Home

English

1. Ribbon cassette 210 mm in width A Caution Set the paper and ribbon without putting them directly on the work surface If dust or dirt adheres to the media when setting it inside the printer unit it may adversely affect the print quality 15 Printer Installation Setting the media paper ribbon Release the opening lever and pull out the mechanism unit Opening lever Front cover Scrap box Hold the center and lift it up straight A Caution Never remove the scrap box diagonally The scrap box may be damaged and the product may not operate normally When the scrap box has been removed do not touch the cutter on the upper part or you may be cut 16 Printer Installation Remove the paper cassette including the attached paper holders Nae I _ o gt a ij rer _ _ D Remove the old paper roll from the paper holders and set the new paper roll Set the roll so that there is no gap between the paper and the holder Set the paper so that it does not protrude from the roll If the paper protrudes remove the roll from the paper holder and align it A Caution The paper holders with a new paper roll set on it weigh approximately 2 1 kg Do not let them fall as they may cause physical injury or damage to the paper holders 17 Printer Installation Set the paper holders into the paper cassette Set the paper roll wit
2. Check that no partially printed paper remains in the printer If partially printed paper remains refer to The printer is jammed with paper see P 23 A Caution Do not turn the printer off during printing This may cause a malfunction 26 Platen roller If indents appear at the same places on the printout at a regular interval approximately every 50 mm or if the back of the printout white side is dirty clean the platen roller There may be dust dirt adhesive etc from the ribbon or paper on the platen roller Prepare a piece of gauze or other soft cloth moistened with ethyl alcohol Do not use benzene or thinners which may damage plastic materials Perform the steps to of Setting the media paper ribbon Wipe off all the dirt while turning the platen roller Platen roller A Caution Do not use benzene or thinners which may damage plastic materials Always turn the printer off before cleaning the roller Otherwise you may injure or burn yourself The parts with the A label become very hot as soon as printing starts Wait for these parts to cool down before cleaning to prevent burns 27 Specifications Print method Thermal dye sublimation transfer Standard 11 8 x 11 8 dot mm 300 x 300 dpi 11 8 x 23 6 dot mm 300 x 600 dpi 203 mm x 102 mm Print size When using roll paper 203 mm x 305 mm Print sheet When using roll paper USB2 0 max 480 Mbps TYPE B co
3. not use an optional Turning Unit Knurled screw Use to fix the blind plate Scrap box Blind plate Opening lever Power switch Attach to the bottom of the unit m Back of the unit m Side of the unit Terminal for the optional unit Turning Unit Vent Power inlet Vents A Caution Be careful not to hurt yourself or damage anything on the edges of the printer 13 Printer Installation Connecting the power cord and a computer Make sure that the power switch of the printer unit and the computer are turned off Plug the connector of the power cord supplied into the printer power inlet Plug the power cord into the wall outlet Connect the printer to the computer with a USB cable Turn the printer unit and the computer on ON qo Connecting the Turning Unit Refer to the Operating Instruction supplied with the optional Turning Unit Make certain the power is turned off before connecting or disconnecting the Turning Units cable Do not drag or carry the Turning Unit by the cable A Caution Use the power cable supplied with the printer and be sure to connect the ground wire Use a shielded USB cable compatible with the USB 2 0 specifications Otherwise unexpected troubles may arise 14 USB port Power inlet Printer Installation Paper and ribbon Prepare the media paper ribbon with the following widths 203 mm in width Ribbon Ribbon Ribbon cassette
4. scrap box is not installed If the mechanism unit is closed when the scrap box is not installed the No Scrap Box error will occur and the error LED will flash see Error display P 22 A Caution Never remove the scrap box diagonally The scrap box may be damaged and the product may not operate normally When the scrap box has been removed do not touch the cutter on the upper part or you may be cut Troubles may occur if the printer is used when the scrap box is full 21 Troubleshooting Error display The LEDs condition lit flashing off indicates the product status mmm It CC flashing off E E ae POWER RIBBON PAPER ERROR POWER RIBBON Ribbon end Set a new ribbon PAPER ERROR POWER RIBBON Door is open Properly set the paper and then close PAPER no paper the mechanism unit ERROR Paper end Set a new roll of paper POWER RIBBON l Door is open Close the mechanism unit PAPER ERROR POWER RIBBON No scrap box Set the scrap box PAPER ERROR POWER mn P Set th aper error et the paper properly PAPER p paper properly ERROR POWER RIBBON Ribbon error Set the ribbon properly PAPER ERROR POWER Restart the printer RIBBON System error If the error persists call a service PAPER representative ERROR POWER RIBBON The print heads are being cooled Head cool down PAPER This error recovers automatically ERROR 22 Troubleshooting
5. the power plug Warning on power connection Use a proper power cord for your local power supply 1 Use the approved Power Cord 3 core mains lead Appliance Connector Plug with earthing contacts that conforms to the safety regulations of each country if applicable 2 Use the Power Cord 3 core mains lead Appliance Connector Plug conforming to the proper ratings Voltage Ampere If you have questions on the use of the above Power Cord Appliance Connector Plug please consult a qualified service personnel or the distributor For the Customers in Europe This product shall not be used in the residential area This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Dai Nippon Printing Co Ltd hereby declares that this DP DS80D is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The manufacturer of this product s Dai Nippon Printing Co Ltd 1 1 1 Ichigaya Kagacho Shinjuku ku Tokyo 162 8001 Japan The importer for R amp TTE and RoHS is DNP PHOTO IMAGING EUROPE SAS ZI PARIS NORD II BP 51077 22 AVENUE DES NATIONS PARC SILIC VILLEPINTE 95948 ROISSY CDG CEDEX FRANCE If you want to dispose this product do not mix with general household waste There is a separate collection system for used electronics products in accordance with legislation under the WEEE Directive Direct
6. 99 5 EF portugu s Dai Nippon Printing Co Ltd declara que este DP DS80D est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE svenska H rmed intygar Dai Nippon Printing Co Ltd att denna DP DS80D st r I verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 1999 5 EG Introduction Thank you for purchasing this product This document explains how to handle and operate this product Please read this document carefully before use Be sure to read For Safe Operation P 4 6 and operate the product correctly For Safe Operation Be sure to read this document before using the product After reading keep it in a safe place where it can be easily accessed as needed The warnings listed here are to ensure proper use of the product to prevent physical injury to the customer or other persons and to prevent property damage Please follow these warnings m Warnings and Cautions The possible levels of injury or damage due to misuse are categorized below as Warnings and Cautions according to the degree of danger involved Accidents caused by failure to heed the warnings accompanying this symbol may lead to serious or fatal injury Accidents caused by failure to heed the cautions accompanying this symbol may lead to physical injury or property damage m Symbols The symbols shown have the following meanings This sy
7. DNP DIGITAL PHOTO PRINTER DP DS80D User s Manual Dai Nippon Printing Co Ltd Version 1 01 m Safety precautions Note that the contents of directions for use and safety precautions correspond to the safety standards as of the time this manual has been created m Remodeling For safety do not remodel this product after purchase m Copyright Copyrights trademarks or any other intellectual property rights whatsoever that pertain to documents programs or other items provided with this product are ascribed to Dai Nippon Printing Co Ltd or the respective other holders of rights Except in cases permitted by applicable laws these may not be duplicated or used without consent from Dai Nippon Printing Co Ltd English WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only This apparatus must be earthed For pluggable equipment the socket outlet be installed near the equipment and shall be easily accessible To disconnect the main power unplug the AC IN connector When installing the unit incorporate a readily accessible disconnect device in the fixed wiring or connect the power plug to an easily accessible socket outlet near the unit If a fault should occur during operation of the unit operate the disconnect device to switch the power supply off or disconnect
8. OOLNG EE 22 Stell 22 Il Le e tel EE 23 Gleaning 32 2 ee ee 27 Plalen Toller een eu nee 27 eelere CN 28 10 Duplex Printing option This product supports duplex printing when used together with the optional Turning Unit For more information about duplex printing refer to the Operating Instructions supplied with the optional Turning Unit mContents 1 Overview 2 Preparation 3 Operation 4 Cleaning and Clearing Paper Jams DP DS80D Optional Turning Unit This manual gives information only for single side printing Printer Installation Checking the contents Check that the printer and all the following accessories are included in the package Printer unit Power cord Ribbon cassette Set in the printer Remove the wrapping before using them Paper holder Paper cassette CD ROM Set in the printer Set in the printer User s manual this document Remove the wrapping before using them Explanation booklet For Safe Operation Start up guide A Caution Pay particular attention when removing the product from its package carrying it or moving it Dropping the printer may result in personal injury or property damage Do not lift the printer by grasping the wrapping materials The materials may break and cause the printer to fall 12 Printer Installation Name of components m Front of the unit Paper output LEDs Make sure to attach the blind plate when you do
9. Solving errors Release the opening lever and pull out the mechanism unit Remove the ribbon cassette front the printer unit Perform the action corresponding to the error The printer is jammed with paper see this page The ribbon is caught in the printer See P 25 The printer stopped with the paper partially cut see P 26 The power has been cut during printing see P 26 The printer is jammed with paper Pull the paper remaining in the printer in the direction shown in the picture below and cut off any wrinkled or partially printed areas evenly with a pair of scissors Printing over an already printed area will make the ribbon stick and the printer will jam again When pulling the paper out pull it slowly Applying too much strength may damage the product 23 Troubleshooting Remove the paper cassette including the attached paper holders see P 17 Cut off any damaged parts of paper that could not be cut in step and the leading edge evenly with a pair of scissors If wrinkles or partially printed areas remain it may cause the printer to jam again sCutting the paper Always cut the paper evenly Otherwise the printer may not operate correctly and may jam again Next refer to Setting the media paper ribbon see P 16 to set the media again A Caution Be careful not to hurt yourself or damage anything on the edges of the printer 24 Troubleshooting
10. The ribbon is caught in the printer Cut the ribbon Remove the ribbon carefully Any pieces of ribbon left inside the mechanism may affect the print quality If necessary clean the platen roller see Platen roller P 27 e f zji Ye Ee 3 S K j SL r fa J 4 Reattach the ribbon with tape or similar material Fix with tape Rotate the take up roller until the part attached with tape cannot be seen anymore Take up roller white Do not let a slack form when taking up the ribbon Supply side black roller Refer to The printer is jammed with paper see P 23 to remove the printed parts of paper Next refer to Setting the media paper ribbon see P 16 to set the media again 25 Troubleshooting The printer stopped with the paper partially cut Restart the printer Then release the paper and return the cutter blade to its standby position If you cannot release the paper contact a service representative Remove the partially printed part of paper from the printer Next refer to The printer is jammed with paper see P 23 The power has been cut during printin If the power is cut during printing you will not be able to pull out the mechanism unit Turn the printer on The partially printed paper will be cut into scrap size pieces and removed After this you will be able to pull out the mechanism unit only with roll paper
11. ations not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment under FCC rules This device complies with FCC radiation exposure limits set forth for an uncontrolled environment The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter Caution Use shielded cables to connect this computers Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment Table of Contents BENGE CUE ON OI MER 4 For Safe Operation ee een 4 Eaution TOR TINS CAN AU ON zuerst eier eee 7 Regulatory compliance statements ccccccsssssssssscssseseseseessseacscesesesesesesesesesesesessseeeeeseseesseseseeneeseeneneneeeneneaeaeass 9 Table OF CONTENTS sense aE 10 Duplex PrnN NGODION BEE 11 e lee n EE d RE 12 checka INE SON Bee 12 Name OF e elei int mM Sss 13 Connecting the power Cord and a computer ccssesssssessessssessesesssssesessessesecsessescsessesscsessssseseeseeseseesseaesessseseeeseeess 14 Connecting the TUNNG Uni 14 Paber and Kee DE 15 Selling Ihe media Paper ele Te RE 16 DISPOSING Of paper ecrap ecessessessessessesessssessessessessesscssessssucsessseseesessesscsnssscsucsessessessessessssucsucseeseesseseesesnesusseeseeseeseeseeseenes 21 TrOUBIESH
12. ck or damage the product Do not install the product on an unstable surface It may fall and cause injury to the user or other people Do not allow foreign objects to enter into the product They may cause an electric shock a short circuit or fire or damage the product If something falls into the product immediately turn the power off unplug the power cord and call a service representative Do not open the cover while printing This may damage the product Do not spill or spray liquids or chemicals onto the product When cleaning the cover do not use thinner trichloroethane benzene ketone based cleaners or chemically treated cloths They could discolor or deteriorate the cover At least once a year unplug the power cord and clean the prongs and the plug If dust accumulates it may cause a fire e When printing continuously for long periods in a small room be sure to ventilate the room properly If you intend to use the product on a transportation vehicle train truck ship etc please talk to a representative in advance e When disposing of the product accessories packaging materials or media paper ribbon please abide by local waste removal ordinances For details contact your local government offices e When unplugging the cord always grip the plug Do not pull on the cord as it may damage the cord and cause an electric shock or fire e When moving the product be sure to unplug the power cord O
13. elevision Otherwise radio or television reception may be adversely affected Do not use a power voltage or a frequency other than those specified Do not put anything on the power cord or step on it Do not drag or carry the product by the power cord or the USB cable e Avoid plugging the power cord into an outlet with many other cables connected Do not bundle the power cord Always grip the plug housing not the cord to plug or unplug the power cord Make certain the power is turned off before connecting or disconnecting the USB cable Avoid using a long USB cable or connecting it to any noise producing device If it is unavoidable use a shielded cable or twisted pair for each signal Use a shielded USB cable compatible with the USB 2 0 specifications Place the product near the outlet where the power cord can be unplugged easily to shut the power off e Use an AC outlet that accepts a three pronged plug Otherwise there may be a danger of electric shock Do not use the cord set supplied with the printer for other devices Use the cord set supplied for the product Only use items that are certified safe according to the standards of the country where they are to be used see the next page Make sure the blind plates are installed when not using the Turning Unit Otherwise there may be a danger of fire Make certain the power is turned off before connecting or disconnecting the Turning Units cable Do n
14. h the PULL sticker in the same orientation as show below Set it firmly all the way in D Remove the PULL sticker attached to the roll and rotate the roll in the direction of the arrow to feed the paper e As seen from above gt Feed the paper under the Feed the paper until its edge is aligned in the middle of the two holes dashed line on the paper cassette as shown in the picture on the right Pay attention to feed the paper straight If the l The two holes paper is not straight white space may appear on the edges of the printout the ribbon may wrinkle and the register may slip 9 Set the paper cassette into the printer gt The leading edge of the paper is on the rear side 18 Printer Installation Rotate the paper in the direction of the arrow to advance the leading edge until the buzzer beeps Hold the paper holder to prevent it from turning when rotating the paper When paper is correctly inserted the paper LED turns off Set the scrap box and close the front cover The printer will not print if the scrap box is not installed If the mechanism unit is closed when the scrap box is not installed the No Scrap Box error will occur and the error LED will flash see Error display P 22 Remove the ribbon cassette from the printer unit 19 Printer Installation Remove the old ribbon from the ribbon cassette and set the new r
15. ibbon Rotate the roller in Take up side the direction of the white roller arrow to take up the slack Supply side black roller Install the ribbon cassette to the printer unit Install the cassette here Install the cassette so that the supply side black roller is at the front When the mechanism unit is closed the printer starts paper initialization 4 blank sheets are output However if the power is turned on after the paper is set the paper initialization will not start Through paper initialization the outer layer of the paper that may be dirty is cut off In order to facilitate color adjustment media type recognition and print quantity management an IC chip is included in the ink ribbon Note that a ribbon with an IC chip that has not been evaluated and approved may not function properly If correct data cannot be read from the IC chip an alarm will sound In such a case ink concentration levels will be lowered in order to protect the product 20 Printer Installation Disposing of paper scrap Paper scraps generated when the paper is cut are collected in the scrap box Be sure to empty the scrap box when replacing the paper Release the opening lever and pull out the mechanism unit Lift the paper lever and raise the front cover Remove the scrap box Scrap box Hold the center and lift it up straight Close the mechanism unit The printer will not print if the
16. ications involving human life such as medical space aeronautic or other applications that require extreme reliability The product weighs approximately 14 kg 31 Ibs When moving it lift it in a way that avoids excessive physical stress Lifting recklessly or dropping the product may cause physical injury Place the product as close to an outlet as possible to be able to easily unplug the power cord in case of problem If there is dust on the plug clean it off thoroughly It may cause an electric shock or a short circuit If metal objects or liquids have fallen into the product or if there is smoke a strange odor or any other abnormality immediately turn the power off and unplug the power cord Then contact a service representative Do not continue using the product if it is not operating properly This may cause an electrical shock a short circuit or fire Be sure to ground the product Otherwise a short circuit may occur causing an electric shock or fire Do not plug or unplug the cord with wet hands This may cause an electric shock Do not open the product disassemble internal parts or modify the product It may cause an electric shock fire or injury or a product malfunction For internal check ups adjustments or repair please contact a service representative PPP a OO For Safe Operation Do not install the product in dusty or humid places This may cause fire or an electric sho
17. ive 2002 96 EC and is effective only within European Union For details consult your dealer For kundene i Norge Dette utstyret kan kobles til et IT stromfordelingssystem dansk Undertegnede Dai Nippon Printing Co Ltd erkl rer herved at folgende udstyr DP DS80D overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Nederlands Hierbij verklaart Dai Nippon Printing Co Ltd dat het toestel DP DS80D in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG suomi Dai Nippon Printing Co Ltd vakuuttaa t ten ett DP DS80D tyyppinen laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen eAANVI KA Me Tnv tmapov ca n Dai Nippon Printing Co Ltd On A w e ort DP DS80D OUNHWOPP WETAI TPOCTNSOUOIWEIGCSATAITFOEICKAI TI AO TEOXETIKECO IL ATA EI CT NGON Yy fa s 1999 5 E K magyar Alul rott Dai Nippon Printing Co Ltd nyilatkozom hogy a z DP DS80D megfelel a vonatkoz alapvet k vetelm nyeknek s az 1999 5 EC ir nyelv egy b el r sainak italiano Con la presente Dai Nippon Printing Co Ltd dichiara che questo DP DS80D conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE norsk Dai Nippon Printing Co Ltd erkl rer herved at utstyret DP DS80D er 1 samsvar med de grunnleggende krav og vrige relevante krav i direktiv 19
18. mbol indicates warning and caution messages The warning content is indicated in or near the symbol This symbol indicates prohibited actions The prohibited action is indicated in or near the symbol This symbol indicates necessary actions or instructions The action is indicated in the symbol eee For Safe Operation Use the product only with the designated voltage and frequency Improper connection may cause electric shock or fire e Avoid connecting too many devices to the outlet used for this product and using extension cords The outlet may overheat and cause a fire Do not damage cut bundle or alter the power cord Also the cord may be damaged if heavy objects are placed on it or if pulled or bent with excessive force and it may cause a fire Do not install the product in places with salinity or corrosive gases in the air This may cause a fire Do not block the vents of the product Heat may build up in the product and cause a malfunction or fire Do not stand on or place heavy objects on the product Also do not apply excessive force on the buttons switches terminals etc This may damage the product and cause injury to the user or other people Store the bag of the product out of the reach of children It may cause suffocation if placed over the head Be careful not to injure yourself or damage other things on the edges of the product Do not use this product for appl
19. nnector 322 mm W x 367 mm D x 171 mm H Temperature 5 C to 35 C in natural convection conditions Humidity 35 to 80 with no condensation Resolution Operating environment 1 Refer to the Operating Instruction supplied with the Turning Unit for the print size of print sheets when the Turning Unit is used The specifications and appearance of the printer may be changed without prior notice Customer service For information about the product operation or repair contact your dealer or a service center 28 Dai Nippon Printing Co Ltd
20. ot drag or carry the Turning Unit by the cable m Japanese users 1 ModeiNo Rating Mark of conformity PSE Model No Mark of conformity VCTF 1 25 mm 3G PSE LS 13J 125 V 12A oo voeo Raig Mark of conformity PSE m American users ModeiNo Rating Markofoonfomiy 7 a ModetNo Rating Markofoonfomiy m Sek Modelle Rating Markofeonfomiy Modell Rang Markofeonfomiy _ CSA m European users Moen Rating 1 Mark of conformity Model No Mark of conformiy KP 4819Y 250 V 10 16 A VDE FIMKO KEMA NEMKO HO5VV F GTCE 3 1 00 mm 3G OVE SEMKO KS 31A 250 V 10A CEBEC DEMKO ModelNo Rang Mark of conformity Regulatory compliance statements For the Customers in USA FCC part 15 This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense Changes or modific
21. therwise the cord may be damaged which may cause fire or an electric shock For safety when not using the product for an extended period of time be sure to unplug the power cord Otherwise it may cause an electric shock fire or a malfunction e Parts with this warning get extremely hot Do not touch these parts after printing There is a danger of burns Do not touch the gear mechanisms There is a danger of injury if fingers get caught in spinning gears Do not put your fingers inside the parts showing this mark There is a danger of injury Caution for installation Before using the product read For Safe Operation carefully and observe the instructions therein Use care when moving the product Never try to carry the product alone Dropping it may cause injury or property damage e Do not use or store the product near a fire humid places in direct sunlight near an air conditioner or heater or any other location with unusually high or low temperature strong humidity or excessive dust Do not place the product where chemical reactions occur such as in a laboratory Do not install the product where there is salinity or corrosive gas in the air The product must be installed on a firm level surface where there is ample ventilation Do not put anything on top of the product Do not use the product near a radio or television and do not use the same wall outlet for the product and a radio or t

English

Contents

Download Pdf Manuals

Related Search

Related Contents