User`s manual
Contents
1. Charge Battery Mini USB port Power Adaptor Input AC 110 220V 50 60Hz Output DC 5V 1A Power Consumption 0 5W without power output function Others Housing ABS plastic Operating Temp 100 70 Operating Humidity Less than 90 Dimensions 93mm W x 42mm D x 73mm H Weight 160g 5 Operation instruction Installation The tester can be installed on the wrist use the wrist tape to install as the picture shows 3 5 Video Tester User s Manual Power on Put the power switcher to the ON press the power button the power light will be on The power light will twinkle slowly to indicate there is no video input the screen will display the video when there is correct video signal input Power off Press the power button to turn off the device or directly put the power switcher to the OFF The device will automatically turn off when there is no video signal input long for 3 minutes Video amp audio input Plug to the accessory cable to the standard USB port the red port is for video and the yellow port is for audio When there is audio input user can press the M menu button on the top of device to turn on the speaker at this time the DC12V light will turn on in green color and twinkle press the M key again to turn off the speaker Video amp audio output Plug the 3 5mm standard AV cable to the AV output port of the device another te2. User s manual Video tester MS 35P Please read this manual carefully before you use the product Please retain it for your future reference Video Tester User s Manual 1 Introduction This video tester is designed for helping the surveillance system installations it can test the analogue video signal audio signal DC12V power output to camera it has a rechargeable battery inside with long time work period to make it to be a very helpful device for the installer 2 Safety Information 2 1 Precaution before using the tester A Read and understand the User Manual before using the product B Ensure the tester is used within each range in the specifications to avoid damaging the unit C The following operational environment should be maintained constantly Temperature 30 C 70 C Relative humidity 30 90 Recharging voltage DC12V 2 2 Precautions when using the tester A Do not use the tester in damp humidity or leaking gas environments B Do not touch the tester with moist or wet hands C Measurements may be incorrect when the tester is used in places subjected to strong magnetic fields or electromagnetic wave D Be careful not to expose the ports or joints to dirt or liquid E Do not disassemble the tester If the unit requires service or repair take the unit to the retail outlet you purchase the unit from 2 3 Precautions for battery charging and using A Use only original chargeable battery
3. r 1pcs User s Manual 1pcs 5 5
4. rminal of the cable connect the audio speaker the audio signal will keep on if there is audio signal input to the tester Power output Press the DC12V function button at this time the DC12V light will turn on in red color and keep on connect the accessory cable to the standard USB port the DC12V port can output power to camera press the function button again to turn off the function the MAX power current is 500mA the device has current and voltage protection function Recharge When there is not enough power in the battery the power light will twinkle quickly user should recharge the battery soon Use the USB cable and adapter to recharge after recharge finished the power light will turn off user also can use other mini USB recharge adapter to recharge the device Screen and volume adjustment Press button on the top to turn on off volume for the inside speaker press AY button on the top to adjust the screen lightness Light mode introduction Power Light Light Mode On Videoinput Recharge Light Light Mode Green on DC12V Light Redon Mode Redon DC12V output No light Function off Twinkle slowly No video input Twinkle quickly Recharge finished o Recharge finished 4 5 Video Tester User s Manual 6 Accessory list Tester 1pcs Power Adaptor 1pcs Power Cable 1pcs Wrist Tape 1pcs Bag 1pcs AV DC Cable 1pcs BNC to RCA Converte
5. with the tester when charge the batteries please use the original power adapter B Do not short circuit or disassemble batteries 1 5 Video Tester User s Manual 3 Appearance a 4 6 L G 2 i l 1 3 5 inch TFT screen 9 AV input DC12V power output 2 Screen protector panel 10 Mini USB recharge port 3 Power light 11 DC12V function button 4 Recharge light 12 Function button UP 5 DC output function light 13 Menu button 6 Power switcher 14 Function button DOWN 7 Power button 15 Speaker 8 AV output 16 Wrist tape 4 Features and specifications 4 1 Features Portable design fixed on the wrist Video and audio test Output DC12V power to camera 3 5 inch TFT screen 320x240 pixels Powerful rechargeable battery Super long working time up to 8 hours ABS fire prevention plastic housing 2 5 Video Tester User s Manual 4 2 Specifications Product Name Video tester Video amp Audio Test Video Format NTSC PAL automatically suitable Screen 3 5 inch TFT screen Video Input 1 channel RCA 1 0 Vp p Screen Lightness Adjustable Audio Input 1 channel RCA 0 7 Vp p Audio Output Inside speaker Power To Camera Power Output DC 12V Max 500mA Battery 2200mAh rechargeable battery inside Power amp Battery Sleeping Mode After 3 minutes without image signal Working Time Max 8 hours
Download Pdf Manuals
Related Search