cautions and notes Note FLIR Systems reserves the right to discontinue models parts or accessories and other items or to change specifications at any time without prior notice Note Remove the batteries if the device is not used for an extended period of time A WARNING Do not operate the device if you do not have the correct knowledge Formal qualifications and or national legislation for the electrical inspections can ap ply Incorrect operation of the device can cause damage shock injury or death to persons A WARNING Do not start the measuring procedure before you have set the function switch to the correct position This can cause damage to the instrument and can cause injury to persons A WARNING Do not change to current or resistance when you measure the voltage This can cause damage to the instrument and can cause injury to persons T559824 r AH 9541 9541 en US netzerotools com netzerotools com 2 Safety information AN WARNING Do not measure the current on a circuit when the voltage increases to more than 1000 V This can cause damage to the instrument and can cause injury to persons AN WARNING You must disconnect the test leads from the circuit that you did a test on be fore you change the range If you do not do this damage to the instrument and injury to persons can occur
41. to the sec tion related to the specific mode for detailed instructions 4 Pressthe 5 button to disable the selected flashing mode 5 11 2 VFD mode ACV and ACA only In VFD variable frequency drive mode high frequency noise is eliminated from the voltage measurement by a low pass filter VFD mode is available when meas uring AC voltage or AC current Ke 1 Use the selector pad to select W and enable VFD mode 5 11 3 Peak mode ACV and ACA only In Peak mode the meter captures and displays the positive and negative peak values and updates only when a higher lower value is registered rm 1 Use the selector pad to select LP J and enable Peak mode 2 Press the or E button to toggle between the display of Peak Max and Peak Min T e In Peak Max mode the indicator is displayed e InPeak Min mode the amp indicator is displayed 3 Press the button to pause the Peak mode Press again to continue 7559824 r AH 9541 9541 en US 20 netzerotools com netzerotools com 5 Operation 5 11 4 Min Max Avg mode In Min Max Avg mode the meter captures and displays the minimum or maxi mum values and updates only when a higher lower value is registered The meter also averages the total sum of all recorded values a 1 Use the selector pad to select U and enable the Min Max Avg mode 2 Press the amp or W button to cycle through the minimum maximum and a average reading displays The c
Download Pdf Manuals
Related Search