SC-2kg - American Weigh Scales
Contents
1. AWS Arnercan Weigh Scales Inc SC Series Digital Pocket Scale SC 501 500x0 01g SC 2kg 2000x0 1g User Manual SC Series Manual Thank you for purchasing the American Weigh SC Series digital pocket scale Please read all operating instructions carefully before use Scales are precision instruments and should always be handled with proper care To ensure years of reliable service keep these simple tips in mind Do not exceed the scales maximum capacity Overloading your scale can permanently damage it e Avoid exposure to extreme heat or cold Scales perform best at normal room temperature If temperatures have changed dramatically recalibration may be necessary Allow your scale to warm up for 30 60 seconds before performing calibration if available e Store your scale in a clean dry location Dust dirt and moisture can accumulate on the weighing sensors and electronics causing innacuracy or malfunction e Avoid using your scale in close proximity to strong radio wave emitting devices such as computers cash registers and cordless phones e Always weigh on a flat and level surface free from vibrations and drafts The corner of a room is usually the most stable e Gently apply all items to be weighed Do not drop items onto the weighing platform e Avoid dropping your scale The warranty does not cover damage due to rough treatment or overload I SCALE OPERATION Place the scale on a horizontal flat su2. ale and press the MODE button 8 SC 501 only The display will now show the third required calibration weight 9 SC 501 only Place the required weight on the scale and press the MODE button 10 The display will show PASS Calibration is complete IV TROUBLESHOOTING The primary reasons for inaccuracy or malfunction are low batteries incorrect calibration overload or operating on an unstable surface Please keep this in mind and maintain and operate your scale properly This scale is a precise instrument and must be handled with the utmost care and caution Display Elimination of errors Lo Change the batteries OUE2 Recalibrate the scale as shown above O_Ld You are overloading the scale Remove the excessive load immediately UnST Use the scale in a more stable position Specifications 0 01g 0 0010z 0 05ct 0 2gn Model SC 501 SC 2kg Capacity 500g 17 64oz 2500ct 7716 20009 beers patent Resolution 0 1g 0 010z 0 010zt 0 1dwt Weighing Units g oz ct gn g oz ozt dwt Calibration Weight not Included 100g and 2x 200g calibrates at 100g 300g and 500g 1000g and 2000g Platform Dimensions inches 4 0 x 4 0 Stainless Steel Scale Dimensions inches 5 0x4 1x0 7 Power 2 x AAA Batteries included Warranty 10 Year Warranty
3. rface 1 Press ON OFF key 2 Wait until 0 0 or 0 00 is displayed 3 Place the object s on the weighing platform 4 By pressing the MODE key you can switch between weighing units 5 The removable covers can also be used as weighing trays Il TARE WEIGHING 1 Turn on the scale as described above 2 Place a tray or container on the scale platform 3 Press the TARE button 0 0 will be displayed 4 You can now add items to the container or tray to obtain just the weight of the contents 5 When the container is removed a negative number will be displayed Press TARE again to zero the scale Ill CALIBRATION This scale has come pre calibrated at the factory Only re calibrate if you are experiencing trouble weighing SC 501 uses a 100g and 2x 200g calibration weight SC 2kg uses a 1kg and a 2kg calibration weight 1 Turn the scale OFF 2 For model SC 2kg While holding the MODE key tap the ON OFF key to turn the scale on then release both keys For model SC 501 While holding the TARE key tap the ON OFF key to turn the scale on then release both keys 3 The display will show a random number 4 Press the MODE key The display will show the first required calibration weight 5 Place the required weight on the scale and press the MODE button 6 The display will now show the second required calibration weight 7 Place the required weight on the sc
Download Pdf Manuals
Related Search