User manual
Contents
1. It is prohibited to modify this machine without prior written approval of Javo BV Thermal fuses and torque limiters may not be set different upon delivery of the new machine The thermal circuit breakers should never be used to turn on off the machine This machine should be installed so that there is sufficient space remaining for providing safe instructions and or performing maintenance and or inspections Put the brakes on the castors before the machine is turned on Keep the work area clean and well lit Cluttered or dark areas invite accidents This machine is not suitable to be used outside Electrical components are only splashproof Keep the machine away from rain and moisture When using the machine in a humid environment is unavoidable you should use an RCD Keep hands hair loose clothing and or jewelry away from moving parts of the machine Wear appropriate clothing without loose parts Wear non slip work shoes As long as the machine is on no connection or safety devices may be removed The machine may only be used when all protective devices and safety related facilities are available and ready for use The automatic moving arms move trays in and out the filler are pinnate suspended to avoid serious injury when touched Nevertheless it is possible to get injured when touching Stay away from moving parts while the machine is turned on Do not stand on the machine when it is operating Never move the machine if the power cable an2. Several crates per stroke possible Other possible in consultation 1 1 Type plate e The type plate is placed onto the main cabinet door e oo Westeinde 4 2211 XP Noorwijkerhout Nederland www javo eu info javo eu Tyee JU Machine JD Gowa J Cv w EKE OA Em it Version 2014 1 2 4 7TAVa 7 Partner in Growing User Manual Javo Matrix 2 Safety This machine is built according the state of the art technique and the accredited safety regulations Despite A this the body and life from the user or third parties can be in danger when using it There could also arise damage to the machine or other goods when using it This machine is CE marked When placing multiple machines in one line the entire line must be properly CE A marked before using this machine Untill proper CE Marking of the line is carried out commissioning of this machine is prohibited 2 1 Provisions 1 10 11 12 13 14 15 16 17 18 Operation and maintenance of this machine must be performed by qualified personnel in compliance with warnings on the machine and in accordance with the user manual Keep children and other unauthorized persons away while using machine This machine is suitable for process and environmental conditions as stated in section Specifications and Tolerances of this manual only Any other use is not authorized by Javo BV and this allows the operator and or the environment at risk
3. TAVO Partner in Growing User Manual Javo Matrix 7 Maintenance Follow all instructions described in this manual in particular chapter safety Maintenance of this machine must be performed in compliance with warnings on the machine and in accordance with the user manual by qualified personnel Keep hands hair loose clothing and or jewelry away from moving parts of the machine Wear appropriate clothing without loose parts Wear non slip work shoes As long as the machine is on no connection or safety devices may be removed The machine may only be used when all protective devices and safety related facilities are available and ready for use Always unplug the plug from the socket before starting maintenance Wear personal protective equipment see section 2 3 Inform operating personnel before start maintenance Interrupt if possible the power mains before the machine is investigated or maintained by turning off the main switch and locking it and pull the plug from the socket If work must be done with power supply mains voltage on the machine work with an additional person who can operate the emergency stop gt gt gt gt PE 7 1 Required tools and equipment A set of keys is included with the machine consisting of Door key Spanner 24 27mm Spanner 17 19mm Spanner 10 13mm TOP gt 7 2 Preventive Maintenance For the following maintenance instructions normal use is considered With heavy
4. option 4 focus sensors Tray check height check Moving parts of the machine are protected by hoods and doors when the machine was delivered Version 2014 1 2 7 7 1 Ma Partner in Growing User Manual Javo Matrix 3 2 Outline drawing with main dimensions 5000 Matrix Version 2014 1 2 8 7TAVa 7 Partner in Growing User Manual Javo Matrix 3 3 Options Depending on the intensity of use and customer requirements this machine can be equipped with various options Contact your sales consultant Options Code Specifications S 4 meter 5x1 5 cable incl 16A plug 10mtr 5x1 5 cable incl plug and connector 20mtr 5x1 5 cable incl plug and connector Substrate bin increase Format set 6 plates for other tray dimensions JMTX PB FOR or other tray pattern re Machine in 2 colors RAL 1 main color en 1 spot color Mitre control system Extra power outlet with constant power supply Extra power outlet with JPME EL WCDG switching power supply A Application machine without 0 in net Phase sequence protection 3 4 Operation The soil bin is filled with substrate Substrate is transported with the substrate conveyor to the elevator The elevator transports substrate with a conveyor to the rotor Trays with are provided through the tray infeed conveyor The rotor divides substrate evenly over the full width of the tray in the cells pots of the tray An equal amount of substrate
5. E aa ico sonia casa RSS ee eee ce Dogs Hess sete Duas ness E DE Ra O Da RES ss 16 6 2 DO Didi cep tite ances Sree OE RD Ud 16 6 3 EVE CINCY SCO assado E E E E sumone as andando Raid 16 7 Maintenance acssvircsccssinsdeeevacristavacnrenavedersmaswosetasvosicsawederasanconsuueueedsasasueseecanendavevaeduabosues louetessteoasunniescsencsseueteaes 17 7 1 Required tools and equipment cccccccsesececcesecccceesccecsusececcuneccceeusececeusececeenecceseusecessuneceseuneceesensecetsunecetsenes 17 7 2 Preventive MaintenaNCE DR RR DRE RD RR ee ee RR 17 7 3 BIE Ve COl Cle MINE cien siso saia Doro S aa DSO COS D UG cesaneecssaoes 18 7 4 MS Seyi I cia sapc ce ieee ers go St serves i ne aio noc ae sets aC DO SC ad Dad 18 7 5 Fe IU RR SR DR PER RNA O IRD CORNER RIR E IR RV eaten verse cies 19 Version 2014 1 2 2 7TAVa 7 User Manual Javo Matrix Partner in Growing 7 6 Bie e ES E E I O E E E E A E E DR O RD EE 19 7 7 Fe Ee E E O EEE E A E EE E EE E bane E T A E EEE 20 7 8 NAN go o POR RD SRD E EPE E A E NE eames ENE E EEE PEES E E TE E E EE 20 7 9 Customer UPPOO aNd AQUICO ser EEEE E EE EEEE E EE 20 8 Disposal of machine or machine parts sessssesessessssesessecsssecossseosssesssoessscesssossssoesssoecssoscsssessssessesesssossssoseee 20 9 EG conformity Slat COI asec sicneccacieveccanesnesceaneveveeavictiecuacens CAES AUS dE Sa SR Rea cid sd dg 21 Version 2014 1 2 TAVO 7 Partner in Growing User Manual Javo Matrix 1
6. Technical specifications and tolerances This machine is intended to be used for filling trays automatically with substrate only This machine is meant for processing trays substrate and other materials that are described in this manual only Detailed operation of the machine is described in section Operation This machine may be used only within the limits for specifications and tolerances of the order on the assembly drawing and indicated in this manual If the machine is used outside these specifications Javo BV can not take responsibility for this machine This machine is intended for products as agreed in the order confirmation only To ensure the proper operation of this machine only products with specifications and tolerances as specified in the order may be used Do not use the machine for purposes other than the intended purpose of Javo BV This can lead to damage and danger to the operator and its environment This machine is CE marked When placing multiple machines in one line the entire line must be properly CE marked before using this machine Untill proper CE Marking of the line is carried out commissioning of this machine is prohibited gt gt gt gt Specifications Machine appropriate for Capacity Voltage Machine connection Power consumption Weight Dimensions LxWxH Height conveyor Content substrate bin 700 Litre Conveyor belt in Conveyor belt out Format set Year of construction Type product
7. file The wiring diagrams are included in the electrical cabinet of the machine Version 2014 1 2 19 TAVO 7 Partner in Growing User Manual Javo Matrix 7 7 Spare parts Only original spare parts and accessories of Javo BV may be used on the machine Javo BV advises you to take certain parts in stock because of wear sensitivity and or any expected downtime for re ordering of the parts The spare parts list can be found on the assembly drawings These can be found on JavoNet When ordering Spare parts at Javo BV the following information must be included drawing number item number desired length if applicable and the desired number of pieces 7 8 JavoNet We recommend you to register your machine on JavoNet This way you get online access to all technical drawings and documents pertaining to your machine Visit our website www javo eu for more information and to request an account JavoNet 7 9 Customer support and advice Our technical department will answer your other questions about repair and maintenance of your machine and spare parts We can help you with any questions regarding the purchase use and settings of products and accessories 8 Disposal of machine or machine parts Follow all instructions described in this manual in particular chapter safety Perform the following steps when disposing the machine 1 Decommission the machine and remove electric and pneumatic power 2 Drain and r
8. Partner in Growing User Manual Original document version 2014 1 2 Matrix Machine nr eternas Matrix Javo BV PO Box 21 2210 AA Noordwijkerhout Holland T 31 0 252 343121 F 31 0 252 377423 info javo eu WWW javo eu All rights reserved The information provided herein may not be reproduced and or published in any form by print photo print microfilm or any other means whatsoever electronically or mechanically without the prior written authorisation of JAVO BV 7TAVa 7 Partner in Growing User Manual Javo Matrix Preface This user manual is written for anyone working on or with the machine Before working on or with the machine first read this manual This user manual contains important instructions information on how to use the machine in a safe professional and economical way and must always be available where the machine is used In addition to this user manual the mandatory rules and regulations for accident prevention and environmental protection in the country and place of use of the machine must also be observed This user manual contains information on the operation of the machine with all the possible options Use only the information that applies to your machine Depending on the intensity of use and customer requirements this machine can be equipped with various options Contact your sales consultant Supplier details if not directly supplied by Javo f BV Dealer stamp Javo BV is n
9. afety devices may be removed The machine may only be Keep hands hair loose clothing and or jewellery away from moving parts of the machine Wear A used when all protective devices and safety related facilities are available and ready for use Version 2014 1 2 12 7TAVa 7 Partner in Growing User Manual Javo Matrix 5 4 Placing format set plates For placing Format sets the machine fence can be removed The machine will stop automatically To rotate the carousel to the next position use the 2 hand control buttons Placing format set plates is easy The dowel pins on the plates should be placed in the recesses 5 5 Set height of format sets Check the height of the format sets compared to the rotorbin and substrate slide before you start working with the machine When changing format set plates the height needs to be adjusted On the deposit place for format set plates the height of the set in relation to the substrate slide and rotorbin is visible If the plates are positioned too high plates run against a sensor that will turn off circulating movement of the machine In order to prevent that this sensor is turned on set the format set plates at the appropriate height in relation to the substrate slide and rotorbin for every format set plate Use the handles above the format set to set the correct height 5 6 Check rotation direction Check the rotation direction of the elevator before you start workin
10. bed above Warn directly Javo BV Version 2014 1 2 18 Java 7 Partner in Growing User Manual Javo Matrix 7 5 Fault list Problem Possible cause Action Solution 10 of the rated motor voltage Replace fuse Too little cooling air caused by a Ensure proper inlet and outlet of the cooling air clogged cooling air passage The motor hums and takes Defect winding Repair or replace the motor winding too much power Fuses are blown Short circuit in wiring or motor Rectify the short circuit Motor short circuit to housing or Turn to a repair shop to fix the short circuit has a short in the windings Motor is connected incorrectly Connect the motor correct Minimum substrate in the Too little substrate in the bin Fill the bin with substrate trays Elevator provides little substrate Set the substrate conveyor faster the reset button pulled circuit by pressing the reset button R Emergency stop button not reset eset the safety circuit by pressing the reset button Breaker tripped in main cabinet See why circuit breaker has tripped Remove obstacles to conveyors Switch on the machine after solving the problem voltage loss other devices on the same group Control switch for height format Set Format set so height in a way that sensor sets is operated remains down Remove excess soil at the sensor Remove misfed trays 7 6 Drawings and schemes The drawings accompanying this machine are supplied in a separate
11. d or pneumatic supply is still connected Prescribed checks and maintenance in the user manual must be observed Allow the machine to be serviced and repaired by qualified personell only with original replacement parts In addition to the user manual generally applicable statutory and other regulations regarding accident prevention and environmental protection have to be respected This is also referred to handling of personal protective equipment Inform operating personnel before start maintenance Interrupt if possible the power mains before start machine investigation or maintenance by turning off the main switch and locking the main switch Pull the plug from the wall socket a As work must be done with power supply mains voltage on the machine then arrange an additional person who can operate the emergency stop When a machine part is damaged or not working in the prescribed manner the work must be interrupted immediately Resumption allowed only when the machine part is repaired or replaced and checked Consult your dealer if the machine is not functioning properly Machine and or parts must be disposed in accordance with local laws and regulations Version 2014 1 2 5 7TAVa 7 Partner in Growing User Manual Javo Matrix 2 2 Safety devices on the machine Caps and doors are screening moving parts Always place back caps and close doors before the machine is turned on Caps and doors should remain closed while operating t
12. e commissioning of this machine is prohibited The automatic moving arms move trays in and out the filler are pinnate suspended to avoid serious injury when touched Nevertheless it is possible to get injured when touching Stay away from moving parts while the machine is turned on 5 1 Placement The machine must be placed on a flat surface with sufficient weight capacity Install the machine so that there is enough space left for service providing safe instructions and or cleaning maintenance and or inspections Put the brakes on the castors before the machine is turned on This machine is not suitable to be used in the open air Electrical components are only splashproof Keep the machine away from rain and moisture When using the machine in a humid location is unavoidable you should use an RCD 5 2 Facilities to take care of by the user Prior to delivery of the machine the required materials and facilities air power substrate etc needs to be present within 3 meters of machine Required power supply 400 Volt 3 Phase Neutral Earth N America 208 220V 60Hz 5 3 Mounting Connecting If applicable the components supplied are to be mounted on the machine Make sure that the moving parts are free If the machine is complete it can be connected by a competent person to the power supply appropriate clothing without loose parts Wear non slip work shoes As long as the machine is on no connection or s
13. emove all consumables 3 Scrap the machine according to the local legislation Version 2014 1 2 20 7TAVa 7 Partner in Growing User Manual Javo Matrix 9 EG conformity statement EG conformity statement for machines directive 2006 42 EG annex II under A Ce Javo BV Westeinde 4 2211XP Noordwijkerhout The Netherlands Declares that Machine Matrix Type is in accordance with the Machine directive 2006 42 EG and complies with the provisions of the EMC directive 2004 108 EEG Complies with the harmonized European Standards Harmonized Harmonized ee definition definition European standard European standard NEN EN ISO eatery ot machinery Basic Goncepts papo Saieay ol machinery Riskassessm nt Pait2 principles f ign Part 1 12100 2010 A E Eid a rae 2 2010 Practical guidance and examples of methods Basic terminology methodology Safety of machinery Safety distances Safety of machinery Parts of Control Systems NEN EN ISO 13857 to prevent hazard zones being reached NEN EN ISO 13849 1 with a safety function Part 1 General by the upper and lower limbs principles for design Safety of machinery Electrical NEN EN IEC 60204 1 equipment of machines Part 1 NEN EN 13850 General requirements Safety of machinery Emergency stop Principles for design The Netherlands Noordwijkerhout Cees Bouwmeester October 2014 Director Version 2014 1 2 21
14. g with the machine Procedure 1 Connect the power cable 2 Start the elevator a Turn on the main switch b Press the reset button emergency stop circuit c Start the elevator with the elevator button Check the direction of rotation of the elevator Stop the elevator by turning the filler off Turn off the main switch When rotation direction is incorrect a Remove the plug from the socket b Open the plug and switch 2 of the 3 phases in the plug This should only be carried out by suitably qualified personnel A ae Version 2014 1 2 13 7TAVa wy Partner in Growing User Manual Javo Matrix 5 7 Check elevator chain tension Check the elevator chain tension before you start working with the machine Procedure 1 Check the elevator chain tension The correct tension is obtained when the chain in the middle deflects 10mm 2 Adjust the chain tension if necessary a The tension can be adjusted using the two clamping nuts located on opposite sides of the elevator housing b Tighten the nuts A on both sides of the elevator equally The tension of the chain should not be too tight 5 8 Check substrate conveyor tension Check the substrate conveyor belt tension before you start working with the machine Procedure 1 Check the substrate conveyor belt tension The correct tension is obtained when the belt in the middle deflects 40mm 2 Adjust the belt tension if necessary a Loosen the fou
15. g without loose parts Wear non slip work shoes As long as the machine is on no connection or safety devices may be removed The machine may only be used when all protective devices and safety related facilities are available and ready for use If a machine part is damaged or not working in the prescribed manner work must be interrupted immediately Resumption allowed only when the machine part is repaired or replaced and checked Consult your dealer if the machine is not functioning properly The automatic moving arms move trays in and out the filler are pinnate suspended to avoid serious injury when touched Nevertheless it is possible to get injured when touching Stay away from moving parts while the machine is turned on 6 1 Start Start procedure 1 Turn on the main power at the electrical cabinet 2 Turn on the filler 3 Press the blue reset button 4 Press the green start button to start the machine 6 2 Stop Stop procedure 1 Press the red stop button on the control panel 6 3 Emergency stop Emergency stop procedure 1 Restart after emergency stop procedure 1 e a Press the red emergency stop button on the machine to activate the emergency stop Ensure that the cause of the emergency is resolved Close all doors and covers Pull the red emergency stop button to reset Press the reset button Press the green button on the control panel to start the machine Version 2014 1 2 16
16. he machine The motors of the machine are protected against overload by thermal switches These switches are located in the control box 2 3 Explanation of icons and symbols Read and understand this manual before using the machine and or performing maintenance Remove Power mains B Wear during all work on or with the machine safety shoes and safety glasses Wear during cleaning and maintenance work on this machine also safety gloves and protective clothing Warning Important points and or instructions regarding safety and or injury prevention are marked with this warning sign A Dangerous electrical voltage TN Dangerous electrical voltage present N Risk of crushing 1 65 Danger of moving or rotating parts It is forbidden to wear Loose clothing long hair and or jewelry nearby moving parts of the machine Do not rinse control cabinet Danger of moisture in the cabinet when it is rinsed with water Direction of movement Speed ground feeder Speed ground feeder curved straight Rotor Rotofill Version 2014 1 2 6 Java Nar Partner in Growing User Manual Javo Matrix 3 Description of the manchine D l Ma trix 3 1 Machine overview rA cCTIONMOO DD Substrate bin Elevator Exit substrate Substrate entrance in carousel Brush unit Format set plates exchange position Format set plate Substrate retour conveyor Tray entrance conveyor Tray exit conveyor Rotor Mitre check
17. is divided in all the tray cells pots The filled tray is transported and passes a substrate slide At the substrate slide the excess substrate is removed from the tray The tray is then evenly levelled by the brush unit The remaining substrate on top of the format sets is returned to the ground retour conveyor with a brush unit Trays are transported further and finally fed out at the tray exit conveyor The machine is equipped with wheels which makes the machine easy to move 3 5 Machine workstations This machine has two operator places at the start of the infeed conveyor belt and at the end of the outfeed conveyor belt Version 2014 1 2 9 Java wy Partner in Growing User Manual Javo Matrix 3 6 Controls The machine is controlled with the control panel This control panel is flexible around the machine to be used by means of a cable The control panel consists of the following buttons Emergency stop button Filler off on switch Miter off on switch Start button Stop button Reset button nmo At the electrical cabinet of the machine these buttons and connectors are placed A Main switch B Power mains cable C Power transit cable The machine is equipped with emergency stop buttons D Emergency stop button For changing Format sets the machine fence can be removed The machine will stop automatically To rotate the carousel to the next position use the 2 hand control buttons Ver
18. or is over the tray the softer the ground tension will be c Tighten clamp A The substrate slide moves with the height adjustment of the rotorbin Adjust slide after setting the rotor A height 5 11 Set substrate slide height The substrate slide is placed after the compactor The substrate slide has the function to shift the excess of substrate off the tray A Set the position of the substrate slide before you start working with the machine Procedure 1 Check the height of the substrate slide with respect to the tray The slide should be placed approximately 15mm above the tray 2 Ifthe height is incorrect a Loosen wing nut A b Set the substrate slide to the desired height c Tighten wing nut A 5 12 Set brush height Q Set the brush height before you start working with the machine Procedure 1 Check the height of the brush with respect to the tray The slide should be placed approximately 5mm above the tray The brush is intended to evenly level the substrate in the tray 2 Ifthe height is incorrect a Loosen clamp A b Set the desired height using crank B c Tighten clamp A Version 2014 1 2 15 TAVO Partner in Growing User Manual Javo Matrix 6 Operation A A A A A Follow all instructions described in this manual in particular chapter safety Keep hands hair loose clothing and or jewelry away from moving parts of the machine Wear appropriate clothin
19. ot responsible for any errors in this manual or the consequences thereof Javo BV is not liable for damage or consequential damage caused by operating errors lack of expert maintenance and any use other than described in this manual The liability of Javo BV also expires once modifications or additions are made without written permission of Javo BV This machine is suitable for process and environmental conditions as stated in section Specifications and Tolerances of this manual Any other use is not authorized by Javo BV and this allows the operator and or its environment at risk Version 2014 1 2 1 7TAVa 7 Partner in Growing User Manual Javo Matrix Table of contents 1 Technical specifications and tolerances ssssesessesessessssesesseossssossoesssossssossssossssoesssoesssoesssossssosssesssososssesseseo 4 1 1 TYPE E c E E E S E A EE I ETE E E E E E EE ETA 4 2 SA V EA E E E RS 5 2 1 FP HO WISN WIG eera E oi auca nas racer E E E EEEE E ideas 5 2 2 Safety devices onthe Mach asse ct sensetaeenatcscacnnaseeuci honda Sos nd da Sad 6 2 3 Explanation Or Icons and SV INDO IS sssasgdsgse ipninana ndo d ando gaia nadas dade ainsi inda assada adidas de adia 6 3 Description of the manchine s ssesessesesssssssssessscecssoesssoessscssossssosossoeosssecssssoseseossssossssossossssossssoesssossssoesssoeoe 7 E E E E E E E E E cine Sendnnassevonsce ane itvadaecvonssse 7 3 1 MaE OVW oea a E E A E E E E E E 7 3 2 OUTING drawing
20. r screws B to the block bearings b The tension can be adjusted by simultaneously turning both sides of the ground belt A c Tighten the four screws B to the block bearings 5 9 Set substrate conveyor speed Set the substrate conveyor speed before you start working with the machine Procedure 1 Check the substrate conveyor speed Set the speed in this way that trays are being filled sufficiently before they reach the substrate slide Only adjust the substrate conveyor speed when motors are running If the level sensor for the substrate conveyor will not occasionally turn off then the speed of the conveyor is A set too low 2 When the speed needs to be adjusted a Loosen locking bar A b Turn wheel B i CCW substrate conveyor will run slower ii Clockwise the speed of the conveyor is increased c Tighten locking bar A Version 2014 1 2 14 TAVO 7 Partner in Growing User Manual Javo Matrix 5 10 Set compactor height Set the compactor height before you start working with the machine Procedure 1 Check the compactor height with respect to the tray The compactor should not touch the format set plates There A should be a gap of about 10mm 2 Ifthe height is incorrect a Loosen clamp A b Turn the compactor to the desired height with crank B i The lower the compactor is over the tray the harder the ground tension will be ii The higher the compact
21. sion 2014 1 2 10 TAVO 7 Partner in Growing User Manual Javo Matrix 4 Transport Follow all instructions described in this manual in particular chapter safety On delivery of the machine a Javo mechanical engineer must be present to unload the machine from the freight wagon Prior to moving the machine the electrical and pneumatic power should be disconnected Make sure the cables are stowed sufficiently When moving within the company when the machine does not need to be lifted the state of the machine should be checked Make sure the path to be traveled is free so the machine can be moved to the desired position without obstacles If the machine is to be lifted for movement outside the company please contact your dealer or contact a professional shipping company The machine must be transported upright The relative humidity should not be too high so that water condenses in the machine Report damage during or immediately after delivery to the transport company and to Javo BV Take all necessary steps to prevent further damage Version 2014 1 2 11 TAVO wy Partner in Growing User Manual Javo Matrix 5 Mounting installation and commissioning Follow all instructions described in this manual in particular chapter safety This machine is CE marked When placing multiple machines in one line the entire line must be properly CE A marked before using this machine Up to CE Marking of the lin
22. use or use under extreme conditions maintenance should be performed at shorter intervals tem Axper Comments S Machine Day Check if moving parts are functioning correctly and not clamping and or parts are broken or damaged in such a way that the operation is adversely affected Have damaged parts repaired before use Elevator and belts Check tension See section Mounting installation and commisioning Materials in the machine Day Remove trays or other material that has fallen into the machine before starting the machine Version 2014 1 2 17 7TAVa wy Partner in Growing User Manual Javo Matrix 7 3 Elevator cleaning The blades of the elevator must be cleaned regularly in order to prevent excessive wear Procedure 1 Loosen the two guards of the elevator using the supplied door key and remove it from the machine Spray the blades of the elevator A and the elevator chain with compressed air Attach the two guards of the elevator using the supplied key on the machine 7 4 Test safety circuit Procedure 1 a eo Ta A Start the machine Press the emergency stop button The machine is now disabled Pull the Emergency Stop button The machine remains off Press the reset button emergency stop circuit All possibly connected conveyors start moving Start the machine The machine must not be used when going through the above process the machine responds differently than descri
23. with main OIMENSIONS viessescsevsesasccecanscecevcsdcsedcanavssuuconessacdedesinndeaaucdisadsatawearactacdaiestneduaeweasenteeaece 8 3 3 OPON ass rte an tls A E sets E E E E E E deuduen sentees 9 3 4 Ejo E AO aN E E E A A E E E E T E E E 9 3 5 Machine Works tatio MS Gino ea 9 3 6 CONTO E E E E A E 10 SPON E ET 11 Mounting installation and commissioning ccscscsccccscscsccccscsccccccscsceccecscscncsccececscecescccscscescecscuceseecececeees 12 5 1 FAC E E E E E E E E mens 12 5 2 Facilities to take care of DY the USEI sssessseesesreessrerssrrresrrrresrrressrerosrrressrereserressreresererssreresereresrereserereseerese 12 5 3 Niountine CONN E e A E E AE AA E EA 12 5 4 Ae O E E E E E E E E A E T E E 13 5 5 SOG TG OF TONNI SOS e E E E E E 13 5 6 CHECK TO aO OECO es 13 5 7 Check elevator chain tension cscccccccccccsesssseecccccseuesseseccccessaeessseeeeceessaeesseeeeeeeessaueesseeeeeesssauasseeeseeeessagansses 14 5 8 Check Substrate conveyor tENSION cccccccssseccccseccccessccccaesececeusececcueceeceusececeuneceseeneceeseunecessunecessegeceetaneeeetas 14 5 9 SEC subsifale CONVEY Ol DECO seas fannie settee EA O 14 do SOU CON AGC De Ei ernn a a Pd antares ots io nas sido bg encased needseun pay diga 15 SAL SOU SUSE Ae SOS MCN ORDER cause ERP SERRO RP DN S 15 2 Setbrush NGS sides porosa Reside Riad oa RUE E ng eb eee 15 O OPON seis acao sra a a ada UCS ad a Ea a ade RS CSS a Rica Sds Caic 16 6 1 DR as pace nas eee ice Desa
Download Pdf Manuals
Related Search